configs: atmel: add sd card demo for sama5d2 xplained
RFC PATCH 1/1 configs: atmel: add sd card demo for sama5d2 xplained
This demo defconfig adds packages to have an equivalent root filesystem to the one generated by Yocto with atmel-xplained-demo-image.
---
Hi,
Since we will remove the at91 fork of the Buildroot repository. We would like to provide a turnkey solution as we do with Yocto. At the moment, it is only a basic set of packages.
My concern is we would like to provide a SD card demo but also a NAND demo. It means about 6 demo defconfigs to add. Is it an issue?
Regards
Ludovic
configs/atmel_sama5d2_xplained_mmc_demo_defconfig | 85 +++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 configs/atmel_sama5d2_xplained_mmc_demo_defconfig
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +85 -0
@@ -0,0 +1,85 @@ +BR2_arm=y +BR2_cortex_a5=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV4=y +BR2_ARM_INSTRUCTIONS_THUMB2=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y +BR2_PTHREAD_DEBUG=y +BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/atmel/sama5d2_xplained_mmc/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.2" +BR2_LINUX_KERNEL_DEFCONFIG="sama5" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_xplained at91-sama5d2_xplained_pda4 at91-sama5d2_xplained_pda7 at91-sama5d2_xplained_pda7b" +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_ALSA_UTILS=y +BR2_PACKAGE_ALSA_UTILS_ALSACONF=y +BR2_PACKAGE_ALSA_UTILS_APLAY=y +BR2_PACKAGE_FFMPEG=y +BR2_PACKAGE_FFMPEG_GPL=y +BR2_PACKAGE_FFMPEG_SWSCALE=y +BR2_PACKAGE_MPG123=y +BR2_PACKAGE_BZIP2=y +BR2_PACKAGE_GZIP=y +BR2_PACKAGE_UNZIP=y +BR2_PACKAGE_XZ=y +BR2_PACKAGE_ZIP=y +BR2_PACKAGE_GDB=y +BR2_PACKAGE_LMBENCH=y +BR2_PACKAGE_DOSFSTOOLS=y +BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y +BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y +BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y +BR2_PACKAGE_MMC_UTILS=y +BR2_PACKAGE_MTD=y +BR2_PACKAGE_WILC1000_FIRMWARE=y +BR2_PACKAGE_DEVMEM2=y +BR2_PACKAGE_EVTEST=y +BR2_PACKAGE_I2C_TOOLS=y +BR2_PACKAGE_SETSERIAL=y +BR2_PACKAGE_SPI_TOOLS=y +BR2_PACKAGE_USBUTILS=y +BR2_PACKAGE_LIBDRM=y +BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y +BR2_PACKAGE_DTC=y +BR2_PACKAGE_DTC_PROGRAMS=y +BR2_PACKAGE_BLUEZ_UTILS=y +BR2_PACKAGE_BRIDGE_UTILS=y +BR2_PACKAGE_CAN_UTILS=y +BR2_PACKAGE_DROPBEAR=y +BR2_PACKAGE_ETHTOOL=y +BR2_PACKAGE_IPERF=y +BR2_PACKAGE_IPROUTE2=y +BR2_PACKAGE_IPTABLES=y +BR2_PACKAGE_IW=y +BR2_PACKAGE_LRZSZ=y +BR2_PACKAGE_MII_DIAG=y +BR2_PACKAGE_OPENSSH=y +BR2_PACKAGE_WGET=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_BASH=y +BR2_PACKAGE_HTOP=y +BR2_PACKAGE_VIM=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_AT91BOOTSTRAP3=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.4" +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.2" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
Signature · 1 line
2.5.0
RFC PATCH 1/1 configs: atmel: add sd card demo for sama5d2 xplained
Quoted 4 lines · Ludovic Desroches
This demo defconfig adds packages to have an equivalent root filesystem to the one generated by Yocto with atmel-xplained-demo-image.
---
Quoted 8 lines
Hi,
Since we will remove the at91 fork of the Buildroot repository. We would like to provide a turnkey solution as we do with Yocto. At the moment, it is only a basic set of packages.
My concern is we would like to provide a SD card demo but also a NAND demo. It means about 6 demo defconfigs to add. Is it an issue?
No, I don't think it's an issue.
It may be a good occasion to improve support for split defconfigs. Once we see
a bit the commonalities.
configs/atmel_sama5d2_xplained_mmc_demo_defconfig
Quoted 10 lines
Regards
Ludovic
configs/atmel_sama5d2_xplained_mmc_demo_defconfig | 85 +++++++++++++++++++++++ 1 file changed, 85 insertions(+)create mode 100644 configs/atmel_sama5d2_xplained_mmc_demo_defconfig
configs/atmel_sama5d2_xplained_mmc_demo_defconfig +0
-0
I think "demo" is not a great name, if we want more different demos later.
