bpftool: Query only cgroup-related attach types
PATCH 1/1 bpftool: Query only cgroup-related attach types
When CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:
$ bpftool cgroup tree /sys/fs/cgroup CgroupPath ID AttachType AttachFlags Name Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or address
From strace and kernel tracing, I found netkit returned ENXIO and this command failed. I think this AttachType(BPF_NETKIT_PRIMARY) is not relevant to cgroup.
bpftool-cgroup should query just only cgroup-related attach types.
--- tools/bpf/bpftool/cgroup.c | 47 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-)
tools/bpf/bpftool/cgroup.c +41 -6
@@ -19,6 +19,39 @@#include "main.h" +static const bool cgroup_attach_types[] = { + [BPF_CGROUP_INET_INGRESS ] = true, + [BPF_CGROUP_INET_EGRESS ] = true, + [BPF_CGROUP_INET_SOCK_CREATE ] = true, + [BPF_CGROUP_INET_SOCK_RELEASE ] = true, + [BPF_CGROUP_INET4_BIND ] = true, + [BPF_CGROUP_INET6_BIND ] = true, + [BPF_CGROUP_INET4_POST_BIND ] = true, + [BPF_CGROUP_INET6_POST_BIND ] = true, + [BPF_CGROUP_INET4_CONNECT ] = true, + [BPF_CGROUP_INET6_CONNECT ] = true, + [BPF_CGROUP_UNIX_CONNECT ] = true, + [BPF_CGROUP_INET4_GETPEERNAME ] = true, + [BPF_CGROUP_INET6_GETPEERNAME ] = true, + [BPF_CGROUP_UNIX_GETPEERNAME ] = true, + [BPF_CGROUP_INET4_GETSOCKNAME ] = true, + [BPF_CGROUP_INET6_GETSOCKNAME ] = true, + [BPF_CGROUP_UNIX_GETSOCKNAME ] = true, + [BPF_CGROUP_UDP4_SENDMSG ] = true, + [BPF_CGROUP_UDP6_SENDMSG ] = true, + [BPF_CGROUP_UNIX_SENDMSG ] = true, + [BPF_CGROUP_UDP4_RECVMSG ] = true, + [BPF_CGROUP_UDP6_RECVMSG ] = true, + [BPF_CGROUP_UNIX_RECVMSG ] = true, + [BPF_CGROUP_SOCK_OPS ] = true, + [BPF_CGROUP_DEVICE ] = true, + [BPF_CGROUP_SYSCTL ] = true, + [BPF_CGROUP_GETSOCKOPT ] = true, + [BPF_CGROUP_SETSOCKOPT ] = true, + [BPF_LSM_CGROUP ] = true, + [__MAX_BPF_ATTACH_TYPE] = false, +}; +#define HELP_SPEC_ATTACH_FLAGS \ "ATTACH_FLAGS := { multi | override }"
@@ -187,14 +220,16 @@ static int cgroup_has_attached_progs(int cgroup_fd)bool no_prog = true;for (type =0 ; type < __MAX_BPF_ATTACH_TYPE; type++) { -int count =count_attached_bpf_progs (cgroup_fd, type); +if (cgroup_attach_types[type]) { +int count =count_attached_bpf_progs (cgroup_fd, type); -if (count <0 && errno !=EINVAL ) -return -1 ; +if (count <0 && errno !=EINVAL ) +return -1 ; -if (count >0 ) { - no_prog = false; -break ; +if (count >0 ) { + no_prog = false; +break ; + } } }
Signature · 1 line
2.43.0
Quentin Monnet
maintainerQuoted 48 lines · Kenta Tada
When
CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:$ bpftool cgroup tree /sys/fs/cgroup CgroupPath ID AttachType AttachFlags Name Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or addressFrom strace and kernel tracing, I found netkit returned ENXIO and this command failed. I think this
AttachType(BPF_NETKIT_PRIMARY)is not relevant to cgroup.bpftool-cgroup should query just only cgroup-related attach types.
