configs/qemu: bump to latest version

PATCH New Gustavo Zacarias 3 participants 10 messages Jun 4, 2016 – Jun 7, 2016

Subsystems (2)

PowerPC Arm/versatile express platform

lore

Share & tools

lore

Gustavo Zacarias

author

2016-06-04 20:30 UTC #0 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig Kernel Qemu Network Status
--------------------------------------------------------------

aarch64_virt            4.5.6   2.5.0           YES     OK (4)
arm_versatile           4.6.1   2.5.0           YES     OK
arm_vexpress            4.6.1   2.5.0           YES     OK
m68k_mcf5208            4.6.1   2.5.0           YES     OK
m68k_q800               4.6.1   q800-v2.4.0     NO (3)  OK
microblazebe            4.6.1   2.5.0           YES     OK
microblazeel            4.6.1   2.5.0           YES     OK
mips64el_malta          4.6.1   2.5.0           YES     OK
mips64_malta            4.6.1   2.5.0           YES     OK
mipsel_malta            4.6.1   2.5.0           YES     OK
mips_malta              4.6.1   2.5.0           YES     OK
ppc_g3beige             4.6.1   2.5.0           YES     OK
ppc_mpc8544ds           4.6.1   2.5.0           YES     OK
ppc_virtex_ml507        4.6.1   2.5.0           NO      OK
ppc64_pseries           4.6.1   2.5.0           YES     OK
sh4                     4.6.1   2.5.0           YES     OK
sh4eb                   4.6.1   2.5.0           NO (1)  OK
sparc_ss10              4.6.1   2.5.0           YES     OK
sparc64_sun4u           4.6.1   2.5.0           YES     OK
sparc_sun4u             4.6.1   2.5.0           YES     OK
x86                     4.6.1   2.5.0           YES     OK
x86_64                  4.6.1   2.5.0           YES     OK
xtensa_lx60             4.4.12  2.5.0           YES     OK (2)
xtensa_lx60_nommu       4.4.12  2.5.0           YES     OK (2)

(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5/4.6
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6

Signed-off-by Gustavo Zacarias <[email protected]>

---
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../patches/linux/0001-fix-do_sigreturn.patch      | 100 ---------------------
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../sh4-r2d/{linux-4.5.config => linux-4.6.config} |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 .../{linux-4.5.config => linux-4.6.config}         |   0
 board/qemu/x86/linux-4.5.config                    |   1 -
 board/qemu/x86/linux-4.6.config                    |   1 +
 .../x86_64/{linux-4.5.config => linux-4.6.config}  |   0
 configs/pc_x86_64_bios_defconfig                   |   8 +-
 configs/pc_x86_64_efi_defconfig                    |   8 +-
 configs/qemu_aarch64_virt_defconfig                |   2 +-
 configs/qemu_arm_versatile_defconfig               |   8 +-
 configs/qemu_arm_vexpress_defconfig                |   6 +-
 configs/qemu_m68k_mcf5208_defconfig                |  10 +--
 configs/qemu_m68k_q800_defconfig                   |   8 +-
 configs/qemu_microblazebe_mmu_defconfig            |   8 +-
 configs/qemu_microblazeel_mmu_defconfig            |   8 +-
 configs/qemu_mips64_malta_defconfig                |   8 +-
 configs/qemu_mips64el_malta_defconfig              |   8 +-
 configs/qemu_mips_malta_defconfig                  |   8 +-
 configs/qemu_mipsel_malta_defconfig                |   8 +-
 configs/qemu_ppc64_pseries_defconfig               |   6 +-
 configs/qemu_ppc_g3beige_defconfig                 |   8 +-
 configs/qemu_ppc_mpc8544ds_defconfig               |   8 +-
 configs/qemu_ppc_virtex_ml507_defconfig            |   8 +-
 configs/qemu_sh4_r2d_defconfig                     |   8 +-
 configs/qemu_sh4eb_r2d_defconfig                   |   8 +-
 configs/qemu_sparc64_sun4u_defconfig               |   8 +-
 configs/qemu_sparc_ss10_defconfig                  |   8 +-
 configs/qemu_x86_64_defconfig                      |   8 +-
 configs/qemu_x86_defconfig                         |   8 +-
 configs/qemu_xtensa_lx60_defconfig                 |   2 +-
 configs/qemu_xtensa_lx60_nommu_defconfig           |   2 +-
 45 files changed, 90 insertions(+), 192 deletions(-)
 rename board/qemu/arm-versatile/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/m68k-mcf5208/{linux-4.5.config => linux-4.6.config} (100%)
 delete mode 100644 board/qemu/m68k-mcf5208/patches/linux/0001-fix-do_sigreturn.patch
 rename board/qemu/m68k-q800/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/microblazebe-mmu/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/microblazeel-mmu/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/mips-malta/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/mips64-malta/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/mips64el-malta/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/mipsel-malta/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/ppc-g3beige/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/ppc-mpc8544ds/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/ppc-virtex-ml507/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/sh4-r2d/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/sh4eb-r2d/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/sparc-ss10/{linux-4.5.config => linux-4.6.config} (100%)
 rename board/qemu/sparc64-sun4u/{linux-4.5.config => linux-4.6.config} (100%)
 delete mode 120000 board/qemu/x86/linux-4.5.config
 create mode 120000 board/qemu/x86/linux-4.6.config
 rename board/qemu/x86_64/{linux-4.5.config => linux-4.6.config} (100%)

