Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
Subsystems (15)
PATCH v2 39/44 Convert CONFIG_SPL_SPI_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
---
Changes in v2: None
arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-socfpga/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PA_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_SPIFLASH_defconfig | 1 + configs/P1020RDB-PD_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_SPIFLASH_defconfig | 1 + configs/P1022DS_36BIT_SPIFLASH_defconfig | 1 + configs/P1022DS_SPIFLASH_defconfig | 1 + configs/P1024RDB_SPIFLASH_defconfig | 1 + configs/P1025RDB_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_SPIFLASH_defconfig | 1 + configs/T1023RDB_SPIFLASH_defconfig | 1 + configs/T1024QDS_SPIFLASH_defconfig | 1 + configs/T1024RDB_SPIFLASH_defconfig | 1 + configs/T1040D4RDB_SPIFLASH_defconfig | 1 + configs/T1040RDB_SPIFLASH_defconfig | 1 + configs/T1042D4RDB_SPIFLASH_defconfig | 1 + configs/T1042RDB_PI_SPIFLASH_defconfig | 1 + configs/T2080QDS_SPIFLASH_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2081QDS_SPIFLASH_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_evm_nodt_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/at91sam9n12ek_spiflash_defconfig | 1 + configs/at91sam9x5ek_spiflash_defconfig | 1 + configs/axm_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/cgtqmx6eval_defconfig | 1 + configs/chromebook_jerry_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/da850_am18xxevm_defconfig | 1 + configs/da850evm_defconfig | 1 + configs/db-88f6720_defconfig | 1 + configs/db-88f6820-gp_defconfig | 1 + configs/db-mv784mp-gp_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/draco_defconfig | 1 + configs/ds414_defconfig | 1 + configs/etamin_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/ma5d4evk_defconfig | 1 + configs/maxbcm_defconfig | 1 + configs/ot1200_spl_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/sama5d2_ptc_spiflash_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + configs/sama5d3xek_spiflash_defconfig | 1 + configs/sama5d4_xplained_spiflash_defconfig | 1 + configs/sama5d4ek_spiflash_defconfig | 1 + configs/theadorable_debug_defconfig | 1 + configs/theadorable_defconfig | 1 + configs/thuban_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/am335x_evm.h | 1 - include/configs/am57xx_evm.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/bav335x.h | 1 - include/configs/brppt1.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/chromebook_jerry.h | 1 - include/configs/clearfog.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t43.h | 1 - include/configs/da850evm.h | 3 --- include/configs/db-88f6720.h | 1 - include/configs/db-88f6820-gp.h | 1 - include/configs/db-mv784mp-gp.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/ds414.h | 1 - include/configs/el6x_common.h | 1 - include/configs/ma5d4evk.h | 1 - include/configs/maxbcm.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/ot1200.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcm058.h | 1 - include/configs/sama5d2_ptc.h | 1 - include/configs/sama5d2_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/taurus.h | 1 - include/configs/theadorable.h | 1 - include/configs/ti_armv7_keystone2.h | 1 - include/configs/tqma6.h | 3 --- include/configs/zynq-common.h | 1 - 115 files changed, 77 insertions(+), 50 deletions(-)
arch/arm/cpu/armv8/zynqmp/Kconfig +3 -0
@@ -21,6 +21,9 @@ config SPL_SERIAL_SUPPORT config SPL_SPI_FLASH_SUPPORT default y +config SPL_SPI_SUPPORT + default y + config SYS_BOARD default "zynqmp"
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -21,6 +21,9 @@ config SPL_SERIAL_SUPPORT config SPL_SPI_FLASH_SUPPORT default y +config SPL_SPI_SUPPORT + default y + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
arch/arm/mach-zynq/Kconfig +3 -0
@@ -21,6 +21,9 @@ config SPL_SERIAL_SUPPORT config SPL_SPI_FLASH_SUPPORT default y +config SPL_SPI_SUPPORT + default y + config SYS_BOARD default "zynq"
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PA_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_FIT=y
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PB_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_FIT=y
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P1020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1020RDB-PD_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P1021RDB-PC_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1022DS_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_PHYS_64BIT=y
configs/P1022DS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_FIT=y
configs/P1024RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1025RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P2020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/T1023RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_FIT=y
configs/T1024QDS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_FIT=y
configs/T1024RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_FIT=y
configs/T1040D4RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1040RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1042D4RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1042RDB_PI_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T2080QDS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_FIT=y
configs/T2080RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_FIT=y
configs/T2081QDS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_FIT=y
configs/am335x_evm_spiboot_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
configs/am57xx_evm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y
configs/am57xx_evm_nodt_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_HUSH_PARSER=y
configs/am57xx_hs_evm_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_OMAP54XX=y CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y
configs/at91sam9n12ek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/at91sam9x5ek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/axm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" CONFIG_BOOTDELAY=3
configs/brppt1_spi_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/cgtqmx6eval_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/chromebook_jerry_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_CHROMEBOOK_JERRY=y CONFIG_ROCKCHIP_FAST_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DM_KEYBOARD=y CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
configs/cm_fx6_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3
configs/cm_t43_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y CONFIG_SPL=y
configs/da850_am18xxevm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/da850evm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/db-88f6720_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_DB_88F6720=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-375-db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/db-88f6820-gp_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_DB_88F6820_GP=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/db-mv784mp-gp_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_DB_MV784MP_GP=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/dra7xx_evm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y
configs/dra7xx_hs_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y
configs/draco_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ds414_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_DS414=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/k2e_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="k2e-evm" CONFIG_OF_BOARD_SETUP=y
configs/k2g_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="k2g-evm" CONFIG_OF_BOARD_SETUP=y
configs/k2hk_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="k2hk-evm" CONFIG_OF_BOARD_SETUP=y
configs/k2l_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="k2l-evm" CONFIG_OF_BOARD_SETUP=y
configs/ma5d4evk_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4" CONFIG_BOOTDELAY=3
