ARM: dts: rockchip: small cleanups

PATCH New Heiko Stuebner 3 participants 10 messages Mar 31, 2016 – Apr 6, 2016

Subsystems (3)

Device tree bindings SPI Arm Rockchip

lore

Share & tools

lore

Heiko Stuebner

author maintainer

2016-03-31 20:54 UTC #0 lore raw

cover ARM: dts: rockchip: small cleanups

Fix some missing unitnames on nodes having a reg property and drop unitnames on gpio-keys.

This explicitly leaves out the memory nodes, as it seems memory without unitname will keep being allowed, also to keep compatibility with bootloaders who may insert the actual amount of memory into those nodes. [0]

[0] http://www.spinics.net/lists/arm-kernel/msg494038.html

Heiko Stuebner (5):
ARM: dts: rockchip: fix rk3288 power-domain unit names
ARM: dts: rockchip: fix missing usbphy unit-names
ARM: dts: rockchip: clean up gpio-keys nodes
ARM: dts: rockchip: drop unneeded properties from mipi node
ARM: dts: rockchip: add missing unitname to cpu_leakage efuse

 arch/arm/boot/dts/rk3066a-bqcurie2.dts | 11 +++++------
 arch/arm/boot/dts/rk3066a-rayeager.dts |  7 +++----
 arch/arm/boot/dts/rk3066a.dtsi         |  6 +++---
 arch/arm/boot/dts/rk3188-radxarock.dts |  7 +++----
 arch/arm/boot/dts/rk3188.dtsi          |  6 +++---
 arch/arm/boot/dts/rk3288-evb.dtsi      |  7 +++----
 arch/arm/boot/dts/rk3288-firefly.dtsi  |  7 +++----
 arch/arm/boot/dts/rk3288-popmetal.dts  |  8 +++-----
 arch/arm/boot/dts/rk3288-r89.dts       |  7 +++----
 arch/arm/boot/dts/rk3288.dtsi          | 18 +++++++-----------
 drivers/spi/spi.c                      |  4 ++--
 11 files changed, 38 insertions(+), 50 deletions(-)

Signature · 1 line

2.6.4

Heiko Stuebner

author maintainer

2016-03-31 20:54 UTC #1 lore raw

PATCH 1/5 ARM: dts: rockchip: fix rk3288 power-domain unit names

The power-domain sub-nodes do have reg properties, but so far are missing the expected unit names. So add the missing ones.

Signed-off-by Heiko Stuebner <[email protected]>

---
 arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

arch/arm/boot/dts/rk3288.dtsi +4 -4

index 74eae99..f445d19 100644
@@ -659,7 +659,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio {
+			pd_vio at RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,

@@ -692,7 +692,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc {
+			pd_hevc at RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,

@@ -704,7 +704,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video {
+			pd_video at RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;

@@ -714,7 +714,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu {
+			pd_gpu at RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 			};

Signature · 1 line

2.6.4

Heiko Stuebner

author maintainer

2016-03-31 20:54 UTC #2 lore raw

PATCH 2/5 ARM: dts: rockchip: fix missing usbphy unit-names

In reply to Heiko Stuebner

The usbphy subnodes do have a reg property but no unitname, add them.

Signed-off-by Heiko Stuebner <[email protected]>

---
 arch/arm/boot/dts/rk3066a.dtsi | 4 ++--
 arch/arm/boot/dts/rk3188.dtsi  | 4 ++--
 arch/arm/boot/dts/rk3288.dtsi  | 6 +++---
 drivers/spi/spi.c              | 4 ++--
 4 files changed, 9 insertions(+), 9 deletions(-)

arch/arm/boot/dts/rk3066a.dtsi +2 -2

index cb0a552..c84a306 100644
@@ -207,7 +207,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 17c {
 			#phy-cells = <0>;
 			reg = <0x17c>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -215,7 +215,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 188 {
 			#phy-cells = <0>;
 			reg = <0x188>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3188.dtsi +2 -2

index 9271833..c44c318 100644
@@ -166,7 +166,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 10c {
 			#phy-cells = <0>;
 			reg = <0x10c>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -174,7 +174,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 11c {
 			#phy-cells = <0>;
 			reg = <0x11c>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3288.dtsi +3 -3

index f445d19..ee4085d 100644
@@ -967,7 +967,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 320 {
 			#phy-cells = <0>;
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -975,7 +975,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 334 {
 			#phy-cells = <0>;
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;

