autoboot cleanups
Subsystems (3)
v3 cover autoboot cleanups
1/6 moves CONFIG_BOOTDELAY for a new SOCFPGA board.
The rest of this series are clean-ups of autoboot code.
Masahiro Yamada (6):
ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board
doc: bootdelay: drop explanation about CONFIG_BOOTDELAY from README
autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK
autoboot: rename abortboot_{keyed, normal} to __abortboot
autoboot: move CONFIG_SILENT_CONSOLE handling
autoboot: move bootdelay >= 0 check to abortboot()
README | 17 -------- common/Kconfig | 4 +- common/autoboot.c | 49 ++++++++-------------- configs/brppt1_mmc_defconfig | 2 +- configs/brppt1_nand_defconfig | 2 +- configs/brppt1_spi_defconfig | 2 +- configs/brxre1_defconfig | 2 +- configs/cairo_defconfig | 2 +- .../controlcenterd_TRAILBLAZER_DEVELOP_defconfig | 2 +- configs/controlcenterd_TRAILBLAZER_defconfig | 2 +- configs/omap3_evm_quick_mmc_defconfig | 2 +- configs/omap3_evm_quick_nand_defconfig | 2 +- configs/socfpga_is1_defconfig | 4 +- doc/README.autoboot | 8 ---- include/configs/CPCI2DP.h | 2 - include/configs/CPCI4052.h | 2 - include/configs/MIP405.h | 1 - include/configs/PIP405.h | 1 - include/configs/PLU405.h | 1 - include/configs/PMC405DE.h | 1 - include/configs/PMC440.h | 1 - include/configs/VCMA9.h | 1 - include/configs/VOM405.h | 1 - include/configs/a3m071.h | 1 - include/configs/amcc-common.h | 1 - include/configs/apf27.h | 1 - include/configs/calimain.h | 1 - include/configs/cm_t35.h | 2 - include/configs/cm_t3517.h | 2 - include/configs/cm_t43.h | 1 - include/configs/devkit3250.h | 1 - include/configs/digsy_mtc.h | 1 - include/configs/dlvision-10g.h | 2 - include/configs/exynos-common.h | 2 - include/configs/gdppc440etx.h | 2 - include/configs/hrcon.h | 2 - include/configs/intip.h | 2 - include/configs/io.h | 2 - include/configs/io64.h | 2 - include/configs/iocon.h | 2 - include/configs/legoev3.h | 1 - include/configs/meesc.h | 2 - include/configs/omap3_logic.h | 1 - include/configs/pcm030.h | 5 --- include/configs/r7780mp.h | 3 -- include/configs/s5p_goni.h | 2 - include/configs/smdk2410.h | 1 - include/configs/smdkc100.h | 3 -- include/configs/snapper9260.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/socfpga_is1.h | 1 - include/configs/spear-common.h | 1 - include/configs/strider.h | 2 - include/configs/theadorable.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 2 - include/configs/vinco.h | 1 - include/configs/work_92105.h | 2 - include/configs/x600.h | 1 - include/configs/xilinx-ppc.h | 1 - 60 files changed, 30 insertions(+), 141 deletions(-)
Signature · 1 line
1.9.1
PATCH v3 1/6 ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board
This recently added board missed the tree-wide migration of CONFIG_BOOTDELAY.
