(pata-2.6 fix queue) piix/slc90e66: more tuneproc() fixing
PATCH 1/1 (pata-2.6 fix queue) piix/slc90e66: more tuneproc() fixing
The tuneproc() method in both these drivers failed to set the drive's own speed. Fix this by renaming the function and "wrapping around it" the new tuneproc() method. While at it, convert the rest of the PIO setup code into proper C. :-)
Warning: this has only been compile tested (but we are in the merge window already anyway :-).
drivers/ide/pci/piix.c | 45 +++++++++++++++++++++++++++++---------------- drivers/ide/pci/slc90e66.c | 35 +++++++++++++++++++---------------- 2 files changed, 48 insertions(+), 32 deletions(-)
drivers/ide/pci/piix.c +29 -16
@@ -1,10 +1,10 @@/* -* linux/drivers/ide/pci/piix.c Version 0.46 December 3, 2006 +* linux/drivers/ide/pci/piix.c Version 0.47 February 5, 2007 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <[email protected]> * Copyright (C) 2003 Red Hat Inc <[email protected]> -* Copyright (C) 2006 MontaVista Software, Inc. <[email protected]> +* Copyright (C) 2006-2007 MontaVista Software, Inc. <[email protected]> * * May be copied or modified under the terms of the GNU General Public License *
@@ -205,14 +205,13 @@ static u8 piix_dma_2_pio (u8 xfer_rate) }/** -* piix_tune_drive - tune a drive attached to a PIIX +* piix_tune_pio - tune PIIX for PIO mode * @drive: drive to tune * @pio: desired PIO mode * -* Set the interface PIO mode based upon the settings done by AMI BIOS -* (might be useful if drive is not registered in CMOS for any reason). +* Set the interface PIO mode based upon the settings done by AMI BIOS. */ -static void piix_tune_drive (ide_drive_t *drive,u8 pio) +static void piix_tune_pio (ide_drive_t *drive,u8 pio) {ide_hwif_t *hwif =HWIF (drive);struct pci_dev *dev = hwif->pci_dev;
@@ -233,8 +232,6 @@ static void piix_tune_drive (ide_drive_t { 2, 1 }, { 2, 3 }, }; - pio =ide_get_best_pio_mode (drive, pio,4 ,NULL ); -/* * Master vs slave is synchronized above us but the slave register is * shared by the two hwifs so the corner case of two slave timeouts in
@@ -253,19 +250,20 @@ static void piix_tune_drive (ide_drive_t master_data |=0x4000 ; master_data &= ~0x0070 ;if (pio >1 ) { -/* enable PPE, IE and TIME */ - master_data = master_data | (control <<4 ); +/* Set PPE, IE and TIME */ + master_data |= control <<4 ; }pci_read_config_byte (dev, slave_port, &slave_data); - slave_data = slave_data & (hwif->channel ?0x0f :0xf0 ); - slave_data = slave_data | (((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << (hwif->channel ?4 :0 )); + slave_data &= hwif->channel ?0x0f :0xf0 ; + slave_data |= ((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << + (hwif->channel ?4 :0 ); }else { master_data &= ~0x3307 ;if (pio >1 ) {/* enable PPE, IE and TIME */ - master_data = master_data | control; + master_data |= control; } - master_data = master_data | (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); + master_data |= (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); }pci_write_config_word (dev, master_port, master_data);if (is_slave)
@@ -274,6 +272,21 @@ static void piix_tune_drive (ide_drive_t }/** +* piix_tune_drive - tune a drive attached to PIIX +* @drive: drive to tune +* @pio: desired PIO mode +* +* Set the drive's PIO mode (might be useful if drive is not registered +* in CMOS for any reason). +*/ +static void piix_tune_drive (ide_drive_t *drive,u8 pio) +{ + pio =ide_get_best_pio_mode (drive, pio,4 ,NULL ); +piix_tune_pio (drive, pio); + (void )ide_config_drive_speed (drive,XFER_PIO_0 + pio); +} + +/** * piix_tune_chipset - tune a PIIX interface * @drive: IDE drive to tune * @xferspeed: speed to configure
@@ -348,8 +361,8 @@ static int piix_tune_chipset (ide_drive_pci_write_config_byte (dev,0x55 , (u8 ) reg55 & ~w_flag); } -piix_tune_drive (drive,piix_dma_2_pio (speed)); -return (ide_config_drive_speed (drive, speed)); +piix_tune_pio (drive,piix_dma_2_pio (speed)); +return ide_config_drive_speed (drive, speed); }/**
drivers/ide/pci/slc90e66.c +19 -16
@@ -1,8 +1,8 @@/* -* linux/drivers/ide/pci/slc90e66.c Version 0.13 December 30, 2006 +* linux/drivers/ide/pci/slc90e66.c Version 0.14 February 5, 2007 * * Copyright (C) 2000-2002 Andre Hedrick <[email protected]> -* Copyright (C) 2006 MontaVista Software, Inc. <[email protected]> +* Copyright (C) 2006-2007 MontaVista Software, Inc. <[email protected]> * * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, * but this keeps the ISA-Bridge and slots alive.