configs/maxbcm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_MAXBCM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-maxbcm" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ot1200_spl_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_OT1200=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm058_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pxm2_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/sama5d2_ptc_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/sama5d2_xplained_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d3xek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4_xplained_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4ek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/theadorable_debug_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs/theadorable_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs/thuban_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5202_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5601_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
include/configs/P1010RDB.h +0 -1
@@ -45,7 +45,6 @@#define CONFIG_SYS_TEXT_BASE 0x11000000#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc#else -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/P1022DS.h +0 -1
@@ -35,7 +35,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/T102xQDS.h +0 -1
@@ -70,7 +70,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/T102xRDB.h +0 -1
@@ -77,7 +77,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
include/configs/T104xRDB.h +0 -1
@@ -80,7 +80,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
include/configs/T208xQDS.h +0 -1
@@ -80,7 +80,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/T208xRDB.h +0 -1
@@ -69,7 +69,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/am335x_evm.h +0 -1
@@ -396,7 +396,6 @@#if defined(CONFIG_SPI_BOOT )/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/am57xx_evm.h +0 -1
@@ -107,7 +107,6 @@#endif /* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
include/configs/at91sam9n12ek.h +0 -1
@@ -259,7 +259,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
include/configs/at91sam9x5ek.h +0 -1
@@ -259,7 +259,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
include/configs/bav335x.h +0 -1
@@ -528,7 +528,6 @@ DEFAULT_LINUX_BOOT_ENV \#if defined(CONFIG_SPI_BOOT )/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/brppt1.h +0 -1
@@ -254,7 +254,6 @@ MMCARGS#define CONFIG_OMAP3_SPI #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#undef CONFIG_ENV_IS_NOWHERE
include/configs/cgtqmx6eval.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_MACH_TYPE 4122#ifdef CONFIG_SPL -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h"
include/configs/chromebook_jerry.h +0 -1
@@ -15,7 +15,6 @@#include <configs/rk3288_common.h> #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPI_FLASH_GIGADEVICE
include/configs/clearfog.h +0 -1
@@ -125,7 +125,6 @@#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/cm_fx6.h +0 -1
@@ -249,7 +249,6 @@#include "imx6_spl.h" #undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80/* offset 64 kb */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD
include/configs/cm_t43.h +0 -1
@@ -157,7 +157,6 @@#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)#define CONFIG_SYS_MONITOR_LEN (512 * 1024)#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480 -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD /* EEPROM */
include/configs/da850evm.h +0 -3
@@ -147,7 +147,6 @@#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
@@ -339,7 +338,6 @@#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN)#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"#define CONFIG_SPL_STACK 0x8001ff00
@@ -351,7 +349,6 @@/* Load U-Boot Image From MMC */ #ifdef CONFIG_SPL_MMC_LOAD #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x75 -#undef CONFIG_SPL_SPI_SUPPORT#undef CONFIG_SPL_SPI_LOAD#endif
include/configs/db-88f6720.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/db-88f6820-gp.h +0 -1
@@ -126,7 +126,6 @@#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/db-mv784mp-gp.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/dra7xx_evm.h +0 -1
@@ -197,7 +197,6 @@#endif /* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
include/configs/ds414.h +0 -1
@@ -124,7 +124,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
include/configs/el6x_common.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_MXC_UART #ifdef CONFIG_SPL -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h"
include/configs/ma5d4evk.h +0 -1
@@ -221,7 +221,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
include/configs/maxbcm.h +0 -1
@@ -85,7 +85,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/omapl138_lcdk.h +0 -1
@@ -97,7 +97,6 @@#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
include/configs/ot1200.h +0 -1
@@ -81,7 +81,6 @@/* SPL */ #ifdef CONFIG_SPL #include "imx6_spl.h" -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #endif
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -202,7 +202,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/pcm051.h +0 -1
@@ -125,7 +125,6 @@#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#ifdef CONFIG_SPI_BOOT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
include/configs/pcm058.h +0 -1
@@ -12,7 +12,6 @@#ifdef CONFIG_SPL #define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#include "imx6_spl.h"
include/configs/sama5d2_ptc.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_MONITOR_LEN (512 << 10)#ifdef CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d2_xplained.h +0 -1
@@ -137,7 +137,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d3xek.h +0 -1
@@ -188,7 +188,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d4_xplained.h +0 -1
@@ -150,7 +150,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d4ek.h +0 -1
@@ -148,7 +148,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/siemens-am33x-common.h +0 -1
@@ -140,7 +140,6 @@#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/socfpga_common.h +0 -3
@@ -326,9 +326,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_MAX_SIZE (64 * 1024)#define CONFIG_SPL_WATCHDOG_SUPPORT -#ifdef CONFIG_DM_SPI -#define CONFIG_SPL_SPI_SUPPORT -#endif /* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT
include/configs/taurus.h +0 -1
@@ -146,7 +146,6 @@#if defined(CONFIG_SPL_BUILD )/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/theadorable.h +0 -1
@@ -150,7 +150,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/ti_armv7_keystone2.h +0 -1
@@ -54,7 +54,6 @@ CONFIG_SYS_SPL_MALLOC_SIZE + \ SPL_MALLOC_F_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
include/configs/tqma6.h +0 -3
@@ -12,9 +12,6 @@#include <linux/kconfig.h> /* SPL */ /* #if defined(CONFIG_SPL_BUILD) */ - -#define CONFIG_SPL_SPI_SUPPORT -/* common IMX6 SPL configuration */ #include "imx6_spl.h"
include/configs/zynq-common.h +0 -1
@@ -327,7 +327,6 @@/* qspi mode is working fine */ #ifdef CONFIG_ZYNQ_QSPI -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v2 40/44 Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
---
Changes in v2: None
configs/am335x_evm_usbspl_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
configs/am335x_evm_usbspl_defconfig +2 -1
@@ -2,12 +2,13 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y +CONFIG_SPL_USBETH_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v2 41/44 Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
---
Changes in v2: None
configs/am43xx_evm_usbhost_boot_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
configs/am43xx_evm_usbhost_boot_defconfig +2 -1
@@ -7,11 +7,12 @@ CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_SPL_LOAD_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v2 42/44 Convert CONFIG_SPL_USB_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
---
Changes in v2: None
configs/am43xx_evm_usbhost_boot_defconfig | 1 + include/configs/am43xx_evm.h | 3 --- 2 files changed, 1 insertion(+), 3 deletions(-)
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
include/configs/am43xx_evm.h +0 -3
