Skip to contentSkip to conversation

pico-imx6ul: Select CONFIG_HUSH_PARSER option

PATCH New Fabio Estevam 4 participants 4 messages May 17, 2016 – May 24, 2016 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH v2 1/1 pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following problem:

Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'

Reported-by Daiane Angolini <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Remove extra whitespaces in the error messages (Daiane)

 configs/pico-imx6ul_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/pico-imx6ul_defconfig +1 -0
index cc49dc9..d46cd3b 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_PICO_IMX6UL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/technexion/pico-imx6ul/imximage.cfg"
+CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_MEMTEST=y
Signature · 1 line
1.9.1
#1 lore raw

PATCH v2 1/1 pico-imx6ul: Select CONFIG_HUSH_PARSER option

Quoted 10 lines

From: Fabio Estevam [mailto:fabio.estevam at nxp.com]
Sent: Tuesday, May 17, 2016 10:52 AM
To: sbabic at denx.de
Cc: Daiane Angolini <[email protected]>; u-boot at lists.denx.de; Fabio Estevam <[email protected]>
Subject: [PATCH v2] pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following problem:

Quoted 7 lines

Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'

Reported-by Daiane Angolini <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
Tested-by Daiane Angolini <[email protected]>
reviewer
#2 lore raw

PATCH v2 1/1 pico-imx6ul: Select CONFIG_HUSH_PARSER option

Hi Stefano,

Quoted 15 lines · Daiane Angolini
Quoted 15 lines

From: Fabio Estevam [mailto:fabio.estevam at nxp.com]
Sent: Tuesday, May 17, 2016 10:52 AM
To: sbabic at denx.de
Cc: Daiane Angolini <[email protected]>; u-boot at lists.denx.de; Fabio Estevam <[email protected]>
Subject: [PATCH v2] pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following problem:

Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'

Quoted 4 lines
Quoted 2 lines
Reported-by Daiane Angolini <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
Tested-by Daiane Angolini <[email protected]>

Could this one be applied, please?

#3 lore raw

PATCH v2 1/1 pico-imx6ul: Select CONFIG_HUSH_PARSER option

Quoted 19 lines · Fabio Estevam

Hi Stefano,

Quoted 15 lines · Daiane Angolini
Quoted 15 lines

From: Fabio Estevam [mailto:fabio.estevam at nxp.com]
Sent: Tuesday, May 17, 2016 10:52 AM
To: sbabic at denx.de
Cc: Daiane Angolini <[email protected]>; u-boot at lists.denx.de; Fabio Estevam <[email protected]>
Subject: [PATCH v2] pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following problem:

Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Reported-by Daiane Angolini <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
Tested-by Daiane Angolini <[email protected]>

Could this one be applied, please?

I see - in patchworks is assigned to Tom, this is the reason disappeared from my queue. I take over and apply it.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================