@@ -983,7 +983,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy2: usb-phy2 {
+		usbphy2: usb-phy at 348 {
 			#phy-cells = <0>;
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;

drivers/spi/spi.c +2 -2

index de2f2f9..0239b45 100644
@@ -1209,7 +1209,7 @@ static void spi_pump_messages(struct kthread_work *work)
 	struct spi_master *master =
 		container_of(work, struct spi_master, pump_messages);
 
-	__spi_pump_messages(master, true, false);
+	__spi_pump_messages(master, true, master->bus_lock_flag);
 }
 
 static int spi_init_queue(struct spi_master *master)

@@ -2853,7 +2853,7 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message,
  */
 int spi_sync(struct spi_device *spi, struct spi_message *message)
 {
-	return __spi_sync(spi, message, 0);
+	return __spi_sync(spi, message, spi->master->bus_lock_flag);
 }
 EXPORT_SYMBOL_GPL(spi_sync);

Signature · 1 line

2.6.4

Wadim Egorov

2016-04-01 12:32 UTC #3 lore raw

PATCH 2/5 ARM: dts: rockchip: fix missing usbphy unit-names

Hi Heiko,

you have changes in the spi.c file here.

Quoted 107 lines · Heiko Stuebner

The usbphy subnodes do have a reg property but no unitname, add them.

Signed-off-by Heiko Stuebner <[email protected]>

---
 arch/arm/boot/dts/rk3066a.dtsi | 4 ++--
 arch/arm/boot/dts/rk3188.dtsi  | 4 ++--
 arch/arm/boot/dts/rk3288.dtsi  | 6 +++---
 drivers/spi/spi.c              | 4 ++--
 4 files changed, 9 insertions(+), 9 deletions(-)

arch/arm/boot/dts/rk3066a.dtsi +2 -2

index cb0a552..c84a306 100644
@@ -207,7 +207,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 17c {
 			#phy-cells = <0>;
 			reg = <0x17c>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -215,7 +215,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 188 {
 			#phy-cells = <0>;
 			reg = <0x188>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3188.dtsi +2 -2

index 9271833..c44c318 100644
@@ -166,7 +166,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 10c {
 			#phy-cells = <0>;
 			reg = <0x10c>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -174,7 +174,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 11c {
 			#phy-cells = <0>;
 			reg = <0x11c>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3288.dtsi +3 -3

index f445d19..ee4085d 100644
@@ -967,7 +967,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 320 {
 			#phy-cells = <0>;
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -975,7 +975,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 334 {
 			#phy-cells = <0>;
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;

@@ -983,7 +983,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy2: usb-phy2 {
+		usbphy2: usb-phy at 348 {
 			#phy-cells = <0>;
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;

drivers/spi/spi.c +2 -2

index de2f2f9..0239b45 100644
@@ -1209,7 +1209,7 @@ static void spi_pump_messages(struct kthread_work *work)
 	struct spi_master *master =
 		container_of(work, struct spi_master, pump_messages);
 
-	__spi_pump_messages(master, true, false);
+	__spi_pump_messages(master, true, master->bus_lock_flag);
 }
 
 static int spi_init_queue(struct spi_master *master)

@@ -2853,7 +2853,7 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message,
  */
 int spi_sync(struct spi_device *spi, struct spi_message *message)
 {
-	return __spi_sync(spi, message, 0);
+	return __spi_sync(spi, message, spi->master->bus_lock_flag);
 }
 EXPORT_SYMBOL_GPL(spi_sync);

Heiko Stuebner

author maintainer

2016-04-01 13:27 UTC #4 lore raw

PATCH v2 2/5 ARM: dts: rockchip: fix missing usbphy unit-names

The usbphy subnodes do have a reg property but no unitname, add them.