@@ -91,9 +91,6 @@#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"/* SPL USB Support */ -#ifdef CONFIG_SPL_USB_HOST_SUPPORT -#define CONFIG_SPL_USB_SUPPORT -#endif #if defined(CONFIG_SPL_USB_HOST_SUPPORT ) || !defined(CONFIG_SPL_BUILD )#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v2 43/44 Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
---
Changes in v2: None
arch/arm/Kconfig | 1 + arch/arm/mach-socfpga/Kconfig | 3 +++ board/ti/am335x/Kconfig | 3 +++ configs/am335x_baltos_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_prompt_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am335x_shc_sdboot_prompt_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/cgtqmx6eval_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/gwventana_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 1 + configs/ls1021aqds_sdcard_ifc_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_defconfig | 1 + configs/ls1021atwr_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_nand_defconfig | 1 + configs/ls1043aqds_sdcard_ifc_defconfig | 1 + configs/ls1043aqds_sdcard_qspi_defconfig | 1 + configs/ls1043ardb_nand_defconfig | 1 + configs/ls1043ardb_sdcard_defconfig | 1 + configs/mx6cuboxi_defconfig | 1 + configs/mx6sabresd_spl_defconfig | 1 + configs/mx6slevk_spl_defconfig | 1 + configs/mx6sxsabresd_spl_defconfig | 1 + configs/mx6ul_14x14_evk_defconfig | 1 + configs/mx6ul_9x9_evk_defconfig | 1 + configs/novena_defconfig | 1 + configs/ot1200_spl_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pepper_defconfig | 1 + configs/picosam9g45_defconfig | 1 + configs/platinum_picon_defconfig | 1 + configs/platinum_titanium_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + configs/udoo_defconfig | 1 + configs/wandboard_defconfig | 1 + configs/xpress_spl_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + include/configs/brppt1.h | 1 - include/configs/imx6_spl.h | 1 - include/configs/ls1021aqds.h | 2 -- include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 2 -- include/configs/picosam9g45.h | 2 -- include/configs/siemens-am33x-common.h | 2 -- include/configs/socfpga_common.h | 2 -- include/configs/ti_am335x_common.h | 1 - 68 files changed, 63 insertions(+), 14 deletions(-)
arch/arm/Kconfig +1 -0
@@ -790,6 +790,7 @@ config TARGET_LS1021AQDS bool "Support ls1021aqds" select CPU_V7 select SUPPORT_SPL + config TARGET_LS1021ATWR bool "Support ls1021atwr" select CPU_V7
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -24,6 +24,9 @@ config SPL_SPI_FLASH_SUPPORT config SPL_SPI_SUPPORT default y +config SPL_WATCHDOG_SUPPORT + default y + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
board/ti/am335x/Kconfig +3 -0
@@ -3,6 +3,9 @@ if TARGET_AM335X_EVM config SPL_ENV_SUPPORT default y +config SPL_WATCHDOG_SUPPORT + default y + config SYS_BOARD default "am335x"
configs/am335x_baltos_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/am335x_igep0033_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_ict_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_netboot_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_prompt_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_sdboot_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_sdboot_prompt_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_sl50_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
configs/birdland_bav335a_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_BAV_VERSION=1 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/birdland_bav335b_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_BAV_VERSION=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/brppt1_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" CONFIG_BOOTDELAY=-2
configs/brppt1_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_BOOTDELAY=-2
configs/brppt1_spi_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/cgtqmx6eval_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/cm_fx6_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3
configs/cm_t335_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_HUSH_PARSER=y
configs/draco_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/gwventana_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_DM_SERIAL=y CONFIG_FIT=y
configs/ls1021aqds_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/ls1021aqds_sdcard_ifc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1021aqds_sdcard_qspi_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/ls1021atwr_sdcard_ifc_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/ls1021atwr_sdcard_qspi_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043aqds_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043aqds_sdcard_ifc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043aqds_sdcard_qspi_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043ardb_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043ardb_sdcard_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/mx6cuboxi_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/mx6sabresd_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6slevk_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6sxsabresd_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6ul_14x14_evk_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6ul_9x9_evk_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/novena_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_SPL=y
configs/ot1200_spl_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm051_rev1_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/pcm051_rev3_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/pcm058_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pengwyn_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y CONFIG_SPL_MTD_SUPPORT=y
configs/pepper_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="pepper# "
configs/picosam9g45_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/platinum_picon_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/platinum_titanium_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pxm2_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/thuban_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/udoo_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/wandboard_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/xpress_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5202_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5601_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
include/configs/brppt1.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_HW_WATCHDOG #define CONFIG_OMAP_WATCHDOG -#define CONFIG_SPL_WATCHDOG_SUPPORT /* Bootcount using the RTC block */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
include/configs/imx6_spl.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_SPL_TEXT_BASE 0x00908000#define CONFIG_SPL_MAX_SIZE 0x10000#define CONFIG_SPL_STACK 0x0091FFB8 -#define CONFIG_SPL_WATCHDOG_SUPPORT /* NAND support */ #if defined(CONFIG_SPL_NAND_SUPPORT )
include/configs/ls1021aqds.h +0 -2
@@ -69,7 +69,6 @@ unsigned long get_board_ddr_clk(void);#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600
@@ -99,7 +98,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000#define CONFIG_SPL_MAX_SIZE 0x1a000
include/configs/ls1021atwr.h +0 -1
@@ -118,7 +118,6 @@#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8#ifdef CONFIG_SECURE_BOOT
include/configs/ls1043a_common.h +0 -2
@@ -60,7 +60,6 @@#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500
@@ -83,7 +82,6 @@#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000#define CONFIG_SPL_MAX_SIZE 0x1a000#define CONFIG_SPL_STACK 0x1001d000
include/configs/picosam9g45.h +0 -2
@@ -164,8 +164,6 @@#define CONFIG_SPL_MAX_SIZE 0x010000#define CONFIG_SPL_STACK 0x310000 -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SYS_MONITOR_LEN 0x80000#ifdef CONFIG_SYS_USE_MMC
include/configs/siemens-am33x-common.h +0 -2
@@ -138,8 +138,6 @@#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/socfpga_common.h +0 -2
@@ -325,8 +325,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR#define CONFIG_SPL_MAX_SIZE (64 * 1024) -#define CONFIG_SPL_WATCHDOG_SUPPORT -/* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FAT_SUPPORT ) || defined(CONFIG_SPL_EXT_SUPPORT )