Signed-off-by Kenta Tada <[email protected]>--- tools/bpf/bpftool/cgroup.c | 47 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-)tools/bpf/bpftool/cgroup.c +22
-0@@ -19,6 +19,39 @@#include "main.h" +static const bool cgroup_attach_types[] = { + [BPF_CGROUP_INET_INGRESS ] = true, + [BPF_CGROUP_INET_EGRESS ] = true, + [BPF_CGROUP_INET_SOCK_CREATE ] = true, + [BPF_CGROUP_INET_SOCK_RELEASE ] = true, + [BPF_CGROUP_INET4_BIND ] = true, + [BPF_CGROUP_INET6_BIND ] = true, + [BPF_CGROUP_INET4_POST_BIND ] = true, + [BPF_CGROUP_INET6_POST_BIND ] = true, + [BPF_CGROUP_INET4_CONNECT ] = true, + [BPF_CGROUP_INET6_CONNECT ] = true, + [BPF_CGROUP_UNIX_CONNECT ] = true, + [BPF_CGROUP_INET4_GETPEERNAME ] = true, + [BPF_CGROUP_INET6_GETPEERNAME ] = true, + [BPF_CGROUP_UNIX_GETPEERNAME ] = true, + [BPF_CGROUP_INET4_GETSOCKNAME ] = true, + [BPF_CGROUP_INET6_GETSOCKNAME ] = true, + [BPF_CGROUP_UNIX_GETSOCKNAME ] = true, + [BPF_CGROUP_UDP4_SENDMSG ] = true, + [BPF_CGROUP_UDP6_SENDMSG ] = true, + [BPF_CGROUP_UNIX_SENDMSG ] = true, + [BPF_CGROUP_UDP4_RECVMSG ] = true,
tools/bpf/bpftool/cgroup.c line 53
Quoted 10 lines
tools/bpf/bpftool/cgroup.c +10
-0+ [BPF_CGROUP_UDP6_RECVMSG] = true, + [BPF_CGROUP_UNIX_RECVMSG] = true, + [BPF_CGROUP_SOCK_OPS] = true, + [BPF_CGROUP_DEVICE] = true, + [BPF_CGROUP_SYSCTL] = true, + [BPF_CGROUP_GETSOCKOPT] = true, + [BPF_CGROUP_SETSOCKOPT] = true, + [BPF_LSM_CGROUP] = true, + [__MAX_BPF_ATTACH_TYPE] = false, +};
Thanks for this!
I can't say I'm glad to see another version of the list of cgroup-related attach types (in addition to HELP_SPEC_ATTACH_TYPES and to the manual page). But the alternative would be to explicitly skip BPF_NETKIT_PRIMARY, which is not great, either. Too bad we don't have a way to check whether the type is cgroup-related in libbpf or from the bpf.h headers; but I don't think there's much interest to add it there, so we'll probably have the array. We should account for it in tools/testing/selftests/bpf/test_bpftool_synctypes.py, but I can do this as a follow-up if you don't feel like messing up with the Python script.
tools/bpf/bpftool/cgroup.c static int cgroup_has_attached_progs(int cgroup_fd) · line 223
Quoted 10 lines
tools/bpf/bpftool/cgroup.c +2
-1+#define HELP_SPEC_ATTACH_FLAGS \ "ATTACH_FLAGS := { multi | override }"@@ -187,14 +220,16 @@ static int cgroup_has_attached_progs(int cgroup_fd)bool no_prog = true;for (type =0 ; type < __MAX_BPF_ATTACH_TYPE; type++) { -int count =count_attached_bpf_progs (cgroup_fd, type); +if (cgroup_attach_types[type]) {
Please change here:
int count;
if (!cgroup_attach_types[type])
continue;And no need to further indent the rest of the block.
Quoted 17 lines
tools/bpf/bpftool/cgroup.c +7
-5+int count =count_attached_bpf_progs (cgroup_fd, type); -if (count <0 && errno !=EINVAL ) -return -1 ; +if (count <0 && errno !=EINVAL ) +return -1 ; -if (count >0 ) { - no_prog = false; -break ; +if (count >0 ) { + no_prog = false; +break ; + } } }
Quoted 63 lines · Quentin Monnet
Quoted 48 lines · Kenta Tada
When
CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:$ bpftool cgroup tree /sys/fs/cgroup CgroupPath ID AttachType AttachFlags Name Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or addressFrom strace and kernel tracing, I found netkit returned ENXIO and this command failed. I think this
AttachType(BPF_NETKIT_PRIMARY)is not relevant to cgroup.bpftool-cgroup should query just only cgroup-related attach types.
