Skip to contentSkip to conversation

new package: atfirmware

PATCH Superseded Joao Pinto 3 participants 9 messages May 9, 2016 – Jul 5, 2016 2 messages not in the archive

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Joao Pinto

author
#0 lore raw

v2 cover new package: atfirmware

This patch adds to buildroot an important package for ARM64 based development
boards: The ARM Trusted Firmware (atfirmware).
It also adds the scpfirmware which is a hidden package to get the System Control Processor (SCP) binary to be included in the bootloader (fip image), which is a requirement for ARM Juno's board. With this 2 packages, Juno gets fully supported in the Buildroot.

Joao Pinto (2):
new packages: atfirmware and scpfirmware
configs: add u-noot and atfirmware options to juno

 board/arm/juno/readme.txt       | 21 ++++++++--
 boot/Config.in                  |  2 +
 boot/atfirmware/Config.in       | 70 +++++++++++++++++++++++++++++++++
 boot/atfirmware/atfirmware.hash |  5 +++
 boot/atfirmware/atfirmware.mk   | 85 +++++++++++++++++++++++++++++++++++++++++
 boot/scpfirmware/Config.in      | 23 +++++++++++
 boot/scpfirmware/scpfirmware.mk | 18 +++++++++
 configs/arm_juno_defconfig      |  9 +++++
 8 files changed, 230 insertions(+), 3 deletions(-)
 create mode 100644 boot/atfirmware/Config.in
 create mode 100644 boot/atfirmware/atfirmware.hash
 create mode 100644 boot/atfirmware/atfirmware.mk
 create mode 100644 boot/scpfirmware/Config.in
 create mode 100644 boot/scpfirmware/scpfirmware.mk
Signature · 1 line
1.8.1.5
author
#1 lore raw

cover new package: atfirmware

Hi guys,
I will have to give a Juno training soon, and this feature would be great to have in the time. Could you comment of the atfirmware patch? Do you have any improvement suggestions?

Thanks.

Quoted 26 lines · Joao Pinto

This patch adds to buildroot an important package for ARM64 based development
boards: The ARM Trusted Firmware (atfirmware).
It also adds the scpfirmware which is a hidden package to get the System Control Processor (SCP) binary to be included in the bootloader (fip image), which is a requirement for ARM Juno's board. With this 2 packages, Juno gets fully supported in the Buildroot.

Joao Pinto (2):
new packages: atfirmware and scpfirmware
configs: add u-noot and atfirmware options to juno

 board/arm/juno/readme.txt       | 21 ++++++++--
 boot/Config.in                  |  2 +
 boot/atfirmware/Config.in       | 70 +++++++++++++++++++++++++++++++++
 boot/atfirmware/atfirmware.hash |  5 +++
 boot/atfirmware/atfirmware.mk   | 85 +++++++++++++++++++++++++++++++++++++++++
 boot/scpfirmware/Config.in      | 23 +++++++++++
 boot/scpfirmware/scpfirmware.mk | 18 +++++++++
 configs/arm_juno_defconfig      |  9 +++++
 8 files changed, 230 insertions(+), 3 deletions(-)
 create mode 100644 boot/atfirmware/Config.in
 create mode 100644 boot/atfirmware/atfirmware.hash
 create mode 100644 boot/atfirmware/atfirmware.mk
 create mode 100644 boot/scpfirmware/Config.in
 create mode 100644 boot/scpfirmware/scpfirmware.mk

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#3 lore raw

cover new package: atfirmware

Quoted 6 lines · Liviu.Dudau at arm.com
Quoted 4 lines · Joao Pinto

Hi guys,
I will have to give a Juno training soon, and this feature would be great to have in the time. Could you comment of the atfirmware patch? Do you have any improvement suggestions?

Quoted 6 lines

It looks good to me but I have no ACK powers in the buildroot world.

I am traveling away from my Juno boards at the moment so I cannot add my Tested-by.

Best regards,
Liviu

Thanks Liviu!

Quoted 33 lines
Quoted 32 lines

Thanks.