@@ -57,11 +57,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_ra } } -/* -* Based on settings done by AMI BIOS -* (might be useful if drive is not registered in CMOS for any reason). -*/ -static void slc90e66_tune_drive (ide_drive_t *drive,u8 pio) +static void slc90e66_tune_pio (ide_drive_t *drive,u8 pio) {ide_hwif_t *hwif =HWIF (drive);struct pci_dev *dev = hwif->pci_dev;
@@ -80,7 +76,6 @@ static void slc90e66_tune_drive (ide_dri { 2, 1 }, { 2, 3 }, }; - pio =ide_get_best_pio_mode (drive, pio,4 ,NULL );spin_lock_irqsave (&ide_lock, flags);pci_read_config_word (dev, master_port, &master_data);
@@ -94,19 +89,20 @@ static void slc90e66_tune_drive (ide_dri master_data |=0x4000 ; master_data &= ~0x0070 ;if (pio >1 ) { -/* enable PPE, IE and TIME */ - master_data = master_data | (control <<4 ); +/* Set PPE, IE and TIME */ + master_data |= control <<4 ; }pci_read_config_byte (dev, slave_port, &slave_data); - slave_data = slave_data & (hwif->channel ?0x0f :0xf0 ); - slave_data = slave_data | (((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << (hwif->channel ?4 :0 )); + slave_data &= hwif->channel ?0x0f :0xf0 ; + slave_data |= ((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << + (hwif->channel ?4 :0 ); }else { master_data &= ~0x3307 ;if (pio >1 ) {/* enable PPE, IE and TIME */ - master_data = master_data | control; + master_data |= control; } - master_data = master_data | (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); + master_data |= (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); }pci_write_config_word (dev, master_port, master_data);if (is_slave)
@@ -114,6 +110,13 @@ static void slc90e66_tune_drive (ide_drispin_unlock_irqrestore (&ide_lock, flags); } +static void slc90e66_tune_drive (ide_drive_t *drive,u8 pio) +{ + pio =ide_get_best_pio_mode (drive, pio,4 ,NULL ); +slc90e66_tune_pio (drive, pio); + (void )ide_config_drive_speed (drive,XFER_PIO_0 + pio); +} +static int slc90e66_tune_chipset (ide_drive_t *drive,u8 xferspeed) {ide_hwif_t *hwif =HWIF (drive);
@@ -162,8 +165,8 @@ static int slc90e66_tune_chipset (ide_drpci_write_config_word (dev,0x4a , reg4a & ~a_speed); } -slc90e66_tune_drive (drive,slc90e66_dma_2_pio (speed)); -return (ide_config_drive_speed (drive, speed)); +slc90e66_tune_pio (drive,slc90e66_dma_2_pio (speed)); +return ide_config_drive_speed (drive, speed); }static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
Bartlomiej Zolnierkiewicz
AppliedQuoted 6 lines · Sergei Shtylyov
The
tuneproc()method in both these drivers failed to set the drive's own speed. Fix this by renaming the function and "wrapping around it" the newtuneproc()method. While at it, convert the rest of the PIO setup code into proper C. :-)Warning: this has only been compile tested (but we are in the merge window already anyway :-).
I tested it quickly on ICH4.
Quoted 1 line
Signed-off-by Sergei Shtylyov <[email protected]>
applied
Hello.
Quoted 4 lines · Bartlomiej Zolnierkiewicz
Quoted 3 lines
The
tuneproc()method in both these drivers failed to set the drive's own speed. Fix this by renaming the function and "wrapping around it" the newtuneproc()method. While at it, convert the rest of the PIO setup code into proper C. :-)
Quoted 8 lines
Quoted 2 lines
Warning: this has only been compile tested (but we are in the merge window already anyway :-).
I tested it quickly on ICH4.
Quoted 1 line
Signed-off-by Sergei Shtylyov <[email protected]>applied
Could you replace it with updated version I'm going to send today?
I've overlooked one change...
