ARM: dts: sun7i: Add dts file for the lamobo-r1 board
Subsystems (3)
PATCH v2 1/1 ARM: dts: sun7i: Add dts file for the lamobo-r1 board
From: Jelle de Jong <[email protected]>
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet boards, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n.
---
Changes in v2:
-Drop custom CPU operating points
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 287 ++++++++++++++++++++++++++++++ 2 files changed, 288 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -669,6 +669,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ + sun7i-a20-lamobo-r1.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts new file +287 -0
287 lines not on this page · raw message
Signature · 1 line
2.7.1
Quoted 5 lines · Hans de Goede
From: Jelle de Jong <[email protected]>
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet boards, and it
s/gigabit ethernet boards/gigabit ethernet ports/ ?
Quoted 6 lines
has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n.
Signed-off-by Jelle de Jong <[email protected]>Signed-off-by Hans de Goede <[email protected]>
Regards,
Karsten
Signature · 3 lines
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der Werbung sowie der Markt- oder Meinungsforschung.
PATCH v2 1/1 ARM: dts: sun7i: Add dts file for the lamobo-r1 board
Hi,
Quoted 8 lines · Karsten Merker
Quoted 5 lines · Hans de Goede
From: Jelle de Jong <[email protected]>
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet boards, and it
s/gigabit ethernet boards/gigabit ethernet ports/ ?
Erm, yes.
Regards,
hans
Quoted 11 lines
Quoted 7 lines
has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n.
Signed-off-by Jelle de Jong <[email protected]>Signed-off-by Hans de Goede <[email protected]>Regards,
Karsten