xilinx-ppc4xx: Cleanout and port to DM serial

ml507 is just a specialized version of the xilinx-ppc440-generic

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 arch/powerpc/cpu/ppc4xx/Kconfig  |  4 ----
 board/xilinx/ml507/Kconfig       | 12 ------------
 board/xilinx/ml507/MAINTAINERS   |  7 -------
 board/xilinx/ml507/Makefile      | 11 -----------
 board/xilinx/ml507/ml507.c       | 17 -----------------
 board/xilinx/ml507/xparameters.h | 23 -----------------------
 configs/ml507_defconfig          |  9 ---------
 configs/ml507_flash_defconfig    |  8 --------
 include/configs/ml507.h          | 38 --------------------------------------
 9 files changed, 129 deletions(-)

 delete mode 100644 board/xilinx/ml507/Kconfig
 delete mode 100644 board/xilinx/ml507/MAINTAINERS
 delete mode 100644 board/xilinx/ml507/Makefile
 delete mode 100644 board/xilinx/ml507/ml507.c
 delete mode 100644 board/xilinx/ml507/xparameters.h
 delete mode 100644 configs/ml507_defconfig
 delete mode 100644 configs/ml507_flash_defconfig
 delete mode 100644 include/configs/ml507.h

ml507 is just a specialized version of the xilinx-ppc440-generic

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

ml507 is just a specialized version of the xilinx-ppc440-generic

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  arch/powerpc/cpu/ppc4xx/Kconfig  |  4 ----
  board/xilinx/ml507/Kconfig       | 12 ------------
  board/xilinx/ml507/MAINTAINERS   |  7 -------
  board/xilinx/ml507/Makefile      | 11 -----------
  board/xilinx/ml507/ml507.c       | 17 -----------------
  board/xilinx/ml507/xparameters.h | 23 -----------------------
  configs/ml507_defconfig          |  9 ---------
  configs/ml507_flash_defconfig    |  8 --------
  include/configs/ml507.h          | 38 --------------------------------------
  9 files changed, 129 deletions(-)

delete mode 100644 board/xilinx/ml507/Kconfig delete mode 100644 board/xilinx/ml507/MAINTAINERS delete mode 100644 board/xilinx/ml507/Makefile delete mode 100644 board/xilinx/ml507/ml507.c delete mode 100644 board/xilinx/ml507/xparameters.h delete mode 100644 configs/ml507_defconfig delete mode 100644 configs/ml507_flash_defconfig delete mode 100644 include/configs/ml507.h

It is just a specialized version of the xilinx-ppc405

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 arch/powerpc/cpu/ppc4xx/Kconfig  |  4 ----
 board/avnet/fx12mm/Kconfig       | 12 ----------
 board/avnet/fx12mm/MAINTAINERS   |  7 ------
 board/avnet/fx12mm/Makefile      | 11 ---------
 board/avnet/fx12mm/fx12mm.c      | 34 ---------------------------
 board/avnet/fx12mm/xparameters.h | 35 ----------------------------
 configs/fx12mm_defconfig         | 10 --------
 configs/fx12mm_flash_defconfig   |  9 --------
 include/configs/fx12mm.h         | 50 ----------------------------------------
 9 files changed, 172 deletions(-)

 delete mode 100644 board/avnet/fx12mm/Kconfig
 delete mode 100644 board/avnet/fx12mm/MAINTAINERS
 delete mode 100644 board/avnet/fx12mm/Makefile
 delete mode 100644 board/avnet/fx12mm/fx12mm.c
 delete mode 100644 board/avnet/fx12mm/xparameters.h
 delete mode 100644 configs/fx12mm_defconfig
 delete mode 100644 configs/fx12mm_flash_defconfig
 delete mode 100644 include/configs/fx12mm.h

It is just a specialized version of the xilinx-ppc405

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

It is just a specialized version of the xilinx-ppc405

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  arch/powerpc/cpu/ppc4xx/Kconfig  |  4 ----
  board/avnet/fx12mm/Kconfig       | 12 ----------
  board/avnet/fx12mm/MAINTAINERS   |  7 ------
  board/avnet/fx12mm/Makefile      | 11 ---------
  board/avnet/fx12mm/fx12mm.c      | 34 ---------------------------
  board/avnet/fx12mm/xparameters.h | 35 ----------------------------
  configs/fx12mm_defconfig         | 10 --------
  configs/fx12mm_flash_defconfig   |  9 --------
  include/configs/fx12mm.h         | 50 ----------------------------------------
  9 files changed, 172 deletions(-)

delete mode 100644 board/avnet/fx12mm/Kconfig delete mode 100644 board/avnet/fx12mm/MAINTAINERS delete mode 100644 board/avnet/fx12mm/Makefile delete mode 100644 board/avnet/fx12mm/fx12mm.c delete mode 100644 board/avnet/fx12mm/xparameters.h delete mode 100644 configs/fx12mm_defconfig delete mode 100644 configs/fx12mm_flash_defconfig delete mode 100644 include/configs/fx12mm.h