MBR, Sergei
PATCH 1/1 (pata-2.6 fix queue) piix/slc90e66: more tuneproc() fixing (take 2)
In reply to Sergei ShtylyovThe tuneproc() method in both these drivers failed to set the drive's own speed. Fix this by renaming the function and "wrapping around it" the new tuneproc() method. Switch back to calling tuneproc() in the PIO fallback code. While at it, also convert the rest of the PIO timing code into proper C. :-)
Has been kind of tested on SLC90E66. I'm too lazy to reboot my box and test on ICH4... :-)
drivers/ide/pci/piix.c +30 -18
@@ -1,10 +1,10 @@/* -* linux/drivers/ide/pci/piix.c Version 0.46 December 3, 2006 +* linux/drivers/ide/pci/piix.c Version 0.47 February 8, 2007 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <[email protected]> * Copyright (C) 2003 Red Hat Inc <[email protected]> -* Copyright (C) 2006 MontaVista Software, Inc. <[email protected]> +* Copyright (C) 2006-2007 MontaVista Software, Inc. <[email protected]> * * May be copied or modified under the terms of the GNU General Public License *
@@ -205,14 +205,13 @@ static u8 piix_dma_2_pio (u8 xfer_rate) }/** -* piix_tune_drive - tune a drive attached to a PIIX +* piix_tune_pio - tune PIIX for PIO mode * @drive: drive to tune * @pio: desired PIO mode * -* Set the interface PIO mode based upon the settings done by AMI BIOS -* (might be useful if drive is not registered in CMOS for any reason). +* Set the interface PIO mode based upon the settings done by AMI BIOS. */ -static void piix_tune_drive (ide_drive_t *drive,u8 pio) +static void piix_tune_pio (ide_drive_t *drive,u8 pio) {ide_hwif_t *hwif =HWIF (drive);struct pci_dev *dev = hwif->pci_dev;
@@ -233,8 +232,6 @@ static void piix_tune_drive (ide_drive_t { 2, 1 }, { 2, 3 }, }; - pio =ide_get_best_pio_mode (drive, pio,4 ,NULL ); -/* * Master vs slave is synchronized above us but the slave register is * shared by the two hwifs so the corner case of two slave timeouts in
@@ -253,19 +250,20 @@ static void piix_tune_drive (ide_drive_t master_data |=0x4000 ; master_data &= ~0x0070 ;if (pio >1 ) { -/* enable PPE, IE and TIME */ - master_data = master_data | (control <<4 ); +/* Set PPE, IE and TIME */ + master_data |= control <<4 ; }pci_read_config_byte (dev, slave_port, &slave_data); - slave_data = slave_data & (hwif->channel ?0x0f :0xf0 ); - slave_data = slave_data | (((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << (hwif->channel ?4 :0 )); + slave_data &= hwif->channel ?0x0f :0xf0 ; + slave_data |= ((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << + (hwif->channel ?4 :0 ); }else { master_data &= ~0x3307 ;if (pio >1 ) {/* enable PPE, IE and TIME */ - master_data = master_data | control; + master_data |= control; } - master_data = master_data | (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); + master_data |= (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); }pci_write_config_word (dev, master_port, master_data);if (is_slave)
@@ -274,6 +272,21 @@ static void piix_tune_drive (ide_drive_t }/** +* piix_tune_drive - tune a drive attached to PIIX +* @drive: drive to tune +* @pio: desired PIO mode +* +* Set the drive's PIO mode (might be useful if drive is not registered +* in CMOS for any reason). +*/ +static void piix_tune_drive (ide_drive_t *drive,u8 pio) +{ + pio =ide_get_best_pio_mode (drive, pio,4 ,NULL ); +piix_tune_pio (drive, pio); + (void )ide_config_drive_speed (drive,XFER_PIO_0 + pio); +} + +/** * piix_tune_chipset - tune a PIIX interface * @drive: IDE drive to tune * @xferspeed: speed to configure
@@ -348,8 +361,8 @@ static int piix_tune_chipset (ide_drive_pci_write_config_byte (dev,0x55 , (u8 ) reg55 & ~w_flag); } -piix_tune_drive (drive,piix_dma_2_pio (speed)); -return (ide_config_drive_speed (drive, speed)); +piix_tune_pio (drive,piix_dma_2_pio (speed)); +return ide_config_drive_speed (drive, speed); }/**
@@ -401,8 +414,7 @@ static int piix_config_drive_xfer_rate ( }else if ((id->capability &8 ) || (id->field_valid &2 )) { fast_ata_pio:/* Find best PIO mode. */ - (void ) hwif->speedproc (drive,XFER_PIO_0 + -ide_get_best_pio_mode (drive,255 ,4 ,NULL )); + hwif->tuneproc (drive,255 );return hwif->ide_dma_off_quietly (drive); }/* IORDY not supported */
drivers/ide/pci/slc90e66.c +20 -18
@@ -1,8 +1,8 @@/* -* linux/drivers/ide/pci/slc90e66.c Version 0.13 December 30, 2006 +* linux/drivers/ide/pci/slc90e66.c Version 0.14 February 8, 2007 * * Copyright (C) 2000-2002 Andre Hedrick <[email protected]> -* Copyright (C) 2006 MontaVista Software, Inc. <[email protected]> +* Copyright (C) 2006-2007 MontaVista Software, Inc. <[email protected]> * * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, * but this keeps the ISA-Bridge and slots alive.
