Bluez LE: Unable to get readings from LE devices
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello,
We are working on integrating a set of medical devices from TaiDoc using Bluez. These devices work very well on Android and iPhone. We can get it paired to a Linux machine successfully using our custom agent. However, after the first reading, our driver goes into a loop trying to retrieve the reading unsuccessfully.
With release 5.37, the services and characteristics kept on loading and unloading. However, with the recent patches, btmon gives error asking for pin or key. The devices don't have any pin to authenticate. I'm attaching btmon and Bluez output. Would appreciate any feedback.
Measurement Reading bluetoothd and btmon output:
bluetoothd[6591]: src/adapter.c:connected_callback() hci0 device C0:26:DF:00:05:5A connected eir_len 0
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: src/device.c:device_attach_att() Elevating security level since LTK is available
bluetoothd[6591]: attrib/gattrib.c:g_attrib_ref() 0xeda6f0: g_attrib_ref=1
bluetoothd[6591]: src/service.c:change_state() 0xee1a10: device C0:26:DF:00:05:5A profile :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 state changed: disconnected -> connecting (0) bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_connected() Device connected.
bluetoothd[6591]: src/gatt-client.c:register_notify() Re-register subscribed notification client
bluetoothd[6591]: src/adapter.c:dev_disconnected() Device C0:26:DF:00:05:5A disconnected, reason 2
bluetoothd[6591]: src/adapter.c:adapter_remove_connection()
bluetoothd[6591]: plugins/policy.c:disconnect_cb() reason 2
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0xe
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e
bluetoothd[6591]: src/device.c:device_bonding_failed() status 14
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/device.c:gatt_service_removed() start: 0x0001, end: 0x0007
bluetoothd[6591]: src/service.c:change_state() 0xee1330: device C0:26:DF:00:05:5A profile gap-profile state changed: connecting -> disconnected (-103)
bluetoothd[6591]: src/device.c:device_profile_connected() gap-profile Software caused connection abort (103)
bluetoothd[6591]: src/service.c:change_state() 0xee1330: device C0:26:DF:00:05:5A profile gap-profile state changed: disconnected -> unavailable (0)
bluetoothd[6591]: profiles/gap/gas.c:gap_driver_remove() GAP profile remove (C0:26:DF:00:05:5A)
bluetoothd[6591]: src/service.c:btd_service_unref() 0xee1330: ref=0
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_service_removed() GATT Services Removed - start: 0x0001, end: 0x0007
bluetoothd[6591]: src/device.c:gatt_service_removed() start: 0x0008, end: 0x000b
bluetoothd[6591]: src/service.c:change_state() 0xee1700: device C0:26:DF:00:05:5A profile Proximity Reporter GATT Driver state changed: connecting -> disconnected (-103) bluetoothd[6591]: src/device.c:device_profile_connected() Proximity Reporter GATT Driver Software caused connection abort (103)
bluetoothd[6591]: src/service.c:change_state() 0xee1700: device C0:26:DF:00:05:5A profile Proximity Reporter GATT Driver state changed: disconnected -> unavailable (0) bluetoothd[6591]: profiles/proximity/reporter.c:unregister_reporter_device() unregister on device /org/bluez/hci0/dev_C0_26_DF_00_05_5A
bluetoothd[6591]: src/service.c:btd_service_unref() 0xee1700: ref=0
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_service_removed() GATT Services Removed - start: 0x0008, end: 0x000b
bluetoothd[6591]: src/device.c:gatt_service_removed() start: 0x000c, end: 0x0011
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_service_removed() GATT Services Removed - start: 0x000c, end: 0x0011
bluetoothd[6591]: src/gatt-client.c:unregister_service() Removing GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c
bluetoothd[6591]: src/gatt-client.c:unregister_characteristic() Removing GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c/char000d bluetoothd[6591]: src/gatt-client.c:unregister_descriptor() Removing GATT descriptor: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c/char000d/desc000f bluetoothd[6591]: src/gatt-client.c:unregister_characteristic() Removing GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c/char0010 bluetoothd[6591]: src/device.c:gatt_service_removed() start: 0x0012, end: 0x0015
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_service_removed() GATT Services Removed - start: 0x0012, end: 0x0015
bluetoothd[6591]: src/gatt-client.c:unregister_service() Removing GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0012