It is just a specialized version of xilinx-ppc440

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 arch/powerpc/cpu/ppc4xx/Kconfig       |  4 ----
 board/avnet/v5fx30teval/Kconfig       | 12 -----------
 board/avnet/v5fx30teval/MAINTAINERS   |  7 -------
 board/avnet/v5fx30teval/Makefile      | 11 ----------
 board/avnet/v5fx30teval/v5fx30teval.c | 17 ----------------
 board/avnet/v5fx30teval/xparameters.h | 22 --------------------
 configs/v5fx30teval_defconfig         |  9 ---------
 configs/v5fx30teval_flash_defconfig   |  8 --------
 include/configs/v5fx30teval.h         | 38 -----------------------------------
 9 files changed, 128 deletions(-)

 delete mode 100644 board/avnet/v5fx30teval/Kconfig
 delete mode 100644 board/avnet/v5fx30teval/MAINTAINERS
 delete mode 100644 board/avnet/v5fx30teval/Makefile
 delete mode 100644 board/avnet/v5fx30teval/v5fx30teval.c
 delete mode 100644 board/avnet/v5fx30teval/xparameters.h
 delete mode 100644 configs/v5fx30teval_defconfig
 delete mode 100644 configs/v5fx30teval_flash_defconfig
 delete mode 100644 include/configs/v5fx30teval.h

It is just a specialized version of xilinx-ppc440

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

It is just a specialized version of xilinx-ppc440

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  arch/powerpc/cpu/ppc4xx/Kconfig       |  4 ----
  board/avnet/v5fx30teval/Kconfig       | 12 -----------
  board/avnet/v5fx30teval/MAINTAINERS   |  7 -------
  board/avnet/v5fx30teval/Makefile      | 11 ----------
  board/avnet/v5fx30teval/v5fx30teval.c | 17 ----------------
  board/avnet/v5fx30teval/xparameters.h | 22 --------------------
  configs/v5fx30teval_defconfig         |  9 ---------
  configs/v5fx30teval_flash_defconfig   |  8 --------
  include/configs/v5fx30teval.h         | 38 -----------------------------------
  9 files changed, 128 deletions(-)

delete mode 100644 board/avnet/v5fx30teval/Kconfig delete mode 100644 board/avnet/v5fx30teval/MAINTAINERS delete mode 100644 board/avnet/v5fx30teval/Makefile delete mode 100644 board/avnet/v5fx30teval/v5fx30teval.c delete mode 100644 board/avnet/v5fx30teval/xparameters.h delete mode 100644 configs/v5fx30teval_defconfig delete mode 100644 configs/v5fx30teval_flash_defconfig delete mode 100644 include/configs/v5fx30teval.h

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 .mailmap | 3 +++
 1 file changed, 3 insertions(+)

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

The old mail address will stop working soon.
Update it all the files

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 arch/powerpc/cpu/ppc4xx/interrupts.c                | 2 +-
 arch/powerpc/cpu/ppc4xx/uic.c                       | 2 +-
 arch/powerpc/cpu/ppc4xx/xilinx_irq.c                | 2 +-
 arch/powerpc/include/asm/interrupt.h                | 2 +-
 arch/powerpc/include/asm/xilinx_irq.h               | 2 +-
 board/xilinx/ppc405-generic/MAINTAINERS             | 2 +-
 board/xilinx/ppc405-generic/Makefile                | 2 +-
 board/xilinx/ppc405-generic/xilinx_ppc405_generic.c | 2 +-
 board/xilinx/ppc405-generic/xparameters.h           | 2 +-
 board/xilinx/ppc440-generic/MAINTAINERS             | 2 +-
 board/xilinx/ppc440-generic/Makefile                | 2 +-
 board/xilinx/ppc440-generic/init.S                  | 2 +-
 board/xilinx/ppc440-generic/xilinx_ppc440_generic.c | 2 +-

 board/xilinx/ppc440-generic/xparameters.h           | 2 +-
 drivers/hwmon/adt7460.c                             | 2 +-
 include/configs/xilinx-ppc.h                        | 2 +-
 include/configs/xilinx-ppc405-generic.h             | 2 +-
 include/configs/xilinx-ppc405.h                     | 2 +-
 include/configs/xilinx-ppc440-generic.h             | 2 +-
 include/configs/xilinx-ppc440.h                     | 2 +-
 20 files changed, 20 insertions(+), 20 deletions(-)

The old mail address will stop working soon.
Update it all the files

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

As a result of the specific board removal, the Makefiles can be simplified.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 board/xilinx/ppc405-generic/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

As a result of the specific board removal, the Makefiles can be simplified.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

As a result of the specific board removal, the Makefiles can be simplified.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  board/xilinx/ppc405-generic/Makefile | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

board/xilinx/ppc405-generic/Makefile +0 -0

index 922946d72341..2800f6862640 100644

As a result of the specific board removal, the Makefiles can be simplified.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 board/xilinx/ppc440-generic/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

As a result of the specific board removal, the Makefiles can be simplified.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

As a result of the specific board removal, the Makefiles can be simplified.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  board/xilinx/ppc440-generic/Makefile | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

board/xilinx/ppc440-generic/Makefile +0 -0

index 5ca57a9b0d54..4d5f41029ac6 100644

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 configs/xilinx-ppc440-generic_flash_defconfig | 8 --------
 1 file changed, 8 deletions(-)
 delete mode 100644 configs/xilinx-ppc440-generic_flash_defconfig

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  configs/xilinx-ppc440-generic_flash_defconfig | 8 --------
  1 file changed, 8 deletions(-)

delete mode 100644 configs/xilinx-ppc440-generic_flash_defconfig

configs/xilinx-ppc440-generic_flash_defconfig deleted +0 -0

deleted file mode 100644
index 629903344b77..000000000000

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  configs/xilinx-ppc440-generic_flash_defconfig | 8 --------
  1 file changed, 8 deletions(-)

delete mode 100644 configs/xilinx-ppc440-generic_flash_defconfig

configs/xilinx-ppc440-generic_flash_defconfig deleted +0 -0

deleted file mode 100644
index 629903344b77..000000000000

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 configs/xilinx-ppc405-generic_flash_defconfig | 8 --------
 1 file changed, 8 deletions(-)
 delete mode 100644 configs/xilinx-ppc405-generic_flash_defconfig

