Skip to contentSkip to conversation

siemens,at91: enable features for smartweb

PATCH In review Samuel Egli 3 participants 3 messages Jan 27, 2016 – Feb 16, 2016

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 siemens,at91: enable features for smartweb

From: Matthias Michel <[email protected]>

New features for smartweb:
* switch to hush command parser
* change autoboot stop to <ESC><ESC>
* allow to write ethaddr

---
 configs/smartweb_defconfig |  5 ++++-
 include/configs/smartweb.h | 14 ++++++++++----
 2 files changed, 14 insertions(+), 5 deletions(-)
configs/smartweb_defconfig +4 -1
index ee4340f..654bb4b 100644
@@ -3,4 +3,7 @@ CONFIG_ARCH_AT91=y
 CONFIG_TARGET_SMARTWEB=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
-CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
+CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
include/configs/smartweb.h +10 -4
index 44d1d5a..de7b6bc 100644
@@ -49,10 +49,18 @@
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
 #define CONFIG_DISPLAY_CPUINFO		/* display CPU Info at startup */
 
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS    32
+
 /* setting board specific options */
-# define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_HUSH_PARSER    /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2  "> "
 #define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_AUTOLOAD "yes"
+#define CONFIG_RESET_TO_RETRY
 
 /* The LED PINs */
 #define CONFIG_RED_LED			AT91_PIN_PA9
@@ -184,9 +192,7 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_BOOTCOMMAND		"run flashboot"
-#define CONFIG_BOOT_RETRY_TIME          30
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE \
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
Signature · 1 line
2.1.4
#1 lore raw

PATCH 1/1 siemens,at91: enable features for smartweb

Hello Samuel,

Am 27.01.2016 um 15:56 schrieb Samuel Egli:

Quoted 7 lines

From: Matthias Michel <[email protected]>

New features for smartweb:
* switch to hush command parser
* change autoboot stop to <ESC><ESC>
* allow to write ethaddr

Quoted 8 lines
---
  configs/smartweb_defconfig |  5 ++++-
  include/configs/smartweb.h | 14 ++++++++++----
  2 files changed, 14 insertions(+), 5 deletions(-)

bye,
Heiko

Quoted 50 lines
configs/smartweb_defconfig +4 -1
index ee4340f..654bb4b 100644
@@ -3,4 +3,7 @@ CONFIG_ARCH_AT91=y
  CONFIG_TARGET_SMARTWEB=y
  CONFIG_SPL=y
  CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
-CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
+CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
include/configs/smartweb.h +10 -4
index 44d1d5a..de7b6bc 100644
@@ -49,10 +49,18 @@
  #define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
  #define CONFIG_DISPLAY_CPUINFO		/* display CPU Info at startup */
 
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS    32
+
  /* setting board specific options */
-# define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_HUSH_PARSER    /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2  "> "
  #define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_AUTOLOAD "yes"
+#define CONFIG_RESET_TO_RETRY
 
  /* The LED PINs */
  #define CONFIG_RED_LED			AT91_PIN_PA9
@@ -184,9 +192,7 @@
  /* General Boot Parameter */
  #define CONFIG_BOOTDELAY		3
  #define CONFIG_BOOTCOMMAND		"run flashboot"
-#define CONFIG_BOOT_RETRY_TIME          30
  #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_MAXARGS		16
  #define CONFIG_SYS_PBSIZE \
  	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  #define CONFIG_SYS_LONGHELP
Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Reviewed-by on v1 1/1
#2 lore raw
In reply to Samuel Egli
Quoted 7 lines · Samuel

From: Matthias Michel <[email protected]>

New features for smartweb:
* switch to hush command parser
* change autoboot stop to <ESC><ESC>
* allow to write ethaddr

Quoted 5 lines
Quoted 53 lines
---
 configs/smartweb_defconfig |  5 ++++-
 include/configs/smartweb.h | 14 ++++++++++----
 2 files changed, 14 insertions(+), 5 deletions(-)
configs/smartweb_defconfig +4 -1
index ee4340f..654bb4b 100644
@@ -3,4 +3,7 @@ CONFIG_ARCH_AT91=y
 CONFIG_TARGET_SMARTWEB=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
-CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
+CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
include/configs/smartweb.h +10 -4
index 44d1d5a..de7b6bc 100644
@@ -49,10 +49,18 @@
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
 #define CONFIG_DISPLAY_CPUINFO		/* display CPU Info at startup */
 
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS    32
+
 /* setting board specific options */
-# define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_HUSH_PARSER    /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2  "> "
 #define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_AUTOLOAD "yes"
+#define CONFIG_RESET_TO_RETRY
 
 /* The LED PINs */
 #define CONFIG_RED_LED			AT91_PIN_PA9
@@ -184,9 +192,7 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_BOOTCOMMAND		"run flashboot"
-#define CONFIG_BOOT_RETRY_TIME          30
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE \
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP