Intel Wired LAN Driver Updates 2016-01-25
Subsystems (3)
This series contains updates to i40e only and so I won't continue receiving patches to fix the same issue (again).
Arnd fixes the driver from causing the compiler whining about uninitialized variables, so initialize those variables.
Eric fixes the build errors/warnings which were introduced by Anjali when she added geneve support to i40e.
The following are changes since commit c85e4924452ae8225c8829f3fa8a2f7baa34bc5c:
hv_netvsc: Fix book keeping of skb during batching process
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue master
Arnd Bergmann (1):
net: i40e: shut up uninitialized variable warnings
Eric Dumazet (1):
i40e: fix build warnings
drivers/net/ethernet/intel/i40e/i40e_main.c | 15 +++++---------- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++-- 2 files changed, 7 insertions(+), 12 deletions(-)
Signature · 1 line
2.5.0
PATCH 1/2 i40e: fix build warnings
From: Eric Dumazet <[email protected]>
Fixes following build warnings :
drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning:
'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning:
'i40e_add_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning:
'i40e_del_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning:
'i40e_add_geneve_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning:
'i40e_del_geneve_port' defined but not used [-Wunused-function]
--- drivers/net/ethernet/intel/i40e/i40e_main.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +5 -10
@@ -7117,9 +7117,7 @@ static void i40e_service_task(struct work_struct *work)i40e_watchdog_subtask (pf);i40e_fdir_reinit_subtask (pf);i40e_sync_filters_subtask (pf); -#if IS_ENABLED (CONFIG_VXLAN ) ||IS_ENABLED (CONFIG_GENEVE )i40e_sync_udp_filters_subtask (pf); -#endif i40e_clean_adminq_subtask (pf);i40e_service_event_complete (pf);
@@ -8515,6 +8513,8 @@ static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port) }#endif + +#if IS_ENABLED (CONFIG_VXLAN )/** * i40e_add_vxlan_port - Get notifications about VXLAN ports that come up * @netdev: This physical port's netdev
@@ -8524,7 +8524,6 @@ static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port)static void i40e_add_vxlan_port (struct net_device *netdev,sa_family_t sa_family,__be16 port) { -#if IS_ENABLED (CONFIG_VXLAN )struct i40e_netdev_priv *np =netdev_priv (netdev);struct i40e_vsi *vsi = np->vsi;struct i40e_pf *pf = vsi->back;
@@ -8557,7 +8556,6 @@ static void i40e_add_vxlan_port(struct net_device *netdev, pf->udp_ports[next_idx].type =I40E_AQC_TUNNEL_TYPE_VXLAN ; pf->pending_udp_bitmap |=BIT_ULL (next_idx); pf->flags |=I40E_FLAG_UDP_FILTER_SYNC ; -#endif }/**
@@ -8569,7 +8567,6 @@ static void i40e_add_vxlan_port(struct net_device *netdev,static void i40e_del_vxlan_port (struct net_device *netdev,sa_family_t sa_family,__be16 port) { -#if IS_ENABLED (CONFIG_VXLAN )struct i40e_netdev_priv *np =netdev_priv (netdev);struct i40e_vsi *vsi = np->vsi;struct i40e_pf *pf = vsi->back;
@@ -8592,9 +8589,10 @@ static void i40e_del_vxlan_port(struct net_device *netdev,netdev_warn (netdev,"vxlan port %d was not found, not deleting\n" , ntohs(port)); } -#endif } +#endif +#if IS_ENABLED (CONFIG_GENEVE )/** * i40e_add_geneve_port - Get notifications about GENEVE ports that come up * @netdev: This physical port's netdev
@@ -8604,7 +8602,6 @@ static void i40e_del_vxlan_port(struct net_device *netdev,static void i40e_add_geneve_port (struct net_device *netdev,sa_family_t sa_family,__be16 port) { -#if IS_ENABLED (CONFIG_GENEVE )struct i40e_netdev_priv *np =netdev_priv (netdev);struct i40e_vsi *vsi = np->vsi;struct i40e_pf *pf = vsi->back;
@@ -8639,7 +8636,6 @@ static void i40e_add_geneve_port(struct net_device *netdev, pf->flags |=I40E_FLAG_UDP_FILTER_SYNC ;dev_info (&pf->pdev->dev,"adding geneve port %d\n" ,ntohs (port)); -#endif }/**
@@ -8651,7 +8647,6 @@ static void i40e_add_geneve_port(struct net_device *netdev,static void i40e_del_geneve_port (struct net_device *netdev,sa_family_t sa_family,__be16 port) { -#if IS_ENABLED (CONFIG_GENEVE )struct i40e_netdev_priv *np =netdev_priv (netdev);struct i40e_vsi *vsi = np->vsi;struct i40e_pf *pf = vsi->back;
@@ -8677,8 +8672,8 @@ static void i40e_del_geneve_port(struct net_device *netdev,netdev_warn (netdev,"geneve port %d was not found, not deleting\n" , ntohs(port)); } -#endif } +#endif static int i40e_get_phys_port_id (struct net_device *netdev,struct netdev_phys_item_id *ppid)
Signature · 1 line
2.5.0
PATCH 2/2 net: i40e: shut up uninitialized variable warnings
In reply to Jeff KirsherFrom: Arnd Bergmann <[email protected]>
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring':intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared hereintel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here
--- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_txrx.c +2 -2
@@ -2313,8 +2313,8 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,struct iphdr *this_ip_hdr;u32 network_hdr_len;u8 l4_hdr =0 ; -struct udphdr *oudph; -struct iphdr *oiph; +struct udphdr *oudph =NULL ; +struct iphdr *oiph =NULL ;u32 l4_tunnel =0 ;if (skb->encapsulation) {
Signature · 1 line
2.5.0
Re: [net,2/2] net: i40e: shut up uninitialized variable warnings
Quoted 7 lines · Jeff Kirsher
From: Arnd Bergmann <[email protected]>
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring':intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized]intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared hereintel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized]intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here
2364 if ((tx_ring->flags & I40E_TXR_FLAGS_OUTER_UDP_CSUM) &&
2365 (l4_tunnel == I40E_TXD_CTX_UDP_TUNNELING) &&
2366 (*cd_tunneling & I40E_TXD_CTX_QW0_EXT_IP_MASK)) {
2367 oudph->check = ~csum_tcpudp_magic(oiph->saddr,
2368 oiph->daddr, 2369 (skb->len - skb_transport_offset(skb)), 2370 IPPROTO_UDP, 0);
if compiler reports that oudph and oiph can be unitialized here, it's not enough just to set them to NULL.