---
Changes in v3: None
Changes in v2: None
configs/socfpga_is1_defconfig | 4 +--- include/configs/socfpga_is1.h | 1 - 2 files changed, 1 insertion(+), 4 deletions(-)
configs/socfpga_is1_defconfig +1 -3
@@ -9,14 +9,13 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_is1" CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_FIT=y +CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y -# CONFIG_CMD_MEMTEST is not set # CONFIG_CMD_FLASH is not set -# CONFIG_CMD_MMC is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y
@@ -36,7 +35,6 @@ CONFIG_SYS_I2C_DW=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_USE_4K_SECTORS=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_SYS_NS16550=y
include/configs/socfpga_is1.h +0 -1
@@ -19,7 +19,6 @@#define PHYS_SDRAM_1_SIZE 0x10000000/* Booting Linux */ -#define CONFIG_BOOTDELAY 3#define CONFIG_BOOTFILE "zImage"#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)#define CONFIG_LOADADDR 0x01000000
Signature · 1 line
1.9.1
PATCH v3 1/6 ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board
Quoted 6 lines · Masahiro Yamada
This recently added board missed the tree-wide migration of
CONFIG_BOOTDELAY.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Pavel Machek <[email protected]>Reviewed-by Heiko Schocher <[email protected]>
Thanks,
Stefan
PATCH v3 1/6 ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board
In reply to Masahiro YamadaQuoted 7 lines · Masahiro Yamada
This recently added board missed the tree-wide migration of
CONFIG_BOOTDELAY.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Pavel Machek <[email protected]>Reviewed-by Heiko Schocher <[email protected]>Reviewed-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160701/db99218b/attachment.sig>
PATCH v3 2/6 doc: bootdelay: drop explanation about CONFIG_BOOTDELAY from README
In reply to Masahiro YamadaThe same information now exists in common/Kconfig. Do not duplicate documentation from the point of view of maintainability.
---
Changes in v3: None
Changes in v2: None
README | 17 ----------------- common/Kconfig | 2 ++ 2 files changed, 2 insertions(+), 17 deletions(-)
README +0 -17
@@ -890,23 +890,6 @@ The following options need to be configured: 'Sane' compilers will generate smaller code if CONFIG_PRE_CON_BUF_SZ is a power of 2 -- Boot Delay: CONFIG_BOOTDELAY - in seconds - Delay before automatically booting the default image; - set to -1 to disable autoboot. - set to -2 to autoboot with no delay and not check for abort - (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). - - See doc/README.autoboot for these options that - work with CONFIG_BOOTDELAY. None are required. - CONFIG_BOOT_RETRY_TIME - CONFIG_BOOT_RETRY_MIN - CONFIG_AUTOBOOT_KEYED - CONFIG_AUTOBOOT_PROMPT - CONFIG_AUTOBOOT_DELAY_STR - CONFIG_AUTOBOOT_STOP_STR - CONFIG_ZERO_BOOTDELAY_CHECK - CONFIG_RESET_TO_RETRY - - Autoboot Command: CONFIG_BOOTCOMMAND Only needed when CONFIG_BOOTDELAY is enabled;
common/Kconfig +2 -0
@@ -107,6 +107,8 @@ config BOOTDELAY set to -2 to autoboot with no delay and not check for abort (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). + See doc/README.autoboot for details. + config CONSOLE_RECORD bool "Console recording" help
Signature · 1 line
1.9.1
PATCH v3 2/6 doc: bootdelay: drop explanation about CONFIG_BOOTDELAY from README
Quoted 6 lines · Masahiro Yamada
The same information now exists in common/Kconfig. Do not duplicate documentation from the point of view of maintainability.
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160701/18dc7fa9/attachment.sig>
PATCH v3 3/6 autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK
In reply to Masahiro YamadaAs the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2 means the autoboot with no delay, with no abort check even if CONFIG_ZERO_BOOTDELAY_CHECK is defined.
