spl: Support loading a FIT image containing U-Boot
Subsystems (14)
PATCH 10/26 Kconfig: Move CONFIG_FIT and CONFIG_OF_*_SETUP to Kconfig
In reply to Simon GlassMove these options to Kconfig and tidy up board configuration:
CONFIG_FIT
CONFIG_OF_BOARD_SETUP
CONFIG_OF_SYSTEM_SETUP
Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_GIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL.
Note: Masahiro's moveconfig.py script is amazing.
Signed-off-by Simon Glass <[email protected]>
---
cmd/disk.c | 6 ++--- common/Kconfig | 28 ++++++++++++++++++++++ common/Makefile | 2 +- common/bootm.c | 10 ++++---- common/image-fdt.c | 8 +++---- common/image-fit.c | 3 ++- common/image.c | 24 +++++++++---------- configs/10m50_defconfig | 1 + configs/3c120_defconfig | 1 + configs/A10-OLinuXino-Lime_defconfig | 1 + configs/A10s-OLinuXino-M_defconfig | 1 + configs/A13-OLinuXinoM_defconfig | 1 + configs/A13-OLinuXino_defconfig | 1 + configs/A20-OLinuXino-Lime2_defconfig | 1 + configs/A20-OLinuXino-Lime_defconfig | 1 + configs/A20-OLinuXino_MICRO_defconfig | 1 + configs/A20-Olimex-SOM-EVB_defconfig | 1 + configs/Ainol_AW1_defconfig | 1 + configs/Ampe_A76_defconfig | 1 + configs/Auxtek-T003_defconfig | 1 + configs/Auxtek-T004_defconfig | 1 + configs/B4420QDS_NAND_defconfig | 2 ++ configs/B4420QDS_SPIFLASH_defconfig | 2 ++ configs/B4420QDS_defconfig | 2 ++ configs/B4860QDS_NAND_defconfig | 2 ++ configs/B4860QDS_SECURE_BOOT_defconfig | 2 ++ configs/B4860QDS_SPIFLASH_defconfig | 2 ++ configs/B4860QDS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/B4860QDS_defconfig | 2 ++ configs/BSC9131RDB_NAND_SYSCLK100_defconfig | 2 ++ configs/BSC9131RDB_NAND_defconfig | 2 ++ configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig | 2 ++ configs/BSC9131RDB_SPIFLASH_defconfig | 2 ++ configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig | 2 ++ configs/BSC9132QDS_NAND_DDRCLK100_defconfig | 2 ++ configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig | 2 ++ configs/BSC9132QDS_NAND_DDRCLK133_defconfig | 2 ++ configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig | 2 ++ configs/BSC9132QDS_NOR_DDRCLK100_defconfig | 2 ++ configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig | 2 ++ configs/BSC9132QDS_NOR_DDRCLK133_defconfig | 2 ++ .../BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig | 2 ++ configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig | 2 ++ .../BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig | 2 ++ configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig | 2 ++ .../BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig | 2 ++ configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig | 2 ++ .../BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig | 2 ++ configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig | 2 ++ configs/Bananapi_defconfig | 1 + configs/Bananapro_defconfig | 1 + configs/C29XPCIE_NAND_defconfig | 2 ++ configs/C29XPCIE_NOR_SECBOOT_defconfig | 2 ++ configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 2 ++ configs/C29XPCIE_SPIFLASH_defconfig | 2 ++ configs/C29XPCIE_defconfig | 2 ++ configs/CHIP_defconfig | 1 + configs/CPCI4052_defconfig | 1 + configs/CSQ_CS908_defconfig | 1 + configs/Chuwi_V7_CW0825_defconfig | 1 + configs/Colombus_defconfig | 1 + configs/Cubieboard2_defconfig | 1 + configs/Cubieboard_defconfig | 1 + configs/Cubietruck_defconfig | 1 + configs/Cyrus_P5020_defconfig | 2 ++ configs/Cyrus_P5040_defconfig | 2 ++ configs/Empire_electronix_d709_defconfig | 1 + configs/Hummingbird_A31_defconfig | 1 + configs/Hyundai_A7HD_defconfig | 1 + configs/Lamobo_R1_defconfig | 1 + configs/Linksprite_pcDuino3_Nano_defconfig | 1 + configs/Linksprite_pcDuino3_defconfig | 1 + configs/Linksprite_pcDuino_defconfig | 1 + configs/MK808C_defconfig | 1 + configs/MPC8308RDB_defconfig | 2 ++ configs/MPC8313ERDB_33_defconfig | 1 + configs/MPC8313ERDB_66_defconfig | 1 + configs/MPC8313ERDB_NAND_33_defconfig | 1 + configs/MPC8313ERDB_NAND_66_defconfig | 1 + configs/MPC8315ERDB_defconfig | 1 + configs/MPC8323ERDB_defconfig | 1 + configs/MPC832XEMDS_ATM_defconfig | 1 + configs/MPC832XEMDS_HOST_33_defconfig | 1 + configs/MPC832XEMDS_HOST_66_defconfig | 1 + configs/MPC832XEMDS_SLAVE_defconfig | 1 + configs/MPC832XEMDS_defconfig | 1 + configs/MPC8349EMDS_defconfig | 1 + configs/MPC8349ITXGP_defconfig | 1 + configs/MPC8349ITX_LOWBOOT_defconfig | 1 + configs/MPC8349ITX_defconfig | 1 + configs/MPC837XEMDS_HOST_defconfig | 1 + configs/MPC837XEMDS_defconfig | 1 + configs/MPC837XERDB_defconfig | 1 + configs/MPC8536DS_36BIT_defconfig | 1 + configs/MPC8536DS_SDCARD_defconfig | 1 + configs/MPC8536DS_SPIFLASH_defconfig | 1 + configs/MPC8536DS_defconfig | 1 + configs/MPC8540ADS_defconfig | 1 + configs/MPC8541CDS_defconfig | 1 + configs/MPC8541CDS_legacy_defconfig | 1 + configs/MPC8544DS_defconfig | 1 + configs/MPC8548CDS_36BIT_defconfig | 1 + configs/MPC8548CDS_defconfig | 1 + configs/MPC8548CDS_legacy_defconfig | 1 + configs/MPC8555CDS_defconfig | 1 + configs/MPC8555CDS_legacy_defconfig | 1 + configs/MPC8560ADS_defconfig | 1 + configs/MPC8568MDS_defconfig | 1 + configs/MPC8569MDS_ATM_defconfig | 1 + configs/MPC8569MDS_defconfig | 1 + configs/MPC8572DS_36BIT_defconfig | 2 ++ configs/MPC8572DS_defconfig | 2 ++ configs/MPC8610HPCD_defconfig | 1 + configs/MPC8641HPCN_36BIT_defconfig | 1 + configs/MPC8641HPCN_defconfig | 1 + configs/MSI_Primo73_defconfig | 1 + configs/MSI_Primo81_defconfig | 1 + configs/Marsboard_A10_defconfig | 1 + configs/Mele_A1000G_quad_defconfig | 1 + configs/Mele_A1000_defconfig | 1 + configs/Mele_I7_defconfig | 1 + configs/Mele_M3_defconfig | 1 + configs/Mele_M5_defconfig | 1 + configs/Mele_M9_defconfig | 1 + configs/Mini-X_defconfig | 1 + configs/MiniFAP_defconfig | 1 + configs/O2D300_defconfig | 1 + configs/O2DNT2_RAMBOOT_defconfig | 1 + configs/O2DNT2_defconfig | 1 + configs/O2D_defconfig | 1 + configs/O2I_defconfig | 1 + configs/O2MNT_O2M110_defconfig | 1 + configs/O2MNT_O2M112_defconfig | 1 + configs/O2MNT_O2M113_defconfig | 1 + configs/O2MNT_defconfig | 1 + configs/O3DNT_defconfig | 1 + configs/Orangepi_defconfig | 1 + configs/Orangepi_mini_defconfig | 1 + configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 ++ configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 ++ configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 ++ .../P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 ++ configs/P1010RDB-PA_NAND_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PA_NAND_defconfig | 2 ++ configs/P1010RDB-PA_NOR_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PA_NOR_defconfig | 2 ++ configs/P1010RDB-PA_SDCARD_defconfig | 2 ++ configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PA_SPIFLASH_defconfig | 2 ++ configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 ++ configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 ++ configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 ++ .../P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 ++ configs/P1010RDB-PB_NAND_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PB_NAND_defconfig | 2 ++ configs/P1010RDB-PB_NOR_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PB_NOR_defconfig | 2 ++ configs/P1010RDB-PB_SDCARD_defconfig | 2 ++ configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig | 2 ++ configs/P1010RDB-PB_SPIFLASH_defconfig | 2 ++ configs/P1020MBG-PC_36BIT_SDCARD_defconfig | 2 ++ configs/P1020MBG-PC_36BIT_defconfig | 2 ++ configs/P1020MBG-PC_SDCARD_defconfig | 2 ++ configs/P1020MBG-PC_defconfig | 2 ++ configs/P1020RDB-PC_36BIT_NAND_defconfig | 2 ++ configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 2 ++ configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 2 ++ configs/P1020RDB-PC_36BIT_defconfig | 2 ++ configs/P1020RDB-PC_NAND_defconfig | 2 ++ configs/P1020RDB-PC_SDCARD_defconfig | 2 ++ configs/P1020RDB-PC_SPIFLASH_defconfig | 2 ++ configs/P1020RDB-PC_defconfig | 2 ++ configs/P1020RDB-PD_NAND_defconfig | 2 ++ configs/P1020RDB-PD_SDCARD_defconfig | 2 ++ configs/P1020RDB-PD_SPIFLASH_defconfig | 2 ++ configs/P1020RDB-PD_defconfig | 2 ++ configs/P1020UTM-PC_36BIT_SDCARD_defconfig | 2 ++ configs/P1020UTM-PC_36BIT_defconfig | 2 ++ configs/P1020UTM-PC_SDCARD_defconfig | 2 ++ configs/P1020UTM-PC_defconfig | 2 ++ configs/P1021RDB-PC_36BIT_NAND_defconfig | 2 ++ configs/P1021RDB-PC_36BIT_SDCARD_defconfig | 2 ++ configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig | 2 ++ configs/P1021RDB-PC_36BIT_defconfig | 2 ++ configs/P1021RDB-PC_NAND_defconfig | 2 ++ configs/P1021RDB-PC_SDCARD_defconfig | 2 ++ configs/P1021RDB-PC_SPIFLASH_defconfig | 2 ++ configs/P1021RDB-PC_defconfig | 2 ++ configs/P1022DS_36BIT_NAND_defconfig | 2 ++ configs/P1022DS_36BIT_SDCARD_defconfig | 2 ++ configs/P1022DS_36BIT_SPIFLASH_defconfig | 2 ++ configs/P1022DS_36BIT_defconfig | 2 ++ configs/P1022DS_NAND_defconfig | 2 ++ configs/P1022DS_SDCARD_defconfig | 2 ++ configs/P1022DS_SPIFLASH_defconfig | 2 ++ configs/P1022DS_defconfig | 2 ++ configs/P1023RDB_defconfig | 2 ++ configs/P1024RDB_36BIT_defconfig | 2 ++ configs/P1024RDB_NAND_defconfig | 2 ++ configs/P1024RDB_SDCARD_defconfig | 2 ++ configs/P1024RDB_SPIFLASH_defconfig | 2 ++ configs/P1024RDB_defconfig | 2 ++ configs/P1025RDB_36BIT_defconfig | 2 ++ configs/P1025RDB_NAND_defconfig | 2 ++ configs/P1025RDB_SDCARD_defconfig | 2 ++ configs/P1025RDB_SPIFLASH_defconfig | 2 ++ configs/P1025RDB_defconfig | 2 ++ configs/P2020RDB-PC_36BIT_NAND_defconfig | 2 ++ configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 2 ++ configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 2 ++ configs/P2020RDB-PC_36BIT_defconfig | 2 ++ configs/P2020RDB-PC_NAND_defconfig | 2 ++ configs/P2020RDB-PC_SDCARD_defconfig | 2 ++ configs/P2020RDB-PC_SPIFLASH_defconfig | 2 ++ configs/P2020RDB-PC_defconfig | 2 ++ configs/P2041RDB_NAND_defconfig | 2 ++ configs/P2041RDB_SDCARD_defconfig | 2 ++ configs/P2041RDB_SECURE_BOOT_defconfig | 2 ++ configs/P2041RDB_SPIFLASH_defconfig | 2 ++ configs/P2041RDB_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/P2041RDB_defconfig | 2 ++ configs/P3041DS_NAND_SECURE_BOOT_defconfig | 2 ++ configs/P3041DS_NAND_defconfig | 2 ++ configs/P3041DS_SDCARD_defconfig | 2 ++ configs/P3041DS_SECURE_BOOT_defconfig | 2 ++ configs/P3041DS_SPIFLASH_defconfig | 2 ++ configs/P3041DS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/P3041DS_defconfig | 2 ++ configs/P4080DS_SDCARD_defconfig | 2 ++ configs/P4080DS_SECURE_BOOT_defconfig | 2 ++ configs/P4080DS_SPIFLASH_defconfig | 2 ++ configs/P4080DS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/P4080DS_defconfig | 2 ++ configs/P5020DS_NAND_SECURE_BOOT_defconfig | 2 ++ configs/P5020DS_NAND_defconfig | 2 ++ configs/P5020DS_SDCARD_defconfig | 2 ++ configs/P5020DS_SECURE_BOOT_defconfig | 2 ++ configs/P5020DS_SPIFLASH_defconfig | 2 ++ configs/P5020DS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/P5020DS_defconfig | 2 ++ configs/P5040DS_NAND_SECURE_BOOT_defconfig | 2 ++ configs/P5040DS_NAND_defconfig | 2 ++ configs/P5040DS_SDCARD_defconfig | 2 ++ configs/P5040DS_SECURE_BOOT_defconfig | 2 ++ configs/P5040DS_SPIFLASH_defconfig | 2 ++ configs/P5040DS_defconfig | 2 ++ configs/PLU405_defconfig | 1 + configs/PMC405DE_defconfig | 1 + configs/PMC440_defconfig | 1 + configs/Sinlinx_SinA33_defconfig | 1 + configs/Sinovoip_BPI_M2_defconfig | 1 + configs/T1023RDB_NAND_defconfig | 2 ++ configs/T1023RDB_SDCARD_defconfig | 2 ++ configs/T1023RDB_SECURE_BOOT_defconfig | 2 ++ configs/T1023RDB_SPIFLASH_defconfig | 2 ++ configs/T1023RDB_defconfig | 2 ++ configs/T1024QDS_DDR4_SECURE_BOOT_defconfig | 2 ++ configs/T1024QDS_DDR4_defconfig | 2 ++ configs/T1024QDS_NAND_defconfig | 2 ++ configs/T1024QDS_SDCARD_defconfig | 2 ++ configs/T1024QDS_SECURE_BOOT_defconfig | 2 ++ configs/T1024QDS_SPIFLASH_defconfig | 2 ++ configs/T1024QDS_defconfig | 2 ++ configs/T1024RDB_NAND_defconfig | 2 ++ configs/T1024RDB_SDCARD_defconfig | 2 ++ configs/T1024RDB_SECURE_BOOT_defconfig | 2 ++ configs/T1024RDB_SPIFLASH_defconfig | 2 ++ configs/T1024RDB_defconfig | 2 ++ configs/T1040D4RDB_NAND_defconfig | 2 ++ configs/T1040D4RDB_SDCARD_defconfig | 2 ++ configs/T1040D4RDB_SECURE_BOOT_defconfig | 2 ++ configs/T1040D4RDB_SPIFLASH_defconfig | 2 ++ configs/T1040D4RDB_defconfig | 2 ++ configs/T1040QDS_DDR4_defconfig | 2 ++ configs/T1040QDS_SECURE_BOOT_defconfig | 2 ++ configs/T1040QDS_defconfig | 2 ++ configs/T1040RDB_NAND_defconfig | 2 ++ configs/T1040RDB_SDCARD_defconfig | 2 ++ configs/T1040RDB_SECURE_BOOT_defconfig | 2 ++ configs/T1040RDB_SPIFLASH_defconfig | 2 ++ configs/T1040RDB_defconfig | 2 ++ configs/T1042D4RDB_NAND_defconfig | 2 ++ configs/T1042D4RDB_SDCARD_defconfig | 2 ++ configs/T1042D4RDB_SECURE_BOOT_defconfig | 2 ++ configs/T1042D4RDB_SPIFLASH_defconfig | 2 ++ configs/T1042D4RDB_defconfig | 2 ++ configs/T1042RDB_PI_NAND_defconfig | 2 ++ configs/T1042RDB_PI_SDCARD_defconfig | 2 ++ configs/T1042RDB_PI_SPIFLASH_defconfig | 2 ++ configs/T1042RDB_PI_defconfig | 2 ++ configs/T1042RDB_SECURE_BOOT_defconfig | 2 ++ configs/T1042RDB_defconfig | 2 ++ configs/T2080QDS_NAND_defconfig | 2 ++ configs/T2080QDS_SDCARD_defconfig | 2 ++ configs/T2080QDS_SECURE_BOOT_defconfig | 2 ++ configs/T2080QDS_SPIFLASH_defconfig | 2 ++ configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/T2080QDS_defconfig | 2 ++ configs/T2080RDB_NAND_defconfig | 2 ++ configs/T2080RDB_SDCARD_defconfig | 2 ++ configs/T2080RDB_SECURE_BOOT_defconfig | 2 ++ configs/T2080RDB_SPIFLASH_defconfig | 2 ++ configs/T2080RDB_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/T2080RDB_defconfig | 2 ++ configs/T2081QDS_NAND_defconfig | 2 ++ configs/T2081QDS_SDCARD_defconfig | 2 ++ configs/T2081QDS_SPIFLASH_defconfig | 2 ++ configs/T2081QDS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/T2081QDS_defconfig | 2 ++ configs/T4160QDS_NAND_defconfig | 2 ++ configs/T4160QDS_SDCARD_defconfig | 2 ++ configs/T4160QDS_SECURE_BOOT_defconfig | 2 ++ configs/T4160QDS_defconfig | 2 ++ configs/T4160RDB_defconfig | 2 ++ configs/T4240QDS_NAND_defconfig | 2 ++ configs/T4240QDS_SDCARD_defconfig | 2 ++ configs/T4240QDS_SECURE_BOOT_defconfig | 2 ++ configs/T4240QDS_SRIO_PCIE_BOOT_defconfig | 2 ++ configs/T4240QDS_defconfig | 2 ++ configs/T4240RDB_SDCARD_defconfig | 2 ++ configs/T4240RDB_defconfig | 2 ++ configs/TQM5200S_HIGHBOOT_defconfig | 1 + configs/TQM5200S_defconfig | 1 + configs/TQM5200_B_HIGHBOOT_defconfig | 1 + configs/TQM5200_B_defconfig | 1 + configs/TQM5200_STK100_defconfig | 1 + configs/TQM5200_defconfig | 1 + configs/TQM823L_LCD_defconfig | 1 + configs/TQM823L_defconfig | 1 + configs/TQM823M_defconfig | 1 + configs/TQM834x_defconfig | 1 + configs/TQM850L_defconfig | 1 + configs/TQM850M_defconfig | 1 + configs/TQM855L_defconfig | 1 + configs/TQM855M_defconfig | 1 + configs/TQM860L_defconfig | 1 + configs/TQM860M_defconfig | 1 + configs/TQM862L_defconfig | 1 + configs/TQM862M_defconfig | 1 + configs/TQM866M_defconfig | 1 + configs/TQM885D_defconfig | 1 + configs/TTTech_defconfig | 1 + configs/TWR-P1025_defconfig | 2 ++ configs/UCP1020_SPIFLASH_defconfig | 2 ++ configs/UCP1020_defconfig | 2 ++ configs/UTOO_P66_defconfig | 1 + configs/VOM405_defconfig | 1 + configs/Wexler_TAB7200_defconfig | 1 + configs/Wits_Pro_A20_DKT_defconfig | 1 + configs/Wobo_i5_defconfig | 1 + configs/Yones_Toptech_BD1078_defconfig | 1 + configs/a3m071_defconfig | 2 ++ configs/a4m072_defconfig | 1 + configs/a4m2k_defconfig | 2 ++ configs/ac14xx_defconfig | 2 ++ configs/acadia_defconfig | 1 + configs/am335x_baltos_defconfig | 1 + configs/am335x_boneblack_defconfig | 1 + configs/am335x_evm_defconfig | 1 + configs/am335x_evm_nor_defconfig | 1 + configs/am335x_evm_norboot_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am335x_evm_usbspl_defconfig | 1 + configs/am335x_gp_evm_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/apalis_t30_defconfig | 1 + configs/arches_defconfig | 1 + configs/aria_defconfig | 1 + configs/aristainetos2_defconfig | 1 + configs/aristainetos2b_defconfig | 1 + configs/aristainetos_defconfig | 1 + configs/arndale_defconfig | 1 + configs/ba10_tv_box_defconfig | 1 + configs/bamboo_defconfig | 1 + configs/bayleybay_defconfig | 1 + configs/beaver_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/bubinga_defconfig | 1 + configs/caddy2_defconfig | 1 + configs/cam5200_defconfig | 1 + configs/cam5200_niosflash_defconfig | 1 + configs/canyonlands_defconfig | 1 + configs/cardhu_defconfig | 1 + configs/charon_defconfig | 1 + configs/chromebook_link_defconfig | 1 + configs/chromebox_panther_defconfig | 1 + configs/cm5200_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t54_defconfig | 1 + configs/colibri_t20_defconfig | 1 + configs/colibri_t30_defconfig | 1 + .../controlcenterd_36BIT_SDCARD_DEVELOP_defconfig | 2 ++ configs/controlcenterd_36BIT_SDCARD_defconfig | 2 ++ configs/coreboot-x86_defconfig | 1 + configs/crownbay_defconfig | 1 + configs/dalmore_defconfig | 1 + configs/devconcenter_defconfig | 2 ++ configs/digsy_mtc_RAMBOOT_defconfig | 1 + configs/digsy_mtc_defconfig | 1 + configs/digsy_mtc_rev5_RAMBOOT_defconfig | 1 + configs/digsy_mtc_rev5_defconfig | 1 + configs/dlvision-10g_defconfig | 2 ++ configs/dlvision_defconfig | 2 ++ configs/e2220-1170_defconfig | 1 + configs/eco5pk_defconfig | 1 + configs/efi-x86_defconfig | 1 + configs/flea3_defconfig | 1 + configs/fo300_defconfig | 1 + configs/ga10h_v1_1_defconfig | 1 + configs/galileo_defconfig | 1 + configs/gdppc440etx_defconfig | 1 + configs/glacier_defconfig | 1 + configs/glacier_ramboot_defconfig | 1 + configs/gt90h_v4_defconfig | 1 + configs/gwventana_defconfig | 2 ++ configs/h2200_defconfig | 1 + configs/haleakala_defconfig | 1 + configs/harmony_defconfig | 1 + configs/highbank_defconfig | 2 ++ configs/hrcon_defconfig | 2 ++ configs/hrcon_dh_defconfig | 2 ++ configs/i12-tvbox_defconfig | 1 + configs/iNet_3F_defconfig | 1 + configs/iNet_3W_defconfig | 1 + configs/iNet_86VS_defconfig | 1 + configs/icon_defconfig | 1 + configs/ids8313_defconfig | 1 + configs/inet1_defconfig | 1 + configs/inet97fv2_defconfig | 1 + configs/inet98v_rev2_defconfig | 1 + configs/inet9f_rev03_defconfig | 1 + configs/intip_defconfig | 2 ++ configs/io64_defconfig | 2 ++ configs/io_defconfig | 2 ++ configs/iocon_defconfig | 1 + configs/ipek01_defconfig | 1 + configs/jesurun_q5_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/katmai_defconfig | 1 + configs/kilauea_defconfig | 1 + configs/kmcoge4_defconfig | 2 ++ configs/kmcoge5ne_defconfig | 1 + configs/kmeter1_defconfig | 1 + configs/kmlion1_defconfig | 2 ++ configs/kmopti2_defconfig | 1 + configs/kmsupx5_defconfig | 1 + configs/kmtegr1_defconfig | 1 + configs/kmtepr2_defconfig | 1 + configs/kmvect1_defconfig | 1 + configs/ls1021aqds_ddr4_nor_defconfig | 1 + configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 1 + configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 + configs/ls1021aqds_nor_defconfig | 1 + configs/ls1021aqds_nor_lpuart_defconfig | 1 + configs/ls1021aqds_qspi_defconfig | 1 + configs/ls1021aqds_sdcard_defconfig | 1 + configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 + configs/ls1021atwr_nor_defconfig | 1 + configs/ls1021atwr_nor_lpuart_defconfig | 1 + configs/ls1021atwr_qspi_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_defconfig | 1 + configs/ls1021atwr_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_defconfig | 2 ++ configs/ls1043aqds_nand_defconfig | 2 ++ configs/ls1043aqds_nor_ddr3_defconfig | 2 ++ configs/ls1043aqds_sdcard_ifc_defconfig | 2 ++ configs/ls1043ardb_SECURE_BOOT_defconfig | 2 ++ configs/ls1043ardb_defconfig | 2 ++ configs/ls1043ardb_nand_defconfig | 2 ++ configs/ls1043ardb_sdcard_defconfig | 2 ++ configs/ls2080a_emu_defconfig | 2 ++ configs/ls2080a_simu_defconfig | 2 ++ configs/ls2080aqds_defconfig | 2 ++ configs/ls2080aqds_nand_defconfig | 2 ++ configs/ls2080ardb_defconfig | 2 ++ configs/ls2080ardb_nand_defconfig | 2 ++ configs/ls2085a_emu_defconfig | 2 ++ configs/ls2085a_simu_defconfig | 2 ++ configs/ls2085aqds_defconfig | 2 ++ configs/ls2085aqds_nand_defconfig | 2 ++ configs/ls2085ardb_defconfig | 2 ++ configs/ls2085ardb_nand_defconfig | 2 ++ configs/luan_defconfig | 1 + configs/lwmon5_defconfig | 2 ++ configs/m28evk_defconfig | 1 + configs/m53evk_defconfig | 1 + configs/makalu_defconfig | 1 + configs/mcx_defconfig | 1 + configs/mecp5123_defconfig | 1 + configs/medcom-wide_defconfig | 2 ++ configs/meesc_dataflash_defconfig | 1 + configs/meesc_defconfig | 1 + configs/mgcoge3ne_defconfig | 2 ++ configs/mgcoge_defconfig | 2 ++ configs/microblaze-generic_defconfig | 1 + configs/minnowmax_defconfig | 1 + configs/mixtile_loftq_defconfig | 1 + configs/mk802_a10s_defconfig | 1 + configs/mk802_defconfig | 1 + configs/mk802ii_defconfig | 1 + configs/motionpro_defconfig | 1 + configs/mpc5121ads_defconfig | 1 + configs/mpc5121ads_rev2_defconfig | 1 + configs/mpc8308_p1m_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/munices_defconfig | 1 + configs/neo_defconfig | 2 ++ configs/novena_defconfig | 1 + configs/nyan-big_defconfig | 2 ++ configs/odroid-xu3_defconfig | 1 + configs/odroid_defconfig | 1 + configs/p2371-0000_defconfig | 1 + configs/p2371-2180_defconfig | 1 + configs/p2571_defconfig | 1 + configs/paz00_defconfig | 1 + configs/pcm030_LOWBOOT_defconfig | 1 + configs/pcm030_defconfig | 1 + configs/pdm360ng_defconfig | 2 ++ configs/peach-pi_defconfig | 1 + configs/peach-pit_defconfig | 1 + configs/plutux_defconfig | 2 ++ configs/pov_protab2_ips9_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/q8_a13_tablet_defconfig | 1 + configs/q8_a23_tablet_800x480_defconfig | 1 + configs/q8_a33_tablet_1024x600_defconfig | 1 + configs/q8_a33_tablet_800x480_defconfig | 1 + configs/qemu-ppce500_defconfig | 2 ++ configs/qemu-x86_defconfig | 1 + configs/r7-tv-dongle_defconfig | 1 + configs/rainier_defconfig | 1 + configs/rainier_ramboot_defconfig | 1 + configs/redwood_defconfig | 1 + configs/rpi_2_defconfig | 1 + configs/rpi_defconfig | 1 + configs/rut_defconfig | 1 + configs/sbc8349_PCI_33_defconfig | 1 + configs/sbc8349_PCI_66_defconfig | 1 + configs/sbc8349_defconfig | 1 + configs/sbc8548_PCI_33_PCIE_defconfig | 1 + configs/sbc8548_PCI_33_defconfig | 1 + configs/sbc8548_PCI_66_PCIE_defconfig | 1 + configs/sbc8548_PCI_66_defconfig | 1 + configs/sbc8548_defconfig | 1 + configs/sbc8641d_defconfig | 1 + configs/seaboard_defconfig | 1 + configs/sequoia_defconfig | 1 + configs/sequoia_ramboot_defconfig | 1 + configs/smartweb_defconfig | 1 + configs/smdk5250_defconfig | 1 + configs/smdk5420_defconfig | 1 + configs/snapper9260_defconfig | 1 + configs/snapper9g20_defconfig | 1 + configs/snow_defconfig | 1 + configs/socfpga_arria5_defconfig | 1 + configs/socfpga_cyclone5_defconfig | 1 + configs/socfpga_de0_nano_soc_defconfig | 1 + configs/socfpga_mcvevk_defconfig | 1 + configs/socfpga_sockit_defconfig | 1 + configs/socfpga_socrates_defconfig | 1 + configs/socfpga_sr1500_defconfig | 1 + configs/socrates_defconfig | 2 ++ configs/spring_defconfig | 1 + configs/strider_con_defconfig | 2 ++ configs/strider_cpu_defconfig | 2 ++ configs/sunxi_Gemei_G9_defconfig | 1 + configs/suvd3_defconfig | 1 + configs/sycamore_defconfig | 1 + configs/t3corp_defconfig | 2 ++ configs/tbs2910_defconfig | 1 + configs/tec-ng_defconfig | 2 ++ configs/tec_defconfig | 2 ++ configs/tqma6q_mba6_mmc_defconfig | 2 ++ configs/tqma6q_mba6_spi_defconfig | 2 ++ configs/tqma6s_mba6_mmc_defconfig | 2 ++ configs/tqma6s_mba6_spi_defconfig | 2 ++ configs/tqma6s_wru4_mmc_defconfig | 2 ++ configs/trats2_defconfig | 1 + configs/trats_defconfig | 1 + configs/trimslice_defconfig | 1 + configs/tseries_mmc_defconfig | 1 + configs/tseries_nand_defconfig | 1 + configs/tseries_spi_defconfig | 1 + configs/tuge1_defconfig | 1 + configs/tuxx1_defconfig | 1 + configs/twister_defconfig | 1 + configs/ve8313_defconfig | 1 + configs/venice2_defconfig | 1 + configs/ventana_defconfig | 1 + configs/vme8349_defconfig | 1 + configs/walnut_defconfig | 1 + configs/whistler_defconfig | 1 + configs/wtk_defconfig | 1 + configs/xpedite1000_defconfig | 1 + configs/xpedite517x_defconfig | 2 ++ configs/xpedite520x_defconfig | 2 ++ configs/xpedite537x_defconfig | 2 ++ configs/xpedite550x_defconfig | 2 ++ configs/yellowstone_defconfig | 1 + configs/yosemite_defconfig | 1 + configs/yucca_defconfig | 1 + include/configs/10m50_devboard.h | 1 - include/configs/3c120_devboard.h | 1 - include/configs/B4860QDS.h | 2 -- include/configs/BSC9131RDB.h | 2 -- include/configs/BSC9132QDS.h | 2 -- include/configs/C29XPCIE.h | 2 -- include/configs/CPCI4052.h | 1 - include/configs/MPC8308RDB.h | 2 -- include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 2 -- include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/P1010RDB.h | 2 -- include/configs/P1022DS.h | 2 -- include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 2 -- include/configs/PLU405.h | 1 - include/configs/PMC405DE.h | 1 - include/configs/PMC440.h | 1 - include/configs/T102xQDS.h | 2 -- include/configs/T102xRDB.h | 2 -- include/configs/T1040QDS.h | 2 -- include/configs/T104xRDB.h | 2 -- include/configs/T208xQDS.h | 2 -- include/configs/T208xRDB.h | 2 -- include/configs/T4240RDB.h | 2 -- include/configs/TQM5200.h | 1 - include/configs/TQM823L.h | 1 - include/configs/TQM823M.h | 1 - include/configs/TQM834x.h | 1 - include/configs/TQM850L.h | 1 - include/configs/TQM850M.h | 1 - include/configs/TQM855L.h | 1 - include/configs/TQM855M.h | 1 - include/configs/TQM860L.h | 1 - include/configs/TQM860M.h | 1 - include/configs/TQM862L.h | 1 - include/configs/TQM862M.h | 1 - include/configs/TQM866M.h | 1 - include/configs/TQM885D.h | 1 - include/configs/UCP1020.h | 2 -- include/configs/VOM405.h | 1 - include/configs/a3m071.h | 2 -- include/configs/a4m072.h | 1 - include/configs/ac14xx.h | 2 -- include/configs/am335x_evm.h | 1 - include/configs/am335x_sl50.h | 1 - include/configs/amcc-common.h | 1 - include/configs/aria.h | 1 - include/configs/aristainetos-common.h | 1 - include/configs/baltos.h | 1 - include/configs/bav335x.h | 1 - include/configs/cm5200.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t54.h | 1 - include/configs/controlcenterd.h | 2 -- include/configs/corenet_ds.h | 2 -- include/configs/cyrus.h | 2 -- include/configs/digsy_mtc.h | 1 - include/configs/dlvision-10g.h | 1 - include/configs/dlvision.h | 1 - include/configs/exynos5-common.h | 1 - include/configs/flea3.h | 1 - include/configs/gw_ventana.h | 2 -- include/configs/h2200.h | 1 - include/configs/highbank.h | 2 -- include/configs/hrcon.h | 2 -- include/configs/ids8313.h | 1 - include/configs/intip.h | 1 - include/configs/io.h | 1 - include/configs/io64.h | 1 - include/configs/ipek01.h | 1 - include/configs/jupiter.h | 1 - include/configs/km/km-powerpc.h | 1 - include/configs/km/kmp204x-common.h | 2 -- include/configs/km82xx.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 2 -- include/configs/ls1043aqds.h | 1 - include/configs/ls2080a_common.h | 2 -- include/configs/lwmon5.h | 2 -- include/configs/m28evk.h | 1 - include/configs/m53evk.h | 1 - include/configs/manroland/common.h | 1 - include/configs/mcx.h | 1 - include/configs/mecp5123.h | 1 - include/configs/medcom-wide.h | 1 - include/configs/meesc.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/motionpro.h | 1 - include/configs/mpc5121ads.h | 1 - include/configs/mpc8308_p1m.h | 1 - include/configs/munices.h | 1 - include/configs/mx31ads.h | 1 - include/configs/neo.h | 1 - include/configs/novena.h | 1 - include/configs/nyan-big.h | 1 - include/configs/o2dnt-common.h | 1 - include/configs/odroid.h | 1 - include/configs/p1_p2_rdb_pc.h | 2 -- include/configs/p1_twr.h | 2 -- include/configs/pcm030.h | 1 - include/configs/pdm360ng.h | 2 -- include/configs/plutux.h | 1 - include/configs/pxm2.h | 1 - include/configs/qemu-ppce500.h | 2 -- include/configs/rpi-common.h | 1 - include/configs/rut.h | 1 - include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/smartweb.h | 1 - include/configs/snapper9260.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/socrates.h | 2 -- include/configs/strider.h | 2 -- include/configs/sunxi-common.h | 1 - include/configs/t3corp.h | 1 - include/configs/t4qds.h | 2 -- include/configs/tam3517-common.h | 1 - include/configs/tbs2910.h | 1 - include/configs/tec-ng.h | 1 - include/configs/tec.h | 1 - include/configs/tegra-common.h | 1 - include/configs/ti_armv7_keystone2.h | 1 - include/configs/tqma6.h | 2 -- include/configs/trats.h | 1 - include/configs/trats2.h | 1 - include/configs/tseries.h | 1 - include/configs/ve8313.h | 1 - include/configs/vme8349.h | 1 - include/configs/x86-common.h | 1 - include/configs/xpedite1000.h | 1 - include/configs/xpedite517x.h | 2 -- include/configs/xpedite520x.h | 2 -- include/configs/xpedite537x.h | 2 -- include/configs/xpedite550x.h | 2 -- include/image.h | 9 ++++--- 768 files changed, 953 insertions(+), 225 deletions(-)
cmd/disk.c +3 -3
@@ -22,7 +22,7 @@ int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,#endif block_dev_desc_t *dev_desc; -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT )const void *fit_hdr =NULL ;#endif
@@ -82,7 +82,7 @@ int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, cnt =image_get_image_size (hdr);break ;#endif -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT )case IMAGE_FORMAT_FIT : fit_hdr = (const void *) addr;puts ("Fit image detected...\n" );
@@ -108,7 +108,7 @@ int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, }bootstage_mark (BOOTSTAGE_ID_IDE_READ ); -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT )/* This cannot be done earlier, * we need complete FIT image in RAM first */ if (genimg_get_format ((void *) addr) ==IMAGE_FORMAT_FIT ) {
common/Kconfig +28 -0
@@ -124,3 +124,31 @@ config CONSOLE_RECORD_IN_SIZE tstc() and getc() will use this in preference to real device input. The buffer is allocated immediately after the malloc() region is ready. + +config FIT + bool "Enable support for Flat Image Trees" + depends on OF_LIBFDT + help + U-Boot uses a type of image called FIT (Flat Image Tree) to store + the Operating System, ramdisk and device tree files. This image is + very flexible, supporting compression, multiple images, multiple + configurations, verification through hashing and also verified + boot (secure boot using RSA). This option enables that feature. + +config OF_BOARD_SETUP + bool "Set up board-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_board_setup() before booting into + the Operating System. This function can set up various + board-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_SYSTEM_SETUP + bool "Set up system-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_system_setup() before booting into + the Operating System. This function can set up various + system-specific information in the device tree for use by the OS. + The device tree is then passed to the OS.
common/Makefile +1 -1
@@ -131,7 +131,7 @@ endif obj-y += image.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o obj-$(CONFIG_OF_LIBFDT) += image-fdt.o -obj-$(CONFIG_FIT) += image-fit.o +obj-$(CONFIG_$(SPL_)FIT) += image-fit.o obj-$(CONFIG_FIT_SIGNATURE) += image-sig.o obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o
common/bootm.c +5 -5
@@ -108,7 +108,7 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc, images.os.arch =image_get_arch (os_hdr);break ;#endif -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT case IMAGE_FORMAT_FIT : if (fit_image_get_type(images.fit_hdr_os, images.fit_noffset_os,
@@ -180,7 +180,7 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc,/* Kernel entry point is the setup.bin */ }else if (images.legacy_hdr_valid) { images.ep =image_get_ep (&images.legacy_hdr_os_copy); -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT } else if (images.fit_uname_os) {int ret;
@@ -245,7 +245,7 @@ int bootm_find_images(int flag, int argc, char * const argv[])set_working_fdt_addr ((ulong )images.ft_addr);#endif -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT /* find all of the loadables */ ret =boot_get_loadable (argc, argv, &images,IH_ARCH_DEFAULT ,NULL ,NULL );
@@ -788,7 +788,7 @@ static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,const void *buf;const char *fit_uname_config =NULL ;const char *fit_uname_kernel =NULL ; -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT int os_noffset;#endif
@@ -849,7 +849,7 @@ static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,bootstage_mark (BOOTSTAGE_ID_DECOMP_IMAGE );break ;#endif -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT case IMAGE_FORMAT_FIT : os_noffset = fit_image_load(images, img_addr, &fit_uname_kernel, &fit_uname_config,
common/image-fdt.c +4 -4
@@ -231,7 +231,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,ulong fdt_addr;char *fdt_blob =NULL ;void *buf; -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT )const char *fit_uname_config = images->fit_uname_cfg;const char *fit_uname_fdt =NULL ;ulong default_addr;
@@ -246,7 +246,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,if (argc >2 ) select = argv[2 ];if (select ||genimg_has_config (images)) { -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT )if (select) {/* * If the FDT blob comes from the FIT image and the
@@ -276,7 +276,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,debug ("* fdt: cmdline image address = 0x%08lx\n" , fdt_addr); } -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT ) } else {/* use FIT configuration provided in first bootm * command argument
@@ -351,7 +351,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,* (libfdt based) and raw FDT blob (also libfdt * based). */ -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT )/* check FDT blob vs FIT blob */ if (fit_check_format (buf)) {ulong load, len;
common/image-fit.c +2 -1
@@ -1091,8 +1091,9 @@ int fit_all_image_verify(const void *fit)* Direct child node of the images parent node, * i.e. component image node. */ -printf (" Hash(es) for Image %u (%s): " , count++, +printf (" Hash(es) for Image %u (%s): " , count,fit_get_name (fit, noffset,NULL )); + count++;if (!fit_image_verify (fit, noffset))return 0 ;
common/image.c +12 -12
@@ -29,7 +29,7 @@#include <image.h> #include <mapmem.h> -#if defined(CONFIG_FIT ) || defined(CONFIG_OF_LIBFDT ) +#if IMAGE_USE_FIT || defined(CONFIG_OF_LIBFDT )#include <libfdt.h> #include <fdt_support.h> #endif
@@ -702,7 +702,7 @@ ulong genimg_get_kernel_addr_fit(char * const img_addr, kernel_addr = load_addr;debug ("* kernel: default image load address = 0x%08lx\n" , load_addr); -#if defined(CONFIG_FIT ) +#if CONFIG_IS_ENABLED (FIT ) } else if (fit_parse_conf(img_addr, load_addr, &kernel_addr, fit_uname_config)) { debug("* kernel: config '%s' from image at 0x%08lx\n",