board/qemu/arm-versatile/linux-4.6.config renamed from board/qemu/arm-versatile/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/arm-versatile/linux-4.5.config
rename to board/qemu/arm-versatile/linux-4.6.config

board/qemu/m68k-mcf5208/linux-4.6.config renamed from board/qemu/m68k-mcf5208/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/m68k-mcf5208/linux-4.5.config
rename to board/qemu/m68k-mcf5208/linux-4.6.config

board/qemu/m68k-mcf5208/patches/linux/0001-fix-do_sigreturn.patch deleted +0 ~~-100~~

100 lines not on this page · raw message

board/qemu/m68k-q800/linux-4.6.config renamed from board/qemu/m68k-q800/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/m68k-q800/linux-4.5.config
rename to board/qemu/m68k-q800/linux-4.6.config

board/qemu/microblazebe-mmu/linux-4.6.config renamed from board/qemu/microblazebe-mmu/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.5.config
rename to board/qemu/microblazebe-mmu/linux-4.6.config

board/qemu/microblazeel-mmu/linux-4.6.config renamed from board/qemu/microblazeel-mmu/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.5.config
rename to board/qemu/microblazeel-mmu/linux-4.6.config

board/qemu/mips-malta/linux-4.6.config renamed from board/qemu/mips-malta/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/mips-malta/linux-4.5.config
rename to board/qemu/mips-malta/linux-4.6.config

board/qemu/mips64-malta/linux-4.6.config renamed from board/qemu/mips64-malta/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/mips64-malta/linux-4.5.config
rename to board/qemu/mips64-malta/linux-4.6.config

board/qemu/mips64el-malta/linux-4.6.config renamed from board/qemu/mips64el-malta/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.5.config
rename to board/qemu/mips64el-malta/linux-4.6.config

board/qemu/mipsel-malta/linux-4.6.config renamed from board/qemu/mipsel-malta/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/mipsel-malta/linux-4.5.config
rename to board/qemu/mipsel-malta/linux-4.6.config

board/qemu/ppc-g3beige/linux-4.6.config renamed from board/qemu/ppc-g3beige/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.5.config
rename to board/qemu/ppc-g3beige/linux-4.6.config

board/qemu/ppc-mpc8544ds/linux-4.6.config renamed from board/qemu/ppc-mpc8544ds/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/ppc-mpc8544ds/linux-4.5.config
rename to board/qemu/ppc-mpc8544ds/linux-4.6.config

board/qemu/ppc-virtex-ml507/linux-4.6.config renamed from board/qemu/ppc-virtex-ml507/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/ppc-virtex-ml507/linux-4.5.config
rename to board/qemu/ppc-virtex-ml507/linux-4.6.config

board/qemu/sh4-r2d/linux-4.6.config renamed from board/qemu/sh4-r2d/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.5.config
rename to board/qemu/sh4-r2d/linux-4.6.config

board/qemu/sh4eb-r2d/linux-4.6.config renamed from board/qemu/sh4eb-r2d/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.5.config
rename to board/qemu/sh4eb-r2d/linux-4.6.config

board/qemu/sparc-ss10/linux-4.6.config renamed from board/qemu/sparc-ss10/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.5.config
rename to board/qemu/sparc-ss10/linux-4.6.config

board/qemu/sparc64-sun4u/linux-4.6.config renamed from board/qemu/sparc64-sun4u/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/sparc64-sun4u/linux-4.5.config
rename to board/qemu/sparc64-sun4u/linux-4.6.config

board/qemu/x86/linux-4.5.config deleted +0 -1

deleted file mode 120000
index 735bcf7..0000000
@@ -1 +0,0 @@
-../x86_64/linux-4.5.config
\ No newline at end of file

board/qemu/x86/linux-4.6.config new file +1 -0

new file mode 120000
index 0000000..62e694f
@@ -0,0 +1 @@
+../x86_64/linux-4.6.config
\ No newline at end of file

board/qemu/x86_64/linux-4.6.config renamed from board/qemu/x86_64/linux-4.5.config +0 -0

similarity index 100%
rename from board/qemu/x86_64/linux-4.5.config
rename to board/qemu/x86_64/linux-4.6.config