Quoted 26 lines · Joao Pinto

This patch adds to buildroot an important package for ARM64 based development
boards: The ARM Trusted Firmware (atfirmware).
It also adds the scpfirmware which is a hidden package to get the System Control Processor (SCP) binary to be included in the bootloader (fip image), which is a requirement for ARM Juno's board. With this 2 packages, Juno gets fully supported in the Buildroot.

Joao Pinto (2):
new packages: atfirmware and scpfirmware
configs: add u-noot and atfirmware options to juno

 board/arm/juno/readme.txt       | 21 ++++++++--
 boot/Config.in                  |  2 +
 boot/atfirmware/Config.in       | 70 +++++++++++++++++++++++++++++++++
 boot/atfirmware/atfirmware.hash |  5 +++
 boot/atfirmware/atfirmware.mk   | 85 +++++++++++++++++++++++++++++++++++++++++
 boot/scpfirmware/Config.in      | 23 +++++++++++
 boot/scpfirmware/scpfirmware.mk | 18 +++++++++
 configs/arm_juno_defconfig      |  9 +++++
 8 files changed, 230 insertions(+), 3 deletions(-)
 create mode 100644 boot/atfirmware/Config.in
 create mode 100644 boot/atfirmware/atfirmware.hash
 create mode 100644 boot/atfirmware/atfirmware.mk
 create mode 100644 boot/scpfirmware/Config.in
 create mode 100644 boot/scpfirmware/scpfirmware.mk
author
#4 lore raw

cover new package: atfirmware

Hi Thomas,
Could you please check the patches?

Thanks a lot!

Quoted 50 lines · Joao Pinto
Quoted 6 lines · Liviu.Dudau at arm.com
Quoted 4 lines · Joao Pinto

Hi guys,
I will have to give a Juno training soon, and this feature would be great to have in the time. Could you comment of the atfirmware patch? Do you have any improvement suggestions?

Quoted 6 lines

It looks good to me but I have no ACK powers in the buildroot world.

I am traveling away from my Juno boards at the moment so I cannot add my Tested-by.

Best regards,
Liviu

Thanks Liviu!

Quoted 33 lines
Quoted 32 lines

Thanks.

Quoted 26 lines · Joao Pinto

This patch adds to buildroot an important package for ARM64 based development
boards: The ARM Trusted Firmware (atfirmware).
It also adds the scpfirmware which is a hidden package to get the System Control Processor (SCP) binary to be included in the bootloader (fip image), which is a requirement for ARM Juno's board. With this 2 packages, Juno gets fully supported in the Buildroot.

Joao Pinto (2):
new packages: atfirmware and scpfirmware
configs: add u-noot and atfirmware options to juno

 board/arm/juno/readme.txt       | 21 ++++++++--
 boot/Config.in                  |  2 +
 boot/atfirmware/Config.in       | 70 +++++++++++++++++++++++++++++++++
 boot/atfirmware/atfirmware.hash |  5 +++
 boot/atfirmware/atfirmware.mk   | 85 +++++++++++++++++++++++++++++++++++++++++
 boot/scpfirmware/Config.in      | 23 +++++++++++
 boot/scpfirmware/scpfirmware.mk | 18 +++++++++
 configs/arm_juno_defconfig      |  9 +++++
 8 files changed, 230 insertions(+), 3 deletions(-)
 create mode 100644 boot/atfirmware/Config.in
 create mode 100644 boot/atfirmware/atfirmware.hash
 create mode 100644 boot/atfirmware/atfirmware.mk
 create mode 100644 boot/scpfirmware/Config.in
 create mode 100644 boot/scpfirmware/scpfirmware.mk
#5 lore raw

cover new package: atfirmware

Hello,

Quoted 1 line · Joao Pinto

Could you please check the patches?

Joao, I really do appreciate your patches, but it is definitely not useful to ping every two days about them. There are currently 282 patches in the queue, so there's many many other patches than yours.

If you want to help, please review and/or test patches from others.