To sum up, the autoboot behaves as follows:
[1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y autoboot with no delay, but you can abort it by key input
[2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n autoboot with no delay, with no check for abort
[3] CONFIG_BOOTDELAY=-1
disable autoboot
[4] CONFIG_BOOTDELAY=-2
autoboot with no delay, with no check for abort
As you notice, [2] and [4] come to the same result, which means we do not need CONFIG_ZERO_BOOTDELAY_CHECK. We can control all the cases only by CONFIG_BOOTDELAY, like this:
[1] CONFIG_BOOTDELAY=0
autoboot with no delay, but you can abort it by key input
[2] CONFIG_BOOTDELAY=-1
disable autoboot
[3] CONFIG_BOOTDELAY=-2
autoboot with no delay, with no check for abort
This commit converts the logic as follow:
CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
--> CONFIG_BOOTDELAY=-2
---
Changes in v3:
- Tidy up garbages after CONFIG_ZERO_BOOTDELAY_CHECK removes
Changes in v2: None
common/Kconfig | 2 +- common/autoboot.c | 6 +----- configs/brppt1_mmc_defconfig | 2 +- configs/brppt1_nand_defconfig | 2 +- configs/brppt1_spi_defconfig | 2 +- configs/brxre1_defconfig | 2 +- configs/cairo_defconfig | 2 +- configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig | 2 +- configs/controlcenterd_TRAILBLAZER_defconfig | 2 +- configs/omap3_evm_quick_mmc_defconfig | 2 +- configs/omap3_evm_quick_nand_defconfig | 2 +- doc/README.autoboot | 8 -------- include/configs/CPCI2DP.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/MIP405.h | 1 - include/configs/PIP405.h | 1 - include/configs/PLU405.h | 1 - include/configs/PMC405DE.h | 1 - include/configs/PMC440.h | 1 - include/configs/VCMA9.h | 1 - include/configs/VOM405.h | 1 - include/configs/a3m071.h | 1 - include/configs/amcc-common.h | 1 - include/configs/apf27.h | 1 - include/configs/calimain.h | 1 - include/configs/cm_t35.h | 2 -- include/configs/cm_t3517.h | 2 -- include/configs/cm_t43.h | 1 - include/configs/devkit3250.h | 1 - include/configs/digsy_mtc.h | 1 - include/configs/dlvision-10g.h | 2 -- include/configs/exynos-common.h | 2 -- include/configs/gdppc440etx.h | 2 -- include/configs/hrcon.h | 2 -- include/configs/intip.h | 2 -- include/configs/io.h | 2 -- include/configs/io64.h | 2 -- include/configs/iocon.h | 2 -- include/configs/legoev3.h | 1 - include/configs/meesc.h | 2 -- include/configs/omap3_logic.h | 1 - include/configs/pcm030.h | 5 ----- include/configs/r7780mp.h | 3 --- include/configs/s5p_goni.h | 2 -- include/configs/smdk2410.h | 1 - include/configs/smdkc100.h | 3 --- include/configs/snapper9260.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/spear-common.h | 1 - include/configs/strider.h | 2 -- include/configs/theadorable.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 2 -- include/configs/vinco.h | 1 - include/configs/work_92105.h | 2 -- include/configs/x600.h | 1 - include/configs/xilinx-ppc.h | 1 - 57 files changed, 11 insertions(+), 93 deletions(-)
common/Kconfig +1 -1
@@ -103,9 +103,9 @@ config BOOTDELAY depends on AUTOBOOT help Delay before automatically running bootcmd; + set to 0 to autoboot with no delay, but you can stop it by key input. set to -1 to disable autoboot. set to -2 to autoboot with no delay and not check for abort - (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). See doc/README.autoboot for details.
common/autoboot.c +1 -5
@@ -187,10 +187,8 @@ static int abortboot_keyed(int bootdelay)int abort;uint64_t etime =endtick (bootdelay); -#ifndef CONFIG_ZERO_BOOTDELAY_CHECK -if (bootdelay ==0 ) +if (bootdelay <0 )return 0 ; -#endif # ifdef CONFIG_AUTOBOOT_PROMPT /*
@@ -230,7 +228,6 @@ static int abortboot_normal(int bootdelay)printf ("Hit any key to stop autoboot: %2d " , bootdelay);#endif -#if definedCONFIG_ZERO_BOOTDELAY_CHECK /* * Check if key already pressed * Don't check if bootdelay < 0
@@ -242,7 +239,6 @@ static int abortboot_normal(int bootdelay) abort =1 ;/* don't auto boot */ } } -#endif while ((bootdelay >0 ) && (!abort)) { --bootdelay;
configs/brppt1_mmc_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_TARGET_BRPPT1=y CONFIG_SPL=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/brppt1_nand_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_TARGET_BRPPT1=y CONFIG_SPL=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/brppt1_spi_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_TARGET_BRPPT1=y CONFIG_SPL=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/brxre1_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_BRXRE1=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set
