x86/pmu: Fixes and improvements
Sean Christopherson
reviewerv7 cover x86/pmu: Fixes and improvements
v7 of Dapeng's PMU fixes/cleanups series. FWIW, I haven't gone through the changes all that carefully, I mostly focused on the high level "what" and the style.
This blows up without the per-CPU fixes:
https://lore.kernel.org/all/[email protected]
v7:
- Rewrite the changelog for the patch that shrinks the size of pmu_counter_t.
- Cosmetic changes.
v6: https://lore.kernel.org/all/[email protected]
Dapeng Mi (17):
x86: pmu: Remove blank line and redundant space
x86: pmu: Refine fixed_events[] names
x86: pmu: Align fields in pmu_counter_t to better pack the struct
x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()
x86: pmu: Print measured event count if test fails
x86: pmu: Fix potential out of bound access for fixed events
x86: pmu: Fix cycles event validation failure
x86: pmu: Use macro to replace hard-coded branches event index
x86: pmu: Use macro to replace hard-coded ref-cycles event index
x86: pmu: Use macro to replace hard-coded instructions event index
x86: pmu: Enable and disable PMCs in loop() asm blob
x86: pmu: Improve instruction and branches events verification
x86: pmu: Improve LLC misses event verification
x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy
CPUs
x86: pmu: Add IBPB indirect jump asm blob
x86: pmu: Adjust lower boundary of branch-misses event
x86: pmu: Optimize emulated instruction validation
Xiong Zhang (1):
x86: pmu: Remove duplicate code in pmu_init()
lib/x86/pmu.c | 5 - x86/pmu.c | 423 ++++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 342 insertions(+), 86 deletions(-)
base-commit: f77fb696cfd0e4a5562cdca189be557946bf522f
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 1/18 x86: pmu: Remove duplicate code in pmu_init()
From: Xiong Zhang <[email protected]>
There are totally same code in pmu_init() helper, remove the duplicate code.
--- lib/x86/pmu.c | 5 ----- 1 file changed, 5 deletions(-)
lib/x86/pmu.c +0 -5
@@ -16,11 +16,6 @@ void pmu_init(void) pmu.fixed_counter_width = (cpuid_10.d >>5 ) &0xff ; } -if (pmu.version >1 ) { - pmu.nr_fixed_counters = cpuid_10.d &0x1f ; - pmu.fixed_counter_width = (cpuid_10.d >>5 ) &0xff ; - } - pmu.nr_gp_counters = (cpuid_10.a >>8 ) &0xff ; pmu.gp_counter_width = (cpuid_10.a >>16 ) &0xff ; pmu.gp_counter_mask_length = (cpuid_10.a >>24 ) &0xff ;
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 2/18 x86: pmu: Remove blank line and redundant space
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
code style changes.
--- x86/pmu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
x86/pmu.c +1 -2
@@ -205,8 +205,7 @@ static noinline void __measure(pmu_counter_t *evt, uint64_t count)static bool verify_event (uint64_t count,struct pmu_event *e) {// printf("%d <= %ld <= %d\n", e->min, count, e->max); -return count >= e->min && count <= e->max; - +return count >= e->min && count <= e->max; }static bool verify_counter (pmu_counter_t *cnt)
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 3/18 x86: pmu: Refine fixed_events[] names
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
In SDM the fixed counter is numbered from 0 but currently the fixed_events names are numbered from 1. It would cause confusion for users. So Change the fixed_events[] names to number from 0 as well and keep identical with SDM.
--- x86/pmu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
x86/pmu.c +3 -3
@@ -45,9 +45,9 @@ struct pmu_event { {"branches", 0x00c2, 1*N, 1.1*N}, {"branch misses", 0x00c3, 0, 0.1*N}, }, fixed_events[] = { - {"fixed 1", MSR_CORE_PERF_FIXED_CTR0, 10*N, 10.2*N}, - {"fixed 2", MSR_CORE_PERF_FIXED_CTR0 + 1, 1*N, 30*N}, - {"fixed 3", MSR_CORE_PERF_FIXED_CTR0 + 2, 0.1*N, 30*N} + {"fixed 0", MSR_CORE_PERF_FIXED_CTR0, 10*N, 10.2*N}, + {"fixed 1", MSR_CORE_PERF_FIXED_CTR0 + 1, 1*N, 30*N}, + {"fixed 2", MSR_CORE_PERF_FIXED_CTR0 + 2, 0.1*N, 30*N} };char *buf;
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 4/18 x86: pmu: Align fields in pmu_counter_t to better pack the struct
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Hoist "idx" up in the pmu_counter_t structure so that the structure is naturally packed for 64-bit builds.
--- x86/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
x86/pmu.c +1 -1
@@ -21,9 +21,9 @@typedef struct {uint32_t ctr; +uint32_t idx;uint64_t config;uint64_t count; -int idx; }pmu_counter_t ;struct pmu_event {
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Re: [kvm-unit-tests PATCH v7 04/18] x86: pmu: Align fields in pmu_counter_t to better pack the struct
Quoted 9 lines · Sean Christopherson
From: Dapeng Mi <[email protected]>
Hoist "idx" up in the
pmu_counter_tstructure so that the structure is naturally packed for 64-bit builds.Signed-off-by Dapeng Mi <[email protected]>[sean: rewrite changelog]Signed-off-by Sean Christopherson <[email protected]>
Thanks for root causing the issue and rewriting the change log.
Quoted 19 lines
--- x86/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)x86/pmu.c +1
-1@@ -21,9 +21,9 @@typedef struct {uint32_t ctr; +uint32_t idx;uint64_t config;uint64_t count; -int idx; }pmu_counter_t ;struct pmu_event {
Sean Christopherson
reviewerPATCH v7 5/18 x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Considering there are already 8 GP counters and 4 fixed counters on latest Intel processors, like Sapphire Rapids. The original cnt[] array length 10 is definitely not enough to cover all supported PMU counters on these new processors even through currently KVM only supports 3 fixed counters at most. This would cause out of bound memory access and may trigger false alarm on PMU counter validation
It's probably more and more GP and fixed counters are introduced in the future and then directly extends the cnt[] array length to 48 once and for all. Base on the layout of IA32_PERF_GLOBAL_CTRL and IA32_PERF_GLOBAL_STATUS, 48 looks enough in near feature.
--- x86/pmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
x86/pmu.c +2 -1
@@ -255,7 +255,7 @@ static void check_fixed_counters(void)static void check_counters_many (void ) { -pmu_counter_t cnt[10 ]; +pmu_counter_t cnt[48 ];int i, n;for (i =0 , n =0 ; n < pmu.nr_gp_counters; i++) {
@@ -273,6 +273,7 @@ static void check_counters_many(void) n++; } +assert (n <=ARRAY_SIZE (cnt));measure_many (cnt, n);for (i =0 ; i < n; i++)
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 6/18 x86: pmu: Print measured event count if test fails
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Print the measured event count if the test case fails. This helps users quickly know why the test case fails.