bluetoothd[6591]: src/gatt-client.c:unregister_characteristic() Removing GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0012/char0013 bluetoothd[6591]: src/gatt-client.c:unregister_descriptor() Removing GATT descriptor: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0012/char0013/desc0015 bluetoothd[6591]: src/device.c:gatt_service_removed() start: 0x0016, end: 0x001a
bluetoothd[6591]: src/service.c:change_state() 0xedab70: device C0:26:DF:00:05:5A profile deviceinfo state changed: connecting -> disconnected (-103)
bluetoothd[6591]: src/device.c:device_profile_connected() deviceinfo Software caused connection abort (103)
bluetoothd[6591]: src/service.c:change_state() 0xedab70: device C0:26:DF:00:05:5A profile deviceinfo state changed: disconnected -> unavailable (0)
bluetoothd[6591]: src/service.c:btd_service_unref() 0xedab70: ref=0
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_service_removed() GATT Services Removed - start: 0x0016, end: 0x001a
bluetoothd[6591]: src/gatt-client.c:unregister_service() Removing GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0016
bluetoothd[6591]: src/gatt-client.c:unregister_characteristic() Removing GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0016/char0017 bluetoothd[6591]: src/gatt-client.c:unregister_characteristic() Removing GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0016/char0019 bluetoothd[6591]: src/device.c:gatt_service_removed() start: 0x001b, end: 0xffff
bluetoothd[6591]: src/service.c:change_state() 0xee1a10: device C0:26:DF:00:05:5A profile :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 state changed: connecting -> disconnected (-103) bluetoothd[6591]: src/device.c:device_profile_connected() :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 Software caused connection abort (103) bluetoothd[6591]: src/service.c:change_state() 0xee1a10: device C0:26:DF:00:05:5A profile :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 state changed: disconnected -> unavailable (0) bluetoothd[6591]: src/gatt-database.c:profile_device_remove() :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 removed
bluetoothd[6591]: src/service.c:btd_service_unref() 0xee1a10: ref=0
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_service_removed() GATT Services Removed - start: 0x001b, end: 0xffff
bluetoothd[6591]: src/gatt-client.c:unregister_service() Removing GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service001b
bluetoothd[6591]: src/gatt-client.c:unregister_characteristic() Removing GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service001b/char001c bluetoothd[6591]: src/gatt-client.c:notify_client_unref() owner :1.31
bluetoothd[6591]: src/gatt-client.c:notify_client_free() owner :1.31
bluetoothd[6591]: src/gatt-client.c:unregister_descriptor() Removing GATT descriptor: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service001b/char001c/desc001e bluetoothd[6591]: src/device.c:att_disconnected_cb()
bluetoothd[6591]: src/device.c:att_disconnected_cb() Software caused connection abort (103)
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_disconnected() Device disconnected. Cleaning up.
bluetoothd[6591]: attrib/gattrib.c:g_attrib_unref() 0xeda6f0: g_attrib_unref=0
bluetoothd[6591]: src/adapter.c:connected_callback() hci0 device C0:26:DF:00:05:5A connected eir_len 0
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: src/device.c:device_attach_att() Elevating security level since LTK is available
bluetoothd[6591]: attrib/gattrib.c:g_attrib_ref() 0xed9d50: g_attrib_ref=1
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_connected() Device connected.
bluetoothd[6591]: src/device.c:load_gatt_db() Restoring C0:26:DF:00:05:5A gatt database from file
bluetoothd[6591]: No cache for C0:26:DF:00:05:5A
bluetoothd[6591]: src/adapter.c:dev_disconnected() Device C0:26:DF:00:05:5A disconnected, reason 2
bluetoothd[6591]: src/adapter.c:adapter_remove_connection()
bluetoothd[6591]: plugins/policy.c:disconnect_cb() reason 2
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0xe
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e
bluetoothd[6591]: src/device.c:device_bonding_failed() status 14
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/device.c:att_disconnected_cb()
bluetoothd[6591]: src/device.c:att_disconnected_cb() Software caused connection abort (103)
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_disconnected() Device disconnected. Cleaning up.
bluetoothd[6591]: attrib/gattrib.c:g_attrib_unref() 0xed9d50: g_attrib_unref=0
bluetoothd[6591]: src/adapter.c:connected_callback() hci0 device C0:26:DF:00:05:5A connected eir_len 0
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: src/device.c:device_attach_att() Elevating security level since LTK is available
bluetoothd[6591]: attrib/gattrib.c:g_attrib_ref() 0xed9d50: g_attrib_ref=1
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_connected() Device connected.
