Skip to contentSkip to conversation

arm: sunxi: Add icnova-a20-swac defconfig

PATCH New Stefan Roese 2 participants 2 messages Mar 21, 2016 – Mar 22, 2016 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore

Stefan Roese

author
#0 lore raw

PATCH 1/1 arm: sunxi: Add icnova-a20-swac defconfig

The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit:

http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
http://linux-sunxi.org/In-Circuit_ICnova_A20

This patch adds support for this board, including ethernet, LCD and USB support.

Signed-off-by Stefan Roese <[email protected]>
Cc Marcus Heuer <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Ian Campbell <[email protected]>
---
 board/sunxi/MAINTAINERS           |  5 +++++
 configs/icnova-a20-swac_defconfig | 21 +++++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 configs/icnova-a20-swac_defconfig
board/sunxi/MAINTAINERS +5 -0
index 5ae5ce6..c4fe11f 100644
@@ -121,6 +121,11 @@ M:	Chen-Yu Tsai <[email protected]>
 S:	Maintained
 F:	configs/Hummingbird_A31_defconfig
 
+ICnova-A20-SWAC BOARD
+M:	Stefan Roese <[email protected]>
+S:	Maintained
+F:	configs/icnova-a20-swac_defconfig
+
 ITEAD IBOX BOARD
 M:	Marcus Cooper <[email protected]>
 S:	Maintained
configs/icnova-a20-swac_defconfig new file +21 -0
new file mode 100644
index 0000000..548a07e
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
+CONFIG_MMC0_CD_PIN="PI5"
+CONFIG_USB0_VBUS_PIN="PG11"
+CONFIG_USB0_VBUS_DET="PH7"
+CONFIG_USB1_VBUS_PIN="PG10"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="PH22"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_USB_EHCI_HCD=y
Signature · 1 line
2.7.4
Applied
#1 lore raw

PATCH 1/1 arm: sunxi: Add icnova-a20-swac defconfig

Hi,

Quoted 6 lines · Stefan Roese

The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from In-Circuit:

http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
http://linux-sunxi.org/In-Circuit_ICnova_A20

Quoted 7 lines

This patch adds support for this board, including ethernet, LCD and USB support.

Signed-off-by Stefan Roese <[email protected]>
Cc Marcus Heuer <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Ian Campbell <[email protected]>

Thanks, applied.

Regards,

Hans

Quoted 50 lines
---
  board/sunxi/MAINTAINERS           |  5 +++++
  configs/icnova-a20-swac_defconfig | 21 +++++++++++++++++++++
  2 files changed, 26 insertions(+)

create mode 100644 configs/icnova-a20-swac_defconfig

board/sunxi/MAINTAINERS +5 -0
index 5ae5ce6..c4fe11f 100644
@@ -121,6 +121,11 @@ M:	Chen-Yu Tsai <[email protected]>
  S:	Maintained
  F:	configs/Hummingbird_A31_defconfig
 
+ICnova-A20-SWAC BOARD
+M:	Stefan Roese <[email protected]>
+S:	Maintained
+F:	configs/icnova-a20-swac_defconfig
+
  ITEAD IBOX BOARD
  M:	Marcus Cooper <[email protected]>
  S:	Maintained
configs/icnova-a20-swac_defconfig new file +21 -0
new file mode 100644
index 0000000..548a07e
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
+CONFIG_MMC0_CD_PIN="PI5"
+CONFIG_USB0_VBUS_PIN="PG11"
+CONFIG_USB0_VBUS_DET="PH7"
+CONFIG_USB1_VBUS_PIN="PG10"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="PH22"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_USB_EHCI_HCD=y