--- x86/pmu.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
x86/pmu.c +6 -2
@@ -204,8 +204,12 @@ static noinline void __measure(pmu_counter_t *evt, uint64_t count)static bool verify_event (uint64_t count,struct pmu_event *e) { -// printf("%d <= %ld <= %d\n", e->min, count, e->max); -return count >= e->min && count <= e->max; +bool pass = count >= e->min && count <= e->max; + +if (!pass) +printf ("FAIL: %d <= %" PRId64" <= %d\n" , e->min, count, e->max); + +return pass; }static bool verify_counter (pmu_counter_t *cnt)
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 7/18 x86: pmu: Fix potential out of bound access for fixed events
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Current PMU code doesn't check whether PMU fixed counter number is larger than pre-defined fixed events. If so, it would cause memory access out of range.
So limit validated fixed counters number to MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events)) and print message to warn that KUT/pmu tests need to be updated if fixed counters number exceeds defined fixed events number.
--- x86/pmu.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)
x86/pmu.c +21 -6
@@ -54,6 +54,7 @@ char *buf;static struct pmu_event *gp_events;static unsigned int gp_events_size; +static unsigned int fixed_counters_num;static inline void loop (void ) {
@@ -113,8 +114,12 @@ static struct pmu_event* get_counter_event(pmu_counter_t *cnt)for (i =0 ; i < gp_events_size; i++)if (gp_events[i].unit_sel == (cnt->config &0xffff ))return &gp_events[i]; - }else -return &fixed_events[cnt->ctr -MSR_CORE_PERF_FIXED_CTR0 ]; + }else { +unsigned int idx = cnt->ctr -MSR_CORE_PERF_FIXED_CTR0 ; + +if (idx <ARRAY_SIZE (fixed_events)) +return &fixed_events[idx]; + }return (void *)0 ; }
@@ -204,8 +209,12 @@ static noinline void __measure(pmu_counter_t *evt, uint64_t count)static bool verify_event (uint64_t count,struct pmu_event *e) { -bool pass = count >= e->min && count <= e->max; +bool pass; +if (!e) +return false; + + pass = count >= e->min && count <= e->max;if (!pass)printf ("FAIL: %d <= %" PRId64" <= %d\n" , e->min, count, e->max);
@@ -250,7 +259,7 @@ static void check_fixed_counters(void) };int i; -for (i =0 ; i < pmu.nr_fixed_counters; i++) { +for (i =0 ; i < fixed_counters_num; i++) { cnt.ctr = fixed_events[i].unit_sel;measure_one (&cnt);report (verify_event (cnt.count, &fixed_events[i]),"fixed-%d" , i);
@@ -271,7 +280,7 @@ static void check_counters_many(void) gp_events[i % gp_events_size].unit_sel; n++; } -for (i =0 ; i < pmu.nr_fixed_counters; i++) { +for (i =0 ; i < fixed_counters_num; i++) { cnt[n].ctr = fixed_events[i].unit_sel; cnt[n].config =EVNTSEL_OS |EVNTSEL_USR ; n++;
@@ -420,7 +429,7 @@ static void check_rdpmc(void)else report (cnt.count == (u32 )val,"fast-%d" , i); } -for (i =0 ; i < pmu.nr_fixed_counters; i++) { +for (i =0 ; i < fixed_counters_num; i++) {uint64_t x = val & ((1ull << pmu.fixed_counter_width) -1 );pmu_counter_t cnt = { .ctr = MSR_CORE_PERF_FIXED_CTR0 + i,
@@ -745,6 +754,12 @@ int main(int ac, char **av)printf ("Fixed counters: %d\n" , pmu.nr_fixed_counters);printf ("Fixed counter width: %d\n" , pmu.fixed_counter_width); + fixed_counters_num =MIN (pmu.nr_fixed_counters,ARRAY_SIZE (fixed_events)); +if (pmu.nr_fixed_counters >ARRAY_SIZE (fixed_events)) +report_info ("Fixed counters number %d > defined fixed events %u. " +"Please update test case." , pmu.nr_fixed_counters, + (uint32_t )ARRAY_SIZE (fixed_events)); +apic_write (APIC_LVTPC ,PMI_VECTOR );check_counters ();
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 8/18 x86: pmu: Fix cycles event validation failure
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
When running pmu test on SPR, sometimes the following failure is reported.
PMU version: 2 GP counters: 8 GP counter width: 48 Mask length: 8 Fixed counters: 3 Fixed counter width: 48
1000000 <= 55109398 <= 50000000
FAIL: Intel: core cycles-0
1000000 <= 18279571 <= 50000000
PASS: Intel: core cycles-1
1000000 <= 12238092 <= 50000000
PASS: Intel: core cycles-2
1000000 <= 7981727 <= 50000000
PASS: Intel: core cycles-3
1000000 <= 6984711 <= 50000000
PASS: Intel: core cycles-4
1000000 <= 6773673 <= 50000000
PASS: Intel: core cycles-5
1000000 <= 6697842 <= 50000000
PASS: Intel: core cycles-6
1000000 <= 6747947 <= 50000000
PASS: Intel: core cycles-7
The count of the "core cycles" on first counter would exceed the upper boundary and leads to a failure, and then the "core cycles" count would drop gradually and reach a stable state.
That looks reasonable. The "core cycles" event is defined as the 1st event in xxx_gp_events[] array and it is always verified at first. when the program loop() is executed at the first time it needs to warm up the pipeline and cache, such as it has to wait for cache is filled. All these warm-up work leads to a quite large core cycles count which may exceeds the verification range.
To avoid the false positive of cycles event caused by warm-up, explicitly introduce a warm-up state before really starting verification.
--- x86/pmu.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
x86/pmu.c +16 -0
@@ -603,11 +603,27 @@ static void check_tsx_cycles(void)report_prefix_pop (); } +static void warm_up (void ) +{ +int i; + +/* +* Since cycles event is always run as the first event, there would be +* a warm-up state to warm up the cache, it leads to the measured cycles +* value may exceed the pre-defined cycles upper boundary and cause +* false positive. To avoid this, introduce an warm-up state before +* the real verification. +*/ +for (i =0 ; i <10 ; i++) +loop (); +} +static void check_counters (void ) {if (is_fep_available ())check_emulated_instr (); +warm_up ();check_gp_counters ();check_fixed_counters ();check_rdpmc ();
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 9/18 x86: pmu: Use macro to replace hard-coded branches event index
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Currently the branches event index is a hard-coded number. User could add new events and cause the branches event index changes in the future, but don't notice the hard-coded event index and forget to update the event index synchronously, then the issue comes.
Thus, replace the hard-coded index to a macro.
--- x86/pmu.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
x86/pmu.c +18 -1
@@ -50,6 +50,22 @@ struct pmu_event { {"fixed 2", MSR_CORE_PERF_FIXED_CTR0 + 2, 0.1*N, 30*N} }; +/* +* Events index in intel_gp_events[], ensure consistent with +* intel_gp_events[]. +*/ +enum { +INTEL_BRANCHES_IDX =5 , +}; + +/* +* Events index in amd_gp_events[], ensure consistent with +* amd_gp_events[]. +*/ +enum { +AMD_BRANCHES_IDX =2 , +}; +char *buf;static struct pmu_event *gp_events;
@@ -493,7 +509,8 @@ static void check_emulated_instr(void) {uint64_t status, instr_start, brnch_start;uint64_t gp_counter_width = (1ull << pmu.gp_counter_width) -1 ; -unsigned int branch_idx = pmu.is_intel ?5 :2 ; +unsigned int branch_idx = pmu.is_intel ? +INTEL_BRANCHES_IDX :AMD_BRANCHES_IDX ;pmu_counter_t brnch_cnt = { .ctr =MSR_GP_COUNTERx (0 ),/* branch instructions */
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 10/18 x86: pmu: Use macro to replace hard-coded ref-cycles event index
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Replace hard-coded ref-cycles event index with macro to avoid possible mismatch issue if new event is added in the future and cause ref-cycles event index changed, but forget to update the hard-coded ref-cycles event index.
