odroid: Update README with correct firmware link and XU4 support

PATCH New Shawn Guo 4 participants 4 messages Apr 8, 2016 – Apr 14, 2016

Share & tools

Shawn Guo

author

2016-04-08 03:06 UTC #0 lore raw

PATCH 1/1 odroid: Update README with correct firmware link and XU4 support

The firmware from link [1] only works with U-Boot image that is no bigger than 328KiB. Using it with the default mainline U-Boot today which is already around 500KiB is just not working. Correct the link to be hardkernel_1mb_uboot one [2], so that users can get mainline U-Boot work out of box.

While at it, the README is updated to include XU4 support, like DTB file name.

[1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
[2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot

Signed-off-by Shawn Guo <[email protected]>

---
 doc/README.odroid | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

doc/README.odroid +6 -4

index ef243d1bde36..c088ec4cb08f 100644
@@ -1,11 +1,11 @@
- U-Boot for Odroid X2/U3/XU3
+ U-Boot for Odroid X2/U3/XU3/XU4
 ========================
 
 1. Summary
 ==========
 This is a quick instruction for setup Odroid boards.
 Board config: odroid_config for X2/U3
-Board config: odroid-xu3_config for XU3
+Board config: odroid-xu3_config for XU3/XU4
 
 2. Supported devices
 ====================

@@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
 - Odroid X2
 with CPU Exynos 4412 rev 2.0 and 2GB of RAM
 - Odroid XU3
+- Odroid XU4
 with CPU Exynos5422 and 2GB of RAM
 
 3. Boot sequence

@@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
 or here:
 http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
 
-<< XU3 >>
+<< XU3/XU4 >>
 It can be downloaded from:
-https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
+https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
 
 
 4. Boot media layout

@@ -120,6 +121,7 @@ Supported fdt files are:
 - exynos4412-odroidx2.dtb
 - exynos4412-odroidu3.dtb
 - exynos5422-odroidxu3.dtb
+- exynos5422-odroidxu4.dtb
 
 Supported kernel files are:
 - Image.itb

Signature · 1 line

1.9.1

Przemyslaw Marczak

2016-04-08 06:54 UTC #1 lore raw

PATCH 1/1 odroid: Update README with correct firmware link and XU4 support

Hello Shawn,

Quoted 57 lines · Shawn Guo

The firmware from link [1] only works with U-Boot image that is no bigger than 328KiB. Using it with the default mainline U-Boot today which is already around 500KiB is just not working. Correct the link to be hardkernel_1mb_uboot one [2], so that users can get mainline U-Boot work out of box.
While at it, the README is updated to include XU4 support, like DTB file name.
[1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
[2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
Signed-off-by Shawn Guo <[email protected]>
---
  doc/README.odroid | 10 ++++++----
  1 file changed, 6 insertions(+), 4 deletions(-)
doc/README.odroid +5 -4
index ef243d1bde36..c088ec4cb08f 100644
@@ -1,11 +1,11 @@
- U-Boot for Odroid X2/U3/XU3
+ U-Boot for Odroid X2/U3/XU3/XU4
  ========================
 
  1. Summary
  ==========
  This is a quick instruction for setup Odroid boards.
  Board config: odroid_config for X2/U3
-Board config: odroid-xu3_config for XU3
+Board config: odroid-xu3_config for XU3/XU4
 
  2. Supported devices
  ====================
@@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
  - Odroid X2
  with CPU Exynos 4412 rev 2.0 and 2GB of RAM
  - Odroid XU3
+- Odroid XU4
  with CPU Exynos5422 and 2GB of RAM
 
  3. Boot sequence
@@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
  or here:
  http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
 
-<< XU3 >>
+<< XU3/XU4 >>
  It can be downloaded from:
-https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
+https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
 
 
  4. Boot media layout

doc/README.odroid Supported fdt files are: · line 127

Quoted 7 lines

doc/README.odroid +1 -0

@@ -120,6 +121,7 @@ Supported fdt files are:
  - exynos4412-odroidx2.dtb
  - exynos4412-odroidu3.dtb
  - exynos5422-odroidxu3.dtb
+- exynos5422-odroidxu4.dtb
 
  Supported kernel files are:
  - Image.itb

Thank you for correcting this.