include/configs/ti_am335x_common.h +0 -1
@@ -64,7 +64,6 @@ (128 << 20))/* Enable the watchdog inside of SPL */ -#define CONFIG_SPL_WATCHDOG_SUPPORT /* * Since SPL did pll and ddr initialization for us,
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v2 44/44 Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
---
Changes in v2:
- Lots of work to make use of common values across multiple boards
- Added a patch to change 'spear' CONFIGs to upper case
board/ti/am335x/Kconfig | 3 +++ configs/am335x_baltos_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_prompt_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am335x_shc_sdboot_prompt_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/am43xx_hs_evm_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/brxre1_defconfig | 1 + configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + configs/ti814x_evm_defconfig | 1 + configs/ti816x_evm_defconfig | 1 + include/configs/am335x_evm.h | 3 --- include/configs/am335x_igep0033.h | 1 - include/configs/am335x_shc.h | 1 - include/configs/am335x_sl50.h | 2 -- include/configs/am43xx_evm.h | 1 - include/configs/baltos.h | 2 -- include/configs/bav335x.h | 2 -- include/configs/bur_am335x_common.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcm058.h | 1 - include/configs/pengwyn.h | 1 - include/configs/siemens-am33x-common.h | 2 -- include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - 46 files changed, 34 insertions(+), 20 deletions(-)
board/ti/am335x/Kconfig +3 -0
@@ -6,6 +6,9 @@ config SPL_ENV_SUPPORT config SPL_WATCHDOG_SUPPORT default y +config SPL_YMODEM_SUPPORT + default y + config SYS_BOARD default "am335x"
configs/am335x_baltos_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/am335x_igep0033_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y
configs/am335x_shc_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_ict_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_netboot_defconfig +1 -0
@@ -15,6 +15,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_prompt_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_sdboot_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_sdboot_prompt_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_sl50_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" CONFIG_SPL=y
configs/am43xx_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,NAND"
configs/am43xx_evm_ethboot_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_ISW_ENTRY_ADDR=0x40300350 CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
configs/am43xx_hs_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_ISW_ENTRY_ADDR=0x40302ae0 CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND"
configs/birdland_bav335a_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BAV_VERSION=1 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/birdland_bav335b_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BAV_VERSION=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/brppt1_mmc_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" CONFIG_BOOTDELAY=-2
configs/brppt1_nand_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_BOOTDELAY=-2
configs/brppt1_spi_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/brxre1_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_BOOTDELAY=-2 CONFIG_SPL=y
configs/draco_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm051_rev1_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/pcm051_rev3_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/pcm058_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pengwyn_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y CONFIG_SPL_MTD_SUPPORT=y
configs/pxm2_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/thuban_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ti814x_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/ti816x_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_SPL=y CONFIG_HUSH_PARSER=y
include/configs/am335x_evm.h +0 -3
@@ -206,8 +206,6 @@/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_YMODEM_SUPPORT -/* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX
@@ -328,7 +326,6 @@#if defined(CONFIG_SPL_BUILD ) && defined(CONFIG_SPL_USBETH_SUPPORT )/* Remove other SPL modes. */ -#undef CONFIG_SPL_YMODEM_SUPPORT#define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND/* disable host part of MUSB in SPL */
include/configs/am335x_igep0033.h +0 -1
@@ -124,7 +124,6 @@/* SPL */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#define CONFIG_SYS_NAND_5_ADDR_CYCLE
include/configs/am335x_shc.h +0 -1
@@ -281,7 +281,6 @@#define CONFIG_POWER_TPS65217 /* SPL */ -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
include/configs/am335x_sl50.h +0 -2
@@ -80,7 +80,6 @@#define CONFIG_POWER_TPS65910 /* SPL */ -#define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT
@@ -97,7 +96,6 @@#if defined(CONFIG_SPL_BUILD ) && defined(CONFIG_SPL_USBETH_SUPPORT )/* Remove other SPL modes. */ -#undef CONFIG_SPL_YMODEM_SUPPORT#define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND/* disable host part of MUSB in SPL */
include/configs/am43xx_evm.h +0 -1
@@ -43,7 +43,6 @@ CONFIG_SPL_TEXT_BASE)#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ #define CONFIG_SYS_L2_PL310
include/configs/baltos.h +0 -2
@@ -217,8 +217,6 @@/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_YMODEM_SUPPORT -/* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX
include/configs/bav335x.h +0 -2
@@ -350,8 +350,6 @@ DEFAULT_LINUX_BOOT_ENV \/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_YMODEM_SUPPORT -/* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX
include/configs/bur_am335x_common.h +0 -1
@@ -112,7 +112,6 @@/* General parts of the framework, required. */ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#endif /* ! __BUR_AM335X_COMMON_H__ */
include/configs/pcm051.h +0 -1
@@ -120,7 +120,6 @@/* CPU */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL"#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
include/configs/pcm058.h +0 -1
@@ -11,7 +11,6 @@#include <config_distro_defaults.h> #ifdef CONFIG_SPL -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#include "imx6_spl.h"
include/configs/pengwyn.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2/* SPL */ -#define CONFIG_SPL_YMODEM_SUPPORT /* General network SPL */ #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
include/configs/siemens-am33x-common.h +0 -2
@@ -136,8 +136,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#define CONFIG_FS_FAT -#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/ti814x_evm.h +0 -1
@@ -169,7 +169,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
include/configs/ti816x_evm.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
Signature · 1 line
2.8.0.rc3.226.g39d4020
v2 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
In reply to Simon GlassHello Simon,
Am 30.08.2016 um 02:21 schrieb Simon Glass:
Quoted 200 lines
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.
NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is that some PowerPC boards do things like this in their board config file:
#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #else #define CONFIG_SPL_SERIAL_SUPPORT #endifThis means that TPL reuses the SPL options. We can't support this in
Kconfigso I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only for SPL:
#ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_SERIAL_SUPPORT #endifThis is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:#ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_DM #endifFinally, many defconfig files are not ordered correctly, resulting in larger patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.
The series is fully build-tested (for bisectability) and causes no failures for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):
openrisc: + openrisc-generic sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 blackfin: + bf609-ezkitThis build is also config tested (with buildman -K). The changes are with spear (to rename options) and
am335x_evm_usbspl(which I think is correct).boards.cfg is up to date. Nothing to do.