Do we need probably to check that variables was initialized before access here? i.e. add oudph && oiph into condition?
Quoted 23 lines
Signed-off-by Arnd Bergmann <[email protected]>Tested-by Andrew Bowers <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-2@@ -2313,8 +2313,8 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,struct iphdr *this_ip_hdr;u32 network_hdr_len;u8 l4_hdr =0 ; -struct udphdr *oudph; -struct iphdr *oiph; +struct udphdr *oudph =NULL ; +struct iphdr *oiph =NULL ;u32 l4_tunnel =0 ;if (skb->encapsulation) {
PATCH 1/1 net: i40e: prevent access to uninitilized variables in i40e_tx_enable_csum()
Patch makes safe an access to 'oiph' and 'oudph' variables if they was not initilized.
--- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/i40e/i40e_txrx.c +2 -1
@@ -2363,7 +2363,8 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, }if ((tx_ring->flags &I40E_TXR_FLAGS_OUTER_UDP_CSUM ) && (l4_tunnel ==I40E_TXD_CTX_UDP_TUNNELING ) && - (*cd_tunneling &I40E_TXD_CTX_QW0_EXT_IP_MASK )) { + (*cd_tunneling &I40E_TXD_CTX_QW0_EXT_IP_MASK ) && + oudph && oiph) { oudph->check = ~csum_tcpudp_magic(oiph->saddr, oiph->daddr, (skb->len - skb_transport_offset(skb)),
Signature · 1 line
1.9.1
Re: [PATCH] net: i40e: prevent access to uninitilized variables in i40e_tx_enable_csum()
Quoted 13 lines · On Saturday 30 January 2016 19:47:36 Vasily Averin wrote:
Patch makes safe an access to 'oiph' and 'oudph' variables if they was not initilized.
Signed-off-by Vasily Averin <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/net/ethernet/intel/i40e/i40e_txrx.c +0
-0
drivers/net/ethernet/intel/i40e/i40e_txrx.c static void i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, · line 2370
Quoted 9 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c +2
-1@@ -2363,7 +2363,8 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, }if ((tx_ring->flags &I40E_TXR_FLAGS_OUTER_UDP_CSUM ) && (l4_tunnel ==I40E_TXD_CTX_UDP_TUNNELING ) && - (*cd_tunneling &I40E_TXD_CTX_QW0_EXT_IP_MASK )) { + (*cd_tunneling &I40E_TXD_CTX_QW0_EXT_IP_MASK ) && + oudph && oiph) { oudph->check = ~csum_tcpudp_magic(oiph->saddr, oiph->daddr, (skb->len - skb_transport_offset(skb)),
If we can actually get here with oudph==NULL or oiph==NULL, we should back my patch instead and fix it another way.
In the version we have in net-next, that is not possible.
Arnd
Re: [net,2/2] net: i40e: shut up uninitialized variable warnings
In reply to Vasily AverinQuoted 17 lines · On Saturday 30 January 2016 18:33:26 Vasily Averin wrote:
Quoted 7 lines · Jeff Kirsher
From: Arnd Bergmann <[email protected]>
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring':intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized]intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared hereintel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized]intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here2364 if ((
tx_ring->flags&I40E_TXR_FLAGS_OUTER_UDP_CSUM) &&
2365 (l4_tunnel==I40E_TXD_CTX_UDP_TUNNELING) &&
2366 (*cd_tunneling&I40E_TXD_CTX_QW0_EXT_IP_MASK)) {
2367oudph->check= ~csum_tcpudp_magic(oiph->saddr,2368 oiph->daddr, 2369 (skb->len - skb_transport_offset(skb)), 2370 IPPROTO_UDP, 0);
Quoted 5 lines
if compiler reports that oudph and oiph can be unitialized here, it's not enough just to set them to NULL.
Do we need probably to check that variables was initialized before access here? i.e. add oudph && oiph into condition?
Sorry, I should not have mentioned my patch when it wasn't meant as a serious submission. The patch I sent did not have a proper changelog on it so it failed to explain it.
The reason why my patch works correctly is that the check on "l4_tunnel == I40E_TXD_CTX_UDP_TUNNELING" means we can only get here if the two variables have been initialized, and gcc fails to see this.
Jeff mentioned that he already had a patch for this, so I did not follow up with a real patch.
Arnd
David Miller
maintainerFrom: Jeff Kirsher <[email protected]>
Date: Mon, 25 Jan 2016 15:58:50 -0800
Quoted 8 lines
This series contains updates to i40e only and so I won't continue receiving patches to fix the same issue (again).
Arnd fixes the driver from causing the compiler whining about uninitialized variables, so initialize those variables.
Eric fixes the build errors/warnings which were introduced by Anjali when she added geneve support to i40e.
Pulled, thanks Jeff.