Skip to contentSkip to conversation

Support of 802.11k

DISCUSSION Stefan Feirer 1 participant 1 message Jun 2, 2016 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hello,

I'm currently working on my master thesis at vienna university of technology.
Topic of my work is building a prototype to measure wifi roaming performance with 802.11k (Radio Resouce Management) and 802.11r protocol amendments. My hardware setup uses the PCIe Wifi Card Compex WLE600VX with QCA9882 Chipset and ath10k_pci kernel module.
Operating System is Ubuntu 15.10 with Kernel Version 4.2.

With my setup 802.11r is working well with wpa_supplicant but I'm not able to get 802.11k working. As I already mentioned I'm using the ath10k kernel module with firmware version 10.2.4.45.

I suppose 802.11k (RRM) is not working because it is not supported by the firmware.
The reason of my guess is the following:
When I looked through the ath10k source code for RRM support I found out that in the file wmi.c there are the structs
- wmi_cmd_map
- wmi_10x_cmd_map
- wmi_10_2_4_cmd_map

In the last two the function bcn_tmpl_cmdid and prb_tmpl_cmdid both are not supported (and I use firmware version 10.2.4) and these use the struct wmi_bcn_prb_info (wmi.h) which includes the rrm info.

This leads me to two questions:
- Am I right, that the firmware does not support 802.11k or should 802.11k be supported by the QCA9882 Chipset and the atheros firmware and kernel modules?
- Are there any atheros wifi modules which were successfully tested with 802.11k?

Hopefully someone can help me with this!
Thanks
Stefan Feirer

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k