--- x86/pmu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
x86/pmu.c +7 -3
@@ -55,6 +55,7 @@ struct pmu_event {* intel_gp_events[]. */ enum { +INTEL_REF_CYCLES_IDX =2 ,INTEL_BRANCHES_IDX =5 , };
@@ -709,7 +710,8 @@ static void set_ref_cycle_expectations(void) {pmu_counter_t cnt = { .ctr =MSR_IA32_PERFCTR0 , - .config =EVNTSEL_OS |EVNTSEL_USR | intel_gp_events[2 ].unit_sel, + .config =EVNTSEL_OS |EVNTSEL_USR | + intel_gp_events[INTEL_REF_CYCLES_IDX ].unit_sel, };uint64_t tsc_delta;uint64_t t0, t1, t2, t3;
@@ -745,8 +747,10 @@ static void set_ref_cycle_expectations(void)if (!tsc_delta)return ; - intel_gp_events[2 ].min = (intel_gp_events[2 ].min * cnt.count) / tsc_delta; - intel_gp_events[2 ].max = (intel_gp_events[2 ].max * cnt.count) / tsc_delta; + intel_gp_events[INTEL_REF_CYCLES_IDX ].min = + (intel_gp_events[INTEL_REF_CYCLES_IDX ].min * cnt.count) / tsc_delta; + intel_gp_events[INTEL_REF_CYCLES_IDX ].max = + (intel_gp_events[INTEL_REF_CYCLES_IDX ].max * cnt.count) / tsc_delta; }static void check_invalid_rdpmc_gp (void )
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 11/18 x86: pmu: Use macro to replace hard-coded instructions event index
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Replace hard-coded instruction event index with macro to avoid possible mismatch issue if new event is added in the future and cause instructions event index changed, but forget to update the hard-coded event index.
--- x86/pmu.c | 34 +++++++++++++++++++++++++++------- 1 file changed, 27 insertions(+), 7 deletions(-)
x86/pmu.c +27 -7
@@ -55,6 +55,7 @@ struct pmu_event {* intel_gp_events[]. */ enum { +INTEL_INSTRUCTIONS_IDX =1 ,INTEL_REF_CYCLES_IDX =2 ,INTEL_BRANCHES_IDX =5 , };
@@ -64,6 +65,7 @@ enum {* amd_gp_events[]. */ enum { +AMD_INSTRUCTIONS_IDX =1 ,AMD_BRANCHES_IDX =2 , };
@@ -329,11 +331,16 @@ static uint64_t measure_for_overflow(pmu_counter_t *cnt)static void check_counter_overflow (void ) { +int i;uint64_t overflow_preset; -int i; +int instruction_idx = pmu.is_intel ? +INTEL_INSTRUCTIONS_IDX : +AMD_INSTRUCTIONS_IDX ; +pmu_counter_t cnt = { .ctr =MSR_GP_COUNTERx (0 ), - .config =EVNTSEL_OS |EVNTSEL_USR | gp_events[1 ].unit_sel/* instructions */ , + .config =EVNTSEL_OS |EVNTSEL_USR | + gp_events[instruction_idx].unit_sel/* instructions */ , }; overflow_preset =measure_for_overflow (&cnt);
@@ -389,13 +396,18 @@ static void check_counter_overflow(void)static void check_gp_counter_cmask (void ) { +int instruction_idx = pmu.is_intel ? +INTEL_INSTRUCTIONS_IDX : +AMD_INSTRUCTIONS_IDX ; +pmu_counter_t cnt = { .ctr =MSR_GP_COUNTERx (0 ), - .config =EVNTSEL_OS |EVNTSEL_USR | gp_events[1 ].unit_sel/* instructions */ , + .config =EVNTSEL_OS |EVNTSEL_USR | + gp_events[instruction_idx].unit_sel/* instructions */ , }; cnt.config |= (0x2 <<EVNTSEL_CMASK_SHIFT );measure_one (&cnt); -report (cnt.count < gp_events[1 ].min,"cmask" ); +report (cnt.count < gp_events[instruction_idx].min,"cmask" ); }static void do_rdpmc_fast (void *ptr)
@@ -470,9 +482,14 @@ static void check_running_counter_wrmsr(void) {uint64_t status;uint64_t count; +unsigned int instruction_idx = pmu.is_intel ? +INTEL_INSTRUCTIONS_IDX : +AMD_INSTRUCTIONS_IDX ; +pmu_counter_t evt = { .ctr =MSR_GP_COUNTERx (0 ), - .config =EVNTSEL_OS |EVNTSEL_USR | gp_events[1 ].unit_sel, + .config =EVNTSEL_OS |EVNTSEL_USR | + gp_events[instruction_idx].unit_sel, };report_prefix_push ("running counter wrmsr" );
@@ -481,7 +498,7 @@ static void check_running_counter_wrmsr(void)loop ();wrmsr (MSR_GP_COUNTERx (0 ),0 );stop_event (&evt); -report (evt.count < gp_events[1 ].min,"cntr" ); +report (evt.count < gp_events[instruction_idx].min,"cntr" );/* clear status before overflow test */ if (this_cpu_has_perf_global_status ())
@@ -512,6 +529,9 @@ static void check_emulated_instr(void)uint64_t gp_counter_width = (1ull << pmu.gp_counter_width) -1 ;unsigned int branch_idx = pmu.is_intel ?INTEL_BRANCHES_IDX :AMD_BRANCHES_IDX ; +unsigned int instruction_idx = pmu.is_intel ? +INTEL_INSTRUCTIONS_IDX : +AMD_INSTRUCTIONS_IDX ;pmu_counter_t brnch_cnt = { .ctr =MSR_GP_COUNTERx (0 ),/* branch instructions */
@@ -520,7 +540,7 @@ static void check_emulated_instr(void)pmu_counter_t instr_cnt = { .ctr =MSR_GP_COUNTERx (1 ),/* instructions */ - .config =EVNTSEL_OS |EVNTSEL_USR | gp_events[1 ].unit_sel, + .config =EVNTSEL_OS |EVNTSEL_USR | gp_events[instruction_idx].unit_sel, };report_prefix_push ("emulated instruction" );
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 12/18 x86: pmu: Enable and disable PMCs in loop() asm blob
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Currently enabling PMCs, executing loop() and disabling PMCs are divided 3 separated functions. So there could be other instructions executed between enabling PMCS and running loop() or running loop() and disabling PMCs, e.g. if there are multiple counters enabled in measure_many() function, the instructions which enabling the 2nd and more counters would be counted in by the 1st counter.
So current implementation can only verify the correctness of count by an rough range rather than a precise count even for instructions and branches events. Strictly speaking, this verification is meaningless as the test could still pass even though KVM vPMU has something wrong and reports an incorrect instructions or branches count which is in the rough range.