I'll get to your patches at some point (or someone else will), but this may not happen in just two days.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
author
#6 lore raw

PATCH v2 1/2 new packages: atfirmware and scpfirmware

In reply to Joao Pinto

This patch adds 2 new packages to buildroot: atfirmware and scpfirmware. The first is used to generate the necessary bootlader binaries for ARM boards and the second is a hidden package that only serves to get the scp binary from Linaro repository to be used by ATFirmware (Juno requirement).

Signed-off-by Joao Pinto <[email protected]>

---
Changes v1->v2:
- Nothing changed (just to keep up with patch set version).

 boot/Config.in                  |  2 +
 boot/atfirmware/Config.in       | 70 +++++++++++++++++++++++++++++++++
 boot/atfirmware/atfirmware.hash |  5 +++
 boot/atfirmware/atfirmware.mk   | 85 +++++++++++++++++++++++++++++++++++++++++
 boot/scpfirmware/Config.in      | 23 +++++++++++
 boot/scpfirmware/scpfirmware.mk | 18 +++++++++
 6 files changed, 203 insertions(+)
 create mode 100644 boot/atfirmware/Config.in
 create mode 100644 boot/atfirmware/atfirmware.hash
 create mode 100644 boot/atfirmware/atfirmware.mk
 create mode 100644 boot/scpfirmware/Config.in
 create mode 100644 boot/scpfirmware/scpfirmware.mk
boot/Config.in +2 -0
index 54760b9..246d6a1 100644
@@ -3,6 +3,7 @@ menu "Bootloaders"
 source "boot/at91bootstrap/Config.in"
 source "boot/at91bootstrap3/Config.in"
 source "boot/at91dataflashboot/Config.in"
+source "boot/atfirmware/Config.in"
 source "boot/barebox/Config.in"
 source "boot/boot-wrapper-aarch64/Config.in"
 source "boot/grub/Config.in"

@@ -11,6 +12,7 @@ source "boot/gummiboot/Config.in"
 source "boot/lpc32xxcdl/Config.in"
 source "boot/mxs-bootlets/Config.in"
 source "boot/syslinux/Config.in"
+source "boot/scpfirmware/Config.in"
 source "boot/uboot/Config.in"
 source "boot/xloader/Config.in"
boot/atfirmware/Config.in new file +70 -0

70 lines not on this page · raw message

boot/atfirmware/atfirmware.hash new file +5 -0
new file mode 100644
index 0000000..05a90c7
@@ -0,0 +1,5 @@
+# From https://github.com/ARM-software/arm-trusted-firmware/archive/v1.2.tar.gz
+# Locally calculated
+sha256 fac2c08bd74337fec2e14a98fc9f748f atfirmware-v1.2.tar.gz
+md5 fac2c08bd74337fec2e14a98fc9f748f atfirmware-v1.2.tar.gz
+
boot/atfirmware/atfirmware.mk new file +85 -0

85 lines not on this page · raw message

boot/scpfirmware/Config.in new file +23 -0
new file mode 100644
index 0000000..f2acc24
@@ -0,0 +1,23 @@
+config BR2_TARGET_SCPFIRMWARE
+	bool
+	depends on BR2_aarch64
+
+if BR2_TARGET_SCPFIRMWARE
+
+config BR2_TARGET_SCPFIRMWARE_VERSION
+	string
+	default BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_VERSION
+
+config BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT
+	bool
+	default "y"
+
+config BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_REPO_URL
+	string
+	default "https://git.linaro.org/arm/vexpress-firmware.git"
+
+config BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_VERSION
+	string
+	default "901f81977c3b367a2e0bf3d6444be302822d97a3"
+
+endif
boot/scpfirmware/scpfirmware.mk new file +18 -0
new file mode 100644
index 0000000..0508a21
@@ -0,0 +1,18 @@
+################################################################################
+#
+# System Control Processor (SCP) Firmware
+#
+################################################################################
+
+SCPFIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_SCPFIRMWARE_VERSION))
+SCPFIRMWARE_SITE = $(call qstrip,$(BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_REPO_URL))
+SCPFIRMWARE_SITE_METHOD = git
+
+SCPFIRMWARE_INSTALL_IMAGES = YES
+
+define SCPFIRMWARE_INSTALL_IMAGES_CMDS
+	mv $(@D)/SOFTWARE/bl30.bin $(@D)/SOFTWARE/scp-fw.bin ;	\
+	cp -dpf $(@D)/SOFTWARE/scp-fw.bin $(BINARIES_DIR)/ ;
+endef
+
+$(eval $(generic-package))
Signature · 1 line
1.8.1.5
#7 lore raw