bluetoothd[6591]: src/device.c:load_gatt_db() Restoring C0:26:DF:00:05:5A gatt database from file
bluetoothd[6591]: No cache for C0:26:DF:00:05:5A
bluetoothd[6591]: src/adapter.c:dev_disconnected() Device C0:26:DF:00:05:5A disconnected, reason 2
bluetoothd[6591]: src/adapter.c:adapter_remove_connection()
bluetoothd[6591]: plugins/policy.c:disconnect_cb() reason 2
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0xe
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e
bluetoothd[6591]: src/device.c:device_bonding_failed() status 14
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/device.c:att_disconnected_cb()
bluetoothd[6591]: src/device.c:att_disconnected_cb() Software caused connection abort (103)
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_disconnected() Device disconnected. Cleaning up.
bluetoothd[6591]: attrib/gattrib.c:g_attrib_unref() 0xed9d50: g_attrib_unref=0
bluetoothd[6591]: src/adapter.c:connected_callback() hci0 device C0:26:DF:00:05:5A connected eir_len 0
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: src/device.c:device_attach_att() Elevating security level since LTK is available
bluetoothd[6591]: attrib/gattrib.c:g_attrib_ref() 0xed9d50: g_attrib_ref=1
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_connected() Device connected.
bluetoothd[6591]: src/device.c:load_gatt_db() Restoring C0:26:DF:00:05:5A gatt database from file
bluetoothd[6591]: No cache for C0:26:DF:00:05:5A
bluetoothd[6591]: src/adapter.c:dev_disconnected() Device C0:26:DF:00:05:5A disconnected, reason 2
bluetoothd[6591]: src/adapter.c:adapter_remove_connection()
bluetoothd[6591]: plugins/policy.c:disconnect_cb() reason 2
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0xe
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e
bluetoothd[6591]: src/device.c:device_bonding_failed() status 14
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/device.c:att_disconnected_cb()
bluetoothd[6591]: src/device.c:att_disconnected_cb() Software caused connection abort (103)
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_disconnected() Device disconnected. Cleaning up.
bluetoothd[6591]: attrib/gattrib.c:g_attrib_unref() 0xed9d50: g_attrib_unref=0
bluetoothd[6591]: src/adapter.c:connected_callback() hci0 device C0:26:DF:00:05:5A connected eir_len 0
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: src/device.c:device_attach_att() Elevating security level since LTK is available
bluetoothd[6591]: attrib/gattrib.c:g_attrib_ref() 0xed9d50: g_attrib_ref=1
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_connected() Device connected.
bluetoothd[6591]: src/device.c:load_gatt_db() Restoring C0:26:DF:00:05:5A gatt database from file
bluetoothd[6591]: No cache for C0:26:DF:00:05:5A
bluetoothd[6591]: src/adapter.c:dev_disconnected() Device C0:26:DF:00:05:5A disconnected, reason 2
bluetoothd[6591]: src/adapter.c:adapter_remove_connection()
bluetoothd[6591]: plugins/policy.c:disconnect_cb() reason 2
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0xe
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e
bluetoothd[6591]: src/device.c:device_bonding_failed() status 14
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/device.c:att_disconnected_cb()
bluetoothd[6591]: src/device.c:att_disconnected_cb() Software caused connection abort (103)
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_disconnected() Device disconnected. Cleaning up.
