Package C states over Haswell platform
Rony Ross
Hi,
I'm working on DELL E7440 platform (Haswell based) with dual OS: Windows 8.1 and Ubuntu 14.04.1 (based on 3.13).
When I use Win 8.1, using BLA I get ~90% PC7 when idle. However, when I use the Ubuntu, using powertop I get only as high as PC3.
Since it's the same platform, it seems to rule out a HW issue. Any idea what can be the problem? Is Haswell fully supported by powertop?
Package | Core | CPU 0 CPU 2
| | C0 active 0.2% 0.1%
| | POLL 0.0% 0.0 ms 0.0%
0.0 ms
| | C1E-HSW 0.0% 0.1 ms 0.0%
0.0 ms
C2 (pc2) 0.1% | |
C3 (pc3) 3.7% | C3 (cc3) 0.0% | C3-HSW 0.0% 0.4 ms 0.0%0.4 ms
C6 (pc6) 0.0% | C6 (cc6) 0.0% | C6-HSW 0.0% 0.0 ms 0.0%
0.2 ms
C7 (pc7) 0.0% | C7 (cc7) 99.0% | C7s-HSW 0.1% 0.9 ms 0.1%
1.8 ms
C8 (pc8) 0.0% | | C8-HSW 0.1% 1.4 ms 0.2%
2.5 ms
C9 (pc9) 0.0% | | C9-HSW 0.4% 4.0 ms 2.3%
8.0 ms
C10 (pc10) 0.0% | | C10-HSW 98.9% 44.5 ms 97.0%
36.5 ms
| Core | CPU 1 CPU 3
| | C0 active 0.2% 0.1%
| | POLL 0.0% 0.0 ms 0.0%
0.0 ms
| | C1E-HSW 0.0% 0.0 ms 1.0%
50.1 ms
| |
| C3 (cc3) 0.0% | C3-HSW 0.0% 0.7 ms 0.0%
0.6 ms
| C6 (cc6) 0.0% | C6-HSW 0.0% 0.5 ms 0.0%
0.0 ms
| C7 (cc7) 98.0% | C7s-HSW 0.1% 0.7 ms 0.4%
25.7 ms
| | C8-HSW 0.0% 4.9 ms 0.0%
1.5 ms
| | C9-HSW 0.6% 4.7 ms 0.7%
19.5 ms
| | C10-HSW 98.5% 93.5 ms 97.8%78.0 ms
| GPU |
| |
| Powered On 12.1% |
| RC6 87.9% |
| RC6p 0.0% |
| RC6pp 0.0% |Thanks
Rony
Arjan van de Ven
Quoted 4 lines · Rony Ross
I'm working on DELL E7440 platform (Haswell based) with dual OS: Windows 8.1 and Ubuntu 14.04.1 (based on 3.13). When I use Win 8.1, using BLA I get ~90% PC7 when idle. However, when I use the Ubuntu, using powertop I get only as high as PC3. Since it's the same platform, it seems to rule out a HW issue. Any idea what can be the problem? Is Haswell fully supported by powertop?
likely some device is not going to a low power state, which then blocks PC7. Powertop should be able to tell you which device that is
Kalowsky
Not completely true for a 1:1 comparison.
Verify that your WiFi is entering D3, as earlier testing showed Dell specific WiFi parts (on Linux) were not enabling ASPM. On Windows this is enabled by the driver.
Best walk through for it: http://wireless.kernel.org/en/users/Documentation/ASPM
From: PowerTop [mailto:powertop-bounces(a)lists.01.org] On Behalf Of Rony Ross
Sent: Tuesday, October 28, 2014 9:21 AM
To: powertop(a)lists.01.org
Subject: [Powertop] Package C states over Haswell platform
Hi,
I'm working on DELL E7440 platform (Haswell based) with dual OS: Windows 8.1 and Ubuntu 14.04.1 (based on 3.13). When I use Win 8.1, using BLA I get ~90% PC7 when idle. However, when I use the Ubuntu, using powertop I get only as high as PC3. Since it's the same platform, it seems to rule out a HW issue. Any idea what can be the problem? Is Haswell fully supported by powertop?