Thus, move the PMCs enabling and disabling into the loop() asm blob and ensure only the loop asm instructions would be counted, then the instructions or branches events can be verified with an precise count instead of an rough range.
--- x86/pmu.c | 80 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 65 insertions(+), 15 deletions(-)
x86/pmu.c +65 -15
@@ -19,6 +19,15 @@#define EXPECTED_INSTR 17#define EXPECTED_BRNCH 5 +#define LOOP_ASM (_wrmsr) \ + _wrmsr "\n\t" \ + "mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t" \ + "1: mov (%1), %2; add $64, %1;\n\t" \ + "nop; nop; nop; nop; nop; nop; nop;\n\t" \ + "loop 1b;\n\t" \ + "mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t" \ + _wrmsr "\n\t" + typedef struct { uint32_t ctr; uint32_t idx;
@@ -75,13 +84,43 @@ static struct pmu_event *gp_events;static unsigned int gp_events_size;static unsigned int fixed_counters_num; -static inline void loop (void ) + +static inline void __loop (void ) +{ +unsigned long tmp, tmp2, tmp3; + + asm volatile(LOOP_ASM("nop") + : "=c"(tmp), "=r"(tmp2), "=r"(tmp3) + : "0"(N), "1"(buf)); +} + +/* +* Enable and disable counters in a whole asm blob to ensure +* no other instructions are counted in the window between +* counters enabling and really LOOP_ASM code executing. +* Thus counters can verify instructions and branches events +* against precise counts instead of a rough valid count range. +*/ +static inline void __precise_loop (u64 cntrs) {unsigned long tmp, tmp2, tmp3; +unsigned int global_ctl = pmu.msr_global_ctl; +u32 eax = cntrs & (BIT_ULL (32 ) -1 ); +u32 edx = cntrs >>32 ; - asmvolatile ("1: mov (%1), %2; add $64, %1; nop; nop; nop; nop; nop; nop; nop; loop 1b" - :"=c" (tmp),"=r" (tmp2),"=r" (tmp3):"0" (N ),"1" (buf)); + asm volatile(LOOP_ASM("wrmsr") + : "=b"(tmp), "=r"(tmp2), "=r"(tmp3) + : "a"(eax), "d"(edx), "c"(global_ctl), + "0"(N), "1"(buf) + : "edi"); +} +static inline void loop (u64 cntrs) +{ +if (!this_cpu_has_perf_global_ctrl ()) +__loop (); +else +__precise_loop (cntrs); }volatile uint64_t irq_received;
@@ -181,18 +220,17 @@ static void __start_event(pmu_counter_t *evt, uint64_t count) ctrl = (ctrl & ~(0xf << shift)) | (usrospmi << shift);wrmsr (MSR_CORE_PERF_FIXED_CTR_CTRL , ctrl); } -global_enable (evt);apic_write (APIC_LVTPC ,PMI_VECTOR ); }static void start_event (pmu_counter_t *evt) {__start_event (evt,0 ); +global_enable (evt); } -static void stop_event (pmu_counter_t *evt) +static void __stop_event (pmu_counter_t *evt) { -global_disable (evt);if (is_gp (evt)) {wrmsr (MSR_GP_EVENT_SELECTx (event_to_global_idx (evt)), evt->config & ~EVNTSEL_EN );
@@ -204,14 +242,24 @@ static void stop_event(pmu_counter_t *evt) evt->count =rdmsr (evt->ctr); } +static void stop_event (pmu_counter_t *evt) +{ +global_disable (evt); +__stop_event (evt); +} + static noinline void measure_many(pmu_counter_t *evt, int count) {int i; +u64 cntrs =0 ; + +for (i =0 ; i < count; i++) { +__start_event (&evt[i],0 ); + cntrs |=BIT_ULL (event_to_global_idx (&evt[i])); + } +loop (cntrs);for (i =0 ; i < count; i++) -start_event (&evt[i]); -loop (); -for (i =0 ; i < count; i++) -stop_event (&evt[i]); +__stop_event (&evt[i]); }static void measure_one (pmu_counter_t *evt)
@@ -221,9 +269,11 @@ static void measure_one(pmu_counter_t *evt) static noinline void __measure(pmu_counter_t *evt, uint64_t count) { +u64 cntrs =BIT_ULL (event_to_global_idx (evt)); +__start_event (evt, count); -loop (); -stop_event (evt); +loop (cntrs); +__stop_event (evt); }static bool verify_event (uint64_t count,struct pmu_event *e)
@@ -495,7 +545,7 @@ static void check_running_counter_wrmsr(void)report_prefix_push ("running counter wrmsr" );start_event (&evt); -loop (); +__loop ();wrmsr (MSR_GP_COUNTERx (0 ),0 );stop_event (&evt);report (evt.count < gp_events[instruction_idx].min,"cntr" );
@@ -512,7 +562,7 @@ static void check_running_counter_wrmsr(void)wrmsr (MSR_GP_COUNTERx (0 ), count); -loop (); +__loop ();stop_event (&evt);if (this_cpu_has_perf_global_status ()) {
@@ -653,7 +703,7 @@ static void warm_up(void)* the real verification. */ for (i =0 ; i <10 ; i++) -loop (); +loop (0 ); }static void check_counters (void )
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 13/18 x86: pmu: Improve instruction and branches events verification
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are moved in __precise_count_loop(). Thus, instructions and branches events can be verified against a precise count instead of a rough range.
Unfortunately, AMD CPUs count VMRUN as a branch instruction in guest context, which leads to intermittent failures as the counts will vary depending on how many asynchronous exits occur while running the measured code, e.g. if the host takes IRQs, NMIs, etc.
So only enable this precise check for Intel processors.
--- x86/pmu.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
x86/pmu.c +33 -0
@@ -19,6 +19,10 @@#define EXPECTED_INSTR 17#define EXPECTED_BRNCH 5 +/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL instructions */ +#define EXTRA_INSNS (3 + 3) +#define LOOP_INSNS (N * 10 + EXTRA_INSNS) +#define LOOP_BRANCHES (N)#define LOOP_ASM (_wrmsr) \ _wrmsr "\n\t" \ "mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t" \
@@ -123,6 +127,27 @@ static inline void loop(u64 cntrs)__precise_loop (cntrs); } +static void adjust_events_range (struct pmu_event *gp_events, +int instruction_idx,int branch_idx) +{ +/* +* If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are +* moved in __precise_loop(). Thus, instructions and branches events +* can be verified against a precise count instead of a rough range. +* +* Skip the precise checks on AMD, as AMD CPUs count VMRUN as a branch +* instruction in guest context, which* leads to intermittent failures +* as the counts will vary depending on how many asynchronous VM-Exits +* occur while running the measured code, e.g. if the host takes IRQs. +*/ +if (pmu.is_intel &&this_cpu_has_perf_global_ctrl ()) { + gp_events[instruction_idx].min =LOOP_INSNS ; + gp_events[instruction_idx].max =LOOP_INSNS ; + gp_events[branch_idx].min =LOOP_BRANCHES ; + gp_events[branch_idx].max =LOOP_BRANCHES ; + } +} +volatile uint64_t irq_received;static void cnt_overflow (isr_regs_t *regs)
@@ -833,6 +858,9 @@ static void check_invalid_rdpmc_gp(void)int main (int ac,char **av) { +int instruction_idx; +int branch_idx; +setup_vm ();handle_irq (PMI_VECTOR , cnt_overflow); buf =malloc (N *64 );
@@ -846,13 +874,18 @@ int main(int ac, char **av) } gp_events = (struct pmu_event *)intel_gp_events; gp_events_size =sizeof (intel_gp_events)/sizeof (intel_gp_events[0 ]); + instruction_idx =INTEL_INSTRUCTIONS_IDX ; + branch_idx =INTEL_BRANCHES_IDX ;report_prefix_push ("Intel" );set_ref_cycle_expectations (); }else { gp_events_size =sizeof (amd_gp_events)/sizeof (amd_gp_events[0 ]); gp_events = (struct pmu_event *)amd_gp_events; + instruction_idx =AMD_INSTRUCTIONS_IDX ; + branch_idx =AMD_BRANCHES_IDX ;report_prefix_push ("AMD" ); } +adjust_events_range (gp_events, instruction_idx, branch_idx);printf ("PMU version: %d\n" , pmu.version);printf ("GP counters: %d\n" , pmu.nr_gp_counters);
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 14/18 x86: pmu: Improve LLC misses event verification
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
When running pmu test on SPR, sometimes the following failure is reported.