configs/cairo_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_CAIRO=y CONFIG_SPL=y -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Cairo # " CONFIG_CMD_BOOTZ=y
configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP" -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set
configs/controlcenterd_TRAILBLAZER_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH" -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set
configs/omap3_evm_quick_mmc_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y CONFIG_SPL=y -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_SYS_PROMPT="OMAP3_EVM # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set
configs/omap3_evm_quick_nand_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y CONFIG_SPL=y -CONFIG_BOOTDELAY=0 +CONFIG_BOOTDELAY=-2 CONFIG_SYS_PROMPT="OMAP3_EVM # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set
doc/README.autoboot +0 -8
@@ -132,14 +132,6 @@ What they do provides an escape sequence from the limited "password" strings. - - CONFIG_ZERO_BOOTDELAY_CHECK - - If this option is defined, you can stop the autoboot process - by hitting a key even in that case when "bootdelay" has been - set to 0. You can set "bootdelay" to a negative value to - prevent the check for console input. - CONFIG_RESET_TO_RETRY (Only effective when CONFIG_BOOT_RETRY_TIME is also set)
include/configs/CPCI2DP.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1/* include version env variable */ #define CONFIG_SYS_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */
include/configs/CPCI4052.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1/* include version env variable */ #define CONFIG_SYS_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */
include/configs/MIP405.h +0 -1
@@ -99,7 +99,6 @@#define CONFIG_BAUDRATE 9600/* STD Baudrate */ /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ #define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm"/* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5"/* boot arguments */
include/configs/PIP405.h +0 -1
@@ -91,7 +91,6 @@/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ #define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm"/* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5"/* boot arguments */
include/configs/PLU405.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/PMC405DE.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */ /*
include/configs/PMC440.h +0 -1
@@ -312,7 +312,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */ /*-----------------------------------------------------------------------
include/configs/VCMA9.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_BOOT_RETRY_TIME -1#define CONFIG_RESET_TO_RETRY -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_NETMASK 255.255.255.0#define CONFIG_IPADDR 10.0.0.110
include/configs/VOM405.h +0 -1
@@ -105,7 +105,6 @@#define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/a3m071.h +0 -1
@@ -322,7 +322,6 @@*/ #undef CONFIG_BOOTARGS -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_SYS_AUTOLOAD "n"
include/configs/amcc-common.h +0 -1
@@ -78,7 +78,6 @@#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE /* include version env variable */ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
include/configs/apf27.h +0 -1
@@ -148,7 +148,6 @@#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ #define CONFIG_INITRD_TAG /* send initrd params */ -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin"#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \ __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
include/configs/calimain.h +0 -1
@@ -214,7 +214,6 @@#define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS ""#define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;" -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOT_RETRY_TIME 60/* continue boot after 60 s inactivity */ #define CONFIG_RESET_TO_RETRY
include/configs/cm_t35.h +0 -2
@@ -145,8 +145,6 @@/* devices */ /* Environment information */ -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \
include/configs/cm_t3517.h +0 -2
@@ -152,8 +152,6 @@/* devices */ /* Environment information */ -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "baudrate=115200\0" \
include/configs/cm_t43.h +0 -1
@@ -98,7 +98,6 @@#undef CONFIG_SPL_NAND_SUPPORT#undef CONFIG_SYS_MONITOR_LEN#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_ENV_SIZE (16 * 1024)#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
include/configs/devkit3250.h +0 -1
@@ -178,7 +178,6 @@*/ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTFILE "uImage"#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
include/configs/digsy_mtc.h +0 -1