Package | Core | CPU 0 CPU 2
| | C0 active 0.2% 0.1%
| | POLL 0.0% 0.0 ms 0.0% 0.0 ms
| | C1E-HSW 0.0% 0.1 ms 0.0% 0.0 ms
C2 (pc2) 0.1% | |
C3 (pc3) 3.7% | C3 (cc3) 0.0% | C3-HSW 0.0% 0.4 ms 0.0% 0.4 ms
C6 (pc6) 0.0% | C6 (cc6) 0.0% | C6-HSW 0.0% 0.0 ms 0.0% 0.2 ms
C7 (pc7) 0.0% | C7 (cc7) 99.0% | C7s-HSW 0.1% 0.9 ms 0.1% 1.8 ms
C8 (pc8) 0.0% | | C8-HSW 0.1% 1.4 ms 0.2% 2.5 ms
C9 (pc9) 0.0% | | C9-HSW 0.4% 4.0 ms 2.3% 8.0 ms
C10 (pc10) 0.0% | | C10-HSW 98.9% 44.5 ms 97.0% 36.5 ms | Core | CPU 1 CPU 3
| | C0 active 0.2% 0.1%
| | POLL 0.0% 0.0 ms 0.0% 0.0 ms
| | C1E-HSW 0.0% 0.0 ms 1.0% 50.1 ms
| |
| C3 (cc3) 0.0% | C3-HSW 0.0% 0.7 ms 0.0% 0.6 ms
| C6 (cc6) 0.0% | C6-HSW 0.0% 0.5 ms 0.0% 0.0 ms
| C7 (cc7) 98.0% | C7s-HSW 0.1% 0.7 ms 0.4% 25.7 ms
| | C8-HSW 0.0% 4.9 ms 0.0% 1.5 ms
| | C9-HSW 0.6% 4.7 ms 0.7% 19.5 ms
| | C10-HSW 98.5% 93.5 ms 97.8% 78.0 ms | GPU |
| |
| Powered On 12.1% |
| RC6 87.9% |
| RC6p 0.0% |
| RC6pp 0.0% |Thanks
Rony
Alexandra Yates
Quoted 80 lines
Hi,
I'm working on DELL E7440 platform (Haswell based) with dual OS: Windows 8.1
and Ubuntu 14.04.1 (based on 3.13).
When I use Win 8.1, using BLA I get ~90% PC7 when idle. However, when I use
the Ubuntu, using powertop I get only as high as PC3.
Since it's the same platform, it seems to rule out a HW issue. Any idea what
can be the problem? Is Haswell fully supported by powertop?Package | Core | CPU 0 CPU 2 | | C0 active 0.2% 0.1% | | POLL 0.0% 0.0 ms0.0%
0.0 ms
| | C1E-HSW 0.0% 0.1 ms
0.0%
0.0 msC2 (pc2) 0.1% | | C3 (pc3) 3.7% | C3 (cc3) 0.0% | C3-HSW 0.0% 0.4 ms0.0%
0.4 ms
C6 (pc6) 0.0% | C6 (cc6) 0.0% | C6-HSW 0.0% 0.0 ms
0.0%
0.2 ms
C7 (pc7) 0.0% | C7 (cc7) 99.0% | C7s-HSW 0.1% 0.9 ms
0.1%
1.8 ms
C8 (pc8) 0.0% | | C8-HSW 0.1% 1.4 ms
0.2%
2.5 ms
C9 (pc9) 0.0% | | C9-HSW 0.4% 4.0 ms
2.3%
8.0 ms
C10 (pc10) 0.0% | | C10-HSW 98.9% 44.5 ms
97.0%
36.5 ms| Core | CPU 1 CPU 3 | | C0 active 0.2% 0.1% | | POLL 0.0% 0.0 ms0.0%
0.0 ms
| | C1E-HSW 0.0% 0.0 ms
1.0%
50.1 ms| | | C3 (cc3) 0.0% | C3-HSW 0.0% 0.7 ms 0.0% 0.6 ms | C6 (cc6) 0.0% | C6-HSW 0.0% 0.5 ms 0.0% 0.0 ms | C7 (cc7) 98.0% | C7s-HSW 0.1% 0.7 ms0.4%
25.7 ms
| | C8-HSW 0.0% 4.9 ms
0.0%
1.5 ms
| | C9-HSW 0.6% 4.7 ms
0.7%
19.5 ms| | C10-HSW 98.5% 93.5 ms97.8%
78.0 ms| GPU | | | | Powered On 12.1% | | RC6 87.9% | | RC6p 0.0% | | RC6pp 0.0% |Thanks
Quoted 7 lines
Rony
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop
Hi Rony,
Interesting you ask this since I presented at the Open source bridge conference how to optimize your computer in terms of power using power top, as an example I used a Haswell box with Ubuntu. I also presented on the Debian conference a similar talk using Debian distro.
There are few things that may be happening.
1- I would suggest to update to the latest kernel 3.17. From 3.13 to 3.17 there have been few bug fixes that help linux in terms of power management.
2-At the boot command line of your kernel add the following settings:
Thank you,
Alexandra.