Signed-off-by Kenta Tada <[email protected]>--- tools/bpf/bpftool/cgroup.c | 47 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-)tools/bpf/bpftool/cgroup.c +22
-0@@ -19,6 +19,39 @@#include "main.h" +static const bool cgroup_attach_types[] = { + [BPF_CGROUP_INET_INGRESS ] = true, + [BPF_CGROUP_INET_EGRESS ] = true, + [BPF_CGROUP_INET_SOCK_CREATE ] = true, + [BPF_CGROUP_INET_SOCK_RELEASE ] = true, + [BPF_CGROUP_INET4_BIND ] = true, + [BPF_CGROUP_INET6_BIND ] = true, + [BPF_CGROUP_INET4_POST_BIND ] = true, + [BPF_CGROUP_INET6_POST_BIND ] = true, + [BPF_CGROUP_INET4_CONNECT ] = true, + [BPF_CGROUP_INET6_CONNECT ] = true, + [BPF_CGROUP_UNIX_CONNECT ] = true, + [BPF_CGROUP_INET4_GETPEERNAME ] = true, + [BPF_CGROUP_INET6_GETPEERNAME ] = true, + [BPF_CGROUP_UNIX_GETPEERNAME ] = true, + [BPF_CGROUP_INET4_GETSOCKNAME ] = true, + [BPF_CGROUP_INET6_GETSOCKNAME ] = true, + [BPF_CGROUP_UNIX_GETSOCKNAME ] = true, + [BPF_CGROUP_UDP4_SENDMSG ] = true, + [BPF_CGROUP_UDP6_SENDMSG ] = true, + [BPF_CGROUP_UNIX_SENDMSG ] = true, + [BPF_CGROUP_UDP4_RECVMSG ] = true,tools/bpf/bpftool/cgroup.c line 53
Quoted 10 lines
tools/bpf/bpftool/cgroup.c +10
-0+ [BPF_CGROUP_UDP6_RECVMSG] = true, + [BPF_CGROUP_UNIX_RECVMSG] = true, + [BPF_CGROUP_SOCK_OPS] = true, + [BPF_CGROUP_DEVICE] = true, + [BPF_CGROUP_SYSCTL] = true, + [BPF_CGROUP_GETSOCKOPT] = true, + [BPF_CGROUP_SETSOCKOPT] = true, + [BPF_LSM_CGROUP] = true, + [__MAX_BPF_ATTACH_TYPE] = false, +};Thanks for this!
Quoted 9 lines
I can't say I'm glad to see another version of the list of cgroup-related attach types (in addition to
HELP_SPEC_ATTACH_TYPESand to the manual page). But the alternative would be to explicitly skipBPF_NETKIT_PRIMARY, which is not great, either. Too bad we don't have a way to check whether the type is cgroup-related in libbpf or from thebpf.hheaders; but I don't think there's much interest to add it there, so we'll probably have the array. We should account for it intools/testing/selftests/bpf/test_bpftool_synctypes.py, but I can do this as a follow-up if you don't feel like messing up with the Python script.
I think some bpf management tools require how to get cgroup-related attach types. So I'm interested in adding the new API to check whether the type is cgroup-related in libbpf.
Thank you for the information about test_bpftool_synctypes.py.
BTW, I'm getting some syntax warnings when I use test_bpftool_synctypes.py in Python 3.12. Python 3.12 changes the behavior of incorrect escape sequences.
To try test_bpftool_synctypes, I add r to the head and fix it in my local environment.
Quoted 42 lines
tools/bpf/bpftool/cgroup.c static int cgroup_has_attached_progs(int cgroup_fd) · line 223
Quoted 12 lines
tools/bpf/bpftool/cgroup.c +2
-1+#define HELP_SPEC_ATTACH_FLAGS \ "ATTACH_FLAGS := { multi | override }"@@ -187,14 +220,16 @@ static int cgroup_has_attached_progs(int cgroup_fd)bool no_prog = true;for (type =0 ; type < __MAX_BPF_ATTACH_TYPE; type++) { -int count =count_attached_bpf_progs (cgroup_fd, type); +if (cgroup_attach_types[type]) {Please change here:
int count; if (!cgroup_attach_types[type]) continue;And no need to further indent the rest of the block.