Summary of 49 commits for 1185 boards (32 threads, 1 job per thread) 01: cfgopenrisc: + openrisc-generic sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 blackfin: + bf609-ezkit02: move
03: buildman
04: Correct defconfigs using savedefconfig
05: moveconfig: Add an option to skip prompts
06: moveconfig: Add an option to commit changes
07:Kconfig: Move SPL settings into their own file
08: arm: fsl: Adjust ordering of #ifndefCONFIG_SPL_BUILD
09: DropCONFIG_SPL_RAM_SUPPORT
10: Use separate options for TPL support
11:Kconfig: spl: Add SPL support options toKconfig
12:Kconfig: tpl: Add some TPL support options toKconfig
13: Move existing use ofCONFIG_SPL_DMtoKconfig
14: Move existing use ofCONFIG_SPL_RSAtoKconfig
15: spear: Use upper case for CONFIG options
arm:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_STV0991=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_spear310=1 CONFIG_spear320=1 CONFIG_spear600=1 CONFIG_stv0991=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_STV0991=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_spear310=1 CONFIG_spear320=1 CONFIG_spear600=1 CONFIG_stv0991=1 CONFIG_usbtty=1spear600_nand:
+ u-boot.cfg:CONFIG_NAND=1
- u-boot.cfg: CONFIG_nand=1 CONFIG_spear600=1
+ all:CONFIG_NAND=1
- all: CONFIG_nand=1 CONFIG_spear600=1spear300_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear300=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- all:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear300=1spear300_usbtty:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear300=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear300=1 CONFIG_usbtty=1spear320_usbtty_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear320=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear320=1 CONFIG_usbtty=1spear310_usbtty_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear310=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear310=1 CONFIG_usbtty=1spear310_usbttyspear310_usbtty_pnor:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear310=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear310=1 CONFIG_usbtty=1
spear300 :
- u-boot.cfg: CONFIG_spear300=1
- all: CONFIG_spear300=1spear600_usbtty:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_spear600=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all: CONFIG_spear600=1 CONFIG_usbtty=1spear320_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear320=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- all:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear320=1
stv0991 :
+ u-boot.cfg:CONFIG_STV0991=1
- u-boot.cfg: CONFIG_stv0991=1
+ all:CONFIG_STV0991=1
- all: CONFIG_stv0991=1
spear320spear320_pnor:
- u-boot.cfg: CONFIG_spear320=1
- all: CONFIG_spear320=1spear310_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear310=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- all:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear310=1spear320_usbttyspear320_usbtty_pnor:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear320=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear320=1 CONFIG_usbtty=1
spear600 :
- u-boot.cfg: CONFIG_spear600=1
- all: CONFIG_spear600=1spear300_usbtty_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_usbtty=1
spear310spear310_pnor:
- u-boot.cfg: CONFIG_spear310=1
- all: CONFIG_spear310=1spear600_usbtty_nand:
+ u-boot.cfg:CONFIG_NAND=1CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_nand=1 CONFIG_spear600=1 CONFIG_usbtty=1
+ all:CONFIG_NAND=1CONFIG_USBTTY=1
- all: CONFIG_nand=1 CONFIG_spear600=1 CONFIG_usbtty=1
16: ConvertCONFIG_SPL_CRYPTO_SUPPORTtoKconfig
17: ConvertCONFIG_SPL_HASH_SUPPORTtoKconfig
18: ConvertCONFIG_SPL_DMA_SUPPORTtoKconfig
19: ConvertCONFIG_SPL_DRIVERS_MISC_SUPPORTtoKconfig
20: ConvertCONFIG_SPL_ENV_SUPPORTtoKconfig
21: ConvertCONFIG_SPL_ETH_SUPPORTtoKconfig
22: ConvertCONFIG_SPL_EXT_SUPPORTtoKconfig
23: ConvertCONFIG_SPL_FAT_SUPPORTtoKconfig
24: ConvertCONFIG_SPL_GPIO_SUPPORTtoKconfig
25: ConvertCONFIG_SPL_I2C_SUPPORTtoKconfig
26: ConvertCONFIG_SPL_LIBCOMMON_SUPPORTtoKconfig
27: ConvertCONFIG_SPL_LIBDISK_SUPPORTtoKconfig
28: ConvertCONFIG_SPL_LIBGENERIC_SUPPORTtoKconfig
29: ConvertCONFIG_SPL_MMC_SUPPORTtoKconfig
30: ConvertCONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORTtoKconfig
31: ConvertCONFIG_SPL_MTD_SUPPORTtoKconfig
32: ConvertCONFIG_SPL_MUSB_NEW_SUPPORTtoKconfig
33: ConvertCONFIG_SPL_NAND_SUPPORTtoKconfig
34: ConvertCONFIG_SPL_NET_SUPPORTtoKconfig
35: ConvertCONFIG_SPL_NOR_SUPPORTtoKconfig
36: ConvertCONFIG_SPL_ONENAND_SUPPORTtoKconfig
37: ConvertCONFIG_SPL_PINCTRL_SUPPORTtoKconfig
38: ConvertCONFIG_SPL_POWER_SUPPORTtoKconfig
39: ConvertCONFIG_SPL_SATA_SUPPORTtoKconfig
40: ConvertCONFIG_SPL_SERIAL_SUPPORTtoKconfig
41: ConvertCONFIG_SPL_SPI_FLASH_SUPPORTtoKconfig
42: ConvertCONFIG_SPL_SPI_SUPPORTtoKconfig
43: ConvertCONFIG_SPL_USBETH_SUPPORTtoKconfig
arm:
+ u-boot.cfg:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1
+ u-boot-spl.cfg:CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1
+ all:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1am335x_evm_usbspl:
+ u-boot.cfg:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1
Quoted 8 lines
+ u-boot-spl.cfg:
CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1
+ all:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1
44: ConvertCONFIG_SPL_USB_HOST_SUPPORTtoKconfig
45: ConvertCONFIG_SPL_USB_SUPPORTtoKconfig
46: ConvertCONFIG_SPL_WATCHDOG_SUPPORTtoKconfig
47: ConvertCONFIG_SPL_YMODEM_SUPPORTtoKconfig
48:Kconfig: Add a whitelist of ad-hoc CONFIG options
49:Makefile: Give a build error if ad-hoc CONFIG options are added
Your patchserie has 44 patches .. here buildman test 49 ... It seems to me the first 3 patches and the last 2 are missing in your series ...
Do you have a public git tree with this patches?