@@ -757,7 +757,7 @@ int genimg_get_format(const void *img_addr)if (image_check_magic (hdr))return IMAGE_FORMAT_LEGACY ;#endif -#if defined(CONFIG_FIT ) || defined(CONFIG_OF_LIBFDT ) +#if IMAGE_USE_FIT || defined(CONFIG_OF_LIBFDT )if (fdt_check_header (img_addr) ==0 )return IMAGE_FORMAT_FIT ;#endif
@@ -794,7 +794,7 @@ ulong genimg_get_image(ulong img_addr)/* get header size */ h_size =image_get_header_size (); -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT if (sizeof (struct fdt_header ) > h_size) h_size =sizeof (struct fdt_header );#endif
@@ -816,7 +816,7 @@ ulong genimg_get_image(ulong img_addr) ram_addr, d_size);break ;#endif -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT case IMAGE_FORMAT_FIT : d_size =fit_get_size (buf) - h_size; debug(" FIT/FDT format image found at 0x%08lx, "
@@ -857,7 +857,7 @@ ulong genimg_get_image(ulong img_addr)*/ int genimg_has_config (bootm_headers_t *images) { -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT if (images->fit_uname_cfg)return 1 ;#endif
@@ -898,7 +898,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,#ifdef CONFIG_SUPPORT_RAW_INITRD char *end;#endif -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT const char *fit_uname_config = images->fit_uname_cfg;const char *fit_uname_ramdisk =NULL ;ulong default_addr;
@@ -929,7 +929,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,debug ("## Skipping init Ramdisk\n" ); rd_len = rd_data =0 ; }else if (select ||genimg_has_config (images)) { -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT if (select) {/* * If the init ramdisk comes from the FIT image and
@@ -960,7 +960,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,"0x%08lx\n" , rd_addr); } -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT } else {/* use FIT configuration provided in first bootm * command argument. If the property is not defined,
@@ -1003,7 +1003,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, rd_load =image_get_load (rd_hdr);break ;#endif -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT case IMAGE_FORMAT_FIT : rd_noffset = fit_image_load(images, rd_addr, &fit_uname_ramdisk,
@@ -1179,14 +1179,14 @@ error:int boot_get_setup (bootm_headers_t *images,uint8_t arch,ulong *setup_start,ulong *setup_len) { -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT return boot_get_setup_fit (images, arch, setup_start, setup_len);#else return -ENOENT ;#endif } -#if defined(CONFIG_FIT ) +#if IMAGE_USE_FIT int boot_get_loadable (int argc,char *const argv[],bootm_headers_t *images,uint8_t arch,const ulong *ld_start,ulong *const ld_len) {
configs/10m50_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_DM_SERIAL=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard" CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTD is not set
configs/3c120_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_DM_SERIAL=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard" CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTD is not set
configs/A10-OLinuXino-Lime_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A10s-OLinuXino-M_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A13-OLinuXinoM_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A13-OLinuXino_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A20-OLinuXino-Lime2_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A20-OLinuXino-Lime_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A20-OLinuXino_MICRO_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/A20-Olimex-SOM-EVB_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Ainol_AW1_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Ampe_A76_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Auxtek-T003_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Auxtek-T004_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/B4420QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/B4420QDS_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/B4420QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/B4860QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/B4860QDS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/B4860QDS_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/B4860QDS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/B4860QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/BSC9131RDB_NAND_SYSCLK100_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/BSC9131RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH,SYS_CLK_100" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/BSC9131RDB_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NAND_DDRCLK100_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NAND_DDRCLK133_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NOR_DDRCLK100_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_NOR_DDRCLK133_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/Bananapi_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Bananapro_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/C29XPCIE_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y
configs/C29XPCIE_NOR_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y
configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y
configs/C29XPCIE_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y
configs/C29XPCIE_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y
configs/CHIP_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_USB0_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DCDC2_VOLT=1300
configs/CPCI4052_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CPCI4052=y +CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" "
configs/CSQ_CS908_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Chuwi_V7_CW0825_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Colombus_defconfig +1 -0
@@ -18,6 +18,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Cubieboard2_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Cubieboard_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Cubietruck_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Cyrus_P5020_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CYRUS=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5020" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_NETDEVICES=y
configs/Cyrus_P5040_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CYRUS=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5040" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_NETDEVICES=y
configs/Empire_electronix_d709_defconfig +1 -0
@@ -17,6 +17,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Hummingbird_A31_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Hyundai_A7HD_defconfig +1 -0
@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Lamobo_R1_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Linksprite_pcDuino3_Nano_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Linksprite_pcDuino3_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Linksprite_pcDuino_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/MK808C_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/MPC8308RDB_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8308RDB=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8313ERDB_33_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" +CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC8313ERDB_66_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" +CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC8313ERDB_NAND_33_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC8313ERDB_NAND_66_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC8315ERDB_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8315ERDB=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8323ERDB_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8323ERDB=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC832XEMDS_ATM_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC832XEMDS_HOST_33_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_33M,PQ_MDS_PIB=1" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC832XEMDS_HOST_66_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_66M,PQ_MDS_PIB=1" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC832XEMDS_SLAVE_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCISLAVE" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC832XEMDS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8349EMDS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349EMDS=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8349ITXGP_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_PROMPT="MPC8349E-mITX-GP> " # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC8349ITX_LOWBOOT_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX,SYS_TEXT_BASE=0xFE000000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_PROMPT="MPC8349E-mITX> " # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC8349ITX_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_PROMPT="MPC8349E-mITX> " # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y
configs/MPC837XEMDS_HOST_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC837XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC837XEMDS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC837XEMDS=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC837XERDB_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC837XERDB=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8536DS_36BIT_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/MPC8536DS_SDCARD_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/MPC8536DS_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/MPC8536DS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/MPC8540ADS_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8540ADS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8541CDS_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8541CDS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8541CDS_legacy_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8541CDS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8544DS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8544DS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8548CDS_36BIT_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8548CDS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8548CDS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8548CDS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8548CDS_legacy_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8548CDS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8555CDS_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8555CDS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8555CDS_legacy_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8555CDS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8560ADS_defconfig +1 -0
@@ -1,4 +1,5 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8560ADS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_OF_LIBFDT=y
configs/MPC8568MDS_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8568MDS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8569MDS_ATM_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8569MDS=y CONFIG_SYS_EXTRA_OPTIONS="ATM" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8569MDS_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8569MDS=y +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8572DS_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8572DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8572DS_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8572DS=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/MPC8610HPCD_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_MPC8610HPCD=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8641HPCN_36BIT_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_MPC8641HPCN=y CONFIG_SYS_EXTRA_OPTIONS="PHYS_64BIT" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MPC8641HPCN_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_MPC8641HPCN=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/MSI_Primo73_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/MSI_Primo81_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Marsboard_A10_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mele_A1000G_quad_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mele_A1000_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mele_I7_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mele_M3_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mele_M5_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mele_M9_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Mini-X_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/MiniFAP_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="MINIFAP" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2D300_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2D300=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2DNT2_RAMBOOT_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2DNT2=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000" +CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" CONFIG_AUTOBOOT_STOP_STR="++++++++++"
configs/O2DNT2_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2DNT2=y +CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" CONFIG_AUTOBOOT_STOP_STR="++++++++++"
configs/O2D_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2D=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2I_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2I=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2MNT_O2M110_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M110\"" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2MNT_O2M112_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M112\"" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2MNT_O2M113_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M113\"" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O2MNT_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/O3DNT_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O3DNT=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/Orangepi_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Orangepi_mini_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_36BIT_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_36BIT_NOR_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SPIFLASH,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_NAND_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND_SECBOOT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_NOR_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_NOR_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SPIFLASH,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PA_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,NAND_SECBOOT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_NOR_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SPIFLASH,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_NAND_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND_SECBOOT,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_NOR_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_NOR_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SPIFLASH,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1010RDB-PB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020MBG-PC_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG,SDCARD,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020MBG-PC_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020MBG-PC_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020MBG-PC_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020RDB-PC_36BIT_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PC_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PD_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PD_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PD_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020RDB-PD_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1020UTM-PC_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020UTM-PC_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020UTM-PC_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1020UTM-PC_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM" +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1021RDB-PC_36BIT_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1021RDB-PC_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_36BIT_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_36BIT_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1022DS_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1023RDB_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1023RDB=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y
configs/P1024RDB_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1024RDB_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1024RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1024RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1024RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1025RDB_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1025RDB_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1025RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1025RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P1025RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_36BIT_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_36BIT_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_36BIT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_NAND_defconfig +2 -0