Maybe "dev" because it's mostly development tools that are added?
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 6
Quoted 11 lines
new file mode 100644
index 0000000..792b8ccconfigs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +6
-0@@ -0,0 +1,85 @@ +BR2_arm=y +BR2_cortex_a5=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV4=y +BR2_ARM_INSTRUCTIONS_THUMB2=y
Can you add some comments in the defconfig file like we do for most other
defconfigs?
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 8
Quoted 2 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +2
-0+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
Like here, explain why wchar is needed.
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 9
Quoted 1 line
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +1
-0+BR2_PTHREAD_DEBUG=y
And definitely this one needs explanation.
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 16
Quoted 7 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +7
-0+BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/atmel/sama5d2_xplained_mmc/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.2"
It's github, you can use an URL rather than a git clone.
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 19
Quoted 3 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +3
-0+BR2_LINUX_KERNEL_DEFCONFIG="sama5" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_xplained at91-sama5d2_xplained_pda4 at91-sama5d2_xplained_pda7 at91-sama5d2_xplained_pda7b"
For the packages it would also be nice to order them into logical sections,
with comments.
Quoted 12 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +12
-0+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_ALSA_UTILS=y +BR2_PACKAGE_ALSA_UTILS_ALSACONF=y +BR2_PACKAGE_ALSA_UTILS_APLAY=y +BR2_PACKAGE_FFMPEG=y +BR2_PACKAGE_FFMPEG_GPL=y +BR2_PACKAGE_FFMPEG_SWSCALE=y +BR2_PACKAGE_MPG123=y +BR2_PACKAGE_BZIP2=y +BR2_PACKAGE_GZIP=y +BR2_PACKAGE_UNZIP=y +BR2_PACKAGE_XZ=y
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 41
Quoted 10 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +10
-0+BR2_PACKAGE_ZIP=y +BR2_PACKAGE_GDB=y +BR2_PACKAGE_LMBENCH=y +BR2_PACKAGE_DOSFSTOOLS=y +BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y +BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y +BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y +BR2_PACKAGE_MMC_UTILS=y +BR2_PACKAGE_MTD=y +BR2_PACKAGE_WILC1000_FIRMWARE=y
Is the wifi always populated? If yes, I think it would make sense to include
the wifi userspace in the basic defconfig. IMHO the basic defconfig should include everything to get the hardware running. In fact, I think that also the GPU libs should be included in the basic defconfig.
Regards,
Arnout
Quoted 45 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +44
-0+BR2_PACKAGE_DEVMEM2=y +BR2_PACKAGE_EVTEST=y +BR2_PACKAGE_I2C_TOOLS=y +BR2_PACKAGE_SETSERIAL=y +BR2_PACKAGE_SPI_TOOLS=y +BR2_PACKAGE_USBUTILS=y +BR2_PACKAGE_LIBDRM=y +BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y +BR2_PACKAGE_DTC=y +BR2_PACKAGE_DTC_PROGRAMS=y +BR2_PACKAGE_BLUEZ_UTILS=y +BR2_PACKAGE_BRIDGE_UTILS=y +BR2_PACKAGE_CAN_UTILS=y +BR2_PACKAGE_DROPBEAR=y +BR2_PACKAGE_ETHTOOL=y +BR2_PACKAGE_IPERF=y +BR2_PACKAGE_IPROUTE2=y +BR2_PACKAGE_IPTABLES=y +BR2_PACKAGE_IW=y +BR2_PACKAGE_LRZSZ=y +BR2_PACKAGE_MII_DIAG=y +BR2_PACKAGE_OPENSSH=y +BR2_PACKAGE_WGET=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_BASH=y +BR2_PACKAGE_HTOP=y +BR2_PACKAGE_VIM=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_AT91BOOTSTRAP3=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.4" +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.2" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
RFC PATCH 1/1 configs: atmel: add sd card demo for sama5d2 xplained
Hi,
Quoted 11 lines · Arnout Vandecappelle
Quoted 10 lines · Ludovic Desroches
This demo defconfig adds packages to have an equivalent root filesystem to the one generated by Yocto with atmel-xplained-demo-image.
---Hi,
Since we will remove the at91 fork of the Buildroot repository. We would like to provide a turnkey solution as we do with Yocto. At the moment, it is only a basic set of packages.
Quoted 8 lines
Quoted 2 lines
My concern is we would like to provide a SD card demo but also a NAND demo. It means about 6 demo defconfigs to add. Is it an issue?
No, I don't think it's an issue.
It may be a good occasion to improve support for split defconfigs. Once we
see a bit the commonalities.
The differences between these defconfigs will be the Neon/VFP for the toolchain and the defconfig of at91bootstrap and u-boot.
