Skip to contentSkip to conversation

ARM: multi_v7_defconfig: Add more Broadcom SoCs

PATCH New Florian Fainelli 2 participants 10 messages May 20, 2016 – May 31, 2016 Arm (32-bit)

lore
Share & tools
lore

Florian Fainelli

author
#0 lore raw

cover ARM: multi_v7_defconfig: Add more Broadcom SoCs

This patch series enables more fundamental drivers which are useful for Broadcom BCM63xx and BCM7xxx SoCs.

The last patch remove bcm_defconfig which is causing a whole lot of confusiong at best and is completely out of sync now.

Florian Fainelli (7):
ARM: multi_v7_defconfig: Enable BCM63xx
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BRCMSTB AHCI
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: Remove bcm_defconfig

 arch/arm/configs/bcm_defconfig      | 142 ------------------------------------
 arch/arm/configs/multi_v7_defconfig |  13 ++++
 2 files changed, 13 insertions(+), 142 deletions(-)
 delete mode 100644 arch/arm/configs/bcm_defconfig
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 1/7 ARM: multi_v7_defconfig: Enable BCM63xx

Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as the serial console driver for this platform.

Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/configs/multi_v7_defconfig +3 -0
index 8f857564657f..968a7ec08633 100644
@@ -36,6 +36,7 @@ CONFIG_ARCH_BCM_21664=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_63XX=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y

@@ -291,6 +292,8 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SERIAL_MESON=y
 CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH 2/7 ARM: multi_v7_defconfig: Enable BRCMSTB networking

In reply to Florian Fainelli

Enable the required drivers and subsystems to bring-up networking on Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both have proper dependencies on their internal PHY and MDIO drivers.

Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/configs/multi_v7_defconfig +5 -0
index 968a7ec08633..31ed7318f406 100644
@@ -158,6 +158,8 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_DSA=m
+CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y

@@ -166,6 +168,7 @@ CONFIG_CAN_AT91=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_XILINXCAN=y
 CONFIG_CAN_MCP251X=y
+CONFIG_NET_DSA_BCM_SF2=m
 CONFIG_CAN_SUN4I=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m

@@ -225,6 +228,8 @@ CONFIG_VIRTIO_NET=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_MACB=y
+CONFIG_BCMGENET=m
+CONFIG_SYSTEMPORT=m
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_GIANFAR=y
 CONFIG_IGB=y
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH 3/7 ARM: multi_v7_defconfig: Enable BRCMSTB AHCI

In reply to Florian Fainelli

Enable the Broadcom STB AHCI driver and its companion PHY driver to get functional SATA3 support.

Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/configs/multi_v7_defconfig +2 -0
index 31ed7318f406..07ad8f9a033b 100644
@@ -217,6 +217,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_BRCMSTB=y
 CONFIG_AHCI_ST=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y

@@ -830,6 +831,7 @@ CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_BRCMSTB_SATA=y
 CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_BCM2835_MBOX=y
Signature · 1 line
2.7.4
author
#4 lore raw

PATCH 4/7 ARM: multi_v7_defconfig: Enable BCM7038 Watchdog

In reply to Florian Fainelli

The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed for system reboot, we just turn it on as a module.

Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/multi_v7_defconfig +1 -0
index 07ad8f9a033b..13e5af6334ac 100644
@@ -457,6 +457,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_BCM7038_WDT=m
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
Signature · 1 line
2.7.4
author
#5 lore raw

PATCH 5/7 ARM: multi_v7_defconfig: Enable Broadcom STB PWM

In reply to Florian Fainelli
Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/multi_v7_defconfig +1 -0
index 13e5af6334ac..b59081bda51b 100644
@@ -816,6 +816,7 @@ CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PWM_STI=y
 CONFIG_PWM_BCM2835=y
+CONFIG_PWM_BRCMSTB=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
 CONFIG_PHY_BERLIN_USB=y
Signature · 1 line
2.7.4
author
#6 lore raw

PATCH 6/7 ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog

In reply to Florian Fainelli

In order to get rid of bcm_defconfig, enable this driver which is needed by some Broadcom SoCs based on the Kona architecture to reboot.

Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/multi_v7_defconfig +1 -0
index b59081bda51b..d180b6694374 100644
@@ -458,6 +458,7 @@ CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
+CONFIG_BCM_KONA_WDT=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
Signature · 1 line
2.7.4
author
#7 lore raw

PATCH 7/7 ARM: Remove bcm_defconfig

In reply to Florian Fainelli

We have everything we need in multi_v7_defconfig that exists in bcm_defconfig, so get rid of that file to reduce the maintenance burden.

Signed-off-by Florian Fainelli <[email protected]>
---
 arch/arm/configs/bcm_defconfig | 142 -----------------------------------------
 1 file changed, 142 deletions(-)
 delete mode 100644 arch/arm/configs/bcm_defconfig
arch/arm/configs/bcm_defconfig deleted +0 -142
deleted file mode 100644
index 7117662bab2e..000000000000
@@ -1,142 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_21664=y
-CONFIG_ARCH_BCM_281XX=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M"
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_SYN_COOKIES=y
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_BLK_DEV is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_BCM590XX=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_BCM590XX=y
-
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_TEST=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_BCM_KONA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_PWM=y
-CONFIG_PWM_BCM_KONA=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_XZ_DEC=y
-CONFIG_AVERAGE=y
-CONFIG_PINCTRL_BCM281XX=y
-CONFIG_WATCHDOG=y
-CONFIG_BCM_KONA_WDT=y
-CONFIG_BCM_KONA_WDT_DEBUG=y
Signature · 1 line
2.7.4
#8 lore raw

cover ARM: multi_v7_defconfig: Add more Broadcom SoCs

In reply to Florian Fainelli

Hi Florian,

Quoted 6 lines · Florian Fainelli

This patch series enables more fundamental drivers which are useful for Broadcom BCM63xx and BCM7xxx SoCs.

The last patch remove bcm_defconfig which is causing a whole lot of confusiong at best and is completely out of sync now.

Quoted 8 lines

Florian Fainelli (7):
ARM: multi_v7_defconfig: Enable BCM63xx
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BRCMSTB AHCI
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: Remove bcm_defconfig

Patch series looks good. Given we can't upstream a defconfig per SoC family, bcm_defconfig is quite useless and can be removed.

Acked-by Scott Branden <[email protected]>
Quoted 6 lines
  arch/arm/configs/bcm_defconfig      | 142 ------------------------------------
  arch/arm/configs/multi_v7_defconfig |  13 ++++
  2 files changed, 13 insertions(+), 142 deletions(-)

delete mode 100644 arch/arm/configs/bcm_defconfig

author
#9 lore raw

cover ARM: multi_v7_defconfig: Add more Broadcom SoCs

Quoted 19 lines · Scott Branden

Hi Florian,

Quoted 7 lines · Florian Fainelli

This patch series enables more fundamental drivers which are useful for Broadcom BCM63xx and BCM7xxx SoCs.

The last patch remove bcm_defconfig which is causing a whole lot of confusiong
at best and is completely out of sync now.

Quoted 8 lines

Florian Fainelli (7):
ARM: multi_v7_defconfig: Enable BCM63xx
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BRCMSTB AHCI
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: Remove bcm_defconfig

Quoted 4 lines

Patch series looks good. Given we can't upstream a defconfig per SoC family, bcm_defconfig is quite useless and can be removed.

Acked-by Scott Branden <[email protected]>

Series applied, thanks!

Signature · 1 line
Florian