@@ -3,7 +3,9 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2020RDB-PC_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2041RDB_NAND_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2041RDB_SDCARD_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2041RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2041RDB_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P2041RDB_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/P2041RDB_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P3041DS_NAND_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P3041DS_NAND_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P3041DS_SDCARD_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P3041DS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P3041DS_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P3041DS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/P3041DS_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P4080DS_SDCARD_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P4080DS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P4080DS_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P4080DS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/P4080DS_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5020DS_NAND_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5020DS_NAND_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5020DS_SDCARD_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5020DS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5020DS_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5020DS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/P5020DS_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5040DS_NAND_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5040DS_NAND_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5040DS_SDCARD_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5040DS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5040DS_SPIFLASH_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/P5040DS_defconfig +2 -0
@@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y +CONFIG_FIT=y +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/PLU405_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_PLU405=y +CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" "
configs/PMC405DE_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_PMC405DE=y +CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" "
configs/PMC440_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_PMC440=y +CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" "
configs/Sinlinx_SinA33_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/Sinovoip_BPI_M2_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/T1023RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T1023RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T1023RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/T1023RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T1023RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_NETDEVICES=y
configs/T1024QDS_DDR4_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SYS_FSL_DDR4,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024QDS_DDR4_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024QDS_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024QDS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024QDS_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1024RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1024RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1024RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1024RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1024RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040D4RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040D4RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040D4RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040D4RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040D4RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040QDS_DDR4_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T1040QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1040QDS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T1040QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1040QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T1040QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T1040RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT,T1040RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1040RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042D4RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042D4RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042D4RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042D4RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042D4RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,T104XD4RDB,SYS_FSL_DDR4" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042RDB_PI_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042RDB_PI_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042RDB_PI_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042RDB_PI_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,SECURE_BOOT,T1042RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T1042RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T2080QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2080QDS_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2080QDS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2080QDS_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T2080QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2080RDB_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T2080RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T2080RDB_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T2080RDB_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T2080RDB_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T2080RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y
configs/T2081QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2081QDS_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2081QDS_SPIFLASH_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T2081QDS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T2081QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y
configs/T4160QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4160QDS_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4160QDS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4160QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4160RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4240QDS_NAND_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4240QDS_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4240QDS_SECURE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,SECURE_BOOT" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4240QDS_SRIO_PCIE_BOOT_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y
configs/T4240QDS_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4240RDB_SDCARD_defconfig +2 -0
@@ -2,7 +2,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y CONFIG_SPL=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/T4240RDB_defconfig +2 -0
@@ -1,7 +1,9 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" +CONFIG_OF_BOARD_SETUP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_NETDEVICES=y
configs/TQM5200S_HIGHBOOT_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM5200S_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,TQM5200S" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM5200_B_HIGHBOOT_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,SYS_TEXT_BASE=0xFFF00000" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM5200_B_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM5200_STK100_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="STK52XX_REV100" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM5200_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM823L_LCD_defconfig +1 -0
@@ -2,5 +2,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823L=y CONFIG_SYS_EXTRA_OPTIONS="LCD,NEC_NL6448BC20" +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM823L_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823L=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM823M_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823M=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM834x_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_TQM834X=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y
configs/TQM850L_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM850L=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM850M_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM850M=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM855L_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM855L=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM855M_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM855M=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM860L_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM860L=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM860M_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM860M=y +CONFIG_OF_BOARD_SETUP=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_LIBFDT=y
configs/TQM862L_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM862L=y +CONFIG_OF_BOARD_SETUP=y
Lines of this file are not shown. View the raw message.
configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +2 -0
Lines of this file are not shown. View the raw message.
configs/controlcenterd_36BIT_SDCARD_defconfig +2 -0
Lines of this file are not shown. View the raw message.
configs/digsy_mtc_rev5_RAMBOOT_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021aqds_ddr4_nor_lpuart_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021aqds_nor_SECURE_BOOT_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021aqds_nor_lpuart_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021atwr_nor_SECURE_BOOT_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021atwr_nor_lpuart_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021atwr_sdcard_ifc_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1021atwr_sdcard_qspi_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/ls1043aqds_sdcard_ifc_defconfig +2 -0
Lines of this file are not shown. View the raw message.
configs/ls1043ardb_SECURE_BOOT_defconfig +2 -0
Lines of this file are not shown. View the raw message.
configs/q8_a23_tablet_800x480_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/q8_a33_tablet_1024x600_defconfig +1 -0
Lines of this file are not shown. View the raw message.
configs/q8_a33_tablet_800x480_defconfig +1 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.0.rc3.207.g0ac5344
Part of the diff is not shown here. View the raw message.
PATCH 10/26 Kconfig: Move CONFIG_FIT and CONFIG_OF_*_SETUP to Kconfig
Hello Simon,
Am 28.01.2016 um 17:39 schrieb Simon Glass:
Quoted 9 lines
Move these options to
Kconfigand tidy up board configuration:
CONFIG_FIT
CONFIG_OF_BOARD_SETUP
CONFIG_OF_SYSTEM_SETUPUnfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining
CONFIG_GITin the
CONFIG_FIT ?
Quoted 8 lines
image.hfile. To solve this, add a newIMAGE_USE_FIT#define which can be used in files that are built on the host but must also build for U-Boot and SPL.Note: Masahiro's
moveconfig.pyscript is amazing.Signed-off-by Simon Glass <[email protected]>---
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 11/26 fdt: Adjust DEFAULT_DEVICE_TREE to device on OF_CONTROL
In reply to Simon GlassThis option has no meaning without OF_CONTROL, so add a dependency.
Signed-off-by Simon Glass <[email protected]>
---
dts/Kconfig | 1 + 1 file changed, 1 insertion(+)
dts/Kconfig +1 -0
@@ -53,6 +53,7 @@ endchoice config DEFAULT_DEVICE_TREE string "Default Device Tree for DT control" + depends on OF_CONTROL help This option specifies the default Device Tree used for DT control. It can be overridden from the command line:
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 12/26 fdt: Allow libfdt to be used in SPL
In reply to Simon GlassAdd an option to enable libfdt in SPL. This can be useful when decoding FIT files in SPL.
We need to make sure this option is not enabled in SPL by this change. Also this option needs to be enabled in host builds. Si add a new IMAGE_USE_LIBFDT #define which can be used in files that are built on the host but must also build for U-Boot and SPL.
Signed-off-by Simon Glass <[email protected]>
---
common/Makefile | 4 ++-- common/bootm.c | 4 ++-- common/image.c | 4 ++-- include/common.h | 4 ++-- include/image.h | 8 ++------ lib/Kconfig | 10 ++++++++++ lib/Makefile | 4 +--- 7 files changed, 21 insertions(+), 17 deletions(-)
common/Makefile +2 -2
@@ -55,7 +55,7 @@ obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o obj-$(CONFIG_CMD_BEDBUG) += bedbug.o -obj-$(CONFIG_OF_LIBFDT) += fdt_support.o +obj-$(CONFIG_$(SPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_MII) += miiphyutil.o obj-$(CONFIG_CMD_MII) += miiphyutil.o
@@ -130,7 +130,7 @@ obj-y += malloc_simple.o endif obj-y += image.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o -obj-$(CONFIG_OF_LIBFDT) += image-fdt.o +obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o obj-$(CONFIG_$(SPL_)FIT) += image-fit.o obj-$(CONFIG_FIT_SIGNATURE) += image-sig.o obj-$(CONFIG_IO_TRACE) += iotrace.o
common/bootm.c +2 -2
@@ -234,7 +234,7 @@ int bootm_find_images(int flag, int argc, char * const argv[])return 1 ; } -#if defined(CONFIG_OF_LIBFDT ) +#if IMAGE_ENABLE_OF_LIBFDT /* find flattened device tree */ ret =boot_get_fdt (flag, argc, argv,IH_ARCH_DEFAULT , &images, &images.ft_addr, &images.ft_len);
@@ -644,7 +644,7 @@ int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], } }#endif -#if defined(CONFIG_OF_LIBFDT ) && defined(CONFIG_LMB ) +#if IMAGE_ENABLE_OF_LIBFDT && defined(CONFIG_LMB )if (!ret && (states &BOOTM_STATE_FDT )) {boot_fdt_add_mem_rsv_regions (&images->lmb, images->ft_addr); ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
common/image.c +2 -2
@@ -29,7 +29,7 @@#include <image.h> #include <mapmem.h> -#if IMAGE_USE_FIT || defined(CONFIG_OF_LIBFDT ) +#if IMAGE_USE_FIT ||IMAGE_ENABLE_OF_LIBFDT #include <libfdt.h> #include <fdt_support.h> #endif
@@ -757,7 +757,7 @@ int genimg_get_format(const void *img_addr)if (image_check_magic (hdr))return IMAGE_FORMAT_LEGACY ;#endif -#if IMAGE_USE_FIT || defined(CONFIG_OF_LIBFDT ) +#if IMAGE_USE_FIT ||IMAGE_ENABLE_OF_LIBFDT if (fdt_check_header (img_addr) ==0 )return IMAGE_FORMAT_FIT ;#endif
include/common.h +2 -2
@@ -596,7 +596,7 @@ void upmconfig (unsigned int, unsigned int *, unsigned int);ulong get_tbclk (void );void reset_misc (void );void reset_cpu (ulong addr); -#if defined (CONFIG_OF_LIBFDT ) && defined (CONFIG_OF_BOARD_SETUP ) +#if IMAGE_ENABLE_OF_LIBFDT && defined(CONFIG_OF_BOARD_SETUP )void ft_cpu_setup (void *blob,bd_t *bd);#ifdef CONFIG_PCI void ft_pci_setup (void *blob,bd_t *bd);
@@ -660,7 +660,7 @@ int get_serial_clock(void);#if defined(CONFIG_MPC85xx)typedef MPC85xx_SYS_INFO sys_info_t ;void get_sys_info (sys_info_t * ); -# if defined(CONFIG_OF_LIBFDT ) +# if IMAGE_ENABLE_OF_LIBFDT void ft_fixup_cpu (void *,u64 );void ft_fixup_num_cores (void *);# endif
include/image.h +2 -6
@@ -28,6 +28,7 @@ struct lmb;/* new uImage format support enabled on host */ #define CONFIG_FIT 1#define IMAGE_USE_FIT 1 +#define IMAGE_ENABLE_OF_LIBFDT 1#define CONFIG_FIT_VERBOSE 1/* enable fit_format_{error,warning}() */ #define IMAGE_ENABLE_IGNORE 0
@@ -44,6 +45,7 @@ struct lmb;#define IMAGE_INDENT_STRING " "#define IMAGE_USE_FIT CONFIG_IS_ENABLED(FIT) +#define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT)#endif /* USE_HOSTCC */
@@ -104,12 +106,6 @@ struct lmb;# define IMAGE_ENABLE_RAMDISK_HIGH 0#endif -#ifdef CONFIG_OF_LIBFDT -# define IMAGE_ENABLE_OF_LIBFDT 1 -#else -# define IMAGE_ENABLE_OF_LIBFDT 0 -#endif -#ifdef CONFIG_SYS_BOOT_GET_CMDLINE # define IMAGE_BOOT_GET_CMDLINE 1#else
lib/Kconfig +10 -0
@@ -138,6 +138,16 @@ config OF_LIBFDT particular compatible nodes. The library operates on a flattened version of the device tree. +config SPL_OF_LIBFDT + bool "Enable the FDT library for SPL" + default y if SPL_OF_CONTROL + help + This enables the FDT library (libfdt). It provides functions for + accessing binary device tree images in memory, such as adding and + removing notes and properties, scanning through the tree and finding + particular compatible nodes. The library operates on a flattened + version of the device tree. + source lib/efi/Kconfig endmenu
lib/Makefile +1 -3
@@ -50,9 +50,7 @@ obj-$(CONFIG_BITREVERSE) += bitrev.o obj-y += list_sort.o endif -ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_OF_LIBFDT) += libfdt/ -endif +obj-$(CONFIG_$(SPL)OF_LIBFDT) += libfdt/ ifdef CONFIG_SPL_OF_CONTROL obj-$(CONFIG_OF_LIBFDT) += libfdt/ endif
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 13/26 sunxi: Display the board model on start-up
In reply to Simon GlassIt is useful to know which sunxi board you are booting. Display this on start-up to avoid confusion.
