Skip to contentSkip to conversation

mx7_common: Put early/late init configs into board file

PATCH New Fabio Estevam 2 participants 8 messages Feb 29, 2016 – Mar 25, 2016

Subsystems (2)
Arm (32-bit) Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH v2 1/2 mx7_common: Put early/late init configs into board file

From: Fabio Estevam <[email protected]>

CONFIG_BOARD_EARLY_INIT_F and CONFIG_BOARD_LATE_INIT should not be placed into mx7_common because not all boards need these options.

Move them to the board file instead.

Signed-off-by Fabio Estevam <[email protected]>
Reviewed-by Peng Fan <[email protected]>

---
Changes since v1:
- None

 include/configs/mx7_common.h  | 3 ---
 include/configs/mx7dsabresd.h | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)
include/configs/mx7_common.h +0 -3
index fac7c3f..a78fc7c 100644
@@ -32,9 +32,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
include/configs/mx7dsabresd.h +3 -0
index 2c981e0..d233572 100644
@@ -14,6 +14,9 @@
 #define CONFIG_DBG_MONITOR
 #define PHYS_SDRAM_SIZE			SZ_1G
 
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
 /* Uncomment to enable secure boot support */
 /* #define CONFIG_SECURE_BOOT */
 #define CONFIG_CSF_SIZE			0x4000
Signature · 1 line
1.9.1
author reviewer
#1 lore raw

PATCH v2 2/2 warp7: Add initial support

From: Fabio Estevam <[email protected]>

Add the basic support for Warp7 board.

For more information about this reference design, please visit:

https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform

Signed-off-by Fabio Estevam <[email protected]>
Reviewed-by Peng Fan <[email protected]>

---
Changes since v1:
- Select MX7D in the Kconfig (Peng)

 arch/arm/cpu/armv7/mx7/Kconfig |   7 ++
 board/warp7/Kconfig            |   9 +++
 board/warp7/MAINTAINERS        |   6 ++
 board/warp7/Makefile           |   6 ++
 board/warp7/imximage.cfg       |  95 ++++++++++++++++++++++++++
 board/warp7/warp7.c            | 102 ++++++++++++++++++++++++++++
 configs/warp7_defconfig        |  12 ++++
 include/configs/warp7.h        | 149 +++++++++++++++++++++++++++++++++++++++++
 8 files changed, 386 insertions(+)
 create mode 100644 board/warp7/Kconfig
 create mode 100644 board/warp7/MAINTAINERS
 create mode 100644 board/warp7/Makefile
 create mode 100644 board/warp7/imximage.cfg
 create mode 100644 board/warp7/warp7.c
 create mode 100644 configs/warp7_defconfig
 create mode 100644 include/configs/warp7.h
arch/arm/cpu/armv7/mx7/Kconfig +7 -0
index 97d6238..8e1ddcd 100644
@@ -18,11 +18,18 @@ config TARGET_MX7DSABRESD
 	select DM
 	select DM_THERMAL
 
+config TARGET_WARP7
+	bool "warp7"
+	select MX7D
+	select DM
+	select DM_THERMAL
+
 endchoice
 
 config SYS_SOC
 	default "mx7"
 
 source "board/freescale/mx7dsabresd/Kconfig"
+source "board/warp7/Kconfig"
 
 endif
board/warp7/Kconfig new file +9 -0
new file mode 100644
index 0000000..61c33fb
@@ -0,0 +1,9 @@
+if TARGET_WARP7
+
+config SYS_BOARD
+	default "warp7"
+
+config SYS_CONFIG_NAME
+	default "warp7"
+
+endif
board/warp7/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..1d3ee29
@@ -0,0 +1,6 @@
+WARP7 BOARD
+M:	Fabio Estevam <[email protected]>
+S:	Maintained
+F:	board/warp7/
+F:	include/configs/warp7.h
+F:	configs/warp7_defconfig
board/warp7/Makefile new file +6 -0
new file mode 100644
index 0000000..f39d1d8
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 NXP Semiconductors
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := warp7.o
board/warp7/imximage.cfg new file +95 -0

95 lines not on this page · raw message

board/warp7/warp7.c new file +102 -0

102 lines not on this page · raw message

configs/warp7_defconfig new file +12 -0
new file mode 100644
index 0000000..f37c9f5
@@ -0,0 +1,12 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_TARGET_WARP7=y
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg"
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
include/configs/warp7.h new file +149 -0

149 lines not on this page · raw message

Signature · 1 line
1.9.1
author reviewer
#2 lore raw

PATCH v2 2/2 warp7: Add initial support

Hi Stefano,

Quoted 10 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Add the basic support for Warp7 board.

For more information about this reference design, please visit:

https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform

Signed-off-by Fabio Estevam <[email protected]>
Reviewed-by Peng Fan <[email protected]>

Do you think we could get the support for this new board into 2016.03?

Thanks

#3 lore raw

PATCH v2 2/2 warp7: Add initial support

Hi Fabio,

Quoted 7 lines · Fabio Estevam

Hi Stefano,

Quoted 4 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Add the basic support for Warp7 board.

Quoted 8 lines
Quoted 6 lines

For more information about this reference design, please visit:

https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform

Signed-off-by Fabio Estevam <[email protected]>
Reviewed-by Peng Fan <[email protected]>

Do you think we could get the support for this new board into 2016.03?

Really I have postponed to -next. As we have now two month cycle release, the merge window becomes more strictly and I will try to not let flow patches that are not fixes after window is closed.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#4 lore raw

PATCH v2 2/2 warp7: Add initial support

Quoted 3 lines · Stefano Babic

Really I have postponed to -next. As we have now two month cycle release, the merge window becomes more strictly and I will try to not let flow patches that are not fixes after window is closed.

It makes sense. Just wanted to confirm, thanks.

author reviewer
#5 lore raw

PATCH v2 2/2 warp7: Add initial support

In reply to Stefano Babic

Hi Stefano,

Quoted 3 lines · Stefano Babic

Really I have postponed to -next. As we have now two month cycle release, the merge window becomes more strictly and I will try to not let flow patches that are not fixes after window is closed.

Could this series go into your -next tree then? I would like to submit other patches for warp7.

Thanks

#6 lore raw

PATCH v2 2/2 warp7: Add initial support

Quoted 10 lines · Fabio Estevam

Hi Stefano,

Quoted 3 lines · Stefano Babic

Really I have postponed to -next. As we have now two month cycle release, the merge window becomes more strictly and I will try to not let flow patches that are not fixes after window is closed.

Could this series go into your -next tree then? I would like to submit other patches for warp7.

Yes, I pick them up.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#7 lore raw

PATCH v2 2/2 warp7: Add initial support

Hi Stefano,

Quoted 4 lines · Stefano Babic
Quoted 2 lines

Could this series go into your -next tree then? I would like to submit other patches for warp7.

Yes, I pick them up.

I see the warp7 commit in your -next branch, but not in u-boot-imx master.

Do you plan to apply it to u-boot.imx master?

Thanks