Acked-by Przemyslaw Marczak <[email protected]>

Best regards,

Signature · 4 lines

Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com

Anand Moon

2016-04-08 14:04 UTC #2 lore raw

PATCH 1/1 odroid: Update README with correct firmware link and XU4 support

In reply to Shawn Guo

Hi Shawn,

Quoted 64 lines · Shawn Guo

While at it, the README is updated to include XU4 support, like DTB file name.

[1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
[2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot

Signed-off-by Shawn Guo <[email protected]>

---
 doc/README.odroid | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

doc/README.odroid +6 -5

index ef243d1bde36..c088ec4cb08f 100644
@@ -1,11 +1,11 @@
- U-Boot for Odroid X2/U3/XU3
+ U-Boot for Odroid X2/U3/XU3/XU4
 ========================
 
 1. Summary
 ==========
 This is a quick instruction for setup Odroid boards.
 Board config: odroid_config for X2/U3
-Board config: odroid-xu3_config for XU3
+Board config: odroid-xu3_config for XU3/XU4
 
 2. Supported devices
 ====================

@@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
 - Odroid X2
 with CPU Exynos 4412 rev 2.0 and 2GB of RAM
 - Odroid XU3
+- Odroid XU4
 with CPU Exynos5422 and 2GB of RAM
 
 3. Boot sequence

@@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
 or here:
 http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
 
-<< XU3 >>
+<< XU3/XU4 >>
 It can be downloaded from:
-https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
+https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
 
 
 4. Boot media layout

@@ -120,6 +121,7 @@ Supported fdt files are:
 - exynos4412-odroidx2.dtb
 - exynos4412-odroidu3.dtb
 - exynos5422-odroidxu3.dtb
+- exynos5422-odroidxu4.dtb
 
 Supported kernel files are:
 - Image.itb
--

Quoted 2 lines

1.9.1

Reviewed-by Anand Moon <[email protected]>

Best Regards.
-Anand Moon

Minkyu Kang

2016-04-14 10:41 UTC #3 lore raw

PATCH 1/1 odroid: Update README with correct firmware link and XU4 support

Quoted 72 lines · Anand Moon

Hi Shawn,
Quoted 64 lines · Shawn Guo
The firmware from link [1] only works with U-Boot image that is no bigger than 328KiB. Using it with the default mainline U-Boot today which is already around 500KiB is just not working. Correct the link to be hardkernel_1mb_uboot one [2], so that users can get mainline U-Boot work out of box.
While at it, the README is updated to include XU4 support, like DTB file name.
[1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
[2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
Signed-off-by Shawn Guo <[email protected]>
---
 doc/README.odroid | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
doc/README.odroid +6 -5
index ef243d1bde36..c088ec4cb08f 100644
@@ -1,11 +1,11 @@
- U-Boot for Odroid X2/U3/XU3
+ U-Boot for Odroid X2/U3/XU3/XU4
 ========================
 
 1. Summary
 ==========
 This is a quick instruction for setup Odroid boards.
 Board config: odroid_config for X2/U3
-Board config: odroid-xu3_config for XU3
+Board config: odroid-xu3_config for XU3/XU4
 
 2. Supported devices
 ====================
@@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
 - Odroid X2
 with CPU Exynos 4412 rev 2.0 and 2GB of RAM
 - Odroid XU3
+- Odroid XU4
 with CPU Exynos5422 and 2GB of RAM
 
 3. Boot sequence
@@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
 or here:
 http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
 
-<< XU3 >>
+<< XU3/XU4 >>
 It can be downloaded from:
-https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
+https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
 
 
 4. Boot media layout
@@ -120,6 +121,7 @@ Supported fdt files are:
 - exynos4412-odroidx2.dtb
 - exynos4412-odroidu3.dtb
 - exynos5422-odroidxu3.dtb
+- exynos5422-odroidxu4.dtb
 
 Supported kernel files are:
 - Image.itb
--
Quoted 2 lines
1.9.1
Reviewed-by Anand Moon <[email protected]>

Quoted 4 lines

Best Regards.
-Anand Moon

Applied to u-boot-samsung.

Thanks,
Minkyu Kang.