@@ -57,11 +57,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_ra } } -/* -* Based on settings done by AMI BIOS -* (might be useful if drive is not registered in CMOS for any reason). -*/ -static void slc90e66_tune_drive (ide_drive_t *drive,u8 pio) +static void slc90e66_tune_pio (ide_drive_t *drive,u8 pio) {ide_hwif_t *hwif =HWIF (drive);struct pci_dev *dev = hwif->pci_dev;
@@ -80,7 +76,6 @@ static void slc90e66_tune_drive (ide_dri { 2, 1 }, { 2, 3 }, }; - pio =ide_get_best_pio_mode (drive, pio,4 ,NULL );spin_lock_irqsave (&ide_lock, flags);pci_read_config_word (dev, master_port, &master_data);
@@ -94,19 +89,20 @@ static void slc90e66_tune_drive (ide_dri master_data |=0x4000 ; master_data &= ~0x0070 ;if (pio >1 ) { -/* enable PPE, IE and TIME */ - master_data = master_data | (control <<4 ); +/* Set PPE, IE and TIME */ + master_data |= control <<4 ; }pci_read_config_byte (dev, slave_port, &slave_data); - slave_data = slave_data & (hwif->channel ?0x0f :0xf0 ); - slave_data = slave_data | (((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << (hwif->channel ?4 :0 )); + slave_data &= hwif->channel ?0x0f :0xf0 ; + slave_data |= ((timings[pio][0 ] <<2 ) | timings[pio][1 ]) << + (hwif->channel ?4 :0 ); }else { master_data &= ~0x3307 ;if (pio >1 ) {/* enable PPE, IE and TIME */ - master_data = master_data | control; + master_data |= control; } - master_data = master_data | (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); + master_data |= (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); }pci_write_config_word (dev, master_port, master_data);if (is_slave)
@@ -114,6 +110,13 @@ static void slc90e66_tune_drive (ide_drispin_unlock_irqrestore (&ide_lock, flags); } +static void slc90e66_tune_drive (ide_drive_t *drive,u8 pio) +{ + pio =ide_get_best_pio_mode (drive, pio,4 ,NULL ); +slc90e66_tune_pio (drive, pio); + (void )ide_config_drive_speed (drive,XFER_PIO_0 + pio); +} +static int slc90e66_tune_chipset (ide_drive_t *drive,u8 xferspeed) {ide_hwif_t *hwif =HWIF (drive);
@@ -162,8 +165,8 @@ static int slc90e66_tune_chipset (ide_drpci_write_config_word (dev,0x4a , reg4a & ~a_speed); } -slc90e66_tune_drive (drive,slc90e66_dma_2_pio (speed)); -return (ide_config_drive_speed (drive, speed)); +slc90e66_tune_pio (drive,slc90e66_dma_2_pio (speed)); +return ide_config_drive_speed (drive, speed); }static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
@@ -193,8 +196,7 @@ static int slc90e66_config_drive_xfer_ra }else if ((id->capability &8 ) || (id->field_valid &2 )) { fast_ata_pio: - (void ) hwif->speedproc (drive,XFER_PIO_0 + -ide_get_best_pio_mode (drive,255 ,4 ,NULL )); + hwif->tuneproc (drive,255 );return hwif->ide_dma_off_quietly (drive); }/* IORDY not supported */
Re: [PATCH] (pata-2.6 fix queue) piix/slc90e66: more tuneproc() fixing (take 2)
Quoted 10 lines · Sergei Shtylyov
The
tuneproc()method in both these drivers failed to set the drive's own speed. Fix this by renaming the function and "wrapping around it" the newtuneproc()method. Switch back to callingtuneproc()in the PIO fallback code. While at it, also convert the rest of the PIO timing code into proper C. :-)Has been kind of tested on SLC90E66. I'm too lazy to reboot my box and test on ICH4... :-)
Signed-off-by Sergei Shtylyov <[email protected]>Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
thanks, I replaced the old version with this one