Skip to contentSkip to conversation

powerpc/t2080qds: Enable qixis commands to reboot from NAND and SD

PATCH New York Sun 1 participant 2 messages Apr 7, 2016 – May 25, 2016

lore
Share & tools
lore

York Sun

author
#0 lore raw

PATCH 1/1 powerpc/t2080qds: Enable qixis commands to reboot from NAND and SD

Signed-off-by York Sun <[email protected]>
CC Shengzhou Liu <[email protected]>

---

 include/configs/T208xQDS.h |    4 ++++
 1 file changed, 4 insertions(+)
include/configs/T208xQDS.h +4 -0
index 5957fa8..ec53ff0 100644
@@ -291,6 +291,10 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_SHIFT		0
 #define QIXIS_LBMAP_DFLTBANK		0x00
 #define QIXIS_LBMAP_ALTBANK		0x04
+#define QIXIS_LBMAP_NAND		0x09
+#define QIXIS_LBMAP_SD			0x00
+#define QIXIS_RCW_SRC_NAND		0x104
+#define QIXIS_RCW_SRC_SD		0x040
 #define QIXIS_RST_CTL_RESET		0x83
 #define QIXIS_RST_FORCE_MEM		0x1
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH 1/1 powerpc/t2080qds: Enable qixis commands to reboot from NAND and SD

Quoted 8 lines · york sun
Signed-off-by York Sun <[email protected]>
CC Shengzhou Liu <[email protected]>

---

 include/configs/T208xQDS.h |    4 ++++
 1 file changed, 4 insertions(+)

Applied to u-boot-mpc85xx master branch, awaiting upstream.

Thanks.

York