Skip to contentSkip to conversation

usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

PATCH Superseded Semen Protsenko 3 participants 5 messages Apr 7, 2016 – Apr 8, 2016

Subsystems (7)
USB Arm Samsung Exynos Tegra architecture support Arm/Zynq architecture +3 more subsystems

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Semen Protsenko

author
#0 lore raw

PATCH v2 1/8 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

From: Sam Protsenko <[email protected]>

The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig).

Signed-off-by Sam Protsenko <[email protected]>

---
Changes for v2:
- set minimal VBUS_DRAW value to 2 mA in range in Kconfig
- set minimal VBUS_DRAW values to 2 mA for all boards (even for ones that are using 0 mA)

 drivers/usb/gadget/Kconfig                | 21 +++++++++++++++++++++
 include/configs/am335x_evm.h              |  1 -
 include/configs/am43xx_evm.h              |  5 ++++-
 include/configs/baltos.h                  |  1 -
 include/configs/bav335x.h                 |  1 -
 include/configs/bcm28155_ap.h             |  1 -
 include/configs/cgtqmx6eval.h             |  1 -
 include/configs/colibri_vf.h              |  1 -
 include/configs/corvus.h                  |  1 -
 include/configs/dra7xx_evm.h              |  1 -
 include/configs/exynos4-common.h          |  1 -
 include/configs/gw_ventana.h              |  1 -
 include/configs/kc1.h                     |  1 -
 include/configs/mx6sabre_common.h         |  1 -
 include/configs/mx7dsabresd.h             |  1 -
 include/configs/nitrogen6x.h              |  1 -
 include/configs/odroid_xu3.h              |  1 -
 include/configs/omap3_beagle.h            |  1 -
 include/configs/omap3_logic.h             |  1 -
 include/configs/omap5_uevm.h              |  1 -
 include/configs/pengwyn.h                 |  1 -
 include/configs/s5p_goni.h                |  1 -
 include/configs/siemens-am33x-common.h    |  1 -
 include/configs/smartweb.h                |  1 -
 include/configs/sniper.h                  |  1 -
 include/configs/socfpga_common.h          |  1 -
 include/configs/sunxi-common.h            |  1 -
 include/configs/taurus.h                  |  1 -
 include/configs/tbs2910.h                 |  1 -
 include/configs/tegra-common-usb-gadget.h |  1 -
 include/configs/warp.h                    |  1 -
 include/configs/xilinx_zynqmp.h           |  1 -
 include/configs/zynq-common.h             |  1 -
 33 files changed, 25 insertions(+), 32 deletions(-)
drivers/usb/gadget/Kconfig +21 -0
index f4698f4..cfd8ce8 100644
@@ -33,3 +33,24 @@ menuconfig USB_GADGET
 	   a USB peripheral device.  Configure one hardware driver for your
 	   peripheral/device side bus controller, and a "gadget driver" for
 	   your peripheral protocol.
+
+if USB_GADGET
+
+config USB_GADGET_VBUS_DRAW
+	int "Maximum VBUS Power usage (2-500 mA)"
+	range 2 500
+	default 2
+	help
+	   Some devices need to draw power from USB when they are
+	   configured, perhaps to operate circuitry or to recharge
+	   batteries.  This is in addition to any local power supply,
+	   such as an AC adapter or batteries.
+
+	   Enter the maximum power your device draws through USB, in
+	   milliAmperes.  The permitted range of values is 2 - 500 mA;
+	   0 mA would be legal, but can make some hosts misbehave.
+
+	   This value will be used except for system-specific gadget
+	   drivers that have more specific information.
+
+endif # USB_GADGET
include/configs/am335x_evm.h +0 -1
index 29b693a..8d68d60 100644
@@ -290,7 +290,6 @@
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
include/configs/am43xx_evm.h +4 -1
index fd3f6a7..0dd9c7a7 100644
@@ -122,6 +122,10 @@
 #endif
 
