Skip to contentSkip to conversation

Banan Pro (ahci-sunxi) SATA port stopped working after switching to U-Boot v2016.01

U-Boot Markus Baier 2 participants 2 messages Jan 17, 2016 – Jan 19, 2016

lore
Share & tools
lore

Markus Baier

author
#0 lore raw

Hello,

tonight I switched to the new U-Boot v2016.01 on my Banana Pro system.
I compiled u-boot, like I did with all the working versions before, with:
make Bananapro_defconfig
make

But with the new U-Boot installed the SATA Port did not work anymore.
The Kernel is the same 4.0.9-gentoo as I used before with the last U-Boot Release v2015.10

dmesg show me the following error in the kernel log:

[    1.925032] ahci-sunxi 1c18000.sata: PHY power up failed.
[    1.930661] ahci-sunxi: probe of 1c18000.sata failed with error -5

I also see now SATA message at the U-Boot bootscreen, the v2015.10 shows me that a SATA Port was recognized by the U-Boot loader.

Regards
Markus Baier

#1 lore raw
Quoted 14 lines · Markus Baier

Hello,

tonight I switched to the new U-Boot v2016.01 on my Banana Pro system.
I compiled u-boot, like I did with all the working versions before, with:
make Bananapro_defconfig
make

But with the new U-Boot installed the SATA Port did not work anymore.
The Kernel is the same 4.0.9-gentoo as I used before with the last U-Boot Release v2015.10

Quoted 7 lines

dmesg show me the following error in the kernel log:

[    1.925032] ahci-sunxi 1c18000.sata: PHY power up failed.
[    1.930661] ahci-sunxi: probe of 1c18000.sata failed with error -5

I also see now SATA message at the U-Boot bootscreen, the v2015.10 shows me that a SATA Port was recognized by the U-Boot loader.

Can you please use git bisect to determine which commit broke this? Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160119/ffd84329/attachment.sig>