Signed-off-by Simon Glass <[email protected]>
---
include/configs/sunxi-common.h | 1 + 1 file changed, 1 insertion(+)
include/configs/sunxi-common.h +1 -0
@@ -174,6 +174,7 @@#define CONFIG_SYS_MONITOR_LEN (768 << 10)/* 768 KiB */ #define CONFIG_IDENT_STRING " Allwinner Technology" +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_ENV_OFFSET (544 << 10)/* (8 + 24 + 512) KiB */ #define CONFIG_ENV_SIZE (128 << 10)/* 128 KiB */
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 14/26 tools: Include fdt_sw.o in libfdt for mkimage
In reply to Simon GlassAt present this file is omitted. It is used to build up a binary device tree. We plan to do this in mkimage, so include this file in the build.
Signed-off-by Simon Glass <[email protected]>
---
tools/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/Makefile +1 -1
@@ -59,7 +59,7 @@ FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o # Flattened device tree objects LIBFDT_OBJS := $(addprefix lib/libfdt/, \ fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_wip.o \ - fdt_region.o) + fdt_region.o fdt_sw.o) RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ rsa-sign.o rsa-verify.o rsa-checksum.o \ rsa-mod-exp.o)
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 15/26 mkimage: Allow a FIT to include an image of any type
In reply to Simon GlassAt present FIT images are set up by providing a device tree source file which is a file with a .its extension. We want to support automatically creating this file based on the image supplied to mkimage. This means that even though the final file type is always IH_TYPE_FLATDT, the image inside may be something else.
Signed-off-by Simon Glass <[email protected]>
---
tools/imagetool.h | 1 + tools/mkimage.c | 33 ++++++++++++++++++++++++++++----- 2 files changed, 29 insertions(+), 5 deletions(-)
tools/imagetool.h +1 -0
@@ -61,6 +61,7 @@ struct image_tool_params {int require_keys;/* 1 to mark signing keys as 'required' */ int file_size;/* Total size of output file */ int orig_file_size;/* Original size for file before padding */ +int fit_image_type;/* Image type to put into the FIT */ };/*
tools/mkimage.c +28 -5
@@ -112,10 +112,14 @@ static void usage(const char *msg)static void process_args (int argc,char **argv) {char *ptr; +int type =IH_TYPE_INVALID ; +char *datafile =NULL ; +int expecting;int opt; + expecting =IH_TYPE_COUNT ;/* Unknown */ while ((opt =getopt (argc, argv, -"a:A:cC:d:D:e:f:Fk:K:ln:O:rR:sT:vVx" )) !=-1 ) { +"-a:A:cC:d:D:e:f:Fk:K:ln:O:rR:sT:vVx" )) !=-1 ) {switch (opt) {case 'a' : params.addr =strtoul (optarg, &ptr,16 );
@@ -162,6 +166,7 @@ static void process_args(int argc, char **argv)* The flattened image tree (FIT) format * requires a flattened device tree image type */ + params.fit_image_type = params.type; params.type =IH_TYPE_FLATDT ; params.fflag =1 ;break ;
@@ -196,11 +201,12 @@ static void process_args(int argc, char **argv) params.skipcpy =1 ;break ;case 'T' : - params.type =genimg_get_type_id (optarg); -if (params.type <0 ) { + type =genimg_get_type_id (optarg); +if (type <0 ) {show_image_types ();usage ("Invalid image type" ); } + expecting = type;break ;case 'v' : params.vflag++;
@@ -211,14 +217,31 @@ static void process_args(int argc, char **argv)case 'x' : params.xflag++;break ; +case 1 : +if (expecting == type || expecting ==IH_TYPE_COUNT ) { + params.imagefile = optarg; + expecting =IH_TYPE_INVALID ; + } +break ;default :usage ("Invalid option" ); } } -if (optind >= argc) +/* +* For auto-generated FIT images we need to know the image type to put +* in the FIT, which is separate from the file's image type (which +* will always be IH_TYPE_FLATDT in this case). +*/ +if (params.type ==IH_TYPE_FLATDT ) { + params.fit_image_type = type; + params.datafile = datafile; + }else if (type !=IH_TYPE_INVALID ) { + params.type = type; + } + +if (!params.imagefile)usage ("Missing output filename" ); - params.imagefile = argv[optind]; }
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 16/26 tools: Add a function to obtain the size of a file
In reply to Simon GlassThis will be used in mkimage when working out the required size of the FIT based on the files to be placed into it.
Signed-off-by Simon Glass <[email protected]>
---
doc/mkimage.1 | 4 ++-- tools/imagetool.c | 22 ++++++++++++++++++++++ tools/imagetool.h | 12 ++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-)
doc/mkimage.1 +2 -2
@@ -164,7 +164,7 @@ skipping those for which keys cannot be found. Also add a comment. .nf .B mkimage -f kernel.its -k /public/signing-keys -K u-boot.dtb \\\\ .br -.B -c "Kernel 3.8 image for production devices" kernel.itb +.B -c """Kernel 3.8 image for production devices""" kernel.itb .fi .P
@@ -175,7 +175,7 @@ with unavailable keys are skipped. .nf .B mkimage -F -k /secret/signing-keys -K u-boot.dtb \\\\ .br -.B -c "Kernel 3.8 image for production devices" kernel.itb +.B -c """Kernel 3.8 image for production devices""" kernel.itb .fi .SH HOMEPAGE
tools/imagetool.c +22 -0
@@ -91,3 +91,25 @@ int imagetool_save_subimage(return 0 ; } + +int imagetool_get_filesize (struct image_tool_params *params,const char *fname) +{ +struct stat sbuf; +int fd; + + fd =open (fname,O_RDONLY |O_BINARY ); +if (fd <0 ) { +fprintf (stderr,"%s: Can't open %s: %s\n" , + params->cmdname, fname,strerror (errno)); +return -1 ; + } + +if (fstat (fd, &sbuf) <0 ) { +fprintf (stderr,"%s: Can't stat %s: %s\n" , + params->cmdname, fname,strerror (errno)); +return -1 ; + } +close (fd); + +return sbuf.st_size; +}
tools/imagetool.h +12 -0
@@ -181,6 +181,18 @@ int imagetool_save_subimage(ulong file_data, ulong file_len); +/** +* imagetool_get_filesize() - Utility function to obtain the size of a file +* +* This function prints a message if an error occurs, showing the error that +* was obtained. +* +* @params: mkimage parameters +* @fname: filename to check +* @return size of file, or -ve value on error +*/ +int imagetool_get_filesize (struct image_tool_params *params,const char *fname); +/* * There is a c file associated with supported image type low level code * for ex. default_image.c, fit_image.c
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 17/26 image: Add functions to obtain short names
In reply to Simon GlassSometimes it is useful to obtain the short name for an Operating System, architecture or compression mechanism. Provide functions for this.
Signed-off-by Simon Glass <[email protected]>
---
common/image.c | 26 ++++++++++++++++++++++---- include/image.h | 27 +++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 4 deletions(-)
common/image.c +22 -4
@@ -603,11 +603,9 @@ const char *genimg_get_type_name(uint8_t type)return (get_table_entry_name (uimage_type,"Unknown Image" , type)); } -const char *genimg_get_type_short_name (uint8_t type) +static const char *genimg_get_short_name (const table_entry_t *table,int val) { -const table_entry_t *table; - - table =get_table_entry (uimage_type, type); + table =get_table_entry (table, val);if (!table)return "unknown" ;#if defined(USE_HOSTCC ) || !defined(CONFIG_NEEDS_MANUAL_RELOC )
@@ -617,12 +615,32 @@ const char *genimg_get_type_short_name(uint8_t type)#endif } +const char *genimg_get_type_short_name (uint8_t type) +{ +return genimg_get_short_name (uimage_type, type); +} +const char *genimg_get_comp_name (uint8_t comp) {return (get_table_entry_name (uimage_comp,"Unknown Compression" , comp)); } +const char *genimg_get_comp_short_name (uint8_t comp) +{ +return genimg_get_short_name (uimage_comp, comp); +} + +const char *genimg_get_os_short_name (uint8_t os) +{ +return genimg_get_short_name (uimage_os, os); +} + +const char *genimg_get_arch_short_name (uint8_t arch) +{ +return genimg_get_short_name (uimage_arch, arch); +} +/** * get_table_entry_id - translate short entry name to id * @table: pointer to a translation table for entries of a specific type
include/image.h +27 -0
@@ -414,7 +414,25 @@ int get_table_entry_id(const table_entry_t *table,char *get_table_entry_name (const table_entry_t *table,char *msg,int id);const char *genimg_get_os_name (uint8_t os); + +/** +* genimg_get_os_short_name() - get the short name for an OS +* +* @param os OS (IH_OS_...) +* @return OS short name, or "unknown" if unknown +*/ +const char *genimg_get_os_short_name (uint8_t comp); +const char *genimg_get_arch_name (uint8_t arch); + +/** +* genimg_get_arch_short_name() - get the short name for an architecture +* +* @param arch Architecture type (IH_ARCH_...) +* @return architecture short name, or "unknown" if unknown +*/ +const char *genimg_get_arch_short_name (uint8_t arch); +const char *genimg_get_type_name (uint8_t type);/**
@@ -426,6 +444,15 @@ const char *genimg_get_type_name(uint8_t type);const char *genimg_get_type_short_name (uint8_t type);const char *genimg_get_comp_name (uint8_t comp); + +/** +* genimg_get_comp_short_name() - get the short name for a compression method +* +* @param comp compression method (IH_COMP_...) +* @return compression method short name, or "unknown" if unknown +*/ +const char *genimg_get_comp_short_name (uint8_t comp); +int genimg_get_os_id (const char *name);int genimg_get_arch_id (const char *name);int genimg_get_type_id (const char *name);
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 18/26 mkimage: Support automatic creating of a FIT without a .its
In reply to Simon GlassAt present, when generating a FIT, mkimage requires a .its file containing the structure of the FIT and referring to the images to be included.
Creating the .its file is a separate step that makes it harder to use FIT. This is not required for creating legacy images.
Often the FIT is pretty standard, consisting of an OS image, some device tree files and a single configuration. We can handle this case automatically and avoid needing a .its file at all.
To start with, support automatically generate the FIT using a new '-f auto' option. Initially this only supports adding a single image (e.g. a linux kernel) and a single configuration.
Signed-off-by Simon Glass <[email protected]>
---
doc/mkimage.1 | 16 +++- tools/fit_image.c | 216 +++++++++++++++++++++++++++++++++++++++++++++++++++++- tools/imagetool.h | 1 + tools/mkimage.c | 8 +- 4 files changed, 235 insertions(+), 6 deletions(-)
doc/mkimage.1 +15 -1
@@ -108,10 +108,15 @@ Provide special options to the device tree compiler that is used to create the image. .TP -.BI "\-f [" "image tree source file" "]" +.BI "\-f [" "image tree source file" " | " "auto" "]" Image tree source file that describes the structure and contents of the FIT image. +This can be automatically generated for some simple cases. +Use "-f auto" for this. In that case the arguments -d, -A, -O, -T, -C, -a +and -e are used to specify the image to include in the FIT and its attributes. +No .its file is required. + .TP .BI "\-F" Indicates that an existing FIT image should be modified. No dtc
@@ -178,6 +183,15 @@ with unavailable keys are skipped. .B -c """Kernel 3.8 image for production devices""" kernel.itb .fi +.P +Create a FIT image containing a kernel, using automatic mode. No .its file +is required. +.nf +.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\ +.br +.B -c """Kernel 4.4 image for production devices""" -d vmlinuz kernel.itb +.fi + .SH HOMEPAGE http://www.denx.de/wiki/U-Boot/WebHome .PP
tools/fit_image.c +214 -2
246 lines not on this page · raw message
tools/imagetool.h +1 -0
@@ -61,6 +61,7 @@ struct image_tool_params {int require_keys;/* 1 to mark signing keys as 'required' */ int file_size;/* Total size of output file */ int orig_file_size;/* Original size for file before padding */ +bool auto_its;/* Automatically create the .its file */ int fit_image_type;/* Image type to put into the FIT */ };
tools/mkimage.c +5 -3
@@ -85,7 +85,7 @@ static void usage(const char *msg)" -x ==> set XIP (execute in place)\n" , params.cmdname);fprintf (stderr, -" %s [-D dtc_options] [-f fit-image.its|-F] fit-image\n" , +" %s [-D dtc_options] [-f fit-image.its|-f auto|-F] fit-image\n" , params.cmdname);fprintf (stderr, " -D => set all options for device tree compiler\n"
@@ -159,7 +159,8 @@ static void process_args(int argc, char **argv) params.eflag =1 ;break ;case 'f' : - params.datafile = optarg; + datafile = optarg; + params.auto_its = !strcmp (datafile,"auto" );/* no break */ case 'F' :/*
@@ -235,7 +236,8 @@ static void process_args(int argc, char **argv)*/ if (params.type ==IH_TYPE_FLATDT ) { params.fit_image_type = type; - params.datafile = datafile; +if (!params.auto_its) + params.datafile = datafile; }else if (type !=IH_TYPE_INVALID ) { params.type = type; }
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 19/26 mkimage: Support adding device tree files to a FIT
In reply to Simon GlassTo make the auto-FIT feature useful we need to be able to provide a list of device tree files on the command line for mkimage to add into the FIT. Add support for this feature.
So far there is no support for hashing or verified boot using this method. For those cases, a .its file must still be provided.