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Remove redundant defconfig file. Boot via flash can be configured via Kconfig.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
  configs/xilinx-ppc405-generic_flash_defconfig | 8 --------
  1 file changed, 8 deletions(-)

delete mode 100644 configs/xilinx-ppc405-generic_flash_defconfig

configs/xilinx-ppc405-generic_flash_defconfig deleted +0 -0

deleted file mode 100644
index 37084fb0a82d..000000000000

Now that there is only one header file for all ppc440 files, merge header files.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 include/configs/xilinx-ppc440-generic.h |  3 ++-
 include/configs/xilinx-ppc440.h         | 17 -----------------
 2 files changed, 2 insertions(+), 18 deletions(-)
 delete mode 100644 include/configs/xilinx-ppc440.h

Now that there is only one header file for all ppc440 files, merge header files.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that there is only one header file for all ppc440 files, merge header files.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that there is only one header file for all ppc405 files, merge header files.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 include/configs/xilinx-ppc405-generic.h |  5 ++++-
 include/configs/xilinx-ppc405.h         | 22 ----------------------
 2 files changed, 4 insertions(+), 23 deletions(-)
 delete mode 100644 include/configs/xilinx-ppc405.h

Now that there is only one header file for all ppc405 files, merge header files.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that there is only one header file for all ppc405 files, merge header files.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

(quoted diff) +0 -3

-Remove UART address (It is now part of the dts).
-Include dummy ns16550 clock
-Fix address to last test

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Add device tree example file for xilinx-ppc440-generic and xilinx-ppc405-generic

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 arch/powerpc/dts/Makefile                  |  2 ++
 arch/powerpc/dts/xilinx-ppc405-generic.dts | 13 +++++++++++++
 arch/powerpc/dts/xilinx-ppc440-generic.dts | 13 +++++++++++++
 3 files changed, 28 insertions(+)
 create mode 100644 arch/powerpc/dts/xilinx-ppc405-generic.dts
 create mode 100644 arch/powerpc/dts/xilinx-ppc440-generic.dts

arch/powerpc/dts/Makefile +2 -0

index 5d9f5c2822b2..80b4c0c4e374 100644
@@ -3,6 +3,8 @@
 #
 
 dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC440_GENERIC) += xilinx-ppc440-generic.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC405_GENERIC) += xilinx-ppc405-generic.dtb
 
 targets += $(dtb-y)
 

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +0 -0

new file mode 100644
index 000000000000..23c89335831e

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +6 -0

+       uart0: serial at 84000000 {
+               compatible = "xlnx,xps-uartlite-1.00.a";
+               interrupts = <0 0>;
+               reg = <0x84000000 0x10000>;
+       };
+} ;

arch/powerpc/dts/xilinx-ppc440-generic.dts new file +4 -0

new file mode 100644
index 000000000000..faae9fffcd0e
@@ -0,0 +1,13 @@
+/dts-v1/;
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;

Hi Ricardo,

Quoted 31 lines · Ricardo Ribalda Delgado

Add device tree example file for xilinx-ppc440-generic and xilinx-ppc405-generic

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 arch/powerpc/dts/Makefile                  |  2 ++
 arch/powerpc/dts/xilinx-ppc405-generic.dts | 13 +++++++++++++
 arch/powerpc/dts/xilinx-ppc440-generic.dts | 13 +++++++++++++
 3 files changed, 28 insertions(+)
 create mode 100644 arch/powerpc/dts/xilinx-ppc405-generic.dts
 create mode 100644 arch/powerpc/dts/xilinx-ppc440-generic.dts

arch/powerpc/dts/Makefile +2 -0

index 5d9f5c2822b2..80b4c0c4e374 100644
@@ -3,6 +3,8 @@
 #
 
 dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC440_GENERIC) += xilinx-ppc440-generic.dtb
+dtb-$(CONFIG_TARGET_XILINX_PPC405_GENERIC) += xilinx-ppc405-generic.dtb
 
 targets += $(dtb-y)
 

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +0 -0

new file mode 100644
index 000000000000..23c89335831e

arch/powerpc/dts/xilinx-ppc405-generic.dts line 1

Quoted 1 line

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +1 -0

@@ -0,0 +1,13 @@
+/dts-v1/;

nits: should have a blank line here

arch/powerpc/dts/xilinx-ppc405-generic.dts line 4

Quoted 3 lines

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +3 -0

+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;

nits: ditto

arch/powerpc/dts/xilinx-ppc405-generic.dts line 7

Quoted 3 lines

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +3 -0

+       aliases {
+               console = &uart0;
+       } ;

nits: ditto

Quoted 20 lines

arch/powerpc/dts/xilinx-ppc405-generic.dts new file +6 -0

+       uart0: serial at 84000000 {
+               compatible = "xlnx,xps-uartlite-1.00.a";
+               interrupts = <0 0>;
+               reg = <0x84000000 0x10000>;
+       };
+} ;

arch/powerpc/dts/xilinx-ppc440-generic.dts new file +8 -0

new file mode 100644
index 000000000000..faae9fffcd0e
@@ -0,0 +1,13 @@
+/dts-v1/;
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       aliases {
+               console = &uart0;
+       } ;
+       uart0: serial at 8b000000 {

arch/powerpc/dts/xilinx-ppc440-generic.dts

Quoted 6 lines

arch/powerpc/dts/xilinx-ppc440-generic.dts new file +5 -1

+               compatible = "xlnx,xps-uartlite-1.00.a";
+               interrupts = <0 0>;
+               reg = <0x8b000000 0x10000>;
+       };
+} ;
--

BTW no /chosen node?