bluetoothd[6591]: attrib/gattrib.c:g_attrib_unref() 0xed9d50: g_attrib_unref=0
Quoted 1 line
HCI Event: LE Meta Event (
0x3e) plen 41 [hci0] 296.925551
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Random (0x01)
Address: C0:26:DF:00:05:5A (Static)
Data length: 29
Name (complete): TAIDOC TD3128
Appearance: Blood Pressure: Arm (0x0381)
Flags: 0x05
LE Limited Discoverable Mode
BR/EDR Not Supported
RSSI: -76 dBm (0xb4)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 296.925575
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 296.954523
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 [hci0] 296.954539
Scan interval: 60.000 msec (0x0060)
Scan window: 30.000 msec (0x0030)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: C0:26:DF:00:05:5A (Static)
Own address type: Public (0x00)
Min connection interval: 50.00 msec (0x0028)
Max connection interval: 70.00 msec (0x0038)
Connection latency: 0x0000
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 [hci0] 296.955522
LE Create Connection (0x08|0x000d) ncmd 2
Status: Success (0x00)Quoted 1 line
HCI Event: LE Meta Event (
0x3e) plen 19 [hci0] 297.445535
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 3585
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: C0:26:DF:00:05:5A (Static)
Connection interval: 70.00 msec (0x0038)
Connection latency: 0.00 msec (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
@ Device Connected: C0:26:DF:00:05:5A (2) flags 0x0000
< HCI Command: LE Start Encryption (0x08|0x0019) plen 28 [hci0] 297.445757
Handle: 3585
Random number: 0xf53b3985eb209692
Encrypted diversifier: 0xe663
Long term key: 212ee6d22e00b56286a69a3322d4ed00Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 [hci0] 297.446496
LE Start Encryption (0x08|0x0019) ncmd 1
Status: Success (0x00)Quoted 1 line
HCI Event: Encryption Change (
0x08) plen 4 [hci0] 298.597523
Status: PIN or Key Missing (0x06)
Handle: 3585
Encryption: Disabled (0x00)
< HCI Command: Disconnect (0x01|0x0006) plen 3 [hci0] 298.597544
Handle: 3585
Reason: Authentication Failure (0x05)Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 [hci0] 298.598520
Disconnect (0x01|0x0006) ncmd 1
Status: Success (0x00)Quoted 1 line
HCI Event: Disconnect Complete (
0x05) plen 4 [hci0] 298.737520
Status: Success (0x00)
Handle: 3585
Reason: Connection Terminated By Local Host (0x16)
@ Device Disconnected: C0:26:DF:00:05:5A (2) reason 2
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 [hci0] 298.838368
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Public (0x00)
Filter policy: Ignore not in white list (0x01)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 298.839519
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 298.839535
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 298.840507
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)Quoted 1 line
HCI Event: LE Meta Event (
0x3e) plen 41 [hci0] 299.521548
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Random (0x01)
Address: C0:26:DF:00:05:5A (Static)
Data length: 29
Name (complete): TAIDOC TD3128
Appearance: Blood Pressure: Arm (0x0381)
Flags: 0x05
LE Limited Discoverable Mode
BR/EDR Not Supported
RSSI: -77 dBm (0xb3)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 299.521604
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4 [hci0] 299.533517
LE Set Scan Enable (0x08|0x000c) ncmd 2
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 [hci0] 299.533532
Scan interval: 60.000 msec (0x0060)
Scan window: 30.000 msec (0x0030)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: C0:26:DF:00:05:5A (Static)
Own address type: Public (0x00)
Min connection interval: 50.00 msec (0x0028)
Max connection interval: 70.00 msec (0x0038)
Connection latency: 0x0000
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 [hci0] 299.534517
LE Create Connection (0x08|0x000d) ncmd 2
Status: Success (0x00)Quoted 1 line
HCI Event: LE Meta Event (
0x3e) plen 19 [hci0] 300.027526
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 3585
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: C0:26:DF:00:05:5A (Static)
Connection interval: 70.00 msec (0x0038)
Connection latency: 0.00 msec (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
@ Device Connected: C0:26:DF:00:05:5A (2) flags 0x0000
< HCI Command: LE Start Encryption (0x08|0x0019) plen 28 [hci0] 300.027824
Handle: 3585
Random number: 0xf53b3985eb209692
Encrypted diversifier: 0xe663
Long term key: 212ee6d22e00b56286a69a3322d4ed00Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 [hci0] 300.028516
LE Start Encryption (0x08|0x0019) ncmd 1
Status: Success (0x00)Quoted 1 line
HCI Event: Encryption Change (
0x08) plen 4 [hci0] 301.187517
Status: PIN or Key Missing (0x06)
Handle: 3585
Encryption: Disabled (0x00)
< HCI Command: Disconnect (0x01|0x0006) plen 3 [hci0] 301.187536
Handle: 3585
Reason: Authentication Failure (0x05)Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 [hci0] 301.188514
Disconnect (0x01|0x0006) ncmd 1
Status: Success (0x00)Quoted 1 line
HCI Event: Disconnect Complete (
0x05) plen 4 [hci0] 301.257514
Status: Success (0x00)
Handle: 3585
Reason: Connection Terminated By Local Host (0x16)@ Device Disconnected: C0:26:DF:00:05:5A (2) reason 2
Device Paring Bluez output:
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: attrib/gattrib.c:g_attrib_ref() 0xed9d50: g_attrib_ref=1
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_connected() Device connected.