Signed-off-by Simon Glass <[email protected]>
---
doc/mkimage.1 | 17 ++++++++++ tools/fit_image.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++----- tools/imagetool.h | 9 ++++++ tools/mkimage.c | 38 +++++++++++++++++++++- 4 files changed, 151 insertions(+), 9 deletions(-)
doc/mkimage.1 +17 -0
@@ -97,6 +97,10 @@ Set XIP (execute in place) flag. .B Create FIT image: .TP +.BI "\-b +Specifies that the following arguments are device tree binary files (.dtb). + +.TP .BI "\-c [" "comment" "]" Specifies a comment to be added when signing. This is typically a useful message which describes how the image was signed or some other useful
@@ -125,6 +129,10 @@ This can be used to sign images with additional keys after initial image creation. .TP +.BI "\-i +Specifies that the following arguments are image files. + +.TP .BI "\-k [" "key_directory" "]" Specifies the directory containing keys to use for signing. This directory should contain a private key file <name>.key for use with signing and a
@@ -191,6 +199,15 @@ is required. .br .B -c """Kernel 4.4 image for production devices""" -d vmlinuz kernel.itb .fi +.P +Create a FIT image containing a kernel and some device tree files, using +automatic mode. No .its file is required. +.nf +.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\ +.br +.B -c """Kernel 4.4 image for production devices""" -d vmlinuz \\\\ +.B -b rk3288-firefly.dts rk3288-jerry.dts -i kernel.itb +.fi .SH HOMEPAGE http://www.denx.de/wiki/U-Boot/WebHome
tools/fit_image.c +88 -8
144 lines not on this page · raw message
tools/imagetool.h +9 -0
@@ -27,6 +27,13 @@#define IH_ARCH_DEFAULT IH_ARCH_INVALID +/* Information about a file that needs to be placed into the FIT */ +struct content_info { +struct content_info *next; +int type;/* File type (IH_TYPE_...) */ +const char *fname; +}; +/* * This structure defines all such variables those are initialized by * mkimage and dumpimage main core and need to be referred by image
@@ -63,6 +70,8 @@ struct image_tool_params {int orig_file_size;/* Original size for file before padding */ bool auto_its;/* Automatically create the .its file */ int fit_image_type;/* Image type to put into the FIT */ +struct content_info *content_head;/* List of files to include */ +struct content_info *content_tail; };/*
tools/mkimage.c +37 -1
@@ -109,6 +109,24 @@ static void usage(const char *msg)exit (EXIT_FAILURE ); } +static int add_content (int type,const char *fname) +{ +struct content_info *cont; + + cont =calloc (1 ,sizeof (*cont)); +if (!cont) +return -1 ; + cont->type = type; + cont->fname = fname; +if (params.content_tail) + params.content_tail->next = cont; +else + params.content_head = cont; + params.content_tail = cont; + +return 0 ; +} +static void process_args (int argc,char **argv) {char *ptr;
@@ -119,7 +137,7 @@ static void process_args(int argc, char **argv) expecting =IH_TYPE_COUNT ;/* Unknown */ while ((opt =getopt (argc, argv, -"-a:A:cC:d:D:e:f:Fk:K:ln:O:rR:sT:vVx" )) !=-1 ) { +"-a:A:bcC:d:D:e:f:Fik:K:ln:O:rR:sT:vVx" )) !=-1 ) {switch (opt) {case 'a' : params.addr =strtoul (optarg, &ptr,16 );
@@ -134,6 +152,9 @@ static void process_args(int argc, char **argv)if (params.arch <0 )usage ("Invalid architecture" );break ; +case 'b' : + expecting =IH_TYPE_FLATDT ; +break ;case 'c' : params.comment = optarg;break ;
@@ -171,6 +192,9 @@ static void process_args(int argc, char **argv) params.type =IH_TYPE_FLATDT ; params.fflag =1 ;break ; +case 'i' : + expecting = type; +break ;case 'k' : params.keydir = optarg;break ;
@@ -222,6 +246,18 @@ static void process_args(int argc, char **argv)if (expecting == type || expecting ==IH_TYPE_COUNT ) { params.imagefile = optarg; expecting =IH_TYPE_INVALID ; + }else if (expecting ==IH_TYPE_INVALID ) { +fprintf (stderr, +"%s: Unknown content type: use -b before device tree files" , + params.cmdname); +exit (EXIT_FAILURE ); + }else { +if (add_content (expecting, optarg)) { +fprintf (stderr, +"%s: Out of memory adding content '%s'" , + params.cmdname, optarg); +exit (EXIT_FAILURE ); + } }break ;default :
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 19/26 mkimage: Support adding device tree files to a FIT
Quoted 3 lines · Simon Glass
To make the auto-FIT feature useful we need to be able to provide a list of device tree files on the command line for mkimage to add into the FIT. Add support for this feature.
[snip]
Quoted 21 lines
+.BI "\-b
doc/mkimage.1 +7
-0+Specifies that the following arguments are device tree binary files (.dtb). + +.TP .BI "\-c [" "comment" "]" Specifies a comment to be added when signing. This is typically a useful message which describes how the image was signed or some other useful@@ -125,6 +129,10 @@ This can be used to sign images with additional keys after initial image creation. .TP +.BI "\-i +Specifies that the following arguments are image files. + +.TP .BI "\-k [" "key_directory" "]" Specifies the directory containing keys to use for signing. This directory should contain a private key file <name>.key for use with signing and a@@ -191,6 +199,15 @@ is required. .br .B -c """Kernel 4.4 image for production devices""" -d vmlinuz kernel.itb
doc/mkimage.1 is required. · line 210
Quoted 10 lines
doc/mkimage.1 +9
-0.fi +.P +Create a FIT image containing a kernel and some device tree files, using +automatic mode. No .its file is required. +.nf +.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\ +.br +.B -c """Kernel 4.4 image for production devices""" -d vmlinuz \\\\ +.B -b rk3288-firefly.dts rk3288-jerry.dts -i kernel.itb +.fi
OK, I'm confused in a few ways here. First, we don't need quotes around the space separated list of dts files? Second, we need dts not dtb? Third, I think this would be a better example if (as I suspect we need really) it was a full path to the output rather than assuming that we've copied the files to $PWD. Fourth, -i is inputs or outputs? The help reads like inputs and is where I assume we would say vmlinuz here and not use -d and then end with our output of kernel.itb. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160211/11bb4742/attachment.sig>
PATCH 19/26 mkimage: Support adding device tree files to a FIT
Hi Tom,
Quoted 32 lines · Tom Rini
Quoted 3 lines · Simon Glass
To make the auto-FIT feature useful we need to be able to provide a list of device tree files on the command line for mkimage to add into the FIT. Add support for this feature.
[snip]
Quoted 26 lines
+.BI "\-b
doc/mkimage.1 +11
-0+Specifies that the following arguments are device tree binary files (.dtb). + +.TP .BI "\-c [" "comment" "]" Specifies a comment to be added when signing. This is typically a useful message which describes how the image was signed or some other useful@@ -125,6 +129,10 @@ This can be used to sign images with additional keys after initial image creation. .TP +.BI "\-i +Specifies that the following arguments are image files. + +.TP .BI "\-k [" "key_directory" "]" Specifies the directory containing keys to use for signing. This directory should contain a private key file <name>.key for use with signing and a@@ -191,6 +199,15 @@ is required. .br .B -c """Kernel 4.4 image for production devices""" -d vmlinuz kernel.itb .fi +.P +Create a FIT image containing a kernel and some device tree files, using +automatic mode. No .its file is required. +.nf
Quoted 8 lines
doc/mkimage.1 is required. · line 210
Quoted 5 lines
doc/mkimage.1 +5
-0+.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\ +.br +.B -c """Kernel 4.4 image for production devices""" -d vmlinuz \\\\ +.B -b rk3288-firefly.dts rk3288-jerry.dts -i kernel.itb +.fiOK, I'm confused in a few ways here. First, we don't need quotes around the space separated list of dts files?
No, the -b option introduces the list, which can be as long as needed. I want to make it possible to specify a list easily.
Quoted 1 line
Second, we need dts not dtb?
Eek, no, it should be dtb.
Quoted 3 lines
Third, I think this would be a better example if (as I suspect we need really) it was a full path to the output rather than assuming that we've copied the files to $PWD.
OK
Quoted 3 lines
Fourth, -i is inputs or outputs? The help
reads like inputs and is where I assume we would say vmlinuz here and not use -d and then end with our output of kernel.itb. Thanks!
-i introduces the image file, whic his an output. The -d provides the datafile, which is the file that is is put inside the FIT.
Maybe we can change things to make this a bit clearer. We could perhaps have an option to end the list of dtb files, instead of the option to signal the output file is next? Or maybe we can avoid -i altogether since the last arg should be the output file.
Regards,
Simon
PATCH 19/26 mkimage: Support adding device tree files to a FIT
Quoted 44 lines · Simon Glass
Hi Tom,
Quoted 32 lines · Tom Rini
Quoted 3 lines · Simon Glass
To make the auto-FIT feature useful we need to be able to provide a list of device tree files on the command line for mkimage to add into the FIT. Add support for this feature.
[snip]
Quoted 26 lines
+.BI "\-b
doc/mkimage.1 +11
-0+Specifies that the following arguments are device tree binary files (.dtb). + +.TP .BI "\-c [" "comment" "]" Specifies a comment to be added when signing. This is typically a useful message which describes how the image was signed or some other useful@@ -125,6 +129,10 @@ This can be used to sign images with additional keys after initial image creation. .TP +.BI "\-i +Specifies that the following arguments are image files. + +.TP .BI "\-k [" "key_directory" "]" Specifies the directory containing keys to use for signing. This directory should contain a private key file <name>.key for use with signing and a@@ -191,6 +199,15 @@ is required. .br .B -c """Kernel 4.4 image for production devices""" -d vmlinuz kernel.itb .fi +.P +Create a FIT image containing a kernel and some device tree files, using +automatic mode. No .its file is required. +.nfQuoted 8 lines
doc/mkimage.1 is required. · line 210
Quoted 5 lines
doc/mkimage.1 +5
-0+.B mkimage -f auto -A arm -O linux -T kernel -C none -a 43e00000 -e 0 \\\\ +.br +.B -c """Kernel 4.4 image for production devices""" -d vmlinuz \\\\ +.B -b rk3288-firefly.dts rk3288-jerry.dts -i kernel.itb +.fiOK, I'm confused in a few ways here. First, we don't need quotes around the space separated list of dts files?
Quoted 2 lines
No, the -b option introduces the list, which can be as long as needed. I want to make it possible to specify a list easily.
OK. I don't see how that works in the code, but if that's the intent and it works, OK :)
Quoted 14 lines
Quoted 1 line
Second, we need dts not dtb?
Eek, no, it should be dtb.
Quoted 3 lines
Third, I think this would be a better example if (as I suspect we need really) it was a full path to the output rather than assuming that we've copied the files to $PWD.
OK
Quoted 3 lines
Fourth, -i is inputs or outputs? The help
reads like inputs and is where I assume we would say vmlinuz here and not use -d and then end with our output of kernel.itb. Thanks!
Quoted 7 lines
-i introduces the image file, whic his an output. The -d provides the datafile, which is the file that is is put inside the FIT.
Maybe we can change things to make this a bit clearer. We could perhaps have an option to end the list of dtb files, instead of the option to signal the output file is next? Or maybe we can avoid -i altogether since the last arg should be the output file.
Yes, I don't think we need -i at all. The last argument is the output, always, and -f auto instead of -f some-file.its is all we need to know it's a FIT output. And, ah, so I guess this is how -b is implemented then. Yes, this seems rather awkward. Maybe we instead implement a sometimes optional (ie previous use cases) -o flag to say output file is ... and also make sure it's clear in the man page at least that -b consumes following arguments as the DT list until another flag is passed?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160212/b1740b3a/attachment.sig>
PATCH 20/26 mkimage: Support placing data outside the FIT
In reply to Simon GlassOne limitation of FIT is that all the data is 'inline' within it, using a 'data' property in each image node. This means that to find out what is in the FIT it is necessary to scan the entire file. Once loaded it can be scanned and then the images can be copied to the correct place in memory.
In SPL it can take a significant amount of time to copy images around in memory. Also loading data that does not end up being used is wasteful. It would be useful if the FIT were small, acting as a directory, with the actual data stored elsewhere.
This allows SPL to load the entire FIT, without the images, then load the images it wants later.
Add a -E option to mkimage to request that it output an 'external' FIT.
Signed-off-by Simon Glass <[email protected]>
---
doc/mkimage.1 | 9 +++ doc/uImage.FIT/source_file_format.txt | 20 ++++++- tools/fit_image.c | 109 ++++++++++++++++++++++++++++++++++ tools/imagetool.h | 1 + tools/mkimage.c | 5 +- 5 files changed, 142 insertions(+), 2 deletions(-)
doc/mkimage.1 +9 -0
@@ -112,6 +112,15 @@ Provide special options to the device tree compiler that is used to create the image. .TP +.BI "\-E +After processing, move the image data outside the FIT and store a data offset +in the FIT. Images will be placed one after the other immediately after the +FIT, with each one aligned to a 4-byte boundary. The existing 'data' property +in each image will be replaced with 'data-offset' and 'data-size' properties. +A 'data-offset' of 0 indicates that it starts in the first (4-byte aligned) +byte after the FIT. + +.TP .BI "\-f [" "image tree source file" " | " "auto" "]" Image tree source file that describes the structure and contents of the FIT image.
doc/uImage.FIT/source_file_format.txt +19 -1
@@ -2,6 +2,7 @@ U-boot new uImage source file format (bindings definition) ========================================================== Author: Marian Balakowicz <[email protected]> +External data additions, 25/1/16 Simon Glass <[email protected]> 1) Introduction ---------------
@@ -262,7 +263,24 @@ Older, 2.4 kernel and 2.6 non-FDT kernel do not use FDT blob, in such cases not* be specified in a configuration node. -8) Examples +8) External data +---------------- + +The above format shows a 'data' property which holds the data for each image. +It is also possible for this data to reside outside the FIT itself. This +allows the FIT to be quite small, so that it can be loaded and scanned +without loading a large amount of data. Then when an image is needed it can +be loaded from an external source. + +In this case the 'data' property is omitted. Instead you can use: + + - data-offset : offset of the data in a separate image store. The image + store is placed immediately after the last byte of the device tree binary, + aligned to a 4-byte boundary. + - data-size : size of the data in bytes + + +9) Examples ----------- Please see doc/uImage.FIT/*.its for actual image source files.
tools/fit_image.c +109 -0
121 lines not on this page · raw message
tools/imagetool.h +1 -0
@@ -72,6 +72,7 @@ struct image_tool_params {int fit_image_type;/* Image type to put into the FIT */ struct content_info *content_head;/* List of files to include */ struct content_info *content_tail; +bool external_data;/* Store data outside the FIT */ };/*
tools/mkimage.c +4 -1
@@ -137,7 +137,7 @@ static void process_args(int argc, char **argv) expecting =IH_TYPE_COUNT ;/* Unknown */ while ((opt =getopt (argc, argv, -"-a:A:bcC:d:D:e:f:Fik:K:ln:O:rR:sT:vVx" )) !=-1 ) { +"-a:A:bcC:d:D:e:Ef:Fik:K:ln:O:rR:sT:vVx" )) !=-1 ) {switch (opt) {case 'a' : params.addr =strtoul (optarg, &ptr,16 );
@@ -179,6 +179,9 @@ static void process_args(int argc, char **argv) } params.eflag =1 ;break ; +case 'E' : + params.external_data = true; +break ;case 'f' : datafile = optarg; params.auto_its = !strcmp (datafile,"auto" );
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 21/26 mkimage: Bring data into the FIT before processing
In reply to Simon GlassSince we now support data outside the FIT image, bring it into the FIT image first before we do any processing. This avoids adding new functionality to the core FIT code for now.