Regards,
Bin

Add device tree example file for xilinx-ppc440-generic and xilinx-ppc405-generic

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

(quoted diff) +0 -2

-Fix typos (runnining -> running)
-Increase default size

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

(quoted diff) +0 -2

-Fix typos (runnining -> running)
-Increase default size

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

xilinx_uartlite has been ported to DM, this patch makes the xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new DM driver.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that the specific boards have been removed there is no need to maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 .../xilinx/ppc405-generic/xilinx_ppc405_generic.c  | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

Now that the specific boards have been removed there is no need to maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that the specific boards have been removed there is no need to maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that the specific boards have been removed there is no need to maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 board/xilinx/ppc440-generic/xilinx_ppc440_generic.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

Now that the specific boards have been removed there is no need to maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Now that the specific boards have been removed there is no need to maintain the weak functions.

Fix also CamelCase to make checkpatch happy

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 board/xilinx/ppc405-generic/xilinx_ppc405_generic.c | 5 -----
 1 file changed, 5 deletions(-)

board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 board/xilinx/ppc440-generic/xilinx_ppc440_generic.c | 5 -----
 1 file changed, 5 deletions(-)

board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

board_pre_init was not called because CONFIG_BOARD_EARLY_INIT_F was not set. Remove unused function.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

Size of this snprintf "lltemac.%lx" is bigger than 16 characters. Replacing it with "ll_tem.%lx"

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 drivers/net/xilinx_ll_temac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Size of this snprintf "lltemac.%lx" is bigger than 16 characters. Replacing it with "ll_tem.%lx"

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

If the xparameters file contains a LL_TEMAC definition compile its driver and the net commands.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  | 22 ++++++++++++++++++++++
 board/xilinx/ppc440-generic/xparameters.h          |  4 ++++
 configs/xilinx-ppc440-generic_defconfig            |  5 +++++
 include/configs/xilinx-ppc440-generic.h            | 10 ++++++++++
 4 files changed, 41 insertions(+)

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +9 -0

index 0e3ab94e31ef..d8233529304d 100644
@@ -8,6 +8,7 @@
 
 #include <config.h>
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 int checkboard(void)

@@ -34,3 +35,24 @@ void get_sys_info(sys_info_t *sys_info)
 int get_serial_clock(void){
        return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
 }
+
+int board_eth_init(bd_t *bis)
+{
+       int ret = 0;
+
+       puts("Init xilinx temac\n");
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +3 -0

+
+       return ret;
+}

board/xilinx/ppc440-generic/xparameters.h +4 -0

index 9685560673ab..b45a6a1d7668 100644
@@ -18,5 +18,9 @@
 #define XPAR_CORE_CLOCK_FREQ_HZ                400000000
 #define XPAR_INTC_MAX_NUM_INTR_INPUTS  32
 #define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
+#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80
+#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98
+#define XPAR_LLTEMAC_0_BASEADDR                0x83000000
+#define XPAR_LLTEMAC_1_BASEADDR                0x83000040
 
 #endif

configs/xilinx-ppc440-generic_defconfig +5 -0

index c66357e08724..64b55ee1359e 100644
@@ -11,3 +11,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic"
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_NETCONSOLE=y
+

include/configs/xilinx-ppc440-generic.h +0 -0

index 2af5f7fc1de5..8b9d37f42e03 100644

Hi Ricardo,

Quoted 39 lines · Ricardo Ribalda Delgado

If the xparameters file contains a LL_TEMAC definition compile its driver and the net commands.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  | 22 ++++++++++++++++++++++
 board/xilinx/ppc440-generic/xparameters.h          |  4 ++++
 configs/xilinx-ppc440-generic_defconfig            |  5 +++++
 include/configs/xilinx-ppc440-generic.h            | 10 ++++++++++
 4 files changed, 41 insertions(+)

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +13 -0

index 0e3ab94e31ef..d8233529304d 100644
@@ -8,6 +8,7 @@
 
 #include <config.h>
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 int checkboard(void)

@@ -34,3 +35,24 @@ void get_sys_info(sys_info_t *sys_info)
 int get_serial_clock(void){
        return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
 }
+
+int board_eth_init(bd_t *bis)
+{
+       int ret = 0;
+
+       puts("Init xilinx temac\n");
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,
+                       XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+                       XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR);
+
+#endif

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c void get_sys_info(sys_info_t *sys_info) · line 55

Quoted 6 lines

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +6 -0

+
+#ifdef XPAR_LLTEMAC_1_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR,
+                       XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+                       XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR);
+#endif

No DM ethernet driver for LLTEMAC?

Quoted 36 lines

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +3 -0

+
+       return ret;
+}

board/xilinx/ppc440-generic/xparameters.h +4 -0

index 9685560673ab..b45a6a1d7668 100644
@@ -18,5 +18,9 @@
 #define XPAR_CORE_CLOCK_FREQ_HZ                400000000
 #define XPAR_INTC_MAX_NUM_INTR_INPUTS  32
 #define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
+#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80
+#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98
+#define XPAR_LLTEMAC_0_BASEADDR                0x83000000
+#define XPAR_LLTEMAC_1_BASEADDR                0x83000040
 