PATCH RESEND v2 1/2 new packages: atfirmware and scpfirmware

Hi Joao,

You add two patches within the same patch, we strongly prefer to have atomic changes, so it would nice if you could split and resend your series.

Meanwhile it will be marked as "Changes Request" in our patchwork.

Quoted 282 lines · Joao Pinto

This patch adds 2 new packages to buildroot: atfirmware and scpfirmware. The first is used to generate the necessary bootlader binaries for ARM boards and the second is a hidden package that only serves to get the scp binary from Linaro repository to be used by ATFirmware (Juno requirement).

Signed-off-by Joao Pinto <[email protected]>
Tested-by Liviu Dudau <[email protected]>

---
Changes v1->v2:
- Nothing changed (just to keep up with patch set version).

 boot/Config.in                  |  2 +
 boot/atfirmware/Config.in       | 70 +++++++++++++++++++++++++++++++++
 boot/atfirmware/atfirmware.hash |  5 +++
 boot/atfirmware/atfirmware.mk   | 85 +++++++++++++++++++++++++++++++++++++++++
 boot/scpfirmware/Config.in      | 23 +++++++++++
 boot/scpfirmware/scpfirmware.mk | 18 +++++++++
 6 files changed, 203 insertions(+)
 create mode 100644 boot/atfirmware/Config.in
 create mode 100644 boot/atfirmware/atfirmware.hash
 create mode 100644 boot/atfirmware/atfirmware.mk
 create mode 100644 boot/scpfirmware/Config.in
 create mode 100644 boot/scpfirmware/scpfirmware.mk
boot/Config.in +2 -0
index 54760b9..246d6a1 100644
@@ -3,6 +3,7 @@ menu "Bootloaders"
 source "boot/at91bootstrap/Config.in"
 source "boot/at91bootstrap3/Config.in"
 source "boot/at91dataflashboot/Config.in"
+source "boot/atfirmware/Config.in"
 source "boot/barebox/Config.in"
 source "boot/boot-wrapper-aarch64/Config.in"
 source "boot/grub/Config.in"