 /* USB GADGET */
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT)
+#undef CONFIG_USB_GADGET_VBUS_DRAW
+#endif
+
 #if !defined(CONFIG_SPL_BUILD) || \
 	(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT))
 #define CONFIG_USB_DWC3_PHY_OMAP

@@ -130,7 +134,6 @@
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
include/configs/baltos.h +0 -1
index bfe3fa3..529cf1c 100644
@@ -276,7 +276,6 @@
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
include/configs/bav335x.h +0 -1
index 6c860a6..82bf92a 100644
@@ -441,7 +441,6 @@ DEFAULT_LINUX_BOOT_ENV \
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
include/configs/bcm28155_ap.h +0 -1
index cf25bde..387895b 100644
@@ -139,7 +139,6 @@
 #define CONFIG_FASTBOOT_BUF_SIZE	(CONFIG_SYS_SDRAM_SIZE - SZ_1M)
 #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DOWNLOAD
include/configs/cgtqmx6eval.h +0 -1
index 63e3b94..3f3b69d 100644
@@ -93,7 +93,6 @@
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
include/configs/colibri_vf.h +0 -1
index 7f57a54..63dbe12 100644
@@ -235,7 +235,6 @@
 /* USB Client Support */
 #define CONFIG_CI_UDC
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW      2
 #define CONFIG_TRDX_VID                  0x1B67
 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
include/configs/corvus.h +0 -1
index fcf2bd6..b8c441e 100644
@@ -125,7 +125,6 @@
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
include/configs/dra7xx_evm.h +0 -1
index 7734e8d..e9facae 100644
@@ -233,7 +233,6 @@
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022
include/configs/exynos4-common.h +0 -1
index 008d24c..c8e5397 100644
@@ -53,7 +53,6 @@
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
include/configs/gw_ventana.h +0 -1
index 793b3fb..62f3468 100644
@@ -196,7 +196,6 @@
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 
 /* Netchip IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
include/configs/kc1.h +0 -1
index ee7d9ce..d8aa182 100644
@@ -185,7 +185,6 @@
 #define CONFIG_USB_MUSB_OMAP2PLUS
 
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 
 /*
  * Download
include/configs/mx6sabre_common.h +0 -1
index ceea74e..299f11b 100644
@@ -241,7 +241,6 @@
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
include/configs/mx7dsabresd.h +0 -1
index 5d897c2..506ac32 100644
@@ -256,7 +256,6 @@
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
include/configs/nitrogen6x.h +0 -1
index 3604e44..a50829e 100644
@@ -333,7 +333,6 @@
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* Netchip IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
include/configs/odroid_xu3.h +0 -1
index 01d08dc..e4986b0 100644
@@ -54,7 +54,6 @@
 
 /* USB gadget */
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* Downloader */
 #define CONFIG_G_DNL_VENDOR_NUM		0x04E8
include/configs/omap3_beagle.h +0 -1
index 2112d9f..17d8a86 100644
@@ -66,7 +66,6 @@
 #define CONFIG_TWL4030_USB		1
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM	0xd022
include/configs/omap3_logic.h +0 -1
index 304e1ce..7e802e9 100644
@@ -85,7 +85,6 @@
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM	0xd022
include/configs/omap5_uevm.h +0 -1
index a5cfa0c..09beb74 100644
@@ -106,7 +106,6 @@
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
include/configs/pengwyn.h +0 -1
index 1a670cb..ec3fcba 100644
@@ -200,7 +200,6 @@
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
include/configs/s5p_goni.h +0 -1
index 07a5134..919c60e 100644
@@ -273,7 +273,6 @@
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
include/configs/siemens-am33x-common.h +0 -1
index df2a514..df4e734 100644
@@ -225,7 +225,6 @@
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #undef CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 
 #define CONFIG_AM335X_USB0
include/configs/smartweb.h +0 -1
index db820ba..0586aec 100644
@@ -176,7 +176,6 @@
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_1M
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
include/configs/sniper.h +0 -1
index 18a379d..12090a3 100644
@@ -202,7 +202,6 @@
 #define CONFIG_TWL4030_USB
 