Quoted 17 lines
tools/bpf/bpftool/cgroup.c +7
-5+int count =count_attached_bpf_progs (cgroup_fd, type); -if (count <0 && errno !=EINVAL ) -return -1 ; +if (count <0 && errno !=EINVAL ) +return -1 ; -if (count >0 ) { - no_prog = false; -break ; +if (count >0 ) { + no_prog = false; +break ; + } } }
Quoted 64 lines · Kenta Tada
When
CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:$ bpftool cgroup tree /sys/fs/cgroup CgroupPath ID AttachType AttachFlags Name Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or addressFrom strace and kernel tracing, I found netkit returned ENXIO and this command failed. I think this
AttachType(BPF_NETKIT_PRIMARY)is not relevant to cgroup.bpftool-cgroup should query just only cgroup-related attach types.
Signed-off-by Kenta Tada <[email protected]>--- tools/bpf/bpftool/cgroup.c | 47 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-)tools/bpf/bpftool/cgroup.c +33
-0@@ -19,6 +19,39 @@#include "main.h" +static const bool cgroup_attach_types[] = { + [BPF_CGROUP_INET_INGRESS ] = true, + [BPF_CGROUP_INET_EGRESS ] = true, + [BPF_CGROUP_INET_SOCK_CREATE ] = true, + [BPF_CGROUP_INET_SOCK_RELEASE ] = true, + [BPF_CGROUP_INET4_BIND ] = true, + [BPF_CGROUP_INET6_BIND ] = true, + [BPF_CGROUP_INET4_POST_BIND ] = true, + [BPF_CGROUP_INET6_POST_BIND ] = true, + [BPF_CGROUP_INET4_CONNECT ] = true, + [BPF_CGROUP_INET6_CONNECT ] = true, + [BPF_CGROUP_UNIX_CONNECT ] = true, + [BPF_CGROUP_INET4_GETPEERNAME ] = true, + [BPF_CGROUP_INET6_GETPEERNAME ] = true, + [BPF_CGROUP_UNIX_GETPEERNAME ] = true, + [BPF_CGROUP_INET4_GETSOCKNAME ] = true, + [BPF_CGROUP_INET6_GETSOCKNAME ] = true, + [BPF_CGROUP_UNIX_GETSOCKNAME ] = true, + [BPF_CGROUP_UDP4_SENDMSG ] = true, + [BPF_CGROUP_UDP6_SENDMSG ] = true, + [BPF_CGROUP_UNIX_SENDMSG ] = true, + [BPF_CGROUP_UDP4_RECVMSG ] = true, + [BPF_CGROUP_UDP6_RECVMSG ] = true, + [BPF_CGROUP_UNIX_RECVMSG ] = true, + [BPF_CGROUP_SOCK_OPS ] = true, + [BPF_CGROUP_DEVICE ] = true, + [BPF_CGROUP_SYSCTL ] = true, + [BPF_CGROUP_GETSOCKOPT ] = true, + [BPF_CGROUP_SETSOCKOPT ] = true, + [BPF_LSM_CGROUP ] = true, + [__MAX_BPF_ATTACH_TYPE] = false, +}; +#define HELP_SPEC_ATTACH_FLAGS \ "ATTACH_FLAGS := { multi | override }"
tools/bpf/bpftool/cgroup.c static int cgroup_has_attached_progs(int cgroup_fd) · line 222
Quoted 3 lines
tools/bpf/bpftool/cgroup.c +0
-0@@ -187,14 +220,16 @@ static int cgroup_has_attached_progs(int cgroup_fd)bool no_prog = true;for (type =0 ; type < __MAX_BPF_ATTACH_TYPE; type++) {
instead of iterating over all possible attach types and then checking if attach type is cgroup-related, why not have an array of just cgroup attach types and iterate it directly?
pw-bot: cr
Quoted 22 lines
tools/bpf/bpftool/cgroup.c +8
-7-int count =count_attached_bpf_progs (cgroup_fd, type); +if (cgroup_attach_types[type]) { +int count =count_attached_bpf_progs (cgroup_fd, type); -if (count <0 && errno !=EINVAL ) -return -1 ; +if (count <0 && errno !=EINVAL ) +return -1 ; -if (count >0 ) { - no_prog = false; -break ; +if (count >0 ) { + no_prog = false; +break ; + } } } --2.43.0
Quoted 67 lines · Andrii Nakryiko
Quoted 66 lines · Kenta Tada
When
CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:$ bpftool cgroup tree /sys/fs/cgroup CgroupPath ID AttachType AttachFlags Name Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or addressFrom strace and kernel tracing, I found netkit returned ENXIO and this command failed. I think this
AttachType(BPF_NETKIT_PRIMARY)is not relevant to cgroup.bpftool-cgroup should query just only cgroup-related attach types.