configs/pc_x86_64_bios_defconfig +4 -4

index c3a1a35..e47ae3e 100644
@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/pc_x86_64_efi_defconfig +4 -4

index 3152115..9b15495 100644
@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/qemu_aarch64_virt_defconfig +1 -1

index acd9280..d540bf5 100644
@@ -15,6 +15,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.5.config"

configs/qemu_arm_versatile_defconfig +4 -4

index 444cc20..f219ebf 100644
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.6.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"

configs/qemu_arm_vexpress_defconfig +3 -3

index ebe6bca..65fa3be 100644
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"

configs/qemu_m68k_mcf5208_defconfig +4 -6

index 31db912..babde74 100644
@@ -9,17 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_INITRAMFS=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-BR2_GLOBAL_PATCH_DIR="board/qemu/m68k-mcf5208/patches/"
-
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_m68k_q800_defconfig +4 -4

index e1df89d..f23fe9f 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_microblazebe_mmu_defconfig +4 -4

index dc6e9cb..32a6d65 100644
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.6.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

configs/qemu_microblazeel_mmu_defconfig +4 -4

index 519c4be..5725ad6 100644
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.6.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

configs/qemu_mips64_malta_defconfig +4 -4

index 02e5300..6d1e207 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips64el_malta_defconfig +4 -4

index 9bbf691..a4b638a 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips_malta_defconfig +4 -4

index 26c729d..66b67a5 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mipsel_malta_defconfig +4 -4

index 3b3911b..4e4f838 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc64_pseries_defconfig +3 -3

index a7a6b7a..133c977 100644
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

configs/qemu_ppc_g3beige_defconfig +4 -4

index 6e10f06..bb4e681 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_mpc8544ds_defconfig +4 -4

index 4c112ad..9131855 100644
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_virtex_ml507_defconfig +4 -4

index 4c029a3..ec39f1d 100644
@@ -6,8 +6,8 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y

@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.6.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"

configs/qemu_sh4_r2d_defconfig +4 -4

index 7df8e84..0a48ca2 100644
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.6.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sh4eb_r2d_defconfig +4 -4

index 9bf21fd..f0844a0 100644
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.6.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc64_sun4u_defconfig +4 -4

index f7e0749..12c0358 100644
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.6.config"

configs/qemu_sparc_ss10_defconfig +4 -4

index c88654a..7d24905 100644
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.6.config"

configs/qemu_x86_64_defconfig +4 -4

index c3c2c3d..8972ed9 100644
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"

configs/qemu_x86_defconfig +4 -4

index f7d757d..658beb1 100644
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.6.config"

configs/qemu_xtensa_lx60_defconfig +1 -1

index c46610a..0d439af 100644
@@ -22,7 +22,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.4.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y

configs/qemu_xtensa_lx60_nommu_defconfig +1 -1

index 7880a6c..ebd3cd3 100644
@@ -26,7 +26,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.4-nommu.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y

Signature · 1 line

2.7.3

Waldemar Brodkorb

2016-06-04 22:14 UTC #1 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Hi,
Gustavo Zacarias wrote,

Quoted 31 lines

Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig Kernel Qemu Network Status
--------------------------------------------------------------

aarch64_virt            4.5.6   2.5.0           YES     OK (4)
arm_versatile           4.6.1   2.5.0           YES     OK
arm_vexpress            4.6.1   2.5.0           YES     OK
m68k_mcf5208            4.6.1   2.5.0           YES     OK
m68k_q800               4.6.1   q800-v2.4.0     NO (3)  OK
microblazebe            4.6.1   2.5.0           YES     OK
microblazeel            4.6.1   2.5.0           YES     OK
mips64el_malta          4.6.1   2.5.0           YES     OK
mips64_malta            4.6.1   2.5.0           YES     OK
mipsel_malta            4.6.1   2.5.0           YES     OK
mips_malta              4.6.1   2.5.0           YES     OK
ppc_g3beige             4.6.1   2.5.0           YES     OK
ppc_mpc8544ds           4.6.1   2.5.0           YES     OK
ppc_virtex_ml507        4.6.1   2.5.0           NO      OK
ppc64_pseries           4.6.1   2.5.0           YES     OK
sh4                     4.6.1   2.5.0           YES     OK
sh4eb                   4.6.1   2.5.0           NO (1)  OK
sparc_ss10              4.6.1   2.5.0           YES     OK
sparc64_sun4u           4.6.1   2.5.0           YES     OK
sparc_sun4u             4.6.1   2.5.0           YES     OK
x86                     4.6.1   2.5.0           YES     OK
x86_64                  4.6.1   2.5.0           YES     OK
xtensa_lx60             4.4.12  2.5.0           YES     OK (2)
xtensa_lx60_nommu       4.4.12  2.5.0           YES     OK (2)

Quoted 2 lines

(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5/4.6

I have no issues with ethernet in 4.6.1 when using ml605 instead of lx60 (tested with Qemu 2.6.0). Should we switch?

best regards
Waldemar

Gustavo Zacarias

author

2016-06-05 12:33 UTC #2 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Quoted 5 lines · Waldemar Brodkorb

I have no issues with ethernet in 4.6.1 when using ml605 instead of lx60 (tested with Qemu 2.6.0). Should we switch?
best regards
Waldemar

Hi.
Do you know if the machine switch fixes it or the latest qemu version does? If it's the machine switch that would be fine, however asking for latest qemu might not be such a great idea since distributions lag quite a bit. Regards.