@@ -379,7 +379,6 @@#define CONFIG_CMDLINE_EDITING 1#define CONFIG_MX_CYCLIC 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_SYS_CBSIZE 1024#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
include/configs/dlvision-10g.h +0 -2
@@ -27,8 +27,6 @@#define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -/* * Configure PLL */
include/configs/exynos-common.h +0 -2
@@ -51,8 +51,6 @@#define CONFIG_EXYNOS_DWMMC #define CONFIG_BOUNCE_BUFFER -#define CONFIG_ZERO_BOOTDELAY_CHECK -/* PWM */ #define CONFIG_PWM
include/configs/gdppc440etx.h +0 -2
@@ -33,8 +33,6 @@#define CONFIG_BOARD_EARLY_INIT_F 1/* call board_early_init_f*/ #define CONFIG_MISC_INIT_R 1/* call misc_init_r() */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses)
include/configs/hrcon.h +0 -2
@@ -543,8 +543,6 @@ void fpga_control_clear(unsigned int bus, int pin);#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_CONSOLE_INFO_QUIET
include/configs/intip.h +0 -2
@@ -48,8 +48,6 @@#define CONFIG_BOARD_TYPES 1/* support board types */ #define CFG_ALT_MEMTEST -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses)
include/configs/io.h +0 -2
@@ -33,8 +33,6 @@#define PLLMR0_DEFAULT PLLMR0_266_133_66#define PLLMR1_DEFAULT PLLMR1_266_133_66 -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -/* new uImage format support */ #define CONFIG_FIT_DISABLE_SHA256
include/configs/io64.h +0 -2
@@ -44,8 +44,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -/*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses)
include/configs/iocon.h +0 -2
@@ -35,8 +35,6 @@#define PLLMR0_DEFAULT PLLMR0_266_133_66#define PLLMR1_DEFAULT PLLMR1_266_133_66 -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -/* new uImage format support */ #define CONFIG_FIT_DISABLE_SHA256
include/configs/legoev3.h +0 -1
@@ -168,7 +168,6 @@#define CONFIG_SERIAL_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SETUP_INITRD_TAG -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTCOMMAND \ "if mmc rescan; then " \ "if run loadbootscr; then " \
include/configs/meesc.h +0 -2
@@ -69,8 +69,6 @@#define CONFIG_USART_ID ATMEL_ID_SYS#define CONFIG_BAUDRATE 115200 -#define CONFIG_ZERO_BOOTDELAY_CHECK -/* * BOOTP options */
include/configs/omap3_logic.h +0 -1
@@ -47,7 +47,6 @@#define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_EDITING /* cmd line edit/history */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */ /* Hardware drivers */
include/configs/pcm030.h +0 -5
@@ -67,11 +67,6 @@ Serial console configuration#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \ "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)" -/*----------------------------------------------------------------------------- -Autobooting ------------------------------------------------------------------------------*/ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */ -/* even with bootdelay=0 */ #undef CONFIG_BOOTARGS#define CONFIG_PREBOOT "echo;" \
include/configs/r7780mp.h +0 -3
@@ -31,9 +31,6 @@#define CONFIG_BOOTARGS "console=ttySC0,115200"#define CONFIG_ENV_OVERWRITE 1 -/* check for keypress on bootdelay==0 */ -/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ -#define CONFIG_SYS_TEXT_BASE 0x0FFC0000#define CONFIG_SYS_SDRAM_BASE (0x08000000)#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
include/configs/s5p_goni.h +0 -2
@@ -94,8 +94,6 @@",12m(modem)" \",60m(qboot)\0" -#define CONFIG_ZERO_BOOTDELAY_CHECK - /* partitions definitions */#define PARTS_CSA "csa-mmc"#define PARTS_BOOTLOADER "u-boot"
include/configs/smdk2410.h +0 -1
@@ -82,7 +82,6 @@/* autoboot */ #define CONFIG_BOOT_RETRY_TIME -1#define CONFIG_RESET_TO_RETRY -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_NETMASK 255.255.255.0#define CONFIG_IPADDR 10.0.0.110
include/configs/smdkc100.h +0 -3
@@ -71,9 +71,6 @@#define CONFIG_CMD_ONENAND #define CONFIG_CMD_MTDPARTS - -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS
include/configs/snapper9260.h +0 -1
@@ -117,7 +117,6 @@/* Boot options */ #define CONFIG_SYS_LOAD_ADDR 0x23000000 -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH
include/configs/snapper9g45.h +0 -1
@@ -95,7 +95,6 @@/* Boot options */ #define CONFIG_SYS_LOAD_ADDR 0x23000000 -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH
include/configs/spear-common.h +0 -1
@@ -178,7 +178,6 @@#define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_MISC_INIT_R -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x04000000
include/configs/strider.h +0 -2
@@ -581,8 +581,6 @@ void fpga_control_clear(unsigned int bus, int pin);#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* ignore keypress on bootdelay==0 */ -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_CONSOLE_INFO_QUIET