bluetoothd[6591]: src/device.c:load_gatt_db() Restoring C0:26:DF:00:05:5A gatt database from file
bluetoothd[6591]: No cache for C0:26:DF:00:05:5A
bluetoothd[6591]: src/device.c:gatt_debug() MTU exchange complete, with MTU: 23
bluetoothd[6591]: src/device.c:gatt_debug() Primary services found: 6
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0001, end: 0x0007, uuid: 00001800-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0008, end: 0x000b, uuid: 00001801-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x000c, end: 0x0011, uuid: 00001810-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0012, end: 0x0015, uuid: 0000180f-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0016, end: 0x001a, uuid: 0000180a-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x001b, end: 0xffff, uuid: 00001523-1212-efde-1523-785feabcd123
bluetoothd[6591]: src/device.c:gatt_debug() Secondary service discovery failed. ATT ECODE: 0x0a
bluetoothd[6591]: src/adapter.c:new_csrk_callback() hci0 new CSRK for C0:26:DF:00:05:5A type 0
bluetoothd[6591]: src/adapter.c:new_long_term_key_callback() hci0 new LTK for C0:26:DF:00:05:5A type 0 enc_size 16
bluetoothd[6591]: src/device.c:device_set_bonded()
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding 0xecb1a0 status 0x00
bluetoothd[6591]: src/device.c:device_bonding_complete() Proceeding with service discovery
bluetoothd[6591]: src/agent.c:agent_unref() 0xecf490: ref=1
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/adapter.c:trigger_start_discovery()
bluetoothd[6591]: src/adapter.c:cancel_passive_scanning()
bluetoothd[6591]: src/adapter.c:pair_device_complete() Success (0x00)
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0x0
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x00
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/adapter.c:trigger_start_discovery()
bluetoothd[6591]: src/adapter.c:cancel_passive_scanning()
bluetoothd[6591]: src/device.c:gatt_debug() Characteristics found: 3
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0002, end: 0x0003, value: 0x0003, props: 0x0a, uuid: 00002a00-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0004, end: 0x0005, value: 0x0005, props: 0x02, uuid: 00002a01-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0006, end: 0x0007, value: 0x0007, props: 0x02, uuid: 00002a04-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() Characteristics found: 1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0009, end: 0x000b, value: 0x000a, props: 0x20, uuid: 00002a05-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() Descriptors found: 1
bluetoothd[6591]: src/device.c:gatt_debug() handle: 0x000b, uuid: 00002902-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() Characteristics found: 2
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x000d, end: 0x000f, value: 0x000e, props: 0x20, uuid: 00002a35-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0010, end: 0x0011, value: 0x0011, props: 0x02, uuid: 00002a49-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() Descriptors found: 1
bluetoothd[6591]: src/device.c:gatt_debug() handle: 0x000f, uuid: 00002902-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() Characteristics found: 1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0013, end: 0x0015, value: 0x0014, props: 0x12, uuid: 00002a19-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() Descriptors found: 1
bluetoothd[6591]: src/device.c:gatt_debug() handle: 0x0015, uuid: 00002902-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_debug() Characteristics found: 2
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0017, end: 0x0018, value: 0x0018, props: 0x02, uuid: 00002a24-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x0019, end: 0x001a, value: 0x001a, props: 0x02, uuid: 00002a26-0000-1
bluetoothd[6591]: src/device.c:gatt_debug() Characteristics found: 1
bluetoothd[6591]: src/device.c:gatt_debug() start: 0x001c, end: 0xffff, value: 0x001d, props: 0x38, uuid: 00001524-1212-e
bluetoothd[6591]: src/device.c:gatt_debug() Descriptors found: 1
bluetoothd[6591]: src/device.c:gatt_debug() handle: 0x001e, uuid: 00002902-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:gatt_client_ready_cb() status: success, error: 10