Signed-off-by Simon Glass <[email protected]>
---
tools/fit_image.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+)
tools/fit_image.c +97 -0
@@ -455,6 +455,98 @@ err:return ret; } +static int fit_import_data (struct image_tool_params *params,const char *fname) +{ +void *fdt, *old_fdt; +int fit_size, new_size, size, data_base; +int fd; +struct stat sbuf; +int ret; +int images; +int node; + + fd =mmap_fdt (params->cmdname, fname,0 , &old_fdt, &sbuf, false); +if (fd <0 ) +return -EIO ; + fit_size =fdt_totalsize (old_fdt); + data_base = (fit_size +3 ) & ~3 ; + +/* Allocate space to hold the new FIT */ + size = sbuf.st_size +16384 ; + fdt =malloc (size); +if (!fdt) { +fprintf (stderr,"%s: Failed to allocate memory (%d bytes)\n" , + __func__, size); + ret = -ENOMEM ; + goto err; + } + ret =fdt_open_into (old_fdt, fdt, size); +if (ret) { +debug ("%s: Failed to expand FIT: %s\n" , __func__, +fdt_strerror (errno)); + ret = -EINVAL ; + goto err; + } + + images =fdt_path_offset (fdt,FIT_IMAGES_PATH ); +if (images <0 ) { +debug ("%s: Cannot find /images node: %d\n" , __func__, images); + ret = -EINVAL ; + goto err; + } + +for (node =fdt_first_subnode (fdt, images); + node >=0 ; + node =fdt_next_subnode (fdt, node)) { +int buf_ptr; +int len; + + buf_ptr =fdtdec_get_int (fdt, node,"data-offset" ,-1 ); + len =fdtdec_get_int (fdt, node,"data-size" ,-1 ); +if (buf_ptr ==-1 || len ==-1 ) +continue ; +debug ("Importing data size %x\n" , len); + + ret =fdt_setprop (fdt, node,"data" , fdt + data_base + buf_ptr, + len); +if (ret) { +debug ("%s: Failed to write property: %s\n" , __func__, +fdt_strerror (ret)); + ret = -EINVAL ; + goto err; + } + } + +munmap (fdt, sbuf.st_size); +close (fd); + +/* Pack the FDT and place the data after it */ +fdt_pack (fdt); + + new_size =fdt_totalsize (fdt); +debug ("Size expanded from %x to %x\n" , fit_size, new_size); + + fd =open (fname,O_RDWR |O_CREAT |O_TRUNC |O_BINARY ,0666 ); +if (fd <0 ) { +fprintf (stderr,"%s: Can't open %s: %s\n" , + params->cmdname, fname,strerror (errno)); + goto err; + } +if (write (fd, fdt, new_size) != new_size) { +debug ("%s: Failed to write external data to file %s\n" , + __func__,strerror (errno)); + ret = -EIO ; + goto err; + } +close (fd); + + ret =0 ; + +err: +close (fd); +return ret; +} +/** * fit_handle_file - main FIT file processing function *
@@ -510,6 +602,11 @@ static int fit_handle_file(struct image_tool_params *params) goto err_system; } +/* Move the data so it is internal to the FIT, if needed */ + ret =fit_import_data (params, tmpfile); +if (ret) + goto err_system; +/* * Set hashes for images in the blob. Unfortunately we may need more * space in either FDT, so keep trying until we succeed.
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 22/26 spl: Add a way for boards to select which device tree to load
In reply to Simon GlassSPL calls this function with each device tree it can find in the FIT. The board should implement this function, using whatever hardware detection it can muster to determine the correct device tree.
Signed-off-by Simon Glass <[email protected]>
---
include/image.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/image.h +13 -0
@@ -1155,4 +1155,17 @@ ulong android_image_get_kload(const struct andr_img_hdr *hdr);#endif /* CONFIG_ANDROID_BOOT_IMAGE */ +/** +* board_fit_config_name_match() - Check for a matching board name +* +* This is used when SPL loads a FIT containing multiple device tree files +* and wants to work out which one to use. The description of each one is +* passed to this function. The description comes from the 'description' field +* in each (FDT) image node. +* +* @name: Device tree description +* @return 0 if this device tree should be used, non-zero to try the next +*/ +int board_fit_config_name_match (const char *name); +#endif /* __IMAGE_H__ */
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 23/26 spl: Add an option to load a FIT containing U-Boot
In reply to Simon GlassThis provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree.
Signed-off-by Simon Glass <[email protected]>
---
Kconfig | 11 +++ common/spl/Makefile | 1 + common/spl/spl_fit.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/spl.h | 18 +++++ 4 files changed, 222 insertions(+) create mode 100644 common/spl/spl_fit.c
Kconfig +11 -0
@@ -215,6 +215,17 @@ config SYS_TEXT_BASE help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT" + depends on FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency"
common/spl/Makefile +1 -0
@@ -10,6 +10,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o +obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
common/spl/spl_fit.c new file +192 -0
192 lines not on this page · raw message
include/spl.h +18 -0
@@ -29,6 +29,24 @@ struct spl_image_info {u32 flags; }; +/* +* Information required to load data from a device +* +* @dev: Pointer to the device, e.g. struct mmc * +* @priv: Private data for the device +* @bl_len: Block length for reading in bytes +* @read: Function to call to read from the device +*/ +struct spl_load_info { +void *dev; +void *priv; +int bl_len; +ulong (*read)(struct spl_load_info *load,ulong sector,ulong count, +void *buf); +}; + +int spl_load_simple_fit (struct spl_load_info *info,ulong sector,void *fdt); +#define SPL_COPY_PAYLOAD_ONLY 1extern struct spl_image_info spl_image;
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 23/26 spl: Add an option to load a FIT containing U-Boot
Hi Simon,
Quoted 55 lines · Simon Glass
This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree.
Signed-off-by Simon Glass <[email protected]>---
Kconfig | 11 +++ common/spl/Makefile | 1 + common/spl/spl_fit.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/spl.h | 18 +++++ 4 files changed, 222 insertions(+) create mode 100644 common/spl/spl_fit.cKconfig +11
-0@@ -215,6 +215,17 @@ config SYS_TEXT_BASE help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT" + depends on FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency"common/spl/Makefile +1
-0@@ -10,6 +10,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o +obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.ocommon/spl/spl_fit.c new file +1
-0@@ -0,0 +1,192 @@ +/*
common/spl/spl_fit.c line 11
Quoted 10 lines
common/spl/spl_fit.c new file +10
-0+* Copyright (C) 2016 Google, Inc +* Written by Simon Glass <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <errno.h> +#include <spl.h> +
I would like to test your patchset, I am trying with a i.MX6 (I want to build wandboard). It looks like that image.h is missing here.
common/spl/spl_fit.c: In function 'fdt_getprop_u32':common/spl/spl_fit.c:20:2: warning: implicit declaration of function 'fdt_getprop' [-Wimplicit-function-declaration]
However, in image.h it looks like that IMAGE_USE_FIT is not correctly set. I am looking why, I have just added these to wandboard_defconfig:
+CONFIG_FIT=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_LIST="wandboard"
Best regards,
Stefano
Quoted 211 lines
common/spl/spl_fit.c new file +181
-0+static ulong fdt_getprop_u32 (const void *fdt,int node,const char *prop) +{ +const u32 *cell; +int len; + + cell =fdt_getprop (fdt, node, prop, &len); +if (len !=sizeof (*cell)) +return -1U ; +return fdt32_to_cpu (*cell); +} + +static int spl_fit_select_fdt (const void *fdt,int images,int *fdt_offsetp) +{ +const char *name, *fdt_name; +int conf, node, fdt_node; +int len; + + *fdt_offsetp =0 ; + conf =fdt_path_offset (fdt,FIT_CONFS_PATH ); +if (conf <0 ) { +debug ("%s: Cannot find /configurations node: %d\n" , __func__, + conf); +return -EINVAL ; + } +for (node =fdt_first_subnode (fdt, conf); + node >=0 ; + node =fdt_next_subnode (fdt, node)) { + name =fdt_getprop (fdt, node,"description" , &len); +if (!name) +return -EINVAL ; +if (board_fit_config_name_match (name)) +continue ; + +debug ("Selecting config '%s'" , name); + fdt_name =fdt_getprop (fdt, node,FIT_FDT_PROP , &len); +if (!fdt_name) { +debug ("%s: Cannot find fdt name property: %d\n" , + __func__, len); +return -EINVAL ; + } + +debug (", fdt '%s'\n" , fdt_name); + fdt_node =fdt_subnode_offset (fdt, images, fdt_name); +if (fdt_node <0 ) { +debug ("%s: Cannot find fdt node '%s': %d\n" , + __func__, fdt_name, fdt_node); +return -EINVAL ; + } + + *fdt_offsetp =fdt_getprop_u32 (fdt, fdt_node,"data-offset" ); + len =fdt_getprop_u32 (fdt, fdt_node,"data-size" ); +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT +printf ("FIT: Selected '%s'\n" , name); +#endif + +return len; + } + +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT +printf ("No matching DT out of these options:\n" ); +for (node =fdt_first_subnode (fdt, conf); + node >=0 ; + node =fdt_next_subnode (fdt, node)) { + name =fdt_getprop (fdt, node,"name" , &len); +printf (" %s\n" , name); + } +#endif + +return -ENOENT ; +} + +int spl_load_simple_fit (struct spl_load_info *info,ulong sector,void *fit) +{ +int sectors; +ulong size, load; +unsigned long count; +int node, images; +void *load_ptr; +int fdt_offset, fdt_len; +int data_offset, data_size; +int base_offset; +int src_sector; +void *dst; + +/* +* Figure out where the external images start. This is the base for the +* data-offset properties in each image. +*/ + size =fdt_totalsize (fit); + size = (size +3 ) & ~3 ; + base_offset = (size +3 ) & ~3 ; + +/* +* So far we only have one block of data from the FIT. Read the entire +* thing, including that first block, placing it so it finishes before +* where we will load the image. +* +* Note that we will load the image such that its first byte will be +* at the load address. Since that byte may be part-way through a +* block, we may load the image up to one block before the load +* address. So take account of that here by subtracting an addition +* block length from the FIT start position. +* +* In fact the FIT has its own load address, but we assume it cannot +* be before CONFIG_SYS_TEXT_BASE. +*/ + fit = (void *)(CONFIG_SYS_TEXT_BASE - size - info->bl_len); + sectors = (size + info->bl_len -1 ) / info->bl_len; + count = info->read (info, sector, sectors, fit); +debug ("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n" , + sector, sectors, fit, count); +if (count ==0 ) +return -EIO ; + +/* find the firmware image to load */ + images =fdt_path_offset (fit,FIT_IMAGES_PATH ); +if (images <0 ) { +debug ("%s: Cannot find /images node: %d\n" , __func__, images); +return -1 ; + } + node =fdt_first_subnode (fit, images); +if (node <0 ) { +debug ("%s: Cannot find first image node: %d\n" , __func__, node); +return -1 ; + } + +/* Get its information and set up the spl_image structure */ + data_offset =fdt_getprop_u32 (fit, node,"data-offset" ); + data_size =fdt_getprop_u32 (fit, node,"data-size" ); + load =fdt_getprop_u32 (fit, node,"load" ); +debug ("data_offset=%x, data_size=%x\n" , data_offset, data_size); + spl_image.load_addr = load; + spl_image.entry_point = load; + spl_image.os =IH_OS_U_BOOT ; + +/* +* Work out where to place the image. We read it so that the first +* byte will be at 'load'. This may mean we need to load it starting +* before then, since we can only read whole blocks. +*/ + sectors = (data_size + info->bl_len -1 ) / info->bl_len; + data_offset += base_offset; + load_ptr = (void *)load; +debug ("U-Boot size %x, data %p\n" , data_size, load_ptr); + dst = load_ptr - (data_offset % info->bl_len); + +/* Read the image */ + src_sector = sector + data_offset / info->bl_len; +debug ("image: data_offset=%x, dst=%p, src_sector=%x, sectors=%x\n" , + data_offset, dst, src_sector, sectors); + count = info->read (info, src_sector, sectors, dst); +if (count != sectors) +return -EIO ; + +/* Figure out which device tree the board wants to use */ + fdt_len =spl_fit_select_fdt (fit, images, &fdt_offset); +if (fdt_len <0 ) +return fdt_len; + +/* +* Read the device tree and place it after the image. There may be +* some extra data before it since we can only read entire blocks. +*/ + dst = load_ptr + data_size; + fdt_offset += base_offset; + count = info->read (info, sector + fdt_offset / info->bl_len, sectors, + dst); +debug ("fit read %x sectors to %x, dst %p, data_offset %x\n" , + sectors, spl_image.load_addr, dst, fdt_offset); +if (count != sectors) +return -EIO ; + +/* +* Copy the device tree so that it starts immediately after the image. +* After this we will have the U-Boot image and its device tree ready +* for us to start. +*/ +memcpy (dst, dst + fdt_offset % info->bl_len, fdt_len); + +return 0 ; +}include/spl.h +18
-0@@ -29,6 +29,24 @@ struct spl_image_info {u32 flags; }; +/* +* Information required to load data from a device +* +* @dev: Pointer to the device, e.g. struct mmc * +* @priv: Private data for the device +* @bl_len: Block length for reading in bytes +* @read: Function to call to read from the device +*/ +struct spl_load_info { +void *dev; +void *priv; +int bl_len; +ulong (*read)(struct spl_load_info *load,ulong sector,ulong count, +void *buf); +}; + +int spl_load_simple_fit (struct spl_load_info *info,ulong sector,void *fdt); +#define SPL_COPY_PAYLOAD_ONLY 1extern struct spl_image_info spl_image;
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 23/26 spl: Add an option to load a FIT containing U-Boot
Hi Stefano,
Quoted 79 lines · Stefano Babic
Hi Simon,
Quoted 55 lines · Simon Glass
This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree.
Signed-off-by Simon Glass <[email protected]>---
Kconfig | 11 +++ common/spl/Makefile | 1 + common/spl/spl_fit.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/spl.h | 18 +++++ 4 files changed, 222 insertions(+) create mode 100644 common/spl/spl_fit.cKconfig +11
-0@@ -215,6 +215,17 @@ config SYS_TEXT_BASE help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT" + depends on FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency"common/spl/Makefile +1
-0@@ -10,6 +10,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o +obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.ocommon/spl/spl_fit.c new file +1
-0@@ -0,0 +1,192 @@ +/* common/spl/spl_fit.c line 11
Quoted 10 lines
common/spl/spl_fit.c new file +10
-0+* Copyright (C) 2016 Google, Inc +* Written by Simon Glass <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <errno.h> +#include <spl.h> +I would like to test your patchset, I am trying with a i.MX6 (I want to build wandboard). It looks like that
image.his missing here.
common/spl/spl_fit.c: In function 'fdt_getprop_u32':common/spl/spl_fit.c:20:2: warning: implicit declaration of function 'fdt_getprop' [-Wimplicit-function-declaration]However, in
image.hit looks like thatIMAGE_USE_FITis not correctly set. I am looking why, I have just added these towandboard_defconfig:
Review
Quoted 4 lines
(quoted diff) +4
-0+CONFIG_FIT=y +CONFIG_SPL_OF_LIBFDT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_OF_LIST="wandboard"
Sorry I missed this email at the time.
Did you figure it out? I don't see a build error with that board, but I have only tested with the settings as in the tree.
I added those options but I don't see that error...
Quoted 4 lines
Best regards,
Stefano
[snip]
Regards,
Simon
PATCH 23/26 spl: Add an option to load a FIT containing U-Boot
Quoted 89 lines · Simon Glass
Hi Stefano,
Quoted 79 lines · Stefano Babic
Hi Simon,
Quoted 55 lines · Simon Glass
This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree.