1 <= 0 <= 1000000
FAIL: Intel: llc misses-4
Currently The LLC misses occurring only depends on probability. It's possible that there is no LLC misses happened in the whole loop(), especially along with processors have larger and larger cache size just like what we observed on SPR.
Thus, add clflush instruction into the loop() asm blob and ensure once LLC miss is triggered at least.
--- x86/pmu.c | 39 ++++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-)
x86/pmu.c +26 -13
@@ -19,19 +19,30 @@#define EXPECTED_INSTR 17#define EXPECTED_BRNCH 5 -/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL instructions */ -#define EXTRA_INSNS (3 + 3) +/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL + clflush/mfence instructions */ +#define EXTRA_INSNS (3 + 3 +2)#define LOOP_INSNS (N * 10 + EXTRA_INSNS)#define LOOP_BRANCHES (N) -#define LOOP_ASM (_wrmsr) \ +#define LOOP_ASM (_wrmsr, _clflush) \ _wrmsr "\n\t" \ "mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t" \ + _clflush "\n\t" \ + "mfence;\n\t" \ "1: mov (%1), %2; add $64, %1;\n\t" \ "nop; nop; nop; nop; nop; nop; nop;\n\t" \ "loop 1b;\n\t" \ "mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t" \ _wrmsr "\n\t" +#define _loop_asm (_wrmsr, _clflush) \ +do { \ + asm volatile(LOOP_ASM(_wrmsr, _clflush) \ + : "=b"(tmp), "=r"(tmp2), "=r"(tmp3) \ + : "a"(eax), "d"(edx), "c"(global_ctl), \ + "0"(N), "1"(buf) \ + : "edi"); \ +} while (0) + typedef struct { uint32_t ctr; uint32_t idx;
@@ -88,14 +99,17 @@ static struct pmu_event *gp_events;static unsigned int gp_events_size;static unsigned int fixed_counters_num; -static inline void __loop (void ) {unsigned long tmp, tmp2, tmp3; +u32 global_ctl =0 ; +u32 eax =0 ; +u32 edx =0 ; - asm volatile(LOOP_ASM("nop") - : "=c"(tmp), "=r"(tmp2), "=r"(tmp3) - : "0"(N), "1"(buf)); +if (this_cpu_has (X86_FEATURE_CLFLUSH )) +_loop_asm ("nop" ,"clflush (%1)" ); +else +_loop_asm ("nop" ,"nop" ); }/*
@@ -108,15 +122,14 @@ static inline void __loop(void)static inline void __precise_loop (u64 cntrs) {unsigned long tmp, tmp2, tmp3; -unsigned int global_ctl = pmu.msr_global_ctl; +u32 global_ctl = pmu.msr_global_ctl;u32 eax = cntrs & (BIT_ULL (32 ) -1 );u32 edx = cntrs >>32 ; - asm volatile(LOOP_ASM("wrmsr") - : "=b"(tmp), "=r"(tmp2), "=r"(tmp3) - : "a"(eax), "d"(edx), "c"(global_ctl), - "0"(N), "1"(buf) - : "edi"); +if (this_cpu_has (X86_FEATURE_CLFLUSH )) +_loop_asm ("wrmsr" ,"clflush (%1)" ); +else +_loop_asm ("wrmsr" ,"nop" ); }static inline void loop (u64 cntrs)
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 15/18 x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy CPUs
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
For these legacy Intel CPUs without clflush/clflushopt support, there is on way to force to trigger a LLC miss and the measured llc misses is possible to be 0. Thus adjust the lower boundary of llc-misses event to 0 to avoid possible false positive.
--- x86/pmu.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
x86/pmu.c +10 -0
@@ -81,6 +81,7 @@ struct pmu_event {enum {INTEL_INSTRUCTIONS_IDX =1 ,INTEL_REF_CYCLES_IDX =2 , +INTEL_LLC_MISSES_IDX =4 ,INTEL_BRANCHES_IDX =5 , };
@@ -889,6 +890,15 @@ int main(int ac, char **av) gp_events_size =sizeof (intel_gp_events)/sizeof (intel_gp_events[0 ]); instruction_idx =INTEL_INSTRUCTIONS_IDX ; branch_idx =INTEL_BRANCHES_IDX ; + +/* +* For legacy Intel CPUS without clflush/clflushopt support, +* there is no way to force to trigger a LLC miss, thus set +* the minimum value to 0 to avoid false positives. +*/ +if (!this_cpu_has (X86_FEATURE_CLFLUSH )) + gp_events[INTEL_LLC_MISSES_IDX ].min =0 ; +report_prefix_push ("Intel" );set_ref_cycle_expectations (); }else {
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Re: [kvm-unit-tests PATCH v7 15/18] x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy CPUs
Quoted 4 lines · Sean Christopherson
From: Dapeng Mi <[email protected]>
For these legacy Intel CPUs without clflush/clflushopt support, there is on way to force to trigger a LLC miss and the measured llc misses is
a typo: on -> no
Quoted 37 lines
possible to be 0. Thus adjust the lower boundary of llc-misses event to 0 to avoid possible false positive.
Signed-off-by Dapeng Mi <[email protected]>Signed-off-by Sean Christopherson <[email protected]>--- x86/pmu.c | 10 ++++++++++ 1 file changed, 10 insertions(+)x86/pmu.c +10
-0@@ -81,6 +81,7 @@ struct pmu_event {enum {INTEL_INSTRUCTIONS_IDX =1 ,INTEL_REF_CYCLES_IDX =2 , +INTEL_LLC_MISSES_IDX =4 ,INTEL_BRANCHES_IDX =5 , };@@ -889,6 +890,15 @@ int main(int ac, char **av) gp_events_size =sizeof (intel_gp_events)/sizeof (intel_gp_events[0 ]); instruction_idx =INTEL_INSTRUCTIONS_IDX ; branch_idx =INTEL_BRANCHES_IDX ; + +/* +* For legacy Intel CPUS without clflush/clflushopt support, +* there is no way to force to trigger a LLC miss, thus set +* the minimum value to 0 to avoid false positives. +*/ +if (!this_cpu_has (X86_FEATURE_CLFLUSH )) + gp_events[INTEL_LLC_MISSES_IDX ].min =0 ; +report_prefix_push ("Intel" );set_ref_cycle_expectations (); }else {
Sean Christopherson
reviewerPATCH v7 16/18 x86: pmu: Add IBPB indirect jump asm blob
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Currently the lower boundary of branch misses event is set to 0. Strictly speaking 0 shouldn't be a valid count since it can't tell us if branch misses event counter works correctly or even disabled. Whereas it's also possible and reasonable that branch misses event count is 0 especailly for such simple loop() program with advanced branch predictor.