Ah, may:
http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/kconfig-working3
Ok, I started tbot tc:
https://github.com/hsdenx/tbot/blob/master/src/tc/uboot/tc_uboot_check_kconfig.py
to check, if your series does not change u-boot.bin and spl/uboot-spl.bin
first outputs:
hs at localhost:tbot [master] $ python2.7 src/common/tbot.py -c config/tbot_uboot_kconfig_check.cfg -t tc_uboot_check_kconfig.py -l log/tbot_checkconfig.log
**** option cfg: config/tbot_uboot_kconfig_check.cfg log: log/tbot_checkconfig.log tc:tc_uboot_check_kconfig.py v 0
('CUR WORK PATH: ', '/home/hs/data/Entwicklung/tbot')
('CFGFILE ', 'config/tbot_uboot_kconfig_check.cfg')
('LOGFILE ', '/home/hs/data/Entwicklung/tbot/log/tbot_checkconfig.log')
get u-boot source
testing board 10m50 1 / 1189
testing board 3c120 2 / 1189
testing board A10-OLinuXino-Lime 3 / 1189
A10-OLinuXino-Lime u-boot spl bin diff 6443bde88d3f4dd2e4a03ea0b5b23d40 != ccf133653c402c471644492201854d31
testing board A10s-OLinuXino-M 4 / 1189
A10s-OLinuXino-M u-boot spl bin diff 620fe3f1f87e6a4d283e088b20eaaabb != eba0ced2452df73c8c832217bce4e255
testing board A13-OLinuXino 5 / 1189
A13-OLinuXino u-boot spl bin diff 9524cb79bda360baa2e59982e792b62d != e65c6fa3842baf6b2964c29c3d92afcd testing board A13-OLinuXinoM 6 / 1189
A13-OLinuXinoM u-boot spl bin diff accae01a1f32f4ab8d5fe178b347fa19 != 153716412d66dc33790293d340c6fdbd testing board A20-Olimex-SOM-EVB 7 / 1189
A20-Olimex-SOM-EVB u-boot spl bin diff ccb7e2e6515af8511220af50886bc539 != 530e7d17fda711516b733a899f70b353
testing board A20-OLinuXino-Lime2 8 / 1189
A20-OLinuXino-Lime2 u-boot spl bin diff 75b6f0b647be28c085f78adef374799d != 7ca441f27790846d8ffad383de1a60c1
testing board A20-OLinuXino-Lime 9 / 1189
A20-OLinuXino-Lime u-boot spl bin diff 7086f5ffd5faf8ea144e7a2abb288c47 != 6a2805806c25aad683c8e6de71041133
testing board A20-OLinuXino_MICRO 10 / 1189
A20-OLinuXino_MICRO u-boot spl bin diff c0669e033d627abb96d04209abaa8eb8 != 76663a41fc8b33d748d2de2c4c18749c
testing board a3m071 11 / 1189
a3m071 u-boot spl bin diff 770b372a12ed027051933f00a87e123b != e5e1f8335c1ef3faf66ebba031c8d296 testing board a4m072 12 / 1189
testing board a4m2k 13 / 1189
a4m2k u-boot spl bin diff ead2adaf8f425857ebaea243af5768bc != cb0afb3ef300c953255f7f4d2a644373 testing board ac14xx 14 / 1189
testing board acadia 15 / 1189
testing board adp-ag101p 16 / 1189
testing board Ainol_AW1 17 / 1189Ainol_AW1 u-boot spl bin diff 9b22f5439fdef333932be5948db0a0c1 != d9bdcfb6af5100c9a1830b5a3ace992f testing board alt 18 / 1189
testing board am335x_baltos 19 / 1189am335x_baltos u-boot spl bin diff 103f8a788ff657ec0dbc21be1e89789e != dbd4ca792ccb091698d09756d6703f09 testing board am335x_boneblack 20 / 1189
testing board am335x_boneblack second compile failed
log here says:
2016-08-30 07:24:26,280:CON :tbotlib # tb_ctrl2: common/spl/spl_nand.c: In function
'spl_nand_load_image':^Mcommon/spl/spl_nand.c:95:23: error: 'CONFIG_CMD_SPL_NAND_OFS' undeclared (first use in this function)^M common/spl/spl_nand.c:95:23: note: each undeclared identifier is reported only once for each function it appears in^Mcommon/spl/spl_nand.c:96:4: error: 'CONFIG_CMD_SPL_WRITE_SIZE' undeclared (first use in this function)^M common/spl/spl_nand.c:108:23: error: 'CONFIG_SYS_NAND_SPL_KERNEL_OFFS' undeclared (first use in this function)^Mcommon/spl/spl_nand.c:136:30: error: 'CONFIG_SYS_NAND_U_BOOT_OFFS' undeclared (first use in this function)^Mscripts/Makefile.build:280: recipe for target 'spl/common/spl/spl_nand.o' failed^M make[2]: *** [spl/common/spl/spl_nand.o] Error 1^M
make[2]: *** Waiting for unfinished jobs....^Mscripts/Makefile.spl:300: recipe for target 'spl/common/spl' failed^M
make[1]: *** [spl/common/spl] Error 2^M
make[1]: *** Waiting for unfinished jobs....^M
Makefile:1334: recipe for target 'spl/u-boot-spl' failed^M
make: *** [spl/u-boot-spl] Error 2^M
make: *** Waiting for unfinished jobs....^M
hs at pollux [ 7:24:26] ttbott>
testing board am335x_boneblack_vboot 21 / 1189
all boards takes a while ... but it seems there is an issue with SPL builds...
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
v2 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
Hi Heiko,
Quoted 326 lines · Heiko Schocher
Hello Simon,
Am 30.08.2016 um 02:21 schrieb Simon Glass:
Quoted 312 lines
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an
option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it
is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is
that some PowerPC boards do things like this in their board config file:#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #else #define CONFIG_SPL_SERIAL_SUPPORT #endifThis means that TPL reuses the SPL options. We can't support this in
Kconfig
so I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only
for SPL:#ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_SERIAL_SUPPORT #endifThis is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:#ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_DM #endifFinally, many defconfig files are not ordered correctly, resulting in larger
patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.The series is fully build-tested (for bisectability) and causes no failures
for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):openrisc: + openrisc-generic sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 blackfin: + bf609-ezkitThis build is also config tested (with buildman -K). The changes are with spear (to rename options) and
am335x_evm_usbspl(which I think is correct).boards.cfg is up to date. Nothing to do.