include/configs/theadorable.h +0 -1
@@ -64,7 +64,6 @@#define PHY_ANEG_TIMEOUT 8000/* PHY needs a longer aneg time */ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_PREBOOT
include/configs/tricorder.h +0 -1
@@ -46,7 +46,6 @@#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SILENT_CONSOLE -#define CONFIG_ZERO_BOOTDELAY_CHECK /* Clock Defines */ #define V_OSCK 26000000/* Clock output from T2 */
include/configs/uniphier.h +0 -2
@@ -147,8 +147,6 @@#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -/* * Network Configuration */
include/configs/vinco.h +0 -1
@@ -150,6 +150,5 @@ "bootdelay=0\0"#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK #endif
include/configs/work_92105.h +0 -2
@@ -174,8 +174,6 @@#define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTFILE "uImage"#define CONFIG_BOOTARGS "console=ttyS2,115200n8"#define CONFIG_LOADADDR 0x80008000
include/configs/x600.h +0 -1
@@ -145,7 +145,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOARD_LATE_INIT #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x04000000
include/configs/xilinx-ppc.h +0 -1
@@ -57,7 +57,6 @@#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE /* include version env variable */ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_LOADS_ECHO /* echo on for serial download */
Signature · 1 line
1.9.1
PATCH v3 3/6 autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK
Quoted 35 lines · Masahiro Yamada
As the help message of
CONFIG_BOOTDELAYsays,CONFIG_BOOTDELAY=-2means the autoboot with no delay, with no abort check even ifCONFIG_ZERO_BOOTDELAY_CHECKis defined.To sum up, the autoboot behaves as follows:
[1]
CONFIG_BOOTDELAY=0&&CONFIG_ZERO_BOOTDELAY_CHECK=yautoboot with no delay, but you can abort it by key input[2]
CONFIG_BOOTDELAY=0&&CONFIG_ZERO_BOOTDELAY_CHECK=nautoboot with no delay, with no check for abort[3]
CONFIG_BOOTDELAY=-1
disable autoboot[4]
CONFIG_BOOTDELAY=-2
autoboot with no delay, with no check for abortAs you notice, [2] and [4] come to the same result, which means we do not need
CONFIG_ZERO_BOOTDELAY_CHECK. We can control all the cases only byCONFIG_BOOTDELAY, like this:[1]
CONFIG_BOOTDELAY=0
autoboot with no delay, but you can abort it by key input[2]
CONFIG_BOOTDELAY=-1
disable autoboot[3]
CONFIG_BOOTDELAY=-2
autoboot with no delay, with no check for abortThis commit converts the logic as follow:
CONFIG_BOOTDELAY=0&&CONFIG_ZERO_BOOTDELAY_CHECK=n--> CONFIG_BOOTDELAY=-2
Quoted 8 lines
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Stefan Roese <[email protected]>Acked-by Igor Grinberg <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Heiko Schocher <[email protected]>Acked-by Christian Riesch <[email protected]>Acked-by Hannes Schmelzer <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160701/89d7e10a/attachment.sig>
PATCH v3 4/6 autoboot: rename abortboot_{keyed, normal} to __abortboot
In reply to Masahiro YamadaBecause abortboot_keyed() and abortboot_normal() are not compiled at the same time, we can rename both of them to __abortboot(). This allows to drop #ifdef from the caller.
---
Changes in v3: None
Changes in v2: None
common/autoboot.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
common/autoboot.c +3 -7
@@ -182,7 +182,7 @@ static int passwd_abort(uint64_t etime)* Watch for 'delay' seconds for autoboot stop or autoboot delay string. * returns: 0 - no key string, allow autoboot 1 - got key string, abort */ -static int abortboot_keyed (int bootdelay) +static int __abortboot (int bootdelay) {int abort;uint64_t etime =endtick (bootdelay);
@@ -216,7 +216,7 @@ static int abortboot_keyed(int bootdelay)static int menukey;#endif -static int abortboot_normal (int bootdelay) +static int __abortboot (int bootdelay) {int abort =0 ;unsigned long ts;
@@ -274,11 +274,7 @@ static int abortboot_normal(int bootdelay)static int abortboot (int bootdelay) { -#ifdef CONFIG_AUTOBOOT_KEYED -return abortboot_keyed (bootdelay); -#else -return abortboot_normal (bootdelay); -#endif +return __abortboot (bootdelay); }static void process_fdt_options (const void *blob)
Signature · 1 line
1.9.1
PATCH v3 4/6 autoboot: rename abortboot_{keyed, normal} to __abortboot
Quoted 8 lines · Masahiro Yamada
Because
abortboot_keyed()andabortboot_normal()are not compiled at the same time, we can rename both of them to__abortboot(). This allows to drop #ifdef from the caller.Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Stefan Roese <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160701/09868592/attachment.sig>
PATCH v3 5/6 autoboot: move CONFIG_SILENT_CONSOLE handling
In reply to Masahiro YamadaFactor out the same code from the callees to the caller.