To eliminate such ambiguity and make branch misses event verification more acccurately, an extra IBPB indirect jump asm blob is appended and IBPB command is leveraged to clear the branch target buffer and force to cause a branch miss for the indirect jump.
--- x86/pmu.c | 70 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 14 deletions(-)
x86/pmu.c +56 -14
@@ -19,24 +19,52 @@#define EXPECTED_INSTR 17#define EXPECTED_BRNCH 5 -/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL + clflush/mfence instructions */ -#define EXTRA_INSNS (3 + 3 +2) +#define IBPB_JMP_INSNS 9 +#define IBPB_JMP_BRANCHES 2 + +#if defined(__i386__) || defined(_M_IX86)/* i386 */ +#define IBPB_JMP_ASM (_wrmsr) \ + "mov $1, %%eax; xor %%edx, %%edx;\n\t" \ + "mov $73, %%ecx;\n\t" \ + _wrmsr "\n\t" \ + "call 1f\n\t" \ + "1: pop %%eax\n\t" \ + "add $(2f-1b), %%eax\n\t" \ + "jmp *%%eax;\n\t" \ + "nop;\n\t" \ + "2: nop;\n\t" +#else /* x86_64 */ +#define IBPB_JMP_ASM (_wrmsr) \ + "mov $1, %%eax; xor %%edx, %%edx;\n\t" \ + "mov $73, %%ecx;\n\t" \ + _wrmsr "\n\t" \ + "call 1f\n\t" \ + "1: pop %%rax\n\t" \ + "add $(2f-1b), %%rax\n\t" \ + "jmp *%%rax;\n\t" \ + "nop;\n\t" \ + "2: nop;\n\t" +#endif + +/* GLOBAL_CTRL enable + disable + clflush/mfence + IBPB_JMP */ +#define EXTRA_INSNS (3 + 3 + 2 + IBPB_JMP_INSNS)#define LOOP_INSNS (N * 10 + EXTRA_INSNS) -#define LOOP_BRANCHES (N) -#define LOOP_ASM (_wrmsr, _clflush) \ - _wrmsr "\n\t" \ +#define LOOP_BRANCHES (N + IBPB_JMP_BRANCHES) +#define LOOP_ASM (_wrmsr1, _clflush, _wrmsr2) \ + _wrmsr1 "\n\t" \ "mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t" \ _clflush "\n\t" \ "mfence;\n\t" \ "1: mov (%1), %2; add $64, %1;\n\t" \ "nop; nop; nop; nop; nop; nop; nop;\n\t" \ "loop 1b;\n\t" \ + IBPB_JMP_ASM(_wrmsr2) \ "mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t" \ - _wrmsr "\n\t" + _wrmsr1 "\n\t" -#define _loop_asm (_wrmsr, _clflush) \ +#define _loop_asm (_wrmsr1, _clflush, _wrmsr2) \ do { \ - asm volatile(LOOP_ASM(_wrmsr, _clflush) \ + asm volatile(LOOP_ASM(_wrmsr1, _clflush, _wrmsr2) \ : "=b"(tmp), "=r"(tmp2), "=r"(tmp3) \ : "a"(eax), "d"(edx), "c"(global_ctl), \ "0"(N), "1"(buf) \
@@ -100,6 +128,12 @@ static struct pmu_event *gp_events;static unsigned int gp_events_size;static unsigned int fixed_counters_num; +static int has_ibpb (void ) +{ +return this_cpu_has (X86_FEATURE_SPEC_CTRL ) || +this_cpu_has (X86_FEATURE_AMD_IBPB ); +} +static inline void __loop (void ) {unsigned long tmp, tmp2, tmp3;
@@ -107,10 +141,14 @@ static inline void __loop(void)u32 eax =0 ;u32 edx =0 ; -if (this_cpu_has (X86_FEATURE_CLFLUSH )) -_loop_asm ("nop" ,"clflush (%1)" ); +if (this_cpu_has (X86_FEATURE_CLFLUSH ) &&has_ibpb ()) +_loop_asm ("nop" ,"clflush (%1)" ,"wrmsr" ); +else if (this_cpu_has (X86_FEATURE_CLFLUSH )) +_loop_asm ("nop" ,"clflush (%1)" ,"nop" ); +else if (has_ibpb ()) +_loop_asm ("nop" ,"nop" ,"wrmsr" );else -_loop_asm ("nop" ,"nop" ); +_loop_asm ("nop" ,"nop" ,"nop" ); }/*
@@ -127,10 +165,14 @@ static inline void __precise_loop(u64 cntrs)u32 eax = cntrs & (BIT_ULL (32 ) -1 );u32 edx = cntrs >>32 ; -if (this_cpu_has (X86_FEATURE_CLFLUSH )) -_loop_asm ("wrmsr" ,"clflush (%1)" ); +if (this_cpu_has (X86_FEATURE_CLFLUSH ) &&has_ibpb ()) +_loop_asm ("wrmsr" ,"clflush (%1)" ,"wrmsr" ); +else if (this_cpu_has (X86_FEATURE_CLFLUSH )) +_loop_asm ("wrmsr" ,"clflush (%1)" ,"nop" ); +else if (has_ibpb ()) +_loop_asm ("wrmsr" ,"nop" ,"wrmsr" );else -_loop_asm ("wrmsr" ,"nop" ); +_loop_asm ("wrmsr" ,"nop" ,"nop" ); }static inline void loop (u64 cntrs)
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 17/18 x86: pmu: Adjust lower boundary of branch-misses event
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
Since the IBPB command is added to force to trigger a branch miss at least, the lower boundary of branch misses event is increased to 1 by default. For these CPUs without IBPB support, adjust dynamically the lower boundary to 0 to avoid false positive.
