freescale: Tweak various Makefiles to remove redundancy, fix aesthetics
PATCH 1/1 freescale: Tweak various Makefiles to remove redundancy, fix aesthetics
No intended functional change, just remove redundancies in some Makefiles, and make whitespace aesthetics uniform.
Signed-off-by Robert P. J. Day <[email protected]>
---
lots of remaining mess, but hopefully a bit less. do with it what
you will.
board/freescale/b4860qds/Makefile +3 -3
@@ -5,11 +5,11 @@ # ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o else obj-y += b4860qds.o -obj-$(CONFIG_B4860QDS)+= eth_b4860qds.o -obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_B4860QDS) += eth_b4860qds.o +obj-$(CONFIG_PCI) += pci.o endif obj-y += ddr.o
board/freescale/bsc9131rdb/Makefile +6 -10
@@ -13,15 +13,11 @@ endif endif ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - +obj-y += spl_minimal.o else - -obj-y += bsc9131rdb.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o -#obj-y += bsc9131rdb_mux.o - +obj-y += bsc9131rdb.o +obj-y += ddr.o endif + +obj-y += law.o +obj-y += tlb.o
board/freescale/bsc9132qds/Makefile +3 -6
@@ -13,14 +13,11 @@ endif endif ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - +obj-y += spl_minimal.o else - obj-y += bsc9132qds.o obj-y += ddr.o +endif + obj-y += law.o obj-y += tlb.o - -endif
board/freescale/c29xpcie/Makefile +3 -3
@@ -11,15 +11,15 @@ endif endif ifdef MINIMAL -obj-y += spl_minimal.o tlb.o law.o +obj-y += spl_minimal.o else ifdef CONFIG_SPL_BUILD obj-y += spl.o endif - obj-y += c29xpcie.o obj-y += cpld.o obj-y += ddr.o +endif + obj-y += law.o obj-y += tlb.o -endif
board/freescale/p1010rdb/Makefile +4 -8
@@ -13,18 +13,14 @@ endif endif ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - +obj-y += spl_minimal.o else - ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o endif - obj-y += p1010rdb.o obj-y += ddr.o +endif + obj-y += law.o obj-y += tlb.o - -endif
board/freescale/p1022ds/Makefile +5 -7
@@ -13,17 +13,15 @@ endif endif ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - +obj-y += spl_minimal.o else ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o endif obj-y += p1022ds.o obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o - obj-$(CONFIG_FSL_DIU_FB) += diu.o endif + +obj-y += law.o +obj-y += tlb.o
board/freescale/p1_p2_rdb_pc/Makefile +7 -10
@@ -13,17 +13,14 @@ endif endif ifdef MINIMAL - -obj-y += spl_minimal.o tlb.o law.o - +obj-y += spl_minimal.o else ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o endif - -obj-y += p1_p2_rdb_pc.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o - +obj-y += p1_p2_rdb_pc.o +obj-y += ddr.o endif + +obj-y += law.o +obj-y += tlb.o
board/freescale/p2041rdb/Makefile +1 -1
@@ -7,6 +7,6 @@ # obj-y += p2041rdb.o -obj-y += cpld.o +obj-y += cpld.o obj-y += ddr.o obj-y += eth.o
board/freescale/t102xqds/Makefile +1 -1
@@ -5,7 +5,7 @@ # ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o else obj-y += t102xqds.o obj-y += eth_t102xqds.o
board/freescale/t102xrdb/Makefile +1 -1
@@ -5,7 +5,7 @@ # ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o else obj-y += t102xrdb.o obj-$(CONFIG_T1024RDB) += cpld.o
board/freescale/t208xqds/Makefile +2 -4
@@ -7,10 +7,8 @@ ifdef CONFIG_SPL_BUILD obj-y += spl.o else -obj-$(CONFIG_T2080QDS) += t208xqds.o -obj-$(CONFIG_T2080QDS) += eth_t208xqds.o -obj-$(CONFIG_T2081QDS) += t208xqds.o -obj-$(CONFIG_T2081QDS) += eth_t208xqds.o +obj-$(CONFIG_T2080QDS) += t208xqds.o eth_t208xqds.o +obj-$(CONFIG_T2081QDS) += t208xqds.o eth_t208xqds.o obj-$(CONFIG_PCI) += pci.o endif
board/freescale/t208xrdb/Makefile +2 -4
@@ -5,11 +5,9 @@ # ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o else -obj-$(CONFIG_T2080RDB) += t208xrdb.o -obj-$(CONFIG_T2080RDB) += eth_t208xrdb.o -obj-$(CONFIG_T2080RDB) += cpld.o +obj-$(CONFIG_T2080RDB) += t208xrdb.o eth_t208xrdb.o cpld.o obj-$(CONFIG_PCI) += pci.o endif
board/freescale/t4qds/Makefile +3 -3
@@ -5,12 +5,12 @@ # ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o else -obj-$(CONFIG_T4240QDS) += t4240qds.o -obj-$(CONFIG_T4240QDS)+= eth.o +obj-$(CONFIG_T4240QDS) += t4240qds.o eth.o obj-$(CONFIG_PCI) += pci.o endif + obj-y += ddr.o obj-y += law.o obj-y += tlb.o
board/freescale/t4rdb/Makefile +5 -4
@@ -5,13 +5,14 @@ # ifdef CONFIG_SPL_BUILD -obj-y += spl.o +obj-y += spl.o else -obj-$(CONFIG_T4240RDB) += t4240rdb.o -obj-y += cpld.o -obj-y += eth.o +obj-$(CONFIG_T4240RDB) += t4240rdb.o +obj-y += cpld.o +obj-y += eth.o obj-$(CONFIG_PCI) += pci.o endif + obj-y += ddr.o obj-y += law.o obj-y += tlb.o
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================PATCH 1/1 freescale: Tweak various Makefiles to remove redundancy, fix aesthetics
Quoted 8 lines · Robert P. J. Day
No intended functional change, just remove redundancies in some Makefiles, and make whitespace aesthetics uniform.
Signed-off-by Robert P. J. Day <[email protected]>---
Applied to u-boot-mpc85xx master. Awaiting upstream. Thanks.
York