How to patch a driver in Linux source tree
I'm working on a raspberry pi3 Yocto build from Qt's boot2qt project, it's running Yocto version 2.2.3, and Linux kernel 4.4.50. I need to back port some changes to a file in drivers/net/can/spi. I confused about where and how I set up the patch file.
I have a linux-raspberrypi_4.4.bbappend file. Do I put the patch file in that, and If so, how do I indicate the path to the file?
Thanks for the help and enlightenment,
Greg Wilson-Lindberg
SRC_URI = "<your kernel git path> file://your-patch-path"
Then place the patch in files subdirectory.
So your tree should look something like:
<your layer>/recipes-kernel/linux/
linux-raspberrypi_4.4.bbappend
files/
<your patch>
Instead of "files", it might be named "linux-raspberrypi".
Hope this helps,
Jeremy
Quoted 18 lines · Greg Wilson-Lindberg
I'm working on a raspberry pi3 Yocto build from Qt's boot2qt project, it's running Yocto version 2.2.3, and Linux kernel 4.4.50. I need to back port some changes to a file in
drivers/net/can/spi. I confused about where and how I set up the patch file.I have a linux-raspberrypi_4.4.bbappend file. Do I put the patch file in that, and If so, how do I indicate the path to the file?
Thanks for the help and enlightenment,
Greg Wilson-Lindberg
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 3 lines
Jeremy Thien Director of Engineering | Adtec Digital [email protected] | mobile: +1 (904) 910-1749
Hi Jeremy,
I understand most of what you've got here, thanks, but I'm confused on the SRC_URI="<your kernel git path>…". Where should I look for the kernel git directory? I'm running Yocto with a mirror directory and that contains git directories for all of the major pieces, but I don't see one for the kernel. The kernel source is in tmp/work-shared/raspberrypi3/lernel-source, but that is not a git directory.
Any pointers would be appreciated.
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
1750 W 214th Street | Torrance, CA 90501 | U.S.A.
T: +1 310 783 5075
F: +1 310 618 6902 | E: [email protected]<mailto:[email protected]>
www.sakuraus.com<http://www.sakuraus.com>
[cid:[email protected]]
[cid:[email protected]]
________________________________
Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Sakura Finetek USA, Inc. can arrange for proper delivery, and then please delete the message from your inbox. Thank you.
From: Jeremy Thien [mailto:[email protected]]
Sent: Friday, April 13, 2018 12:18 PM
To: Greg Wilson-Lindberg <[email protected]>
Cc: [email protected]
Subject: Re: [yocto] How to patch a driver in Linux source tree
SRC_URI = "<your kernel git path> file://your-patch-path<file:///\\your-patch-path>"
Then place the patch in files subdirectory.
So your tree should look something like:
<your layer>/recipes-kernel/linux/
linux-raspberrypi_4.4.bbappend
files/
<your patch>
Instead of "files", it might be named "linux-raspberrypi".
Hope this helps,
Jeremy
On Fri, Apr 13, 2018 at 2:41 PM Greg Wilson-Lindberg <[email protected]<mailto:[email protected]>> wrote:
I'm working on a raspberry pi3 Yocto build from Qt's boot2qt project, it's running Yocto version 2.2.3, and Linux kernel 4.4.50. I need to back port some changes to a file in drivers/net/can/spi. I confused about where and how I set up the patch file.
I have a linux-raspberrypi_4.4.bbappend file. Do I put the patch file in that, and If so, how do I indicate the path to the file?
Thanks for the help and enlightenment,
Greg Wilson-Lindberg
--
_______________________________________________
yocto mailing list
[email protected]<mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
--
Jeremy Thien
Director of Engineering | Adtec Digital [email protected]<mailto:[email protected]> | mobile: +1 (904) 910-1749
Quoted 3 lines · Greg Wilson-Lindberg
I'm working on a raspberry pi3 Yocto build from Qt's boot2qt project, it's running Yocto version 2.2.3, and Linux kernel 4.4.50. I need to back port some changes to a file in
drivers/net/can/spi. I confused about where and how I set up the patch file.I have a linux-raspberrypi_4.4.bbappend file. Do I put the patch file in that, and If so, how do I indicate the path to the file?
yes.
SRC_URI += "file://yourpatch.patch"
also add
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
then create a directory called linux-raspberrypi parallel to where the bbappend is and put the yourpatch.patch inside that directory.
Quoted 7 lines
Thanks for the help and enlightenment,
Greg Wilson-Lindberg
Thanks Khem,
That gave me what I needed.
Greg Wilson-Lindberg
Principal Firmware Engineer | Sakura Finetek USA, Inc.
Quoted 36 lines
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Friday, April 13, 2018 05:53 PM
To: Greg Wilson-Lindberg <[email protected]>; [email protected]
Subject: Re: [yocto] How to patch a driver in Linux source treeQuoted 7 lines · Greg Wilson-Lindberg
I'm working on a raspberry pi3 Yocto build from Qt's boot2qt project, it's running Yocto version 2.2.3, and Linux kernel 4.4.50. I need to back port some changes to a file in
drivers/net/can/spi. I confused about where and how I set up the patch file.I have a linux-raspberrypi_4.4.bbappend file. Do I put the patch file in that, and If so, how do I indicate the path to the file?
yes.
SRC_URI+= "file://yourpatch.patch"also add
FILESEXTRAPATHS_prepend:= "${THISDIR}/${PN}:"then create a directory called linux-raspberrypi parallel to where the bbappend is and put the yourpatch.patch inside that directory.
Quoted 7 lines
Thanks for the help and enlightenment,
Greg Wilson-Lindberg