--- x86/pmu.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
x86/pmu.c +19 -4
@@ -90,12 +90,12 @@ struct pmu_event { {"llc references", 0x4f2e, 1, 2*N}, {"llc misses", 0x412e, 1, 1*N}, {"branches", 0x00c4, 1*N, 1.1*N}, - {"branch misses", 0x00c5, 0, 0.1*N}, + {"branch misses", 0x00c5, 1, 0.1*N}, }, amd_gp_events[] = { {"core cycles", 0x0076, 1*N, 50*N}, {"instructions", 0x00c0, 10*N, 10.2*N}, {"branches", 0x00c2, 1*N, 1.1*N}, - {"branch misses", 0x00c3, 0, 0.1*N}, + {"branch misses", 0x00c3, 1, 0.1*N}, }, fixed_events[] = { {"fixed 0", MSR_CORE_PERF_FIXED_CTR0, 10*N, 10.2*N}, {"fixed 1", MSR_CORE_PERF_FIXED_CTR0 + 1, 1*N, 30*N},
@@ -111,6 +111,7 @@ enum {INTEL_REF_CYCLES_IDX =2 ,INTEL_LLC_MISSES_IDX =4 ,INTEL_BRANCHES_IDX =5 , + INTEL_BRANCH_MISS_IDX = 6, };/*
@@ -120,6 +121,7 @@ enum {enum {AMD_INSTRUCTIONS_IDX =1 ,AMD_BRANCHES_IDX =2 , +AMD_BRANCH_MISS_IDX =3 , };char *buf;
@@ -184,7 +186,8 @@ static inline void loop(u64 cntrs) }static void adjust_events_range (struct pmu_event *gp_events, -int instruction_idx,int branch_idx) +int instruction_idx,int branch_idx, +int branch_miss_idx) {/* * If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are
@@ -202,6 +205,15 @@ static void adjust_events_range(struct pmu_event *gp_events, gp_events[branch_idx].min =LOOP_BRANCHES ; gp_events[branch_idx].max =LOOP_BRANCHES ; } + +/* +* For CPUs without IBPB support, no way to force to trigger a branch +* miss and the measured branch misses is possible to be 0. Thus +* overwrite the lower boundary of branch misses event to 0 to avoid +* false positive. +*/ +if (!has_ibpb ()) + gp_events[branch_miss_idx].min =0 ; }volatile uint64_t irq_received;
@@ -916,6 +928,7 @@ int main(int ac, char **av) {int instruction_idx;int branch_idx; +int branch_miss_idx;setup_vm ();handle_irq (PMI_VECTOR , cnt_overflow);
@@ -932,6 +945,7 @@ int main(int ac, char **av) gp_events_size =sizeof (intel_gp_events)/sizeof (intel_gp_events[0 ]); instruction_idx =INTEL_INSTRUCTIONS_IDX ; branch_idx =INTEL_BRANCHES_IDX ; + branch_miss_idx =INTEL_BRANCH_MISS_IDX ;/* * For legacy Intel CPUS without clflush/clflushopt support,
@@ -948,9 +962,10 @@ int main(int ac, char **av) gp_events = (struct pmu_event *)amd_gp_events; instruction_idx =AMD_INSTRUCTIONS_IDX ; branch_idx =AMD_BRANCHES_IDX ; + branch_miss_idx =AMD_BRANCH_MISS_IDX ;report_prefix_push ("AMD" ); } -adjust_events_range (gp_events, instruction_idx, branch_idx); +adjust_events_range (gp_events, instruction_idx, branch_idx, branch_miss_idx);printf ("PMU version: %d\n" , pmu.version);printf ("GP counters: %d\n" , pmu.nr_gp_counters);
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Sean Christopherson
reviewerPATCH v7 18/18 x86: pmu: Optimize emulated instruction validation
In reply to Sean ChristophersonFrom: Dapeng Mi <[email protected]>
For support CPUs supporting PERF_GLOBAL_CTRL MSR, the validation for emulated instruction can be improved to check against precise counts for instructions and branches events instead of a rough range.
Move enabling and disabling PERF_GLOBAL_CTRL MSR into kvm_fep_asm blob, thus instructions and branches events can be verified against precise counts.
--- x86/pmu.c | 108 ++++++++++++++++++++++++++++++++---------------------- 1 file changed, 65 insertions(+), 43 deletions(-)
x86/pmu.c +65 -43
@@ -14,11 +14,6 @@#define N 1000000 -// These values match the number of instructions and branches in the -// assembly block in check_emulated_instr(). -#define EXPECTED_INSTR 17 -#define EXPECTED_BRNCH 5 -#define IBPB_JMP_INSNS 9#define IBPB_JMP_BRANCHES 2
@@ -71,6 +66,40 @@ do { \ : "edi"); \ }while (0 ) +/* the number of instructions and branches of the kvm_fep_asm() blob */ +#define KVM_FEP_INSNS 22 +#define KVM_FEP_BRANCHES 5 + +/* +* KVM_FEP is a magic prefix that forces emulation so +* 'KVM_FEP "jne label\n"' just counts as a single instruction. +*/ +#define kvm_fep_asm (_wrmsr) \ +do { \ + asm volatile( \ + _wrmsr "\n\t" \ + "mov %%ecx, %%edi;\n\t" \ + "mov $0x0, %%eax;\n\t" \ + "cmp $0x0, %%eax;\n\t" \ + KVM_FEP "jne 1f\n\t" \ + KVM_FEP "jne 1f\n\t" \ + KVM_FEP "jne 1f\n\t" \ + KVM_FEP "jne 1f\n\t" \ + KVM_FEP "jne 1f\n\t" \ + "mov $0xa, %%eax; cpuid;\n\t" \ + "mov $0xa, %%eax; cpuid;\n\t" \ + "mov $0xa, %%eax; cpuid;\n\t" \ + "mov $0xa, %%eax; cpuid;\n\t" \ + "mov $0xa, %%eax; cpuid;\n\t" \ + "1: mov %%edi, %%ecx; \n\t" \ + "xor %%eax, %%eax; \n\t" \ + "xor %%edx, %%edx;\n\t" \ + _wrmsr "\n\t" \ + : \ + : "a"(eax), "d"(edx), "c"(ecx) \ + : "ebx", "edi"); \ +} while (0) + typedef struct { uint32_t ctr; uint32_t idx;
@@ -668,6 +697,7 @@ static void check_running_counter_wrmsr(void)static void check_emulated_instr (void ) { +u32 eax, edx, ecx;uint64_t status, instr_start, brnch_start;uint64_t gp_counter_width = (1ull << pmu.gp_counter_width) -1 ; unsigned int branch_idx = pmu.is_intel ?