 #endif

configs/xilinx-ppc440-generic_defconfig +5 -0

index c66357e08724..64b55ee1359e 100644
@@ -11,3 +11,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DEFAULT_DEVICE_TREE="xilinx-ppc440-generic"
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_NETCONSOLE=y
+

include/configs/xilinx-ppc440-generic.h +0 -0

index 2af5f7fc1de5..8b9d37f42e03 100644

include/configs/xilinx-ppc440-generic.h line 36

Quoted 4 lines

include/configs/xilinx-ppc440-generic.h +1 -0

@@ -33,6 +33,16 @@
 #define MTDIDS_DEFAULT                 "nor0=flash"
 #define MTDPARTS_DEFAULT               "mtdparts=flash:-(user)"
 
+/*Net*/

nits: /* Net */

include/configs/xilinx-ppc440-generic.h line 43

Quoted 7 lines

include/configs/xilinx-ppc440-generic.h +7 -0

+#ifdef XPAR_LLTEMAC_0_BASEADDR
+#define CONFIG_XILINX_LL_TEMAC
+#define CONFIG_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MARVELL
+#define CONFIG_NET_RANDOM_ETHADDR
+#define CONFIG_LIB_RAND

I believe we can move part of these into boards' defconfig files, and if with DM ethernet plus OF control we can always enable the driver.

include/configs/xilinx-ppc440-generic.h

Quoted 6 lines

include/configs/xilinx-ppc440-generic.h +2 -1

+#endif
+
 /*Generic Configs*/
 #include <configs/xilinx-ppc.h>
 
--

Regards,
Bin

Hello Bin

Quoted 43 lines · Bin Meng

Hi Ricardo,

Quoted 39 lines · Ricardo Ribalda Delgado

If the xparameters file contains a LL_TEMAC definition compile its driver and the net commands.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  | 22 ++++++++++++++++++++++
 board/xilinx/ppc440-generic/xparameters.h          |  4 ++++
 configs/xilinx-ppc440-generic_defconfig            |  5 +++++
 include/configs/xilinx-ppc440-generic.h            | 10 ++++++++++
 4 files changed, 41 insertions(+)

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +13 -0

index 0e3ab94e31ef..d8233529304d 100644
@@ -8,6 +8,7 @@
 
 #include <config.h>
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 int checkboard(void)

@@ -34,3 +35,24 @@ void get_sys_info(sys_info_t *sys_info)
 int get_serial_clock(void){
        return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
 }
+
+int board_eth_init(bd_t *bis)
+{
+       int ret = 0;
+
+       puts("Init xilinx temac\n");
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,
+                       XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+                       XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR);
+
+#endif

Quoted 8 lines

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c void get_sys_info(sys_info_t *sys_info) · line 55

Quoted 6 lines

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +6 -0

+
+#ifdef XPAR_LLTEMAC_1_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR,
+                       XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+                       XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR);
+#endif

No DM ethernet driver for LLTEMAC?

Not as far as I know

Quoted 56 lines · Ricardo Ribalda Delgado

Hello Bin

Quoted 43 lines · Bin Meng

Hi Ricardo,

Quoted 39 lines · Ricardo Ribalda Delgado

If the xparameters file contains a LL_TEMAC definition compile its driver and the net commands.

Signed-off-by Ricardo Ribalda Delgado <[email protected]>

---
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  | 22 ++++++++++++++++++++++
 board/xilinx/ppc440-generic/xparameters.h          |  4 ++++
 configs/xilinx-ppc440-generic_defconfig            |  5 +++++
 include/configs/xilinx-ppc440-generic.h            | 10 ++++++++++
 4 files changed, 41 insertions(+)

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +13 -0

index 0e3ab94e31ef..d8233529304d 100644
@@ -8,6 +8,7 @@
 
 #include <config.h>
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 int checkboard(void)

@@ -34,3 +35,24 @@ void get_sys_info(sys_info_t *sys_info)
 int get_serial_clock(void){
        return XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
 }
+
+int board_eth_init(bd_t *bis)
+{
+       int ret = 0;
+
+       puts("Init xilinx temac\n");
+#ifdef XPAR_LLTEMAC_0_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR,
+                       XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+                       XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR);
+
+#endif

Quoted 8 lines

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c void get_sys_info(sys_info_t *sys_info) · line 55

Quoted 6 lines

board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +6 -0

+
+#ifdef XPAR_LLTEMAC_1_BASEADDR
+       ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR,
+                       XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB,
+                       XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR);
+#endif

No DM ethernet driver for LLTEMAC?

Quoted 1 line

Not as far as I know

I have removed ll_temac support from Microblaze and as we discussed before we are not going to support ppc platforms. That's why if someone wants to use this driver it has to invest time to move it to DM or will be removed at some point in future.

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

hello

We are using the driver and can take a look if we can port it to DM. But it wont be in this or next week sorry.

xilinx-ppc4xx made us of serial uartlite, which was ported to DM. This patch moves port these boards to DM.

Now that Kconfig works really well, there is no need to maintain the specific boards (fx12mm, ml507 and v5fx30teval) or their flash version.

The ppc440 boards have been wired to the ll_temac driver.

A series of cleanouts have been done.

This patchset sits on top of:
http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/mb

It has been tested on a ppc440 bard.

Hopefully Georg Schardt can test the changes on his fx12mm.

These changes can also be browset at
https://github.com/ribalda/u-boot/tree/xilinx-ppc4xx-generic-dm

Regards (and thanks for your patience)!