bluetoothd[6591]: src/device.c:update_gatt_uuids() UUID Added: 00001800-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:update_gatt_uuids() UUID Added: 00001801-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:update_gatt_uuids() UUID Added: 00001810-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:update_gatt_uuids() UUID Added: 0000180f-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:update_gatt_uuids() UUID Added: 0000180a-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/device.c:update_gatt_uuids() UUID Added: 00001523-1212-efde-1523-785feabcd123
bluetoothd[6591]: src/device.c:device_probe_profiles() Probing profiles for device C0:26:DF:00:05:5A
bluetoothd[6591]: profiles/gap/gas.c:gap_driver_probe() GAP profile probe (C0:26:DF:00:05:5A)
bluetoothd[6591]: src/service.c:change_state() 0xee1330: device C0:26:DF:00:05:5A profile gap-profile state changed: unavailable -> disconnected (0)
bluetoothd[6591]: profiles/gap/gas.c:gap_driver_accept() GAP profile accept (C0:26:DF:00:05:5A)
bluetoothd[6591]: profiles/gap/gas.c:handle_characteristic() Unsupported characteristic: 00002a04-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/service.c:change_state() 0xee1330: device C0:26:DF:00:05:5A profile gap-profile state changed: disconnected -> connecting (0)
bluetoothd[6591]: src/device.c:device_probe_profiles() Probing profiles for device C0:26:DF:00:05:5A
bluetoothd[6591]: profiles/proximity/reporter.c:register_reporter_device() register on device /org/bluez/hci0/dev_C0_26_DF_00_05_5A
bluetoothd[6591]: src/service.c:change_state() 0xee1700: device C0:26:DF:00:05:5A profile Proximity Reporter GATT Driver state changed: unavailable -> disconnected (0) bluetoothd[6591]: src/service.c:change_state() 0xee1700: device C0:26:DF:00:05:5A profile Proximity Reporter GATT Driver state changed: disconnected -> connecting (0) bluetoothd[6591]: src/device.c:device_probe_profiles() Probing profiles for device C0:26:DF:00:05:5A
bluetoothd[6591]: src/device.c:device_probe_profiles() Probing profiles for device C0:26:DF:00:05:5A
bluetoothd[6591]: src/device.c:device_probe_profiles() Probing profiles for device C0:26:DF:00:05:5A
bluetoothd[6591]: src/service.c:change_state() 0xedab70: device C0:26:DF:00:05:5A profile deviceinfo state changed: unavailable -> disconnected (0)
bluetoothd[6591]: profiles/deviceinfo/deviceinfo.c:deviceinfo_driver_accept() deviceinfo profile accept (C0:26:DF:00:05:5A)
bluetoothd[6591]: profiles/deviceinfo/deviceinfo.c:handle_characteristic() Unsupported characteristic: 00002a24-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: profiles/deviceinfo/deviceinfo.c:handle_characteristic() Unsupported characteristic: 00002a26-0000-1000-8000-00805f9b34fb
bluetoothd[6591]: src/service.c:change_state() 0xedab70: device C0:26:DF:00:05:5A profile deviceinfo state changed: disconnected -> connecting (0)
bluetoothd[6591]: src/device.c:device_probe_profiles() Probing profiles for device C0:26:DF:00:05:5A
bluetoothd[6591]: src/device.c:device_svc_resolved() /org/bluez/hci0/dev_C0_26_DF_00_05_5A err 0
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_ready() GATT client ready
bluetoothd[6591]: src/gatt-client.c:create_services() Exporting objects for GATT services: C0:26:DF:00:05:5A
bluetoothd[6591]: src/gatt-client.c:service_create() Exported GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c
bluetoothd[6591]: src/gatt-client.c:characteristic_create() Exported GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c/char000d
bluetoothd[6591]: src/gatt-client.c:descriptor_create() Exported GATT characteristic descriptor: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c/char000d/desc000f bluetoothd[6591]: src/gatt-client.c:characteristic_create() Exported GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service000c/char0010
bluetoothd[6591]: src/gatt-client.c:service_create() Exported GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0012
bluetoothd[6591]: src/gatt-client.c:characteristic_create() Exported GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0012/char0013
bluetoothd[6591]: src/gatt-client.c:descriptor_create() Exported GATT characteristic descriptor: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0012/char0013/desc0015 bluetoothd[6591]: src/gatt-client.c:service_create() Exported GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0016
