ARM: dts: tango4: Update device tree
PATCH 1/1 ARM: dts: tango4: Update device tree
From: Marc Gonzalez <[email protected]>
Match device tree with latest clock driver.
Update cpus node for cpufreq.
Import watchdog node.
Signed-off-by Marc Gonzalez <[email protected]>
---
This patch applies on top of the thermal DT changes. [PATCH v8 2/2] ARM: dts: tango4: Initial thermal support
Acked-by Eduardo Valentin <[email protected]>
--- arch/arm/boot/dts/tango4-common.dtsi | 16 ++++++++++++---- arch/arm/boot/dts/tango4-smp8758.dtsi | 5 ++++- arch/arm/boot/dts/tango4-vantage-1172.dts | 1 - 3 files changed, 16 insertions(+), 6 deletions(-)
arch/arm/boot/dts/tango4-common.dtsi +12 -4
@@ -3,11 +3,13 @@ * https://github.com/mansr/linux-tangox */ -#define CPU_CLK 0 -#define SYS_CLK 1 - #include <dt-bindings/interrupt-controller/arm-gic.h> +#define CPU_CLK 0 +#define SYS_CLK 1 +#define USB_CLK 2 +#define SDIO_CLK 3 + / { interrupt-parent = <&gic>; #address-cells = <1>;
@@ -70,7 +72,7 @@ clkgen: clkgen at 10000 { compatible = "sigma,tango4-clkgen"; - reg = <0x10000 0x40>; + reg = <0x10000 0x100>; clocks = <&xtal>; #clock-cells = <1>; };
@@ -89,6 +91,12 @@ reg-shift = <2>; }; + watchdog at 1fd00 { + compatible = "sigma,smp8759-wdt"; + reg = <0x1fd00 8>; + clocks = <&xtal>; + }; + eth0: ethernet at 26000 { compatible = "sigma,smp8734-ethernet"; reg = <0x26000 0x800>;
arch/arm/boot/dts/tango4-smp8758.dtsi +4 -1
@@ -1,4 +1,4 @@ -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "tango4-common.dtsi" / { cpus {
@@ -11,6 +11,9 @@ next-level-cache = <&l2cc>; device_type = "cpu"; reg = <0>; + clocks = <&clkgen CPU_CLK>; + clock-latency = <1>; + operating-points = <1215000 0 607500 0 405000 0 243000 0 135000 0>; }; cpu1: cpu at 1 {
arch/arm/boot/dts/tango4-vantage-1172.dts +0 -1
@@ -1,7 +1,6 @@ /dts-v1/; #include "tango4-smp8758.dtsi" -#include "tango4-common.dtsi" / { model = "Sigma Designs SMP8758 Vantage-1172 Rev E1";
Signature · 1 line
2.8.1