@@ -675,6 +705,7 @@ static void check_emulated_instr(void)unsigned int instruction_idx = pmu.is_intel ?INTEL_INSTRUCTIONS_IDX :AMD_INSTRUCTIONS_IDX ; +pmu_counter_t brnch_cnt = { .ctr =MSR_GP_COUNTERx (0 ),/* branch instructions */
@@ -690,55 +721,46 @@ static void check_emulated_instr(void)if (this_cpu_has_perf_global_status ())pmu_clear_global_status (); -start_event (&brnch_cnt); -start_event (&instr_cnt); +__start_event (&brnch_cnt,0 ); +__start_event (&instr_cnt,0 ); - brnch_start = -EXPECTED_BRNCH ; - instr_start = -EXPECTED_INSTR ; + brnch_start = -KVM_FEP_BRANCHES ; + instr_start = -KVM_FEP_INSNS ;wrmsr (MSR_GP_COUNTERx (0 ), brnch_start & gp_counter_width);wrmsr (MSR_GP_COUNTERx (1 ), instr_start & gp_counter_width); -// KVM_FEP is a magic prefix that forces emulation so -// 'KVM_FEP "jne label\n"' just counts as a single instruction. - asmvolatile ( -"mov $0x0, %%eax\n" -"cmp $0x0, %%eax\n" -KVM_FEP "jne label\n" -KVM_FEP "jne label\n" -KVM_FEP "jne label\n" -KVM_FEP "jne label\n" -KVM_FEP "jne label\n" -"mov $0xa, %%eax\n" -"cpuid\n" -"mov $0xa, %%eax\n" -"cpuid\n" -"mov $0xa, %%eax\n" -"cpuid\n" -"mov $0xa, %%eax\n" -"cpuid\n" -"mov $0xa, %%eax\n" -"cpuid\n" -"label:\n" - : - : - :"eax" ,"ebx" ,"ecx" ,"edx" ); -if (this_cpu_has_perf_global_ctrl ()) -wrmsr (pmu.msr_global_ctl,0 ); +if (this_cpu_has_perf_global_ctrl ()) { + eax =BIT (0 ) |BIT (1 ); + ecx = pmu.msr_global_ctl; + edx =0 ; +kvm_fep_asm ("wrmsr" ); + }else { + eax = ecx = edx =0 ; +kvm_fep_asm ("nop" ); + } -stop_event (&brnch_cnt); -stop_event (&instr_cnt); +__stop_event (&brnch_cnt); +__stop_event (&instr_cnt);// Check that the end count - start count is at least the expected // number of instructions and branches. -report (instr_cnt.count - instr_start >=EXPECTED_INSTR , -"instruction count" ); -report (brnch_cnt.count - brnch_start >=EXPECTED_BRNCH , -"branch count" ); +if (this_cpu_has_perf_global_ctrl ()) { +report (instr_cnt.count - instr_start ==KVM_FEP_INSNS , +"instruction count" ); +report (brnch_cnt.count - brnch_start ==KVM_FEP_BRANCHES , +"branch count" ); + }else { +report (instr_cnt.count - instr_start >=KVM_FEP_INSNS , +"instruction count" ); +report (brnch_cnt.count - brnch_start >=KVM_FEP_BRANCHES , +"branch count" ); + } +if (this_cpu_has_perf_global_status ()) {// Additionally check that those counters overflowed properly. status =rdmsr (pmu.msr_global_status); -report (status &1 ,"branch counter overflow" ); -report (status &2 ,"instruction counter overflow" ); +report (status &BIT_ULL (0 ),"branch counter overflow" ); +report (status &BIT_ULL (1 ),"instruction counter overflow" ); }report_prefix_pop ();
Signature · 1 line
2.48.1.601.g30ceb7b040-goog
Test this patch series on Sapphire Rapids and Granite Rapids against perf-based vPMU and mediated vPMU. No failure is found. Thanks.
Quoted 42 lines · Sean Christopherson
v7 of Dapeng's PMU fixes/cleanups series. FWIW, I haven't gone through the changes all that carefully, I mostly focused on the high level "what" and the style.
This blows up without the per-CPU fixes:
https://lore.kernel.org/all/[email protected]v7:
- Rewrite the changelog for the patch that shrinks the size ofpmu_counter_t.
- Cosmetic changes.v6: https://lore.kernel.org/all/[email protected]
Dapeng Mi (17):
x86: pmu: Remove blank line and redundant space
x86: pmu: Refine fixed_events[] names
x86: pmu: Align fields inpmu_counter_tto better pack the struct
x86: pmu: Enlarge cnt[] length to 48 incheck_counters_many()
x86: pmu: Print measured event count if test fails
x86: pmu: Fix potential out of bound access for fixed events
x86: pmu: Fix cycles event validation failure
x86: pmu: Use macro to replace hard-coded branches event index
x86: pmu: Use macro to replace hard-coded ref-cycles event index
x86: pmu: Use macro to replace hard-coded instructions event index
x86: pmu: Enable and disable PMCs inloop()asm blob
x86: pmu: Improve instruction and branches events verification
x86: pmu: Improve LLC misses event verification
x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy
CPUs
x86: pmu: Add IBPB indirect jump asm blob
x86: pmu: Adjust lower boundary of branch-misses event
x86: pmu: Optimize emulated instruction validationXiong Zhang (1):
x86: pmu: Remove duplicate code inpmu_init()lib/x86/pmu.c | 5 - x86/pmu.c | 423 ++++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 342 insertions(+), 86 deletions(-)base-commit:
f77fb696cfd0e4a5562cdca189be557946bf522f
Quoted 8 lines · Sean Christopherson
v7 of Dapeng's PMU fixes/cleanups series. FWIW, I haven't gone through the changes all that carefully, I mostly focused on the high level "what" and the style.
This blows up without the per-CPU fixes:
https://lore.kernel.org/all/[email protected][...]
Applied to kvm-x86 next (and now pulled by Paolo), thanks!
[01/18] x86: pmu: Remove duplicate code in pmu_init()
https://github.com/kvm-x86/kvm-unit-tests/commit/8d1acfe47c0c [02/18] x86: pmu: Remove blank line and redundant space https://github.com/kvm-x86/kvm-unit-tests/commit/59d0ff80700d [03/18] x86: pmu: Refine fixed_events[] names https://github.com/kvm-x86/kvm-unit-tests/commit/5d6a3a547c3c [04/18] x86: pmu: Align fields in pmu_counter_t to better pack the struct https://github.com/kvm-x86/kvm-unit-tests/commit/9720e46c0a7a [05/18] x86: pmu: Enlarge cnt[] length to 48 in check_counters_many() https://github.com/kvm-x86/kvm-unit-tests/commit/f21c809e50b1 [06/18] x86: pmu: Print measured event count if test fails https://github.com/kvm-x86/kvm-unit-tests/commit/d24d33813f10 [07/18] x86: pmu: Fix potential out of bound access for fixed events https://github.com/kvm-x86/kvm-unit-tests/commit/9c07c92b2d89 [08/18] x86: pmu: Fix cycles event validation failure https://github.com/kvm-x86/kvm-unit-tests/commit/f2a56148889b [09/18] x86: pmu: Use macro to replace hard-coded branches event index https://github.com/kvm-x86/kvm-unit-tests/commit/f4e97f59869b [10/18] x86: pmu: Use macro to replace hard-coded ref-cycles event index https://github.com/kvm-x86/kvm-unit-tests/commit/25cc1ea7a8fd [11/18] x86: pmu: Use macro to replace hard-coded instructions event index https://github.com/kvm-x86/kvm-unit-tests/commit/85c755786de4 [12/18] x86: pmu: Enable and disable PMCs in loop() asm blob https://github.com/kvm-x86/kvm-unit-tests/commit/50f8e27e95e5 [13/18] x86: pmu: Improve instruction and branches events verification https://github.com/kvm-x86/kvm-unit-tests/commit/89126fa47d19 [14/18] x86: pmu: Improve LLC misses event verification https://github.com/kvm-x86/kvm-unit-tests/commit/38b5b42631c2 [15/18] x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy CPUs https://github.com/kvm-x86/kvm-unit-tests/commit/e0d0022fbd4c [16/18] x86: pmu: Add IBPB indirect jump asm blob https://github.com/kvm-x86/kvm-unit-tests/commit/8dbfe326bec8 [17/18] x86: pmu: Adjust lower boundary of branch-misses event https://github.com/kvm-x86/kvm-unit-tests/commit/28437cdbec8b [18/18] x86: pmu: Optimize emulated instruction validation https://github.com/kvm-x86/kvm-unit-tests/commit/5dcbe0dd0c33