Summary of 49 commits for 1185 boards (32 threads, 1 job per thread) 01: cfgopenrisc: + openrisc-generic sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 blackfin: + bf609-ezkit02: move
03: buildman
04: Correct defconfigs using savedefconfig
05: moveconfig: Add an option to skip prompts
06: moveconfig: Add an option to commit changes
07:Kconfig: Move SPL settings into their own file
08: arm: fsl: Adjust ordering of #ifndefCONFIG_SPL_BUILD
09: DropCONFIG_SPL_RAM_SUPPORT
10: Use separate options for TPL support
11:Kconfig: spl: Add SPL support options toKconfig
12:Kconfig: tpl: Add some TPL support options toKconfig
13: Move existing use ofCONFIG_SPL_DMtoKconfig
14: Move existing use ofCONFIG_SPL_RSAtoKconfig
15: spear: Use upper case for CONFIG options
arm:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_STV0991=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_spear310=1 CONFIG_spear320=1 CONFIG_spear600=1 CONFIG_stv0991=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_STV0991=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_spear310=1 CONFIG_spear320=1 CONFIG_spear600=1 CONFIG_stv0991=1 CONFIG_usbtty=1spear600_nand:
+ u-boot.cfg:CONFIG_NAND=1
- u-boot.cfg: CONFIG_nand=1 CONFIG_spear600=1
+ all:CONFIG_NAND=1
- all: CONFIG_nand=1 CONFIG_spear600=1spear300_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear300=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- all:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear300=1spear300_usbtty:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear300=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear300=1 CONFIG_usbtty=1spear320_usbtty_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear320=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear320=1 CONFIG_usbtty=1spear310_usbtty_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear310=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear310=1 CONFIG_usbtty=1spear310_usbttyspear310_usbtty_pnor:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear310=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear310=1 CONFIG_usbtty=1
spear300 :
- u-boot.cfg: CONFIG_spear300=1
- all: CONFIG_spear300=1spear600_usbtty:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_spear600=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all: CONFIG_spear600=1 CONFIG_usbtty=1spear320_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear320=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- all:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear320=1 stv0991 :
+ u-boot.cfg:CONFIG_STV0991=1
- u-boot.cfg: CONFIG_stv0991=1
+ all:CONFIG_STV0991=1
- all: CONFIG_stv0991=1
spear320spear320_pnor:
- u-boot.cfg: CONFIG_spear320=1
- all: CONFIG_spear320=1spear310_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear310=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000
- all:CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_nand=1 CONFIG_spear310=1spear320_usbttyspear320_usbtty_pnor:
+ u-boot.cfg:CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear320=1 CONFIG_usbtty=1
+ all:CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_spear320=1 CONFIG_usbtty=1
spear600 :
- u-boot.cfg: CONFIG_spear600=1
- all: CONFIG_spear600=1spear300_usbtty_nand:
+ u-boot.cfg:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- u-boot.cfg:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_usbtty=1
+ all:CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN)CONFIG_ENV_IS_IN_FLASH=1CONFIG_ENV_SECT_SIZE=0x00010000CONFIG_NAND=1CONFIG_SYS_MONITOR_LEN=0x00040000CONFIG_USBTTY=1
- all:CONFIG_DW_UDC=1CONFIG_ENV_IS_IN_NAND=1CONFIG_ENV_OFFSET=0x60000CONFIG_ENV_RANGE=0x10000CONFIG_SPEAR_USBTTY=1CONFIG_USBD_HS=1CONFIG_USBD_MANUFACTURER="STMicroelectronics"CONFIG_USBD_PRODUCT_NAME="SPEArSoC"CONFIG_USB_DEVICE=1CONFIG_USB_TTY=1CONFIG_nand=1 CONFIG_spear300=1 CONFIG_usbtty=1
spear310spear310_pnor:
- u-boot.cfg: CONFIG_spear310=1
- all: CONFIG_spear310=1spear600_usbtty_nand:
+ u-boot.cfg:CONFIG_NAND=1CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_nand=1 CONFIG_spear600=1 CONFIG_usbtty=1
+ all:CONFIG_NAND=1CONFIG_USBTTY=1
- all: CONFIG_nand=1 CONFIG_spear600=1 CONFIG_usbtty=1
16: ConvertCONFIG_SPL_CRYPTO_SUPPORTtoKconfig
17: ConvertCONFIG_SPL_HASH_SUPPORTtoKconfig
18: ConvertCONFIG_SPL_DMA_SUPPORTtoKconfig
19: ConvertCONFIG_SPL_DRIVERS_MISC_SUPPORTtoKconfig
20: ConvertCONFIG_SPL_ENV_SUPPORTtoKconfig
21: ConvertCONFIG_SPL_ETH_SUPPORTtoKconfig
22: ConvertCONFIG_SPL_EXT_SUPPORTtoKconfig
23: ConvertCONFIG_SPL_FAT_SUPPORTtoKconfig
24: ConvertCONFIG_SPL_GPIO_SUPPORTtoKconfig
25: ConvertCONFIG_SPL_I2C_SUPPORTtoKconfig
26: ConvertCONFIG_SPL_LIBCOMMON_SUPPORTtoKconfig
27: ConvertCONFIG_SPL_LIBDISK_SUPPORTtoKconfig
28: ConvertCONFIG_SPL_LIBGENERIC_SUPPORTtoKconfig
29: ConvertCONFIG_SPL_MMC_SUPPORTtoKconfig
30: ConvertCONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORTtoKconfig31: ConvertCONFIG_SPL_MTD_SUPPORTtoKconfig
32: ConvertCONFIG_SPL_MUSB_NEW_SUPPORTtoKconfig
33: ConvertCONFIG_SPL_NAND_SUPPORTtoKconfig
34: ConvertCONFIG_SPL_NET_SUPPORTtoKconfig
35: ConvertCONFIG_SPL_NOR_SUPPORTtoKconfig
36: ConvertCONFIG_SPL_ONENAND_SUPPORTtoKconfig
37: ConvertCONFIG_SPL_PINCTRL_SUPPORTtoKconfig
38: ConvertCONFIG_SPL_POWER_SUPPORTtoKconfig
39: ConvertCONFIG_SPL_SATA_SUPPORTtoKconfig
40: ConvertCONFIG_SPL_SERIAL_SUPPORTtoKconfig
41: ConvertCONFIG_SPL_SPI_FLASH_SUPPORTtoKconfig
42: ConvertCONFIG_SPL_SPI_SUPPORTtoKconfig
43: ConvertCONFIG_SPL_USBETH_SUPPORTtoKconfig
arm:
+ u-boot.cfg:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1
+ u-boot-spl.cfg:CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1
+ all:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1am335x_evm_usbspl:
+ u-boot.cfg:CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1
+ u-boot-spl.cfg:CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1Quoted 8 lines
+ all:
CONFIG_SPL_ENV_SUPPORT=1CONFIG_SPL_MMC_SUPPORT=1CONFIG_SPL_NAND_SUPPORT=1CONFIG_SPL_NET_SUPPORT=1
44: ConvertCONFIG_SPL_USB_HOST_SUPPORTtoKconfig
45: ConvertCONFIG_SPL_USB_SUPPORTtoKconfig
46: ConvertCONFIG_SPL_WATCHDOG_SUPPORTtoKconfig
47: ConvertCONFIG_SPL_YMODEM_SUPPORTtoKconfig
48:Kconfig: Add a whitelist of ad-hoc CONFIG options 49:Makefile: Give a build error if ad-hoc CONFIG options are added
Quoted 7 lines
Your patchserie has 44 patches .. here buildman test 49 ... It seems to me the first 3 patches and the last 2 are missing in your series ...
