network/geneve: add performance test for geneve tunnel

index a64028b..963d8c5 100644
@@ -37,3 +37,6 @@ gre_ipv6_01 gre01.sh -6
 
 dctcp_ipv4_01 dctcp01.sh
 dctcp_ipv6_01 dctcp01.sh -6
+
+geneve01 geneve01.sh
+geneve01_ipv6 geneve01.sh -6

index 54e374f..9a97a82 100644
@@ -19,6 +19,7 @@ top_srcdir		?= ../../..
 include $(top_srcdir)/include/mk/env_pre.mk
 
 INSTALL_TARGETS		:= ipvlan01.sh \
+			   geneve01.sh \
 			   gre01.sh \
 			   macvlan01.sh \
 			   macvtap01.sh \

59 lines not on this page · raw message

index 2a46076..1757698 100644
@@ -110,6 +110,9 @@ virt_add()
 		[ -z "$opt" ] && opt="id 4094"
 		[ "$vxlan_dstport" -eq 1 ] && opt="dstport 0 $opt"
 	;;
+	geneve)
+		[ -z "$opt" ] && opt="id 4094 remote $(tst_ipaddr rhost)"
+	;;
 	gre|ip6gre)
 		[ -z "$opt" ] && \
 			opt="remote $(tst_ipaddr rhost) dev $(tst_iface)"

@@ -117,7 +120,7 @@ virt_add()
 	esac
 
 	case $virt_type in
-	vxlan)
+	vxlan|geneve)
 		ip li add $vname type $virt_type $opt
 	;;
 	gre|ip6gre)

@@ -133,7 +136,7 @@ virt_add_rhost()
 {
 	local opt=""
 	case $virt_type in
-	vxlan)
+	vxlan|geneve)
 		[ "$vxlan_dstport" -eq 1 ] && opt="dstport 0"
 		tst_rhost_run -s -c "ip li add ltp_v0 type $virt_type $@ $opt"
 	;;

@@ -237,7 +240,7 @@ vxlan_setup_subnet_uni()
 	tst_kvercmp 3 10 0 && \
 		tst_brkm TCONF "test must be run with kernel 3.10 or newer"
 
-	[ "$(ip li add type vxlan help 2>&1 | grep remote)" ] || \
+	[ "$(ip li add type $virt_type help 2>&1 | grep remote)" ] || \
 		tst_brkm TCONF "iproute doesn't support remote unicast address"
 
 	local opt="$1 remote $(tst_ipaddr rhost)"

@@ -301,13 +304,13 @@ virt_compare_netperf()
 	per6=$(( $vt6 * 100 / $lt - 100 ))
 
 	case "$virt_type" in
-	vxlan)
-		tst_resm TINFO "IPv4 VxLAN over IPv$ipver slower by $per %"
-		tst_resm TINFO "IPv6 VxLAN over IPv$ipver slower by $per6 %"
+	vxlan|geneve)
+		tst_resm TINFO "IP4 $virt_type over IP$ipver slower by $per %"
+		tst_resm TINFO "IP6 $virt_type over IP$ipver slower by $per6 %"
 	;;
 	*)
-		tst_resm TINFO "IPv4 $virt_type slower by $per %"
-		tst_resm TINFO "IPv6 $virt_type slower by $per6 %"
+		tst_resm TINFO "IP4 $virt_type slower by $per %"
+		tst_resm TINFO "IP6 $virt_type slower by $per6 %"
 	esac
 
 	if [ "$per" -ge "$VIRT_PERF_THRESHOLD" -o \

@@ -388,7 +391,7 @@ virt_test_02()
 tst_require_root
 
 case "$virt_type" in
-vxlan)
+vxlan|geneve)
 	tst_kvercmp 3 8 0 && \
 		tst_brkm TCONF "test must be run with kernel 3.8 or newer"