bluetoothd[6591]: src/gatt-client.c:characteristic_create() Exported GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0016/char0017
bluetoothd[6591]: src/gatt-client.c:characteristic_create() Exported GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service0016/char0019
bluetoothd[6591]: src/gatt-client.c:service_create() Exported GATT service: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service001b
bluetoothd[6591]: src/gatt-client.c:characteristic_create() Exported GATT characteristic: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service001b/char001c
bluetoothd[6591]: src/gatt-client.c:descriptor_create() Exported GATT characteristic descriptor: /org/bluez/hci0/dev_C0_26_DF_00_05_5A/service001b/char001c/desc001e bluetoothd[6591]: src/gatt-database.c:manager_register_profile() sender :1.32
bluetoothd[6591]: src/gatt-database.c:profile_add() Added ":1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123"
bluetoothd[6591]: src/gatt-database.c:profile_device_probe() :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 probed
bluetoothd[6591]: src/service.c:change_state() 0xee1a10: device C0:26:DF:00:05:5A profile :1.32/com/.../gatt_profile/00001523-1212-efde-1523-785feabcd123 state changed: unavailable -> disconnected (0) bluetoothd[6591]: src/device.c:device_set_auto_connect() C0:26:DF:00:05:5A auto connect: 1
bluetoothd[6591]: src/device.c:device_set_auto_connect() Already connected
bluetoothd[6591]: src/adapter.c:add_device_complete() C0:26:DF:00:05:5A (2) added to kernel connect list
bluetoothd[6591]: src/gatt-client.c:notify_client_ref() owner :1.31
bluetoothd[6591]: src/device.c:gatt_debug() Registered handler for "Service Changed": 1
bluetoothd[6591]: profiles/gap/gas.c:read_device_name_cb() GAP Device Name: TAIDOC TD3128
bluetoothd[6591]: profiles/gap/gas.c:read_appearance_cb() GAP Appearance: 0x0381
bluetoothd[6591]: src/adapter.c:start_discovery_timeout()
bluetoothd[6591]: src/adapter.c:start_discovery_timeout() adapter->current_discovery_filter == 0
bluetoothd[6591]: src/adapter.c:start_discovery_complete() status 0x00
bluetoothd[6591]: src/adapter.c:discovering_callback() hci0 type 7 discovering 1 method 0
bluetoothd[6591]: src/adapter.c:stop_discovery() sender :1.29
bluetoothd[6591]: src/adapter.c:discovery_destroy() owner :1.29
bluetoothd[6591]: src/device.c:device_set_rssi_with_delta() rssi 0
bluetoothd[6591]: src/device.c:device_set_tx_power() tx_power 127
bluetoothd[6591]: src/device.c:device_set_rssi_with_delta() rssi 0
bluetoothd[6591]: src/adapter.c:stop_discovery_complete() status 0x00
bluetoothd[6591]: src/adapter.c:trigger_passive_scanning()
bluetoothd[6591]: src/adapter.c:discovering_callback() hci0 type 7 discovering 0 method 0
bluetoothd[6591]: src/adapter.c:dev_disconnected() Device C0:26:DF:00:05:5A disconnected, reason 1
bluetoothd[6591]: src/adapter.c:adapter_remove_connection()
bluetoothd[6591]: plugins/policy.c:disconnect_cb() reason 1
bluetoothd[6591]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr C0:26:DF:00:05:5A type 2 status 0xe
bluetoothd[6591]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e
bluetoothd[6591]: src/device.c:device_bonding_failed() status 14
bluetoothd[6591]: src/adapter.c:resume_discovery()
bluetoothd[6591]: src/device.c:att_disconnected_cb()
bluetoothd[6591]: src/device.c:att_disconnected_cb() Connection timed out (110)
bluetoothd[6591]: src/gatt-client.c:btd_gatt_client_disconnected() Device disconnected. Cleaning up.
bluetoothd[6591]: attrib/gattrib.c:g_attrib_unref() 0xed9d50: g_attrib_unref=0
Luiz Augusto von Dentz
maintainerHi,
Quoted 13 lines · ram
Hello,
We are working on integrating a set of medical devices from TaiDoc using Bluez. These devices work very well on Android and iPhone. We can get it paired to a Linux machine successfully using our custom agent. However, after the first reading, our driver goes into a loop trying to retrieve the reading unsuccessfully.
With release 5.37, the services and characteristics kept on loading and unloading. However, with the recent patches, btmon gives error asking for pin or key. The devices don't have any pin to authenticate. I'm attaching btmon and Bluez output. Would appreciate any feedback.
