Skip to contentSkip to conversation

ARM: tango: add Suspend-to-RAM support

RFC PATCH Superseded Marc Gonzalez 3 participants 6 messages Jun 29, 2016 – Jul 7, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 ARM: tango: add Suspend-to-RAM support

Ask firmware to put RAM in self-refresh mode and power system down.

echo mem > /sys/power/state

See Documentation/power/states.txt

---
This is a RFC because I have a few doubts:
1) return value when tango_suspend() fails and unexpectedly returns (I used -EIO)
2) conditionally building pm.c (using CONFIG_SUSPEND? CONFIG_PM_SLEEP? other?)
3) .valid is required, right?

---
 arch/arm/mach-tango/Makefile |  1 +
 arch/arm/mach-tango/pm.c     | 37 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-tango/smc.h    |  1 +
 3 files changed, 39 insertions(+)
 create mode 100644 arch/arm/mach-tango/pm.c
arch/arm/mach-tango/Makefile +1 -0
index 7ca753aa9fb6..822b7ca803c6 100644
@@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
 
 obj-y += setup.o smc.o xenv.o
 obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
arch/arm/mach-tango/pm.c new file +37 -0
new file mode 100644
index 000000000000..08a39beaea09
@@ -0,0 +1,37 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;
+}
+
+static int tango_pm_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = tango_pm_valid,
+};
+
+static int __init tango_pm_init(void)
+{
+	suspend_set_ops(&tango_pm_ops);
+	return 0;
+}
+
+late_initcall(tango_pm_init);
arch/arm/mach-tango/smc.h +1 -0
index 3d31f984f44c..57919539da1b 100644
@@ -3,5 +3,6 @@ extern int tango_smc(unsigned int val, unsigned int service);
 #define tango_set_l2_control(val)	tango_smc(val, 0x102)
 #define tango_start_aux_core(val)	tango_smc(val, 0x104)
 #define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_suspend(val)		tango_smc(val, 0x120)
 #define tango_aux_core_die(val)		tango_smc(val, 0x121)
 #define tango_aux_core_kill(val)	tango_smc(val, 0x122)
Signature · 1 line
2.9.0
#1 lore raw

RFC PATCH 1/1 ARM: tango: add Suspend-to-RAM support

Quoted 52 lines · Marc Gonzalez

Ask firmware to put RAM in self-refresh mode and power system down.

echo mem > /sys/power/state

See Documentation/power/states.txt

---
This is a RFC because I have a few doubts:
1) return value when tango_suspend() fails and unexpectedly returns (I used -EIO)
2) conditionally building pm.c (using CONFIG_SUSPEND? CONFIG_PM_SLEEP? other?)
3) .valid is required, right?

---
  arch/arm/mach-tango/Makefile |  1 +
  arch/arm/mach-tango/pm.c     | 37 +++++++++++++++++++++++++++++++++++++
  arch/arm/mach-tango/smc.h    |  1 +
  3 files changed, 39 insertions(+)

create mode 100644 arch/arm/mach-tango/pm.c

arch/arm/mach-tango/Makefile +1 -0
index 7ca753aa9fb6..822b7ca803c6 100644
@@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
 
  obj-y += setup.o smc.o xenv.o
  obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
arch/arm/mach-tango/pm.c new file +18 -0
new file mode 100644
index 000000000000..08a39beaea09
@@ -0,0 +1,37 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;

arch/arm/mach-tango/pm.c line 28

Quoted 10 lines
arch/arm/mach-tango/pm.c new file +10 -0
+}
+
+static int tango_pm_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = tango_pm_valid,

You can use suspend_valid_only_mem instead which does exactly same thing.

Signature · 6 lines
Regards,
Sudeep

-- 
Regards,
Sudeep
#2 lore raw

RFC PATCH v2 1/1 ARM: tango: add Suspend-to-RAM support

Ask firmware to put RAM in self-refresh mode and power system down.

echo mem > /sys/power/state

See Documentation/power/states.txt

---

This is a RFC because I have a few doubts:

1) return value when tango_suspend() fails and unexpectedly returns (I used -EIO) Is there a better error to return?

2) conditionally building pm.c (using CONFIG_SUSPEND? CONFIG_PM_SLEEP? other?) Is there a better config knob to use?

3) .valid is required, right?
AFAICS, the answer is "yes", .valid is indeed required:
("no valid callback implies that none are valid")

static bool valid_state(suspend_state_t state)

{
	/*
	 * PM_SUSPEND_STANDBY and PM_SUSPEND_MEM states need low level
	 * support and need to be valid to the low level
	 * implementation, no valid callback implies that none are valid.
	 */
	return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
}
---
 arch/arm/mach-tango/Makefile |  1 +
 arch/arm/mach-tango/pm.c     | 32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-tango/smc.h    |  1 +
 3 files changed, 34 insertions(+)
 create mode 100644 arch/arm/mach-tango/pm.c
arch/arm/mach-tango/Makefile +1 -0
index 7ca753aa9fb6..822b7ca803c6 100644
@@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
 
 obj-y += setup.o smc.o xenv.o
 obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
arch/arm/mach-tango/pm.c new file +32 -0
new file mode 100644
index 000000000000..b05c6d6f99d0
@@ -0,0 +1,32 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init tango_pm_init(void)
+{
+	suspend_set_ops(&tango_pm_ops);
+	return 0;
+}
+
+late_initcall(tango_pm_init);
arch/arm/mach-tango/smc.h +1 -0
index 3d31f984f44c..57919539da1b 100644
@@ -3,5 +3,6 @@ extern int tango_smc(unsigned int val, unsigned int service);
 #define tango_set_l2_control(val)	tango_smc(val, 0x102)
 #define tango_start_aux_core(val)	tango_smc(val, 0x104)
 #define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_suspend(val)		tango_smc(val, 0x120)
 #define tango_aux_core_die(val)		tango_smc(val, 0x121)
 #define tango_aux_core_kill(val)	tango_smc(val, 0x122)
Signature · 1 line
2.9.0
#3 lore raw