@@ -11,6 +12,7 @@ source "boot/gummiboot/Config.in"
 source "boot/lpc32xxcdl/Config.in"
 source "boot/mxs-bootlets/Config.in"
 source "boot/syslinux/Config.in"
+source "boot/scpfirmware/Config.in"
 source "boot/uboot/Config.in"
 source "boot/xloader/Config.in"
boot/atfirmware/Config.in new file +70 -0
new file mode 100644
index 0000000..b116144
@@ -0,0 +1,70 @@
+config BR2_TARGET_ATFIRMWARE
+       bool "ARM Trusted Firmware (ATF)"
+       depends on BR2_aarch64 && BR2_TARGET_UBOOT
+       select BR2_TARGET_SCPFIRMWARE if BR2_TARGET_ATFIRMWARE_PLATFORM='juno'
+       help
+         Enable this option if you want to build the ATF for your ARM based
+         embedded device.
+
+if BR2_TARGET_ATFIRMWARE
+choice
+       prompt "version"
+       help
+         Select the specific ATF version you want to use
+
+config BR2_TARGET_ATFIRMWARE_LATEST_VERSION
+       bool "v1.2"
+
+config BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL
+       bool "Custom tarball"
+
+config BR2_TARGET_ATFIRMWARE_CUSTOM_GIT
+       bool "Custom Git repository"
+
+endchoice
+
+if BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL
+
+config BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL_LOCATION
+       string "URL of custom ARM Trusted Firmware tarball"
+
+endif
+
+config BR2_TARGET_ATFIRMWARE_VERSION
+       string
+       default "v1.2"  if BR2_TARGET_ATFIRMWARE_LATEST_VERSION
+       default "custom"        if BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL
+       default BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_VERSION if BR2_TARGET_ATFIRMWARE_CUSTOM_GIT
+
+config BR2_TARGET_ATFIRMWARE_CUSTOM_PATCH_DIR
+       string "Custom patch dir"
+       help
+         If your ATF requires custom patches, add the path to the
+         directory containing the patches here.
+
+if BR2_TARGET_ATFIRMWARE_CUSTOM_GIT
+
+config BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_REPO_URL
+       string "URL of custom Git repository"
+
+config BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_VERSION
+       string "Custom Git version"
+       help
+         Revision to use in the typical format used by Git
+         E.G. a sha id, a tag, ..
+
+endif
+
+config BR2_TARGET_ATFIRMWARE_PLATFORM
+       string "Name of ATF platform to build for"
+       help
+         Target plaform to build for.
+         E.G. If using ARM Juno, please type 'juno'
+
+config BR2_TARGET_ATFIRMWARE_ADDITIONAL_VARIABLES
+       string "Additional ATF build variables"
+       help
+         Additional parameters for the ATF build
+         E.G. 'DEBUG=1 LOG_LEVEL=20'
+
+endif
boot/atfirmware/atfirmware.hash new file +5 -0
new file mode 100644
index 0000000..05a90c7
@@ -0,0 +1,5 @@
+# From https://github.com/ARM-software/arm-trusted-firmware/archive/v1.2.tar.gz
+# Locally calculated
+sha256 fac2c08bd74337fec2e14a98fc9f748f atfirmware-v1.2.tar.gz
+md5 fac2c08bd74337fec2e14a98fc9f748f atfirmware-v1.2.tar.gz
+
boot/atfirmware/atfirmware.mk new file +85 -0
new file mode 100644
index 0000000..e2744c0
@@ -0,0 +1,85 @@
+################################################################################
+#
+# ARM Trusted Firmware
+#
+################################################################################
+
+ATFIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ATFIRMWARE_VERSION))
+
+#package dependencies
+ATFIRMWARE_DEPENDENCIES += uboot
+
+ifeq ($(ATFIRMWARE_VERSION),custom)
+# Handle custom ATF tarballs as specified by the configuration
+ATFIRMWARE_TARBALL = $(call qstrip,$(BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL_LOCATION))
+ATFIRMWARE_SITE = $(patsubst %/,%,$(dir $(ATFIRMWARE_TARBALL)))
+ATFIRMWARE_SOURCE = $(notdir $(ATFIRMWARE_TARBALL))
+BR_NO_CHECK_HASH_FOR += $(ATFIRMWARE_SOURCE)
+else ifeq ($(BR2_TARGET_ATFIRMWARE_CUSTOM_GIT),y)