---
Changes in v3: None
Changes in v2:
- Fix build error when CONFIG_SILENT_CONSOLE is enabled
common/autoboot.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
common/autoboot.c +10 -11
@@ -202,11 +202,6 @@ static int __abortboot(int bootdelay)if (!abort)debug_bootkeys ("key timeout\n" ); -#ifdef CONFIG_SILENT_CONSOLE -if (abort) - gd->flags &= ~GD_FLG_SILENT ; -#endif -return abort; }
@@ -263,18 +258,22 @@ static int __abortboot(int bootdelay)putc ('\n' ); -#ifdef CONFIG_SILENT_CONSOLE -if (abort) - gd->flags &= ~GD_FLG_SILENT ; -#endif - return abort; }# endif /* CONFIG_AUTOBOOT_KEYED */ static int abortboot (int bootdelay) { -return __abortboot (bootdelay); +int abort; + + abort =__abortboot (bootdelay); + +#ifdef CONFIG_SILENT_CONSOLE +if (abort) + gd->flags &= ~GD_FLG_SILENT ; +#endif + +return abort; }static void process_fdt_options (const void *blob)
Signature · 1 line
1.9.1
PATCH v3 5/6 autoboot: move CONFIG_SILENT_CONSOLE handling
Quoted 6 lines · Masahiro Yamada
Factor out the same code from the callees to the caller.
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Stefan Roese <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160701/64999992/attachment.sig>
PATCH v3 6/6 autoboot: move bootdelay >= 0 check to abortboot()
In reply to Masahiro YamadaMove the bootdelay >= 0 check to the caller, which simplifies the callees.
---
Changes in v3: None
Changes in v2: None
common/autoboot.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)
common/autoboot.c +8 -14
@@ -187,9 +187,6 @@ static int __abortboot(int bootdelay)int abort;uint64_t etime =endtick (bootdelay); -if (bootdelay <0 ) -return 0 ; -# ifdef CONFIG_AUTOBOOT_PROMPT /* * CONFIG_AUTOBOOT_PROMPT includes the %d for all boards.
@@ -219,20 +216,16 @@ static int __abortboot(int bootdelay)#ifdef CONFIG_MENUPROMPT printf (CONFIG_MENUPROMPT );#else -if (bootdelay >=0 ) -printf ("Hit any key to stop autoboot: %2d " , bootdelay); +printf ("Hit any key to stop autoboot: %2d " , bootdelay);#endif /* * Check if key already pressed -* Don't check if bootdelay < 0 */ -if (bootdelay >=0 ) { -if (tstc ()) {/* we got a key press */ - (void )getc ();/* consume input */ -puts ("\b\b\b 0" ); - abort =1 ;/* don't auto boot */ - } +if (tstc ()) {/* we got a key press */ + (void )getc ();/* consume input */ +puts ("\b\b\b 0" ); + abort =1 ;/* don't auto boot */ }while ((bootdelay >0 ) && (!abort)) {
@@ -264,9 +257,10 @@ static int __abortboot(int bootdelay)static int abortboot (int bootdelay) { -int abort; +int abort =0 ; - abort =__abortboot (bootdelay); +if (bootdelay >=0 ) + abort =__abortboot (bootdelay);#ifdef CONFIG_SILENT_CONSOLE if (abort)
Signature · 1 line
1.9.1
PATCH v3 6/6 autoboot: move bootdelay >= 0 check to abortboot()
Quoted 7 lines · Masahiro Yamada
Move the bootdelay >= 0 check to the caller, which simplifies the callees.
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Stefan Roese <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160701/5e0eb5cd/attachment.sig>