Signed-off-by Simon Glass <[email protected]>---
Kconfig | 11 +++ common/spl/Makefile | 1 + common/spl/spl_fit.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/spl.h | 18 +++++ 4 files changed, 222 insertions(+) create mode 100644 common/spl/spl_fit.cKconfig +11
-0@@ -215,6 +215,17 @@ config SYS_TEXT_BASE help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT" + depends on FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency"common/spl/Makefile +1
-0@@ -10,6 +10,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o +obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.ocommon/spl/spl_fit.c new file +1
-0@@ -0,0 +1,192 @@ +/* common/spl/spl_fit.c line 11
Quoted 10 lines
common/spl/spl_fit.c new file +10
-0+* Copyright (C) 2016 Google, Inc +* Written by Simon Glass <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <errno.h> +#include <spl.h> +I would like to test your patchset, I am trying with a i.MX6 (I want to build wandboard). It looks like that
image.his missing here.
common/spl/spl_fit.c: In function 'fdt_getprop_u32':common/spl/spl_fit.c:20:2: warning: implicit declaration of function 'fdt_getprop' [-Wimplicit-function-declaration]However, in
image.hit looks like thatIMAGE_USE_FITis not correctly set. I am looking why, I have just added these towandboard_defconfig:Review
Quoted 4 lines
(quoted diff) +4
-0+CONFIG_FIT=y +CONFIG_SPL_OF_LIBFDT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_OF_LIST="wandboard"Sorry I missed this email at the time.
Quoted 4 lines
Did you figure it out? I don't see a build error with that board, but I have only tested with the settings as in the tree.
I added those options but I don't see that error...
It was my mistake, I could build it - sorry for noise.
Regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 24/26 spl: Add a way to specify a list of device trees to include
In reply to Simon GlassWhen building a FIT, more than one device tree can be included. The board can select (at run-time) the one that it wants.
Add a Kconfig option to allow the list of devices trees (supported by the board) to be specified.
When using SPL_LOAD_FIT, build u-boot.img in FIT format instead of the legacy image format. Include all the listed device tree files in this FIT.
Signed-off-by Simon Glass <[email protected]>
---
Makefile | 10 +++++++++- dts/Kconfig | 10 ++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-)
Makefile +9 -1
@@ -903,9 +903,16 @@ quiet_cmd_cpp_cfg = CFG $@ cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< +ifdef CONFIG_SPL_LOAD_FIT +MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ + -b $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -i +else MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" +endif MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
@@ -918,7 +925,8 @@ MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage -u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE +u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \ + $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE $(call if_changed,mkimage) u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
dts/Kconfig +10 -0
@@ -59,6 +59,16 @@ config DEFAULT_DEVICE_TREE It can be overridden from the command line: $ make DEVICE_TREE=<device-tree-name> +config OF_LIST + string "List of device tree files to include for DT control" + depends on SPL_LOAD_FIT + help + This option specifies a list of device tree files to use for DT + control. These will be packaged into a FIT. At run-time, SPL will + select the correct DT to use by examining the hardware (e.g. + reading a board ID value). This is a list of device tree files + (without the directory or .dtb suffix) separated by <space>. + config OF_SPL_REMOVE_PROPS string "List of device tree properties to drop for SPL" depends on SPL_OF_CONTROL
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 25/26 spl: Support loading a FIT from MMC
In reply to Simon GlassDetect a FIT when loading from MMC and handle it using the new FIT SPL support.
Signed-off-by Simon Glass <[email protected]>
---
common/spl/spl_mmc.c | 75 +++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 57 insertions(+), 18 deletions(-)
common/spl/spl_mmc.c +57 -18
@@ -18,41 +18,80 @@DECLARE_GLOBAL_DATA_PTR ; +static int mmc_load_legacy (struct mmc *mmc,ulong sector, +struct image_header *header) +{ +u32 image_size_sectors; +unsigned long count; + +spl_parse_image_header (header); +/* convert size to sectors - round up */ + image_size_sectors = (spl_image.size + mmc->read_bl_len -1 ) / + mmc->read_bl_len; + +/* Read the header too to avoid extra memcpy */ + count = mmc->block_dev.block_read (&mmc->block_dev, sector, + image_size_sectors, + (void *)(ulong )spl_image.load_addr); +debug ("read %x sectors to %x\n" , image_size_sectors, + spl_image.load_addr); +if (count != image_size_sectors) +return -EIO ; + +return 0 ; +} + +#ifdef CONFIG_SPL_LOAD_FIT +static ulong h_spl_load_read (struct spl_load_info *load,ulong sector, +ulong count,void *buf) +{ +struct mmc *mmc = load->dev; + +return mmc->block_dev.block_read (&mmc->block_dev, sector, count, buf); +} +#endif +static int mmc_load_image_raw_sector (struct mmc *mmc,unsigned long sector) {unsigned long count; -u32 image_size_sectors;struct image_header *header; +int ret =0 ; header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -sizeof (struct image_header ));/* read image header to find the image size & load address */ count = mmc->block_dev.block_read (&mmc->block_dev, sector,1 , header); -debug ("read sector %lx, count=%lu\n" , sector, count); -if (count ==0 ) +debug ("hdr read sector %lx, count=%lu\n" , sector, count); +if (count ==0 ) { + ret = -EIO ; goto end; + } -if (image_get_magic (header) !=IH_MAGIC ) { +switch (image_get_magic (header)) { +case IH_MAGIC : + ret =mmc_load_legacy (mmc, sector, header); +break ; +#ifdef CONFIG_SPL_LOAD_FIT +case FDT_MAGIC : { +struct spl_load_info load; + +debug ("Found FIT\n" ); + load.dev = mmc; + load.priv =NULL ; + load.bl_len = mmc->read_bl_len; + load.read = h_spl_load_read; + ret =spl_load_simple_fit (&load, sector, header); +break ; + } +#endif +default :puts ("bad magic\n" );return -1 ; } -spl_parse_image_header (header); - -/* convert size to sectors - round up */ - image_size_sectors = (spl_image.size + mmc->read_bl_len -1 ) / - mmc->read_bl_len; - -/* Read the header too to avoid extra memcpy */ - count = mmc->block_dev.block_read (&mmc->block_dev, sector, - image_size_sectors, - (void *)(ulong )spl_image.load_addr); -debug ("read %x sectors to %x\n" , image_size_sectors, - spl_image.load_addr); - end: -if (count ==0 ) { +if (ret) {#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts ("spl: mmc block read error\n" );#endif
Signature · 1 line
2.7.0.rc3.207.g0ac5344
PATCH 26/26 RFC: sunxi: Enable SPL FIT support
In reply to Simon GlassEnable SPL FIT support for the Linksprite pcDuino3 as an example of how this feature is used.
This is only for demonstration purposes and is not to be applied.
Signed-off-by Simon Glass <[email protected]>
---
arch/arm/cpu/armv7/sunxi/board.c | 5 +++++ configs/Linksprite_pcDuino3_defconfig | 3 +++ 2 files changed, 8 insertions(+)
arch/arm/cpu/armv7/sunxi/board.c +5 -0
@@ -103,6 +103,11 @@ static int gpio_init(void)return 0 ; } +int board_fit_config_name_match (const char *name) +{ +return strcmp (name,"sun7i-a20-pcduino3" ); +} +int spl_board_load_image (void ) {debug ("Returning to FEL sp=%x, lr=%x\n" , fel_stash.sp, fel_stash.lr);
configs/Linksprite_pcDuino3_defconfig +3 -0
@@ -14,3 +14,6 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_OF_LIST="sun7i-a20-pcduino3 sun7i-a20-bananapro"
Signature · 1 line
2.7.0.rc3.207.g0ac5344
Hi Simon,
2016-01-29 1:39 GMT+09:00 Simon Glass <[email protected]>:
Quoted 5 lines
We need a way to support more than one board per binary in U-Boot with device tree. Various methods have been discussed. The one that seems to make the most sense is to adjust SPL so that it can load a FIT which contains U-Boot and several device tree binaries. This is how things with with Linux:
load a FIT and select the correct device tree to pass to Linux.
I've just skimmed over the git-logs, but I am confused.
Please makes it clearer why this is useful.
In your way, how SPL is handled?
SPL is much more board-specific than U-Boot proper. So, I assume SPL would remain as a per-board image even after achieving one U-Boot proper for multi-boards.
Let's say we want to support Board-A, Board-B, Board-C with one U-Boot proper.
The U-Boot proper + FIT (including DTB-A, DTB-B, DTB-C) would be generated by one-shot
and by one defconfig.
But, we would still have to do
make board_a_defconfig && make
make board_b_defconfig && make
make board_c_defconfig && make
to generate SPL for each of the three.
Is this correct?
Supposing my guess is correct, this series would not contribute to decreasing the number of defconfig files.
Please explain which problem you are solving with this series.
Signature · 2 lines
Best Regards Masahiro Yamada
A message that is not in the archive (sent off-list or not yet received): CAK7LNARoFApxsiEw0Qtqw_s4dbN9TWLjrJ8c0zt69gjnnrdeWg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 37 lines · Masahiro Yamada
Hi Simon,
2016-01-29 1:39 GMT+09:00 Simon Glass <[email protected]>:
Quoted 5 lines
We need a way to support more than one board per binary in U-Boot with device tree. Various methods have been discussed. The one that seems to make the most sense is to adjust SPL so that it can load a FIT which contains U-Boot and several device tree binaries. This is how things with with Linux:
load a FIT and select the correct device tree to pass to Linux.I've just skimmed over the git-logs, but I am confused.
Please makes it clearer why this is useful.
In your way, how SPL is handled?SPL is much more board-specific than U-Boot proper. So, I assume SPL would remain as a per-board image even after achieving one U-Boot proper for multi-boards.
Let's say we want to support Board-A, Board-B, Board-C with one U-Boot proper.
The U-Boot proper + FIT (including DTB-A, DTB-B, DTB-C) would be generated by one-shot
and by one defconfig.But, we would still have to do
make
board_a_defconfig&& make
makeboard_b_defconfig&& make
makeboard_c_defconfig&& maketo generate SPL for each of the three.
Is this correct?
Quoted 6 lines
Supposing my guess is correct, this series would not contribute to decreasing the number of defconfig files.
Please explain which problem you are solving with this series.
It won't be just one board. We need this so that we can replicate existing (and very useful) functionality. Today, am335x_evm_config supports Beaglebone White, Beaglebone Black (could be faked enough for U-Boot), AM335x GP EVM, AM335x EVM SK and if you tweak the default UART AM335x IDK EVM. Each of these is different enough that they have their own DT that we will need to pass up to U-Boot, and their own config file. With Simon's series we'll be able to move am335x_evm_config up to DM in SPL and possibly even remove some of the am335x_evm subconfigs we have today, once those specific options also move to Kconfig.
Signature · 1 line
Tom
2016-02-16 21:17 GMT+09:00 Tom Rini <trini-OWPKS81ov/FWk0Htik3J/[email protected]>:
Quoted 45 lines · Masahiro Yamada
Quoted 37 lines
Hi Simon,
2016-01-29 1:39 GMT+09:00 Simon Glass <[email protected]>:
Quoted 5 lines
We need a way to support more than one board per binary in U-Boot with device tree. Various methods have been discussed. The one that seems to make the most sense is to adjust SPL so that it can load a FIT which contains U-Boot and several device tree binaries. This is how things with with Linux:
load a FIT and select the correct device tree to pass to Linux.I've just skimmed over the git-logs, but I am confused.
Please makes it clearer why this is useful.
In your way, how SPL is handled?SPL is much more board-specific than U-Boot proper. So, I assume SPL would remain as a per-board image even after achieving one U-Boot proper for multi-boards.
Let's say we want to support Board-A, Board-B, Board-C with one U-Boot proper.
The U-Boot proper + FIT (including DTB-A, DTB-B, DTB-C) would be generated by one-shot
and by one defconfig.But, we would still have to do
make
board_a_defconfig&& make
makeboard_b_defconfig&& make
makeboard_c_defconfig&& maketo generate SPL for each of the three.
Is this correct?Quoted 6 lines
Supposing my guess is correct, this series would not contribute to decreasing the number of defconfig files.
Please explain which problem you are solving with this series.
Quoted 9 lines
It won't be just one board. We need this so that we can replicate existing (and very useful) functionality. Today,
am335x_evm_configsupports Beaglebone White, Beaglebone Black (could be faked enough for U-Boot), AM335x GP EVM, AM335x EVM SK and if you tweak the default UART AM335x IDK EVM. Each of these is different enough that they have their own DT that we will need to pass up to U-Boot, and their own config file. With Simon's series we'll be able to moveam335x_evm_configup to DM in SPL and possibly even remove some of theam335x_evmsubconfigs we have today, once those specific options also move toKconfig.
So, this series is useful to merge some boards
that are different enough to have their own DT,
but that are similar enough to share one SPL binary, correct?
Signature · 2 lines
Best Regards Masahiro Yamada
A message that is not in the archive (sent off-list or not yet received): CAK7LNAS01SnJMefoZVSsqP7jS9bvkRFYZwK5uLoEG1+q_0uzzQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 56 lines · Masahiro Yamada
2016-02-16 21:17 GMT+09:00 Tom Rini <trini-OWPKS81ov/FWk0Htik3J/[email protected]>:
Quoted 45 lines · Masahiro Yamada
Quoted 37 lines
Hi Simon,
2016-01-29 1:39 GMT+09:00 Simon Glass <[email protected]>:
Quoted 5 lines
We need a way to support more than one board per binary in U-Boot with device tree. Various methods have been discussed. The one that seems to make the most sense is to adjust SPL so that it can load a FIT which contains U-Boot and several device tree binaries. This is how things with with Linux:
load a FIT and select the correct device tree to pass to Linux.I've just skimmed over the git-logs, but I am confused.
Please makes it clearer why this is useful.
In your way, how SPL is handled?SPL is much more board-specific than U-Boot proper. So, I assume SPL would remain as a per-board image even after achieving one U-Boot proper for multi-boards.
Let's say we want to support Board-A, Board-B, Board-C with one U-Boot proper.
The U-Boot proper + FIT (including DTB-A, DTB-B, DTB-C) would be generated by one-shot
and by one defconfig.But, we would still have to do
make
board_a_defconfig&& make
makeboard_b_defconfig&& make
makeboard_c_defconfig&& maketo generate SPL for each of the three.
Is this correct?Quoted 6 lines
Supposing my guess is correct, this series would not contribute to decreasing the number of defconfig files.
Please explain which problem you are solving with this series.
Quoted 9 lines
It won't be just one board. We need this so that we can replicate existing (and very useful) functionality. Today,
am335x_evm_configsupports Beaglebone White, Beaglebone Black (could be faked enough for U-Boot), AM335x GP EVM, AM335x EVM SK and if you tweak the default UART AM335x IDK EVM. Each of these is different enough that they have their own DT that we will need to pass up to U-Boot, and their own config file. With Simon's series we'll be able to moveam335x_evm_configup to DM in SPL and possibly even remove some of theam335x_evmsubconfigs we have today, once those specific options also move toKconfig.
Quoted 3 lines
So, this series is useful to merge some boards
that are different enough to have their own DT,
but that are similar enough to share one SPL binary, correct?
Yes. It _may_ even be useful later on to support a more broad set of boards than we do today (ie it's not impossible that one binary could support the TI AM43xx EVMs as well, or all TI EVMs that have the EEPROM that identifies the model, for some narrow scope of boot devices).
Signature · 1 line
Tom