Quoted 5 lines
Quoted 5 lines
Regards
Ludovic
Quoted 9 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig
Quoted 5 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig | 85 +++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 configs/atmel_sama5d2_xplained_mmc_demo_defconfigconfigs/atmel_sama5d2_xplained_mmc_demo_defconfig +0
-0I think "demo" is not a great name, if we want more different demos later.
Maybe "dev" because it's mostly development tools that are added?
You might be right. Maybe in the future we will propose a true demo as we do with Yocto, a basic image and one with demo applications.
Quoted 6 lines
Quoted 6 lines
new file mode 100644
index 0000000..792b8ccconfigs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +1
-0@@ -0,0 +1,85 @@ +BR2_arm=y
Quoted 8 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 6
Quoted 5 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +5
-0+BR2_cortex_a5=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV4=y +BR2_ARM_INSTRUCTIONS_THUMB2=yCan you add some comments in the defconfig file like we do for most other
defconfigs?
Ok, I thought using savedefconfig was the best way.
Quoted 5 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 8
Quoted 3 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +2
-0+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +BR2_TOOLCHAIN_BUILDROOT_WCHAR=yLike here, explain why wchar is needed.
Requested for some packages.
Quoted 5 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 9
Quoted 2 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +1
-0+BR2_PTHREAD_DEBUG=yAnd definitely this one needs explanation.
Needed for gdb/gdb server
Quoted 9 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 16
Quoted 7 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +7
-0+BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/atmel/sama5d2_xplained_mmc/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.2"It's github, you can use an URL rather than a git clone.
Probably better, so I may update other atmel defconfigs and at91bootstrap / u-boot.
Quoted 27 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 19
Quoted 4 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +3
-0+BR2_LINUX_KERNEL_DEFCONFIG="sama5" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_xplained at91-sama5d2_xplained_pda4 at91-sama5d2_xplained_pda7 at91-sama5d2_xplained_pda7b"For the packages it would also be nice to order them into logical sections,
with comments.Quoted 19 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +19
-0+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_ALSA_UTILS=y +BR2_PACKAGE_ALSA_UTILS_ALSACONF=y +BR2_PACKAGE_ALSA_UTILS_APLAY=y +BR2_PACKAGE_FFMPEG=y +BR2_PACKAGE_FFMPEG_GPL=y +BR2_PACKAGE_FFMPEG_SWSCALE=y +BR2_PACKAGE_MPG123=y +BR2_PACKAGE_BZIP2=y +BR2_PACKAGE_GZIP=y +BR2_PACKAGE_UNZIP=y +BR2_PACKAGE_XZ=y +BR2_PACKAGE_ZIP=y +BR2_PACKAGE_GDB=y +BR2_PACKAGE_LMBENCH=y +BR2_PACKAGE_DOSFSTOOLS=y +BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y +BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y +BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
Quoted 8 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig line 41
Quoted 3 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +3
-0+BR2_PACKAGE_MMC_UTILS=y +BR2_PACKAGE_MTD=y +BR2_PACKAGE_WILC1000_FIRMWARE=yIs the wifi always populated? If yes, I think it would make sense to
include the wifi userspace in the basic defconfig. IMHO the basic defconfig should include everything to get the hardware running. In fact, I think that also the GPU libs should be included in the basic defconfig.
We provide the kernel modules for WiFi but the WiFi device is a SDIO module.
Regards
Ludovic
Quoted 60 lines
Regards,
ArnoutQuoted 45 lines
configs/atmel_sama5d2_xplained_mmc_demo_defconfig new file +44
-0+BR2_PACKAGE_DEVMEM2=y +BR2_PACKAGE_EVTEST=y +BR2_PACKAGE_I2C_TOOLS=y +BR2_PACKAGE_SETSERIAL=y +BR2_PACKAGE_SPI_TOOLS=y +BR2_PACKAGE_USBUTILS=y +BR2_PACKAGE_LIBDRM=y +BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y +BR2_PACKAGE_DTC=y +BR2_PACKAGE_DTC_PROGRAMS=y +BR2_PACKAGE_BLUEZ_UTILS=y +BR2_PACKAGE_BRIDGE_UTILS=y +BR2_PACKAGE_CAN_UTILS=y +BR2_PACKAGE_DROPBEAR=y +BR2_PACKAGE_ETHTOOL=y +BR2_PACKAGE_IPERF=y +BR2_PACKAGE_IPROUTE2=y +BR2_PACKAGE_IPTABLES=y +BR2_PACKAGE_IW=y +BR2_PACKAGE_LRZSZ=y +BR2_PACKAGE_MII_DIAG=y +BR2_PACKAGE_OPENSSH=y +BR2_PACKAGE_WGET=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_BASH=y +BR2_PACKAGE_HTOP=y +BR2_PACKAGE_VIM=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_AT91BOOTSTRAP3=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.4" +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d2_xplainedsd_uboot" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.2" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_xplained_mmc" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=ySignature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF