Skip to contentSkip to conversation

ASoC: wm8960: Fix input boost mixer left/right naming

PATCH Superseded [email protected] 3 participants 8 messages Jan 19, 2016 – Jan 22, 2016

Subsystems (3)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: wm8960: Fix input boost mixer left/right naming

From: Stuart Henderson <[email protected]>

INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly.

---
 sound/soc/codecs/wm8960.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
sound/soc/codecs/wm8960.c +4 -4
index ff23772..7f20fb2 100644
@@ -240,13 +240,13 @@ SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
 SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
 	7, 1, 1),
 
-SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
+SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
 	       WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv),
-SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
+SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
 	       WM8960_INBMIX1, 1, 7, 0, lineinboost_tlv),
-SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
+SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
 	       WM8960_INBMIX2, 4, 7, 0, lineinboost_tlv),
-SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
+SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
 	       WM8960_INBMIX2, 1, 7, 0, lineinboost_tlv),
 SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT1 Volume",
 		WM8960_RINPATH, 4, 3, 0, micboost_tlv),
Signature · 1 line
2.1.4
#1 lore raw

PATCH 1/1 ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode

From: Stuart Henderson <[email protected]>

With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK.

Fixes 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function")
---
 sound/soc/codecs/wm8960.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
sound/soc/codecs/wm8960.c +17 -15
index 7f20fb2..d7f444f 100644
@@ -643,29 +643,31 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
 		return -EINVAL;
 	}
 
-	/* check if the sysclk frequency is available. */
-	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
-		if (sysclk_divs[i] == -1)
-			continue;
-		sysclk = freq_out / sysclk_divs[i];
-		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
-			if (sysclk == dac_divs[j] * lrclk) {
+	if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
+		/* check if the sysclk frequency is available. */
+		for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+			if (sysclk_divs[i] == -1)
+				continue;
+			sysclk = freq_out / sysclk_divs[i];
+			for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
+				if (sysclk != dac_divs[j] * lrclk)
+					continue;
 				for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
 					if (sysclk == bclk * bclk_divs[k] / 10)
 						break;
 				if (k != ARRAY_SIZE(bclk_divs))
 					break;
 			}
+			if (j != ARRAY_SIZE(dac_divs))
+				break;
 		}
-		if (j != ARRAY_SIZE(dac_divs))
-			break;
-	}
 
-	if (i != ARRAY_SIZE(sysclk_divs)) {
-		goto configure_clock;
-	} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
-		dev_err(codec->dev, "failed to configure clock\n");
-		return -EINVAL;
+		if (i != ARRAY_SIZE(sysclk_divs)) {
+			goto configure_clock;
+		} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
+			dev_err(codec->dev, "failed to configure clock\n");
+			return -EINVAL;
+		}
 	}
 	/* get a available pll out frequency and set pll */
 	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
Signature · 1 line
2.1.4
Reviewed-by on v1 1/1
#2 lore raw

Re: [PATCH] ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode

Quoted 8 lines · On Tue, Jan 19, 2016 at 01:09:09PM +0000, [email protected]…

From: Stuart Henderson <[email protected]>

With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK.

Fixes 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function")

---

Thanks,
Charles

maintainer
#3 lore raw

Re: [PATCH] ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode

In reply to [email protected]
Quoted 1 line · On Tue, Jan 19, 2016 at 01:09:09PM +0000, [email protected]…

From: Stuart Henderson <[email protected]>

I'm moderately sure that "[email protected]" is the same person but it'd be a lot better if everything joined up. Please also note that if your mail server adds any unfortunate disclaimers or anything you probably don't want community e-mails going to there.

#4 lore raw

Re: [PATCH] ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode

Quoted 2 lines · Mark Brown

I'm moderately sure that "[email protected]" is the same person but it'd be a lot better if everything joined up.

I'm happy to respin the patches using the o.wm.com email address if that makes things easier.

Stu

maintainer
#5 lore raw

Applied "ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode" to the asoc tree

In reply to [email protected]

The patch

ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 6bb7451429084cefcb3a18fff809f7992595d2af Mon Sep 17 00:00:00 2001

From: Stuart Henderson <[email protected]>
Date: Tue, 19 Jan 2016 13:09:09 +0000
Subject: [PATCH] ASoC: wm8960: Fix WM8960_SYSCLK_PLL mode

With the introduction of WM8960_SYSCLK_AUTO mode, WM8960_SYSCLK_PLL mode was made unusable. Ensure we're not PLL mode before trying to use MCLK.

Fixes 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function")
---
 sound/soc/codecs/wm8960.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
sound/soc/codecs/wm8960.c +17 -15
index 66057f853fae..4b4401329591 100644
@@ -631,29 +631,31 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
 		return -EINVAL;
 	}
 
-	/* check if the sysclk frequency is available. */
-	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
-		if (sysclk_divs[i] == -1)
-			continue;
-		sysclk = freq_out / sysclk_divs[i];
-		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
-			if (sysclk == dac_divs[j] * lrclk) {
+	if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
+		/* check if the sysclk frequency is available. */
+		for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+			if (sysclk_divs[i] == -1)
+				continue;
+			sysclk = freq_out / sysclk_divs[i];
+			for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
+				if (sysclk != dac_divs[j] * lrclk)
+					continue;
 				for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
 					if (sysclk == bclk * bclk_divs[k] / 10)
 						break;
 				if (k != ARRAY_SIZE(bclk_divs))
 					break;
 			}
+			if (j != ARRAY_SIZE(dac_divs))
+				break;
 		}
-		if (j != ARRAY_SIZE(dac_divs))
-			break;
-	}
 
-	if (i != ARRAY_SIZE(sysclk_divs)) {
-		goto configure_clock;
-	} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
-		dev_err(codec->dev, "failed to configure clock\n");
-		return -EINVAL;
+		if (i != ARRAY_SIZE(sysclk_divs)) {
+			goto configure_clock;
+		} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
+			dev_err(codec->dev, "failed to configure clock\n");
+			return -EINVAL;
+		}
 	}
 	/* get a available pll out frequency and set pll */
 	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
Signature · 1 line
2.7.0.rc3
maintainer
#7 lore raw

Applied "ASoC: wm8960: Fix input boost mixer left/right naming" to the asoc tree

In reply to [email protected]

The patch

ASoC: wm8960: Fix input boost mixer left/right naming

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 95826a37991de87659e21b3649f265a049724aa2 Mon Sep 17 00:00:00 2001

From: Stuart Henderson <[email protected]>
Date: Tue, 19 Jan 2016 13:09:08 +0000
Subject: [PATCH] ASoC: wm8960: Fix input boost mixer left/right naming

INBMIX1 controls LINPUTs and INBMIX2 controls RINPUTs, so fix the naming accordingly.

---
 sound/soc/codecs/wm8960.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
sound/soc/codecs/wm8960.c +4 -4
index 5380798883b5..66057f853fae 100644
@@ -231,13 +231,13 @@ SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
 SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
 	7, 1, 1),
 
-SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
+SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
 	       WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv),
-SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
+SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
 	       WM8960_INBMIX1, 1, 7, 0, lineinboost_tlv),
-SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
+SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
 	       WM8960_INBMIX2, 4, 7, 0, lineinboost_tlv),
-SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
+SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
 	       WM8960_INBMIX2, 1, 7, 0, lineinboost_tlv),
 SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT1 Volume",
 		WM8960_RINPATH, 4, 3, 0, micboost_tlv),
Signature · 1 line
2.7.0.rc3