Quoted 4 lines
Quoted 1 line
HCI Event: Encryption Change (
0x08) plen 4 [hci0] 301.187517Status: PIN or Key Missing (0x06) Handle: 3585 Encryption: Disabled (0x00)
Usually this is cause when one of the sides remove the link key, some controller may automatically attempt to repair but others don't so you would have to remove the link keys of respective devices in both sides and try again. Btw, the following indicate that it was actually possible to connect at some point:
bluetoothd[6591]: profiles/gap/gas.c:read_device_name_cb() GAP Device
Name: TAIDOC TD3128
bluetoothd[6591]: profiles/gap/gas.c:read_appearance_cb() GAP Appearance: 0x0381
Perhaps you device does not really store the link keys persistently, so whenever bluetoothd detects there is actually a LTK it will attempt to use it:
bluetoothd[6591]: src/gatt-database.c:connect_cb() New incoming LE ATT connection
bluetoothd[6591]: src/device.c:device_attach_att() Elevating security level since LTK is available
Which seems to cause a missing link key, it may happen to work with iOS and Android because they reattempt to pair but there exists an option to tell the remote peer to not reuse the link keys across connections you just need to use the no bonding value as per spec:
'No bonding' is used when the device is performing a
Secure Simple Pairing procedure, but does not intend to retain the link key after the physical link is disconnected.
I would keep the policy of not redoing the pairing automatically in case of missing link key error but perhaps the agent shall be called in such case and then depending on the response start a new pairing, so we keep this policy in the agent. Nevertheless it is still a good idea to set the "No bonding' value in case you want to avoid this extra steps while reconnecting.
Signature · 1 line
Luiz Augusto von Dentz
Quoted 10 lines
'No bonding' is used when the device is performing a
Secure Simple Pairing procedure, but does not intend to retain the link key after the physical link is disconnected.I would keep the policy of not redoing the pairing automatically in case of missing link key error but perhaps the agent shall be called in such case and then depending on the response start a new pairing, so we keep this policy in the agent. Nevertheless it is still a good idea to set the "No bonding' value in case you want to avoid this extra steps while reconnecting.
Your explanation of how the "PIN or Key Missing" status could arise matches what I thought might be happening.
But I'm having trouble figuring out how to implement your suggested fix. I know "No Bonding" is one of the values that can be specified in the AuthReq field of a pairing request. But I don't see how I, as a user of BlueZ, can tell it to do so. There doesn't seem to be anything in either org.bluez.Device1 or org.bluez.Agent1 for it.
I think maybe you're suggesting that the LE device it should be specifying "No Bonding". If it's not going to store the Link Key, then indeed it probably should. But unfortunately we can't change that: we don't make the device.
- Ron
Luiz Augusto von Dentz
maintainerHi Ron,
Quoted 23 lines · Ron Harding
Quoted 11 lines
'No bonding' is used when the device is performing a
Secure Simple Pairing procedure, but does not intend to retain the link key
after the physical link is disconnected.I would keep the policy of not redoing the pairing automatically in case of missing link key error but perhaps the agent shall be called in such case and then depending on the response start a new pairing, so we keep this policy in the agent. Nevertheless it is still a good idea to set the "No bonding' value in case you want to avoid this extra steps while reconnecting.
Your explanation of how the "PIN or Key Missing" status could arise matches what I thought might be happening.
But I'm having trouble figuring out how to implement your suggested fix. I know "No Bonding" is one of the values
that can be specified in the AuthReq field of a pairing request. But I don't see how I, as a user of BlueZ, can
tell it to do so. There doesn't seem to be anything in either org.bluez.Device1 or org.bluez.Agent1 for it.
Quoted 4 lines
I think maybe you're suggesting that the LE device it should be specifying "No Bonding". If it's not going to
store the Link Key, then indeed it probably should. But unfortunately we can't change that: we don't make the device.
In that case we would have to expose the 'No Bonding' setting somehow, we do have that already as bondable flag which you can set via MGMT command, but perhaps you only want to set when pairing with a certain device to force it not store the link keys which would probably involving changing APIs. Then again the ideal solution would be for the LE peripheral to actually tell its capabilities properly.
In the other hand perhaps we should focus on "PIN or Key Missing" which is something that can happen when one of the sides remove the link key locally which is much more common, perhaps starting a new pairing and having the user agent to accept/reject the new pairing would be a better fix for this problem.
Signature · 1 line
Luiz Augusto von Dentz