Ricardo Ribalda (22):
ppc: xilinx-ppc440: Remove support for ml507
ppc: xilinx-ppc405: Remove support for fx12mm
xilinx-ppc440: Remove support for v5fx30teval .mailmap: Add all the mail alias for Ricardo Ribalda
mailaddr: Update mail address
ppc: pp405-generic: Simplify Makefile
ppc: pp440-generic: Simplify Makefile
ppc: ppc440: ppc440-generic_flash_defconfig
ppc: ppc405: ppc405-generic_flash_defconfig
ppc: xilinx-ppc440-generic: Cleanout header files
ppc: xilinx-ppc405-generic: Cleanout header files
ppc: xilinx-ppc4xx-generic: Update xparameters.h
ppc: dts: Add device tree for xilix-ppc4xx-generic configs/xilinx-ppc405-generic: Typos and size configs/xilinx-ppc440-generic: Typos and size
ppc: xilinx-ppc4xx: Port to DM serial
ppc: xilinx_ppc405_generic: Remove weak attributes
ppc: xilinx_ppc440_generic: Remove weak attributes
ppc: xilinx_ppc405_generic: Remove uncalled functions
ppc: xilinx_ppc440_generic: Remove uncalled functions
net: xilinx_ll_temac: Fix string overflow
ppc: xilinx-ppc440-generic: Wire LL_TEMAC driver

 .mailmap                                           |  3 ++
 arch/powerpc/cpu/ppc4xx/Kconfig                    | 20 ++++-----
 arch/powerpc/cpu/ppc4xx/interrupts.c               |  2 +-
 arch/powerpc/cpu/ppc4xx/uic.c                      |  2 +-
 arch/powerpc/cpu/ppc4xx/xilinx_irq.c               |  2 +-
 arch/powerpc/dts/Makefile                          |  2 +
 arch/powerpc/dts/xilinx-ppc405-generic.dts         | 13 ++++++
 arch/powerpc/dts/xilinx-ppc440-generic.dts         | 13 ++++++
 arch/powerpc/include/asm/interrupt.h               |  2 +-
 arch/powerpc/include/asm/xilinx_irq.h              |  2 +-
 board/avnet/fx12mm/Kconfig                         | 12 ------
 board/avnet/fx12mm/MAINTAINERS                     |  7 ---
 board/avnet/fx12mm/Makefile                        | 11 -----
 board/avnet/fx12mm/fx12mm.c                        | 34 ---------------
 board/avnet/fx12mm/xparameters.h                   | 35 ---------------
 board/avnet/v5fx30teval/Kconfig                    | 12 ------
 board/avnet/v5fx30teval/MAINTAINERS                |  7 ---
 board/avnet/v5fx30teval/Makefile                   | 11 -----
 board/avnet/v5fx30teval/v5fx30teval.c              | 17 --------
 board/avnet/v5fx30teval/xparameters.h              | 22 ----------
 board/xilinx/ml507/Kconfig                         | 12 ------
 board/xilinx/ml507/MAINTAINERS                     |  7 ---
 board/xilinx/ml507/Makefile                        | 11 -----
 board/xilinx/ml507/ml507.c                         | 17 --------
 board/xilinx/ml507/xparameters.h                   | 23 ----------
 board/xilinx/ppc405-generic/MAINTAINERS            |  2 +-
 board/xilinx/ppc405-generic/Makefile               |  4 +-
 .../xilinx/ppc405-generic/xilinx_ppc405_generic.c  | 31 ++++++--------
 board/xilinx/ppc405-generic/xparameters.h          |  7 ++-
 board/xilinx/ppc440-generic/MAINTAINERS            |  2 +-
 board/xilinx/ppc440-generic/Makefile               |  6 +--
 board/xilinx/ppc440-generic/init.S                 |  2 +-
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  | 49 ++++++++++++++-------
 board/xilinx/ppc440-generic/xparameters.h          | 15 ++++---
 configs/fx12mm_defconfig                           | 10 -----
 configs/fx12mm_flash_defconfig                     |  9 ----
 configs/ml507_defconfig                            |  9 ----
 configs/ml507_flash_defconfig                      |  8 ----
 configs/v5fx30teval_defconfig                      |  9 ----
 configs/v5fx30teval_flash_defconfig                |  8 ----
 configs/xilinx-ppc405-generic_defconfig            |  8 ++++
 configs/xilinx-ppc405-generic_flash_defconfig      |  8 ----
 configs/xilinx-ppc440-generic_defconfig            | 17 ++++++--
 configs/xilinx-ppc440-generic_flash_defconfig      |  8 ----
 drivers/hwmon/adt7460.c                            |  2 +-
 drivers/net/xilinx_ll_temac.c                      |  3 +-
 drivers/serial/Kconfig                             |  2 +-
 include/configs/fx12mm.h                           | 50 ----------------------
 include/configs/ml507.h                            | 38 ----------------
 include/configs/v5fx30teval.h                      | 38 ----------------
 include/configs/xilinx-ppc.h                       | 22 +++-------
 include/configs/xilinx-ppc405-generic.h            | 19 ++++----
 include/configs/xilinx-ppc405.h                    | 22 ----------
 include/configs/xilinx-ppc440-generic.h            | 27 ++++++++----
 include/configs/xilinx-ppc440.h                    | 17 --------
 55 files changed, 169 insertions(+), 582 deletions(-)
 create mode 100644 arch/powerpc/dts/xilinx-ppc405-generic.dts
 create mode 100644 arch/powerpc/dts/xilinx-ppc440-generic.dts
 delete mode 100644 board/avnet/fx12mm/Kconfig
 delete mode 100644 board/avnet/fx12mm/MAINTAINERS
 delete mode 100644 board/avnet/fx12mm/Makefile
 delete mode 100644 board/avnet/fx12mm/fx12mm.c
 delete mode 100644 board/avnet/fx12mm/xparameters.h
 delete mode 100644 board/avnet/v5fx30teval/Kconfig
 delete mode 100644 board/avnet/v5fx30teval/MAINTAINERS
 delete mode 100644 board/avnet/v5fx30teval/Makefile
 delete mode 100644 board/avnet/v5fx30teval/v5fx30teval.c
 delete mode 100644 board/avnet/v5fx30teval/xparameters.h
 delete mode 100644 board/xilinx/ml507/Kconfig
 delete mode 100644 board/xilinx/ml507/MAINTAINERS
 delete mode 100644 board/xilinx/ml507/Makefile
 delete mode 100644 board/xilinx/ml507/ml507.c
 delete mode 100644 board/xilinx/ml507/xparameters.h
 delete mode 100644 configs/fx12mm_defconfig
 delete mode 100644 configs/fx12mm_flash_defconfig
 delete mode 100644 configs/ml507_defconfig
 delete mode 100644 configs/ml507_flash_defconfig
 delete mode 100644 configs/v5fx30teval_defconfig