+ATFIRMWARE_SITE = $(call qstrip,$(BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_REPO_URL))
+ATFIRMWARE_SITE_METHOD = git
+endif
+
+ifneq ($(call qstrip,$(BR2_TARGET_ATFIRMWARE_CUSTOM_PATCH_DIR)),)
+define ATFIRMWARE_APPLY_CUSTOM_PATCHES
+       $(APPLY_PATCHES) $(@D) \
+               $(BR2_TARGET_ATFIRMWARE_CUSTOM_PATCH_DIR) \*.patch
+endef
+
+ATFIRMWARE_POST_PATCH_HOOKS += ATFIRMWARE_APPLY_CUSTOM_PATCHES
+endif
+
+ATFIRMWARE_INSTALL_IMAGES = YES
+
+# Automatically find the U-Boot binary
+ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME)),)
+ATFIRMWARE_PAYLOAD_PATH = $(BINARIES_DIR)/"u-boot.bin"
+else
+ATFIRMWARE_PAYLOAD_PATH = $(BINARIES_DIR)/$(call qstrip,$(BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME))
+endif
+
+ATFIRMWARE_PLATFORM = $(call qstrip,$(BR2_TARGET_ATFIRMWARE_PLATFORM))
+
+#if juno target is selected, then lets configured the expected SCP firmware binary
+ifeq ($(ATFIRMWARE_PLATFORM),juno)
+ATFIRMWARE_SCP_FIRMWARE="SCP_BL2=$(BINARIES_DIR)/scp-fw.bin"
+#configure the dependencie of scpfirmware package
+ATFIRMWARE_DEPENDENCIES += scpfirmware
+endif
+
+ATFIRMWARE_MAKE_OPTS += \
+       CROSS_COMPILE="$(TARGET_CROSS)" \
+       BL33=$(call qstrip,$(ATFIRMWARE_PAYLOAD_PATH)) \
+       $(call qstrip,$(BR2_TARGET_ATFIRMWARE_ADDITIONAL_VARIABLES)) \
+       $(ATFIRMWARE_SCP_FIRMWARE) \
+       PLAT=$(ATFIRMWARE_PLATFORM) \
+       all fip
+
+define ATFIRMWARE_BUILD_CMDS
+       $(TARGET_CONFIGURE_OPTS) \
+       $(MAKE) -C $(@D) $(ATFIRMWARE_MAKE_OPTS) \
+       $(ATFIRMWARE_MAKE_TARGET)
+endef
+
+define ATFIRMWARE_INSTALL_IMAGES_CMDS
+       cp -dpf $(@D)/build/$(ATFIRMWARE_PLATFORM)/release/*.bin $(BINARIES_DIR)/ ;
+endef
+
+# Configuration ckeck
+ifeq ($(BR2_TARGET_ATFIRMWARE)$(BR_BUILDING),yy)
+
+ifeq ($(ATFIRMWARE_VERSION),custom)
+ifeq ($(call qstrip,$(BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL_LOCATION))),)
+$(error No tarball location specified. Please check BR2_TARGET_ATFIRMWARE_CUSTOM_TARBALL_LOCATION))
+endif
+endif
+
+ifeq ($(BR2_TARGET_ATFIRMWARE_CUSTOM_GIT),y)
+ifeq ($(call qstrip,$(BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_REPO_URL)),)
+$(error No repository specified. Please check BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_REPO_URL)
+endif
+endif
+
+endif
+
+$(eval $(generic-package))
boot/scpfirmware/Config.in new file +23 -0
new file mode 100644
index 0000000..f2acc24
@@ -0,0 +1,23 @@
+config BR2_TARGET_SCPFIRMWARE
+       bool
+       depends on BR2_aarch64
+
+if BR2_TARGET_SCPFIRMWARE
+
+config BR2_TARGET_SCPFIRMWARE_VERSION
+       string
+       default BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_VERSION
+
+config BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT
+       bool
+       default "y"
+
+config BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_REPO_URL
+       string
+       default "https://git.linaro.org/arm/vexpress-firmware.git"
+
+config BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_VERSION
+       string
+       default "901f81977c3b367a2e0bf3d6444be302822d97a3"
+
+endif
boot/scpfirmware/scpfirmware.mk new file +18 -1
new file mode 100644
index 0000000..0508a21
@@ -0,0 +1,18 @@
+################################################################################
+#
+# System Control Processor (SCP) Firmware
+#
+################################################################################
+
+SCPFIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_SCPFIRMWARE_VERSION))
+SCPFIRMWARE_SITE = $(call qstrip,$(BR2_TARGET_SCPFIRMWARE_CUSTOM_GIT_REPO_URL))
+SCPFIRMWARE_SITE_METHOD = git
+
+SCPFIRMWARE_INSTALL_IMAGES = YES
+
+define SCPFIRMWARE_INSTALL_IMAGES_CMDS
+       mv $(@D)/SOFTWARE/bl30.bin $(@D)/SOFTWARE/scp-fw.bin ;  \
+       cp -dpf $(@D)/SOFTWARE/scp-fw.bin $(BINARIES_DIR)/ ;
+endef
+
+$(eval $(generic-package))
--