RFC PATCH v2 1/1 ARM: tango: add Suspend-to-RAM support

Quoted 91 lines · Marc Gonzalez

Ask firmware to put RAM in self-refresh mode and power system down.

echo mem > /sys/power/state

See Documentation/power/states.txt

---

This is a RFC because I have a few doubts:

1) return value when tango_suspend() fails and unexpectedly returns (I used -EIO) Is there a better error to return?

2) conditionally building pm.c (using CONFIG_SUSPEND? CONFIG_PM_SLEEP? other?) Is there a better config knob to use?

3) .valid is required, right?
AFAICS, the answer is "yes", .valid is indeed required:
("no valid callback implies that none are valid")

static bool valid_state(suspend_state_t state)

{
	/*
	 * PM_SUSPEND_STANDBY and PM_SUSPEND_MEM states need low level
	 * support and need to be valid to the low level
	 * implementation, no valid callback implies that none are valid.
	 */
	return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
}
---
 arch/arm/mach-tango/Makefile |  1 +
 arch/arm/mach-tango/pm.c     | 32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-tango/smc.h    |  1 +
 3 files changed, 34 insertions(+)
 create mode 100644 arch/arm/mach-tango/pm.c
arch/arm/mach-tango/Makefile +1 -0
index 7ca753aa9fb6..822b7ca803c6 100644
@@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
 
 obj-y += setup.o smc.o xenv.o
 obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
arch/arm/mach-tango/pm.c new file +32 -0
new file mode 100644
index 000000000000..b05c6d6f99d0
@@ -0,0 +1,32 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init tango_pm_init(void)
+{
+	suspend_set_ops(&tango_pm_ops);
+	return 0;
+}
+
+late_initcall(tango_pm_init);
arch/arm/mach-tango/smc.h +0 -0
index 3d31f984f44c..57919539da1b 100644

arch/arm/mach-tango/smc.h extern int tango_smc(unsigned int val, unsigned int service); · line 8

Quoted 6 lines
arch/arm/mach-tango/smc.h +1 -0
@@ -3,5 +3,6 @@ extern int tango_smc(unsigned int val, unsigned int service);
 #define tango_set_l2_control(val)	tango_smc(val, 0x102)
 #define tango_start_aux_core(val)	tango_smc(val, 0x104)
 #define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_suspend(val)		tango_smc(val, 0x120)
 #define tango_aux_core_die(val)		tango_smc(val, 0x121)
 #define tango_aux_core_kill(val)	tango_smc(val, 0x122)

Hello everyone,

I'll wait a few more days for comments, then I'll submit the patch to arm-soc for inclusion in v4.8 (if no issues are raised).

(I suppose the return value for tango_pm_powerdown() is not that big a deal.)

Regards.

#4 lore raw

PATCH v3 1/1 ARM: tango: add Suspend-to-RAM support

Ask firmware to put RAM in self-refresh mode and power system down.

echo mem > /sys/power/state

See Documentation/power/states.txt

---
v3 is identical to v2 minus the RFC tag
Olof, if still possible, please merge for v4.8

---
 arch/arm/mach-tango/Makefile |  1 +
 arch/arm/mach-tango/pm.c     | 32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-tango/smc.h    |  1 +
 3 files changed, 34 insertions(+)
 create mode 100644 arch/arm/mach-tango/pm.c
arch/arm/mach-tango/Makefile +1 -0
index 7ca753aa9fb6..822b7ca803c6 100644
@@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
 
 obj-y += setup.o smc.o xenv.o
 obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
arch/arm/mach-tango/pm.c new file +32 -0
new file mode 100644
index 000000000000..b05c6d6f99d0
@@ -0,0 +1,32 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init tango_pm_init(void)
+{
+	suspend_set_ops(&tango_pm_ops);
+	return 0;
+}
+
+late_initcall(tango_pm_init);
arch/arm/mach-tango/smc.h +1 -0
index 3d31f984f44c..57919539da1b 100644
@@ -3,5 +3,6 @@ extern int tango_smc(unsigned int val, unsigned int service);
 #define tango_set_l2_control(val)	tango_smc(val, 0x102)
 #define tango_start_aux_core(val)	tango_smc(val, 0x104)
 #define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_suspend(val)		tango_smc(val, 0x120)
 #define tango_aux_core_die(val)		tango_smc(val, 0x121)
 #define tango_aux_core_kill(val)	tango_smc(val, 0x122)
Signature · 1 line
2.9.0
#5 lore raw

PATCH v3 1/1 ARM: tango: add Suspend-to-RAM support

Quoted 10 lines · CEST Marc Gonzalez

Ask firmware to put RAM in self-refresh mode and power system down.

echo mem > /sys/power/state

See Documentation/power/states.txt

---
v3 is identical to v2 minus the RFC tag
Olof, if still possible, please merge for v4.8

Applied to next/soc, thanks!

Arnd