Skip to contentSkip to conversation

ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus

PATCH New Masahiro Yamada 2 participants 2 messages Apr 25, 2016

Subsystems (2)
Arm (32-bit) Arm/Zynq architecture
lore
Share & tools
lore

Masahiro Yamada

author
#0 lore raw

PATCH 1/1 ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus

Commit 9f56917ab88a ("dm: core: make simple-bus compatible to simple-mfd") made possible to import the following commit:

Linux commit: bc5ba9b98435bf76d92e0954da1784695aa449f1

The SLCR (System-Level Control Registers) block is an MFD (Multi Function Device) rather than a bus.

"simple-mfd" seems a more suitable compatible string than "simple-bus".

Signed-off-by Masahiro Yamada <[email protected]>
Signed-off-by Michal Simek <[email protected]>

---

 arch/arm/dts/zynq-7000.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/zynq-7000.dtsi +1 -1
index a327557..b618a3f 100644
@@ -251,7 +251,7 @@
 		slcr: slcr at f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc at 100 {
Signature · 1 line
1.9.1
Applied
#1 lore raw

PATCH 1/1 ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus

Quoted 23 lines · Masahiro Yamada

Commit 9f56917ab88a ("dm: core: make simple-bus compatible to simple-mfd") made possible to import the following commit:

Linux commit: bc5ba9b98435bf76d92e0954da1784695aa449f1

The SLCR (System-Level Control Registers) block is an MFD (Multi Function Device) rather than a bus.

"simple-mfd" seems a more suitable compatible string than "simple-bus".

Signed-off-by Masahiro Yamada <[email protected]>
Signed-off-by Michal Simek <[email protected]>

---

 arch/arm/dts/zynq-7000.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/zynq-7000.dtsi +0 -0
index a327557..b618a3f 100644

arch/arm/dts/zynq-7000.dtsi line 257

Quoted 8 lines
arch/arm/dts/zynq-7000.dtsi +1 -1
@@ -251,7 +251,7 @@
 		slcr: slcr at f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc at 100 {

Applied.

Thanks,
Michal