Signed-off-by Heiko Stuebner <[email protected]>

---
Hi Wadim,

thanks for catching this. I needed this change to make my veyron board boot on 4.6-rc1 (it is in the spi-fixes branch already now), and seem to have accidentially commited it after testing.

 arch/arm/boot/dts/rk3066a.dtsi | 4 ++--
 arch/arm/boot/dts/rk3188.dtsi  | 4 ++--
 arch/arm/boot/dts/rk3288.dtsi  | 6 +++---
 4 files changed, 7 insertions(+), 7 deletions(-)

arch/arm/boot/dts/rk3066a.dtsi +2 -2

index cb0a552..c84a306 100644
@@ -207,7 +207,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 17c {
 			#phy-cells = <0>;
 			reg = <0x17c>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -215,7 +215,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 188 {
 			#phy-cells = <0>;
 			reg = <0x188>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3188.dtsi +2 -2

index 9271833..c44c318 100644
@@ -166,7 +166,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 10c {
 			#phy-cells = <0>;
 			reg = <0x10c>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -174,7 +174,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 11c {
 			#phy-cells = <0>;
 			reg = <0x11c>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3288.dtsi +3 -3

index f445d19..ee4085d 100644
@@ -967,7 +967,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy at 320 {
 			#phy-cells = <0>;
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;

@@ -975,7 +975,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy at 334 {
 			#phy-cells = <0>;
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;

@@ -983,7 +983,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy2: usb-phy2 {
+		usbphy2: usb-phy at 348 {
 			#phy-cells = <0>;
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;

Signature · 1 line

2.6.4

Heiko Stuebner

author maintainer

2016-03-31 20:54 UTC #5 lore raw

PATCH 3/5 ARM: dts: rockchip: clean up gpio-keys nodes

In reply to Heiko Stuebner

Drop superfluous #address-cells and #size-cells, rename key-nodes to individual names and also use the key constants intead of numbers.

Reported-by Julien Chauveau <[email protected]>

Signed-off-by Heiko Stuebner <[email protected]>

---
 arch/arm/boot/dts/rk3066a-bqcurie2.dts | 11 +++++------
 arch/arm/boot/dts/rk3066a-rayeager.dts |  7 +++----
 arch/arm/boot/dts/rk3188-radxarock.dts |  7 +++----
 arch/arm/boot/dts/rk3288-evb.dtsi      |  7 +++----
 arch/arm/boot/dts/rk3288-firefly.dtsi  |  7 +++----
 arch/arm/boot/dts/rk3288-popmetal.dts  |  8 +++-----
 arch/arm/boot/dts/rk3288-r89.dts       |  7 +++----
 7 files changed, 23 insertions(+), 31 deletions(-)

arch/arm/boot/dts/rk3066a-bqcurie2.dts +5 -6

index 6d2a5b3..bc674ee 100644
@@ -42,6 +42,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {

@@ -77,21 +78,19 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button at 0 {
+		power {
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;
 			debounce-interval = <100>;
 		};
-		button at 1 {
+		volume-down {
 			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
-			linux,code = <104>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			label = "GPIO Key Vol-";
 			linux,input-type = <1>;
 			debounce-interval = <100>;

arch/arm/boot/dts/rk3066a-rayeager.dts +3 -4

index 3a5989b..6e7f218 100644
@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {

@@ -61,14 +62,12 @@
 
 	keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button at 0 {
+		power {
 			wakeup-source;
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pwr_key>;
 		};

arch/arm/boot/dts/rk3188-radxarock.dts +3 -4

index 0b6924c..1da46d1 100644
@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3188.dtsi"
 
 / {

@@ -54,13 +55,11 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button at 0 {
+		power {
 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;

arch/arm/boot/dts/rk3288-evb.dtsi +3 -4

index 3ccd8f3..963365d 100644
@@ -38,6 +38,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"

@@ -98,16 +99,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button at 0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;

arch/arm/boot/dts/rk3288-firefly.dtsi +3 -4

index 5f06d8c..d6cf9ad 100644
@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/input/input.h>
 #include "rk3288.dtsi"
 
 / {

@@ -87,14 +88,12 @@
 
 	keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button at 0 {
+		power {
 			wakeup-source;
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pwr_key>;
 		};

arch/arm/boot/dts/rk3288-popmetal.dts +3 -5

index eb77276..720717b 100644
@@ -41,7 +41,7 @@
  */
 
 /dts-v1/;
-
+#include <dt-bindings/input/input.h>
 #include "rk3288.dtsi"
 