Waldemar Brodkorb

2016-06-05 13:31 UTC #3 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Hi,
Gustavo Zacarias wrote,

Quoted 5 lines · Waldemar Brodkorb

Quoted 4 lines
I have no issues with ethernet in 4.6.1 when using ml605 instead of lx60 (tested with Qemu 2.6.0). Should we switch?

Quoted 8 lines

Quoted 2 lines
best regards
Waldemar
Hi.
Do you know if the machine switch fixes it or the latest qemu version does? If it's the machine switch that would be fine, however asking for latest qemu might not be such a great idea since distributions lag quite a bit. Regards.

Okay, bad news. It is the latest qemu version fixing it.

Does any distribution have Qemu 2.5 included?

best regards
Waldemar

Gustavo Zacarias

author

2016-06-05 13:32 UTC #4 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Quoted 6 lines · Waldemar Brodkorb

Okay, bad news. It is the latest qemu version fixing it.
Does any distribution have Qemu 2.5 included?
best regards
Waldemar

Hi.
Ubuntu 16.04 (LTS) has 2.5 which is my current testbed. Regards.

Max Filippov

2016-06-06 02:06 UTC #5 lore raw

PATCH 1/1 configs/qemu: bump to latest version

In reply to Gustavo Zacarias

Quoted 10 lines · Gustavo Zacarias

Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
xtensa_lx60             4.4.12  2.5.0           YES     OK (2)
xtensa_lx60_nommu       4.4.12  2.5.0           YES     OK (2)
(2) - xtensa ethernet broken in 4.5/4.6

The issue is actually in QEMU and it's fixed in 2.5.0.

Signature · 2 lines

Thanks.
-- Max

Max Filippov

2016-06-06 02:07 UTC #6 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Quoted 6 lines · Max Filippov

Quoted 4 lines · Gustavo Zacarias
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:

Quoted 8 lines

Quoted 6 lines
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
xtensa_lx60             4.4.12  2.5.0           YES     OK (2)
xtensa_lx60_nommu       4.4.12  2.5.0           YES     OK (2)
(2) - xtensa ethernet broken in 4.5/4.6
The issue is actually in QEMU and it's fixed in 2.5.0.

Ugh, 2.6.0. Read the rest of the thread, sorry for the noise.

Signature · 2 lines

Thanks.
-- Max

Gustavo Zacarias

author

2016-06-06 23:24 UTC #7 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Quoted 5 lines · Max Filippov

Quoted 3 lines
Quoted 1 line
(2) - xtensa ethernet broken in 4.5/4.6
The issue is actually in QEMU and it's fixed in 2.5.0.
Ugh, 2.6.0. Read the rest of the thread, sorry for the noise.

Hi Max.
Since currently the complete testing setup requires manual handling of qemu (m68k_q800 needs a special version) you're the swing vote, either keep on 4.4.x kernels or ask for 2.6.0 qemu for this particular cases. What do you think would be best?
Regards.

Max Filippov

2016-06-07 03:16 UTC #8 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Hi Gustavo,

Quoted 9 lines · Gustavo Zacarias

Quoted 3 lines · Max Filippov
Quoted 2 lines
Quoted 1 line
(2) - xtensa ethernet broken in 4.5/4.6
The issue is actually in QEMU and it's fixed in 2.5.0.
Ugh, 2.6.0. Read the rest of the thread, sorry for the noise.
Since currently the complete testing setup requires manual handling of qemu (m68k_q800 needs a special version) you're the swing vote, either keep on 4.4.x kernels or ask for 2.6.0 qemu for this particular cases. What do you think would be best?

I see no point in staying with 4.4.x kernels as they'll only get stable updates, which is not very interesting, so I'd vote for the latest qemu and kernels.

Signature · 2 lines

Thanks.
-- Max

Gustavo Zacarias

author

2016-06-07 10:43 UTC #9 lore raw

PATCH 1/1 configs/qemu: bump to latest version

Quoted 3 lines · Max Filippov

I see no point in staying with 4.4.x kernels as they'll only get stable updates, which is not very interesting, so I'd vote for the latest qemu and kernels.

Hi Max.
I'll respin the bump with that change then, thanks. Regards.