Signed-off-by Kenta Tada <[email protected]>--- tools/bpf/bpftool/cgroup.c | 47 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-)tools/bpf/bpftool/cgroup.c +33
-0@@ -19,6 +19,39 @@#include "main.h" +static const bool cgroup_attach_types[] = { + [BPF_CGROUP_INET_INGRESS ] = true, + [BPF_CGROUP_INET_EGRESS ] = true, + [BPF_CGROUP_INET_SOCK_CREATE ] = true, + [BPF_CGROUP_INET_SOCK_RELEASE ] = true, + [BPF_CGROUP_INET4_BIND ] = true, + [BPF_CGROUP_INET6_BIND ] = true, + [BPF_CGROUP_INET4_POST_BIND ] = true, + [BPF_CGROUP_INET6_POST_BIND ] = true, + [BPF_CGROUP_INET4_CONNECT ] = true, + [BPF_CGROUP_INET6_CONNECT ] = true, + [BPF_CGROUP_UNIX_CONNECT ] = true, + [BPF_CGROUP_INET4_GETPEERNAME ] = true, + [BPF_CGROUP_INET6_GETPEERNAME ] = true, + [BPF_CGROUP_UNIX_GETPEERNAME ] = true, + [BPF_CGROUP_INET4_GETSOCKNAME ] = true, + [BPF_CGROUP_INET6_GETSOCKNAME ] = true, + [BPF_CGROUP_UNIX_GETSOCKNAME ] = true, + [BPF_CGROUP_UDP4_SENDMSG ] = true, + [BPF_CGROUP_UDP6_SENDMSG ] = true, + [BPF_CGROUP_UNIX_SENDMSG ] = true, + [BPF_CGROUP_UDP4_RECVMSG ] = true, + [BPF_CGROUP_UDP6_RECVMSG ] = true, + [BPF_CGROUP_UNIX_RECVMSG ] = true, + [BPF_CGROUP_SOCK_OPS ] = true, + [BPF_CGROUP_DEVICE ] = true, + [BPF_CGROUP_SYSCTL ] = true, + [BPF_CGROUP_GETSOCKOPT ] = true, + [BPF_CGROUP_SETSOCKOPT ] = true, + [BPF_LSM_CGROUP ] = true, + [__MAX_BPF_ATTACH_TYPE] = false, +}; +#define HELP_SPEC_ATTACH_FLAGS \ "ATTACH_FLAGS := { multi | override }"@@ -187,14 +220,16 @@ static int cgroup_has_attached_progs(int cgroup_fd)bool no_prog = true;
Quoted 7 lines
tools/bpf/bpftool/cgroup.c static int cgroup_has_attached_progs(int cgroup_fd) · line 222
Quoted 1 line
tools/bpf/bpftool/cgroup.c +0
-0for (type =0 ; type < __MAX_BPF_ATTACH_TYPE; type++) {instead of iterating over all possible attach types and then checking if attach type is cgroup-related, why not have an array of just cgroup attach types and iterate it directly?
pw-bot: cr
The size of the bool array is smaller than saving each attachment type as the value in an integer array. But either is fine.
I think the problem is that we don't increase the list of cgroup attach types in multiple files. Do you have any plans to add the new API to check whether the attach type is cgroup-related in libbpf? I want to call the new API in this patch.
Quoted 24 lines
Quoted 24 lines
tools/bpf/bpftool/cgroup.c +8
-7-int count =count_attached_bpf_progs (cgroup_fd, type); +if (cgroup_attach_types[type]) { +int count =count_attached_bpf_progs (cgroup_fd, type); -if (count <0 && errno !=EINVAL ) -return -1 ; +if (count <0 && errno !=EINVAL ) +return -1 ; -if (count >0 ) { - no_prog = false; -break ; +if (count >0 ) { + no_prog = false; +break ; + } } } --2.43.0
Quoted 75 lines · Kenta Tada
Quoted 73 lines · Andrii Nakryiko
Quoted 64 lines · Kenta Tada
When
CONFIG_NETKIT=y,
bpftool-cgroup shows error even if the cgroup's path is correct:$ bpftool cgroup tree /sys/fs/cgroup CgroupPath ID AttachType AttachFlags Name Error: can't query bpf programs attached to /sys/fs/cgroup: No such device or addressFrom strace and kernel tracing, I found netkit returned ENXIO and this command failed. I think this
AttachType(BPF_NETKIT_PRIMARY)is not relevant to cgroup.bpftool-cgroup should query just only cgroup-related attach types.
