ARM: tegra: import latest Jetson TK1 spreadsheet
PATCH 1/1 ARM: tegra: import latest Jetson TK1 spreadsheet
From: Stephen Warren <[email protected]>
This imports v11 of "Jetson TK1 Development Platform Pin Mux" from
https://developer.nvidia.com/embedded/downloads.
The new version defines the mux option for the MIPI pad ctrl selection. The OWR pin no longer has an entry in the configuration table because the only mux option it support is OWR, that feature isn't supported, and hence can't conflict with any other pin. This pin can only usefully be used as a GPIO.
---
Note that the cleanup series I sent on Tuesday accidentally depends on this being applied first. I'd expect this to have higher priority than the cleanup series and be applied earlier anyway.
board/nvidia/jetson-tk1/jetson-tk1.c | 3 +++ board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h | 12 +++++++++++- 2 files changed, 14 insertions(+), 1 deletion(-)
board/nvidia/jetson-tk1/jetson-tk1.c +3 -0
@@ -31,6 +31,9 @@ void pinmux_init(void)pinmux_config_drvgrp_table (jetson_tk1_drvgrps,ARRAY_SIZE (jetson_tk1_drvgrps)); + +pinmux_config_mipipadctrlgrp_table (jetson_tk1_mipipadctrlgrps, +ARRAY_SIZE (jetson_tk1_mipipadctrlgrps)); }#ifdef CONFIG_PCI_TEGRA
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h +11 -1
@@ -276,7 +276,6 @@ static const struct pmux_pingrp_config jetson_tk1_pingrps[] = {PINCFG (CPU_PWR_REQ ,CPU ,NORMAL ,NORMAL ,OUTPUT ,DEFAULT ,DEFAULT ),PINCFG (PWR_INT_N ,PMI ,UP ,TRISTATE ,INPUT ,DEFAULT ,DEFAULT ),PINCFG (RESET_OUT_N ,RESET_OUT_N ,NORMAL ,NORMAL ,INPUT ,DEFAULT ,DEFAULT ), -PINCFG (OWR ,RSVD2 ,DOWN ,TRISTATE ,OUTPUT ,DEFAULT ,NORMAL ),PINCFG (CLK_32K_IN ,CLK ,NORMAL ,TRISTATE ,INPUT ,DEFAULT ,DEFAULT ), PINCFG(JTAG_RTCK, RTCK, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT), };
@@ -296,4 +295,15 @@ static const struct pmux_pingrp_config jetson_tk1_pingrps[] = {static const struct pmux_drvgrp_config jetson_tk1_drvgrps[] = { }; +#define MIPIPADCTRLCFG (_grp, _mux) \ + { \ + .grp = PMUX_MIPIPADCTRLGRP_##_grp, \ + .func = PMUX_FUNC_##_mux, \ + } + +static const struct pmux_mipipadctrlgrp_config jetson_tk1_mipipadctrlgrps[] = { +/* grp, mux */ +MIPIPADCTRLCFG (DSI_B ,DSI_B ), +}; +#endif /* PINMUX_CONFIG_JETSON_TK1_H */
Signature · 1 line
2.8.1
PATCH 1/1 ARM: tegra: import latest Jetson TK1 spreadsheet
Quoted 12 lines · Stephen Warren
From: Stephen Warren <[email protected]>
This imports v11 of "Jetson TK1 Development Platform Pin Mux" from
https://developer.nvidia.com/embedded/downloads.The new version defines the mux option for the MIPI pad ctrl selection. The OWR pin no longer has an entry in the configuration table because the only mux option it support is OWR, that feature isn't supported, and hence can't conflict with any other pin. This pin can only usefully be used as a GPIO.
Signed-off-by Stephen Warren <[email protected]>
Quoted 8 lines
---
Note that the cleanup series I sent on Tuesday accidentally depends on this being applied first. I'd expect this to have higher priority than the cleanup series and be applied earlier anyway.board/nvidia/jetson-tk1/jetson-tk1.c | 3 +++ board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h | 12 +++++++++++- 2 files changed, 14 insertions(+), 1 deletion(-)
PATCH 1/1 ARM: tegra: import latest Jetson TK1 spreadsheet
In reply to Stephen WarrenQuoted 10 lines · Stephen Warren
From: Stephen Warren <[email protected]>
This imports v11 of "Jetson TK1 Development Platform Pin Mux" from
https://developer.nvidia.com/embedded/downloads.The new version defines the mux option for the MIPI pad ctrl selection. The OWR pin no longer has an entry in the configuration table because the only mux option it support is OWR, that feature isn't supported, and hence can't conflict with any other pin. This pin can only usefully be used as a GPIO.
TomW, could this please also be applied in time for the upcoming release?
PATCH 1/1 ARM: tegra: import latest Jetson TK1 spreadsheet
I'll take a look. Thanks.
Quoted 14 lines
-----Original Message-----
From: Stephen Warren [mailto:swarren at wwwdotorg.org]
Sent: Wednesday, May 04, 2016 12:01 PM
To: Tom Warren <[email protected]>
Cc: u-boot at lists.denx.de; Simon Glass <[email protected]>; Stephen Warren <[email protected]>
Subject: Re: [U-Boot] [PATCH] ARM: tegra: import latest Jetson TK1 spreadsheetQuoted 5 lines · Stephen Warren
From: Stephen Warren <[email protected]>
This imports v11 of "Jetson TK1 Development Platform Pin Mux" from
https://developer.nvidia.com/embedded/downloads.
Quoted 7 lines
Quoted 5 lines
The new version defines the mux option for the MIPI pad ctrl selection. The OWR pin no longer has an entry in the configuration table because the only mux option it support is OWR, that feature isn't supported, and hence can't conflict with any other pin. This pin can only usefully be used as a GPIO.
TomW, could this please also be applied in time for the upcoming release?
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------