1.8.1.5

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

author
#8 lore raw

PATCH v2 2/2 configs: add u-boot and atfirmware options to juno

In reply to Joao Pinto

This patch adds the necessary U-Boot and ATFirmware configurations to the Juno's defconfig and updates the readme.txt file regarding the new output binaries.

Signed-off-by Joao Pinto <[email protected]>

---
Changes v1->v2:
- Changed BR2_TARGET_UBOOT_DEFCONFIG to BR2_TARGET_UBOOT_BOARDNAME
- Fixed a typo in the e-mail subject

 board/arm/juno/readme.txt  | 21 ++++++++++++++++++---
 configs/arm_juno_defconfig |  9 +++++++++
 2 files changed, 27 insertions(+), 3 deletions(-)
board/arm/juno/readme.txt +18 -3
index 52fabf9..2a2af55 100644
@@ -7,8 +7,8 @@ These instructions apply to all models of the ARM Juno:
   - Juno r0 (does not support PCIe)
   - Juno r1 (supports PCIe)
 
-Buildroot will generate the kernel image, device tree blob and a
-minimal root filesystem.
+Buildroot will generate the kernel image, device tree blob, bootloader binaries
+and a minimal root filesystem.
 
 How to build it
 ===============

@@ -42,6 +42,20 @@ After building, you should obtain this tree:
     +-- juno.dtb (if Juno r0 is used)
     +-- juno-r1.dtb (if Juno r1 is used)
     +-- Image
+    +-- bl1.bin
+    +-- bl2.bin
+    +-- bl2u.bin
+    +-- bl31.bin
+    +-- fip.bin
+    +-- scp-fw.bin
+    +-- u-boot.bin
+
+Preparing your rootfs
+======================
+
+Format your pen drive as a ext3 filesystem by executing:
+
+   $ mkfs.ext3 /dev/<your device>
 
 Preparing your rootfs
 ======================

@@ -98,7 +112,8 @@ Installing kernel image and DTB
 3. Open the software/ folder
 4. Copy the 'Image' file to software/
 5. Copy the 'juno-r1.dtb' (r1) or the 'juno.dtb' (r0) file to software/
-6. Press the red button in the front pannel of ARM Juno
+6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
+7. Press the red button in the front pannel of ARM Juno
 
 At this time, the board will erase the Flash entry for each new item and
 replace it with the lastest ones.
configs/arm_juno_defconfig +9 -0
index 87b6374..2349000 100644
@@ -12,3 +12,12 @@ BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/arm/juno/linux-juno-defconfig"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1"
+BR2_TARGET_ATFIRMWARE=y
+BR2_TARGET_ATFIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
+BR2_TARGET_ATFIRMWARE_CUSTOM_GIT_VERSION="v1.2"
+BR2_TARGET_ATFIRMWARE_PLATFORM="juno"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="vexpress_aemv8a_juno"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.03"
Signature · 1 line
1.8.1.5

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#10 lore raw

PATCH RESEND v2 2/2 configs: add u-noot and atfirmware options to juno

Hi,

Quoted 9 lines · Liviu.Dudau at arm.com

Hi Joao,

Your commit subject contains a mis-spelling of U-Boot.

Also, your "Resend" is not the same version as the original, you have changed BR2_TARGET_UBOOT_DEFCONFIG into BR2_TARGET_UBOOT_BOARDNAME. I've discovered that because I have applied your original patch and not the "Resend". Please label the patches correctly and add version number and logs to the 0/x email at least.

You spotted that right, thanks! Going to send e v2 in a sec.

Quoted 8 lines

I've given the build a go, it boots fine on my Juno r0 board (well, mostly, the hardcoded command line is waiting for /dev/sda2 which is not going to work for me because I have an NFS rootfs).

Best regards,
Liviu

Thanks,
Joao