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 
 /*
  * Download
include/configs/socfpga_common.h +0 -1
index 07519c1..a42e6d7 100644
@@ -254,7 +254,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* USB Composite download gadget - g_dnl */
 #define CONFIG_USB_GADGET_DOWNLOAD
include/configs/sunxi-common.h +0 -1
index 8f11eb9..b5d05cd 100644
@@ -343,7 +343,6 @@ extern int soft_i2c_gpio_scl;
 
 #ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_FUNCTION_DFU
include/configs/taurus.h +0 -1
index 5b190f6..0b04b3a 100644
@@ -140,7 +140,6 @@
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
include/configs/tbs2910.h +0 -1
index 1b5046a..715994c 100644
@@ -132,7 +132,6 @@
 #define CONFIG_USBD_HS
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
include/configs/tegra-common-usb-gadget.h +0 -1
index c3a0151..ec034a1 100644
@@ -10,7 +10,6 @@
 
 #ifndef CONFIG_SPL_BUILD
 /* USB gadget mode support*/
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 #define CONFIG_CI_UDC
 #define CONFIG_CI_UDC_HAS_HOSTPC
 #define CONFIG_USB_GADGET_DUALSPEED
include/configs/warp.h +0 -1
index cb93629..80c4e38 100644
@@ -81,7 +81,6 @@
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
include/configs/xilinx_zynqmp.h +0 -1
index 8cea610..3a96483 100644
@@ -130,7 +130,6 @@
 
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT	300
include/configs/zynq-common.h +0 -1
index d8e3fa4..941372d 100644
@@ -107,7 +107,6 @@
 # define DFU_DEFAULT_POLL_TIMEOUT	300
 # define CONFIG_USB_FUNCTION_DFU
 # define CONFIG_DFU_RAM
-# define CONFIG_USB_GADGET_VBUS_DRAW	2
 # define CONFIG_G_DNL_VENDOR_NUM	0x03FD
 # define CONFIG_G_DNL_PRODUCT_NUM	0x0300
 # define CONFIG_G_DNL_MANUFACTURER	"Xilinx"
Signature · 1 line
2.8.0.rc3
#1 lore raw

PATCH v2 1/8 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

Quoted 8 lines · Semen Protsenko

From: Sam Protsenko <[email protected]>

The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig).

Acked-by Stephen Warren <[email protected]>

(although I only got patch 1/8 and not patches 2-8 this time around)

author
#2 lore raw

PATCH v2 1/8 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

Quoted 8 lines · Stephen Warren
Quoted 7 lines · Semen Protsenko

From: Sam Protsenko <[email protected]>

The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig.

Quoted 8 lines
Quoted 2 lines

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig).

Acked-by Stephen Warren <[email protected]>

(although I only got patch 1/8 and not patches 2-8 this time around)

Thanks. I will resend others too, soon enough. Just continue working on other patch v2 right now.

#3 lore raw

PATCH v2 1/8 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

Quoted 13 lines · Sam Protsenko
Quoted 12 lines · Stephen Warren
Quoted 9 lines · Semen Protsenko

From: Sam Protsenko <[email protected]>

The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig).

Quoted 8 lines
Quoted 4 lines
Acked-by Stephen Warren <[email protected]>

(although I only got patch 1/8 and not patches 2-8 this time around)

Thanks. I will resend others too, soon enough. Just continue working on other patch v2 right now.

OK, send the whole series please

Signature · 2 lines
Best regards,
Marek Vasut
author
#4 lore raw

PATCH v2 1/8 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

Quoted 16 lines · Marek Vasut
Quoted 15 lines · Sam Protsenko
Quoted 14 lines · Stephen Warren
Quoted 9 lines · Semen Protsenko

From: Sam Protsenko <[email protected]>

The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig).

Acked-by Stephen Warren <[email protected]>
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

(although I only got patch 1/8 and not patches 2-8 this time around)

Thanks. I will resend others too, soon enough. Just continue working on other patch v2 right now.

OK, send the whole series please

Sure. I'll send v3, as all patches were rebased on top of current master.

Quoted 3 lines

--
Best regards,
Marek Vasut