 delete mode 100644 configs/v5fx30teval_flash_defconfig
 delete mode 100644 configs/xilinx-ppc405-generic_flash_defconfig
 delete mode 100644 configs/xilinx-ppc440-generic_flash_defconfig
 delete mode 100644 include/configs/fx12mm.h
 delete mode 100644 include/configs/ml507.h
 delete mode 100644 include/configs/v5fx30teval.h
 delete mode 100644 include/configs/xilinx-ppc405.h
 delete mode 100644 include/configs/xilinx-ppc440.h

Quoted 128 lines · Ricardo Ribalda Delgado

xilinx-ppc4xx made us of serial uartlite, which was ported to DM. This patch moves port these boards to DM.

Now that Kconfig works really well, there is no need to maintain the specific boards (fx12mm, ml507 and v5fx30teval) or their flash version.

The ppc440 boards have been wired to the ll_temac driver.

A series of cleanouts have been done.

This patchset sits on top of:
http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/mb

It has been tested on a ppc440 bard.

Hopefully Georg Schardt can test the changes on his fx12mm.

These changes can also be browset at
https://github.com/ribalda/u-boot/tree/xilinx-ppc4xx-generic-dm

Regards (and thanks for your patience)!

Ricardo Ribalda (22):
ppc: xilinx-ppc440: Remove support for ml507
ppc: xilinx-ppc405: Remove support for fx12mm
xilinx-ppc440: Remove support for v5fx30teval .mailmap: Add all the mail alias for Ricardo Ribalda
mailaddr: Update mail address
ppc: pp405-generic: Simplify Makefile
ppc: pp440-generic: Simplify Makefile
ppc: ppc440: ppc440-generic_flash_defconfig
ppc: ppc405: ppc405-generic_flash_defconfig
ppc: xilinx-ppc440-generic: Cleanout header files
ppc: xilinx-ppc405-generic: Cleanout header files
ppc: xilinx-ppc4xx-generic: Update xparameters.h
ppc: dts: Add device tree for xilix-ppc4xx-generic configs/xilinx-ppc405-generic: Typos and size configs/xilinx-ppc440-generic: Typos and size
ppc: xilinx-ppc4xx: Port to DM serial
ppc: xilinx_ppc405_generic: Remove weak attributes
ppc: xilinx_ppc440_generic: Remove weak attributes
ppc: xilinx_ppc405_generic: Remove uncalled functions
ppc: xilinx_ppc440_generic: Remove uncalled functions
net: xilinx_ll_temac: Fix string overflow
ppc: xilinx-ppc440-generic: Wire LL_TEMAC driver