Do you have a public git tree with this patches?
Ah, may:
http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/kconfig-working3
Yes. I always push a working branch before sending patches, but don't always mention it :-(
Quoted 87 lines
Ok, I started tbot tc:
https://github.com/hsdenx/tbot/blob/master/src/tc/uboot/tc_uboot_check_kconfig.py
to check, if your series does not change u-boot.bin and spl/uboot-spl.binfirst outputs:
hs at localhost:tbot [master] $ python2.7
src/common/tbot.py-c config/tbot_uboot_kconfig_check.cfg -ttc_uboot_check_kconfig.py-l log/tbot_checkconfig.log
**** option cfg: config/tbot_uboot_kconfig_check.cfg log:
log/tbot_checkconfig.log tc:tc_uboot_check_kconfig.pyv 0 ('CUR WORK PATH: ', '/home/hs/data/Entwicklung/tbot')
('CFGFILE ', 'config/tbot_uboot_kconfig_check.cfg')
('LOGFILE ', '/home/hs/data/Entwicklung/tbot/log/tbot_checkconfig.log') get u-boot source
testing board 10m50 1 / 1189
testing board 3c120 2 / 1189
testing board A10-OLinuXino-Lime 3 / 1189
A10-OLinuXino-Lime u-boot spl bin diff6443bde88d3f4dd2e4a03ea0b5b23d40!=ccf133653c402c471644492201854d31
testing board A10s-OLinuXino-M 4 / 1189
A10s-OLinuXino-M u-boot spl bin diff620fe3f1f87e6a4d283e088b20eaaabb!=eba0ced2452df73c8c832217bce4e255
testing board A13-OLinuXino 5 / 1189
A13-OLinuXino u-boot spl bin diff9524cb79bda360baa2e59982e792b62d!=e65c6fa3842baf6b2964c29c3d92afcd
testing board A13-OLinuXinoM 6 / 1189
A13-OLinuXinoM u-boot spl bin diffaccae01a1f32f4ab8d5fe178b347fa19!=153716412d66dc33790293d340c6fdbd
testing board A20-Olimex-SOM-EVB 7 / 1189
A20-Olimex-SOM-EVB u-boot spl bin diffccb7e2e6515af8511220af50886bc539!=530e7d17fda711516b733a899f70b353
testing board A20-OLinuXino-Lime2 8 / 1189
A20-OLinuXino-Lime2 u-boot spl bin diff75b6f0b647be28c085f78adef374799d!=7ca441f27790846d8ffad383de1a60c1
testing board A20-OLinuXino-Lime 9 / 1189
A20-OLinuXino-Lime u-boot spl bin diff7086f5ffd5faf8ea144e7a2abb288c47!=6a2805806c25aad683c8e6de71041133
testing board A20-OLinuXino_MICRO 10 / 1189
A20-OLinuXino_MICRO u-boot spl bin diffc0669e033d627abb96d04209abaa8eb8!=76663a41fc8b33d748d2de2c4c18749c
testing board a3m071 11 / 1189
a3m071 u-boot spl bin diff770b372a12ed027051933f00a87e123b!=e5e1f8335c1ef3faf66ebba031c8d296
testing board a4m072 12 / 1189
testing board a4m2k 13 / 1189
a4m2k u-boot spl bin diffead2adaf8f425857ebaea243af5768bc!=cb0afb3ef300c953255f7f4d2a644373
testing board ac14xx 14 / 1189
testing board acadia 15 / 1189
testing board adp-ag101p 16 / 1189
testing boardAinol_AW117 / 1189Ainol_AW1u-boot spl bin diff9b22f5439fdef333932be5948db0a0c1!=d9bdcfb6af5100c9a1830b5a3ace992f
testing board alt 18 / 1189
testing boardam335x_baltos19 / 1189am335x_baltosu-boot spl bin diff103f8a788ff657ec0dbc21be1e89789e!=dbd4ca792ccb091698d09756d6703f09
testing boardam335x_boneblack20 / 1189
testing boardam335x_boneblacksecond compile failedlog here says:
2016-08-30 07:24:26,280:CON :tbotlib # tb_ctrl2: common/spl/spl_nand.c:In function 'spl_nand_load_image':^M
common/spl/spl_nand.c:95:23: error: 'CONFIG_CMD_SPL_NAND_OFS' undeclared (first use in this function)^Mcommon/spl/spl_nand.c:95:23: note: each undeclared identifier is reported only once for each function it appears in^Mcommon/spl/spl_nand.c:96:4: error: 'CONFIG_CMD_SPL_WRITE_SIZE' undeclared (first use in this function)^Mcommon/spl/spl_nand.c:108:23: error: 'CONFIG_SYS_NAND_SPL_KERNEL_OFFS' undeclared (first use in this function)^Mcommon/spl/spl_nand.c:136:30: error: 'CONFIG_SYS_NAND_U_BOOT_OFFS' undeclared (first use in this function)^Mscripts/Makefile.build:280: recipe for target 'spl/common/spl/spl_nand.o' failed^M
make[2]: *** [spl/common/spl/spl_nand.o] Error 1^M
make[2]: *** Waiting for unfinished jobs....^Mscripts/Makefile.spl:300: recipe for target 'spl/common/spl' failed^M make[1]: *** [spl/common/spl] Error 2^M
make[1]: *** Waiting for unfinished jobs....^M
Makefile:1334: recipe for target 'spl/u-boot-spl' failed^M
make: *** [spl/u-boot-spl] Error 2^M
make: *** Waiting for unfinished jobs....^M
hs at pollux [ 7:24:26] ttbott>
Quoted 4 lines
testing board
am335x_boneblack_vboot21 / 1189all boards takes a while ... but it seems there is an issue with SPL builds...
I'm not sure what is going on here. My build was clean.
I'll try again with v3.
Quoted 6 lines
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Regards,
Simon