 / {

@@ -62,16 +62,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button at 0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;

arch/arm/boot/dts/rk3288-r89.dts +3 -4

index 510a1d0..4b8a8ad 100644
@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"

@@ -61,16 +62,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button at 0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;

Signature · 1 line

2.6.4

Heiko Stuebner

author maintainer

2016-03-31 20:54 UTC #6 lore raw

PATCH 4/5 ARM: dts: rockchip: drop unneeded properties from mipi node

In reply to Heiko Stuebner

The mipi controller node does contain an unused reg property as well as unnecessary #address-cells and #size-cells properties for subnodes not using addresses, so remove those to also make dtc happy.

Signed-off-by Heiko Stuebner <[email protected]>

---
 arch/arm/boot/dts/rk3288.dtsi | 4 ----
 1 file changed, 4 deletions(-)

arch/arm/boot/dts/rk3288.dtsi +0 -4

index ee4085d..9114c7b 100644
@@ -888,10 +888,6 @@
 		status = "disabled";
 
 		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
 			mipi_in: port {
 				#address-cells = <1>;
 				#size-cells = <0>;

Signature · 1 line

2.6.4

Heiko Stuebner

author maintainer

2016-03-31 20:54 UTC #7 lore raw

PATCH 5/5 ARM: dts: rockchip: add missing unitname to cpu_leakage efuse

In reply to Heiko Stuebner

The cpu_leakage efuse on rk3288 did get it right including the unitname but on both rk3066a and rk3188 it was missing, fix that.

Signed-off-by Heiko Stuebner <[email protected]>

---
 arch/arm/boot/dts/rk3066a.dtsi | 2 +-
 arch/arm/boot/dts/rk3188.dtsi  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

arch/arm/boot/dts/rk3066a.dtsi +1 -1

index c84a306..c0ba86c 100644
@@ -169,7 +169,7 @@
 		clocks = <&cru PCLK_EFUSE>;
 		clock-names = "pclk_efuse";
 
-		cpu_leakage: cpu_leakage {
+		cpu_leakage: cpu_leakage at 17 {
 			reg = <0x17 0x1>;
 		};
 	};

arch/arm/boot/dts/rk3188.dtsi +1 -1

index c44c318..31f81b2 100644
@@ -154,7 +154,7 @@
 		clocks = <&cru PCLK_EFUSE>;
 		clock-names = "pclk_efuse";
 
-		cpu_leakage: cpu_leakage {
+		cpu_leakage: cpu_leakage at 17 {
 			reg = <0x17 0x1>;
 		};
 	};

Signature · 1 line

2.6.4

Rob Herring

maintainer

2016-03-31 21:26 UTC #8 lore raw

cover ARM: dts: rockchip: small cleanups

In reply to Heiko Stuebner

Quoted 9 lines · Heiko Stuebner

Fix some missing unitnames on nodes having a reg property and drop unitnames on gpio-keys.
This explicitly leaves out the memory nodes, as it seems memory without unitname will keep being allowed, also to keep compatibility with bootloaders who may insert the actual amount of memory into those nodes. [0]

Quoted 8 lines

[0] http://www.spinics.net/lists/arm-kernel/msg494038.html
Heiko Stuebner (5):
ARM: dts: rockchip: fix rk3288 power-domain unit names
ARM: dts: rockchip: fix missing usbphy unit-names
ARM: dts: rockchip: clean up gpio-keys nodes
ARM: dts: rockchip: drop unneeded properties from mipi node
ARM: dts: rockchip: add missing unitname to cpu_leakage efuse

For the series:

Acked-by Rob Herring <[email protected]>

Heiko Stuebner

author maintainer Applied

2016-04-06 23:17 UTC #9 lore raw

cover ARM: dts: rockchip: small cleanups

In reply to Heiko Stuebner

Am Donnerstag, 31. M?rz 2016, 22:54:06 schrieb Heiko Stuebner:

Quoted 7 lines

Fix some missing unitnames on nodes having a reg property and drop unitnames on gpio-keys.
This explicitly leaves out the memory nodes, as it seems memory without unitname will keep being allowed, also to keep compatibility with bootloaders who may insert the actual amount of memory into those nodes. [0]

applied these with patch 2 fixed up to v2 for 4.7