Signed-off-by Kenta Tada <[email protected]>--- tools/bpf/bpftool/cgroup.c | 47 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 6 deletions(-)tools/bpf/bpftool/cgroup.c +33
-0@@ -19,6 +19,39 @@#include "main.h" +static const bool cgroup_attach_types[] = { + [BPF_CGROUP_INET_INGRESS ] = true, + [BPF_CGROUP_INET_EGRESS ] = true, + [BPF_CGROUP_INET_SOCK_CREATE ] = true, + [BPF_CGROUP_INET_SOCK_RELEASE ] = true, + [BPF_CGROUP_INET4_BIND ] = true, + [BPF_CGROUP_INET6_BIND ] = true, + [BPF_CGROUP_INET4_POST_BIND ] = true, + [BPF_CGROUP_INET6_POST_BIND ] = true, + [BPF_CGROUP_INET4_CONNECT ] = true, + [BPF_CGROUP_INET6_CONNECT ] = true, + [BPF_CGROUP_UNIX_CONNECT ] = true, + [BPF_CGROUP_INET4_GETPEERNAME ] = true, + [BPF_CGROUP_INET6_GETPEERNAME ] = true, + [BPF_CGROUP_UNIX_GETPEERNAME ] = true, + [BPF_CGROUP_INET4_GETSOCKNAME ] = true, + [BPF_CGROUP_INET6_GETSOCKNAME ] = true, + [BPF_CGROUP_UNIX_GETSOCKNAME ] = true, + [BPF_CGROUP_UDP4_SENDMSG ] = true, + [BPF_CGROUP_UDP6_SENDMSG ] = true, + [BPF_CGROUP_UNIX_SENDMSG ] = true, + [BPF_CGROUP_UDP4_RECVMSG ] = true, + [BPF_CGROUP_UDP6_RECVMSG ] = true, + [BPF_CGROUP_UNIX_RECVMSG ] = true, + [BPF_CGROUP_SOCK_OPS ] = true, + [BPF_CGROUP_DEVICE ] = true, + [BPF_CGROUP_SYSCTL ] = true, + [BPF_CGROUP_GETSOCKOPT ] = true, + [BPF_CGROUP_SETSOCKOPT ] = true, + [BPF_LSM_CGROUP ] = true, + [__MAX_BPF_ATTACH_TYPE] = false, +}; +#define HELP_SPEC_ATTACH_FLAGS \ "ATTACH_FLAGS := { multi | override }"tools/bpf/bpftool/cgroup.c static int cgroup_has_attached_progs(int cgroup_fd) · line 222
Quoted 3 lines
tools/bpf/bpftool/cgroup.c +0
-0@@ -187,14 +220,16 @@ static int cgroup_has_attached_progs(int cgroup_fd)bool no_prog = true;for (type =0 ; type < __MAX_BPF_ATTACH_TYPE; type++) {instead of iterating over all possible attach types and then checking if attach type is cgroup-related, why not have an array of just cgroup attach types and iterate it directly?
Quoted 4 lines
Quoted 1 line
pw-bot: cr
The size of the bool array is smaller than saving each attachment type as the value in an integer array. But either is fine.
Those few bytes don't matter, it's about it being a cleaner approach. You only iterate meaningful types, instead of iterating everything and skipping some. In the grand scheme of things it's not that important, but I'd go with the list approach as more natural to understand.
Quoted 4 lines
I think the problem is that we don't increase the list of cgroup attach types in multiple files. Do you have any plans to add the new API to check whether the attach type is cgroup-related in libbpf? I want to call the new API in this patch.
I'm not convinced we need this API. cgroup-specific attach types are just one possible subset of attach types, not sure it's a good idea to add a dedicated filtering API for that in libbpf.
Quoted 26 lines
Quoted 25 lines
Quoted 25 lines
tools/bpf/bpftool/cgroup.c +8
-7-int count =count_attached_bpf_progs (cgroup_fd, type); +if (cgroup_attach_types[type]) { +int count =count_attached_bpf_progs (cgroup_fd, type); -if (count <0 && errno !=EINVAL ) -return -1 ; +if (count <0 && errno !=EINVAL ) +return -1 ; -if (count >0 ) { - no_prog = false; -break ; +if (count >0 ) { + no_prog = false; +break ; + } } } --2.43.0