 .mailmap                                           |  3 ++
 arch/powerpc/cpu/ppc4xx/Kconfig                    | 20 ++++-----
 arch/powerpc/cpu/ppc4xx/interrupts.c               |  2 +-
 arch/powerpc/cpu/ppc4xx/uic.c                      |  2 +-
 arch/powerpc/cpu/ppc4xx/xilinx_irq.c               |  2 +-
 arch/powerpc/dts/Makefile                          |  2 +
 arch/powerpc/dts/xilinx-ppc405-generic.dts         | 13 ++++++
 arch/powerpc/dts/xilinx-ppc440-generic.dts         | 13 ++++++
 arch/powerpc/include/asm/interrupt.h               |  2 +-
 arch/powerpc/include/asm/xilinx_irq.h              |  2 +-
 board/avnet/fx12mm/Kconfig                         | 12 ------
 board/avnet/fx12mm/MAINTAINERS                     |  7 ---
 board/avnet/fx12mm/Makefile                        | 11 -----
 board/avnet/fx12mm/fx12mm.c                        | 34 ---------------
 board/avnet/fx12mm/xparameters.h                   | 35 ---------------
 board/avnet/v5fx30teval/Kconfig                    | 12 ------
 board/avnet/v5fx30teval/MAINTAINERS                |  7 ---
 board/avnet/v5fx30teval/Makefile                   | 11 -----
 board/avnet/v5fx30teval/v5fx30teval.c              | 17 --------
 board/avnet/v5fx30teval/xparameters.h              | 22 ----------
 board/xilinx/ml507/Kconfig                         | 12 ------
 board/xilinx/ml507/MAINTAINERS                     |  7 ---
 board/xilinx/ml507/Makefile                        | 11 -----
 board/xilinx/ml507/ml507.c                         | 17 --------
 board/xilinx/ml507/xparameters.h                   | 23 ----------
 board/xilinx/ppc405-generic/MAINTAINERS            |  2 +-
 board/xilinx/ppc405-generic/Makefile               |  4 +-
 .../xilinx/ppc405-generic/xilinx_ppc405_generic.c  | 31 ++++++--------
 board/xilinx/ppc405-generic/xparameters.h          |  7 ++-
 board/xilinx/ppc440-generic/MAINTAINERS            |  2 +-
 board/xilinx/ppc440-generic/Makefile               |  6 +--
 board/xilinx/ppc440-generic/init.S                 |  2 +-
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  | 49 ++++++++++++++-------
 board/xilinx/ppc440-generic/xparameters.h          | 15 ++++---
 configs/fx12mm_defconfig                           | 10 -----
 configs/fx12mm_flash_defconfig                     |  9 ----
 configs/ml507_defconfig                            |  9 ----
 configs/ml507_flash_defconfig                      |  8 ----
 configs/v5fx30teval_defconfig                      |  9 ----
 configs/v5fx30teval_flash_defconfig                |  8 ----
 configs/xilinx-ppc405-generic_defconfig            |  8 ++++
 configs/xilinx-ppc405-generic_flash_defconfig      |  8 ----
 configs/xilinx-ppc440-generic_defconfig            | 17 ++++++--
 configs/xilinx-ppc440-generic_flash_defconfig      |  8 ----
 drivers/hwmon/adt7460.c                            |  2 +-
 drivers/net/xilinx_ll_temac.c                      |  3 +-
 drivers/serial/Kconfig                             |  2 +-
 include/configs/fx12mm.h                           | 50 ----------------------
 include/configs/ml507.h                            | 38 ----------------
 include/configs/v5fx30teval.h                      | 38 ----------------
 include/configs/xilinx-ppc.h                       | 22 +++-------
 include/configs/xilinx-ppc405-generic.h            | 19 ++++----
 include/configs/xilinx-ppc405.h                    | 22 ----------
 include/configs/xilinx-ppc440-generic.h            | 27 ++++++++----
 include/configs/xilinx-ppc440.h                    | 17 --------
 55 files changed, 169 insertions(+), 582 deletions(-)
 create mode 100644 arch/powerpc/dts/xilinx-ppc405-generic.dts
 create mode 100644 arch/powerpc/dts/xilinx-ppc440-generic.dts
 delete mode 100644 board/avnet/fx12mm/Kconfig
 delete mode 100644 board/avnet/fx12mm/MAINTAINERS
 delete mode 100644 board/avnet/fx12mm/Makefile
 delete mode 100644 board/avnet/fx12mm/fx12mm.c
 delete mode 100644 board/avnet/fx12mm/xparameters.h
 delete mode 100644 board/avnet/v5fx30teval/Kconfig
 delete mode 100644 board/avnet/v5fx30teval/MAINTAINERS
 delete mode 100644 board/avnet/v5fx30teval/Makefile
 delete mode 100644 board/avnet/v5fx30teval/v5fx30teval.c
 delete mode 100644 board/avnet/v5fx30teval/xparameters.h
 delete mode 100644 board/xilinx/ml507/Kconfig
 delete mode 100644 board/xilinx/ml507/MAINTAINERS
 delete mode 100644 board/xilinx/ml507/Makefile
 delete mode 100644 board/xilinx/ml507/ml507.c
 delete mode 100644 board/xilinx/ml507/xparameters.h
 delete mode 100644 configs/fx12mm_defconfig
 delete mode 100644 configs/fx12mm_flash_defconfig
 delete mode 100644 configs/ml507_defconfig
 delete mode 100644 configs/ml507_flash_defconfig
 delete mode 100644 configs/v5fx30teval_defconfig

Quoted 9 lines

 delete mode 100644 configs/v5fx30teval_flash_defconfig
 delete mode 100644 configs/xilinx-ppc405-generic_flash_defconfig
 delete mode 100644 configs/xilinx-ppc440-generic_flash_defconfig
 delete mode 100644 include/configs/fx12mm.h
 delete mode 100644 include/configs/ml507.h
 delete mode 100644 include/configs/v5fx30teval.h
 delete mode 100644 include/configs/xilinx-ppc405.h
 delete mode 100644 include/configs/xilinx-ppc440.h

All looks good to me. For all

Reviewed-by Michal Simek <[email protected]>

I need patches up to 12 to be apply first.

What's the your way to mainline? Are you sending pull request to Tom or this is going via PPC tree?
Anyway I am happy to take this series as the part of my Xilinx pull request with Microblaze and zynq changes.

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

Hello Michal

Thanks for your fast review :).

Usually my patches were through Stefan Roese (sorry, I forgot to add you as cc in the patchset :( )
In this case, as it depends on yuour patches I do not know what should be the right path.

Tom, Stefan what do you propose?

Quoted 9 lines · Ricardo Ribalda Delgado

Hello Michal

Thanks for your fast review :).

Usually my patches were through Stefan Roese (sorry, I forgot to add you as cc in the patchset :( )
In this case, as it depends on yuour patches I do not know what should be the right path.

Quoted 1 line

Tom, Stefan what do you propose?

I would be quite happy for all of these to come in via Michal's tree. I'll try and review everything shortly as well. Thanks!

Quoted 10 lines · Tom Rini

Quoted 9 lines · Ricardo Ribalda Delgado

Hello Michal

Thanks for your fast review :).

Usually my patches were through Stefan Roese (sorry, I forgot to add you as cc in the patchset :( )
In this case, as it depends on yuour patches I do not know what should be the right path.

Quoted 4 lines

Quoted 1 line

Tom, Stefan what do you propose?

I would be quite happy for all of these to come in via Michal's tree. I'll try and review everything shortly as well. Thanks!

I'll try to review the patches later today. Or very early tomorrow. And, if Tom also sees no problems, then I also agree to push them via Michal's tree.