Skip to contentSkip to conversation

package/gcc: Enable gcc-8.x support for BR2_powerpc_spe

PATCH New Michael Durrant 5 participants 5 messages Oct 26, 2020 – Nov 3, 2020 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 package/gcc: Enable gcc-8.x support for BR2_powerpc_spe

The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC.? After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.

The GCC-8.x compiler series continues to support powerpc_spe CPU cores, but only as an --enable-obsoleted instruction set. This patch enables the use of GCC-8.x and asserts the required option to enable the powerpc_spe instruction set.

This Patch passes compilation and run tests with the arcturus/ppc-ucp1020? board.

This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732

---
?package/gcc/Config.in.host | 2 +-
?package/gcc/gcc.mk???????? | 1 +
?2 files changed, 2 insertions(+), 1 deletion(-)

package/gcc/Config.in.host +0 -0
index 74999c800b..8ae778437b 100644
@@ -27,7 +27,7 @@ config BR2_GCC_VERSION_8_X

??????? depends on !BR2_or1k
??????? # powerpc spe support has been deprecated since gcc 8.x. ??????? # https://gcc.gnu.org/ml/gcc/2018-04/msg00102.html
-?????? depends on !BR2_powerpc_SPE
+?????? # it can still be built with --enable-obsolete ??????? select BR2_TOOLCHAIN_GCC_AT_LEAST_8

?config BR2_GCC_VERSION_9_X

package/gcc/gcc.mk +0 -0
index f372857916..beac27ede4 100644
@@ -217,6 +217,7 @@ endif

?# Enable proper double/long double for SPE ABI
?ifeq ($(BR2_powerpc_SPE),y)
?HOST_GCC_COMMON_CONF_OPTS += \
+?????? --enable-obsolete \
??????? --enable-e500_double \
??????? --with-long-double-128
?endif

Signature · 1 line
2.26.2
#2 lore raw

PATCH 1/1 package/gcc: Enable gcc-8.x support for BR2_powerpc_spe

MIchael,

Quoted 11 lines · Michael Durrant

The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC. After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.

The GCC-8.x compiler series continues to support powerpc_spe CPU cores, but only as an --enable-obsoleted instruction set. This patch enables the use of GCC-8.x and asserts the required option to enable the powerpc_spe instruction set.

Hopefully things get revived and support moves back out of obsoleted....

https://lists.freebsd.org/pipermail/freebsd-ppc/2018-May/009465.html

Quoted 11 lines

This Patch passes compilation and run tests with the arcturus/ppc-ucp1020 board.

This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732

#3 lore raw

PATCH 1/1 package/gcc: Enable gcc-8.x support for BR2_powerpc_spe

Hi Matthew,

Unfortunately, in the latest release of GCC 8.4 [2020-03-04], powerpc_spe could only be built with the --enable-obsolete option, and support for powerpc_spe has been removed from GCC 9.

Oleks

Quoted 38 lines · Matthew Weber

MIchael,

Quoted 10 lines · Michael Durrant

The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC. After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.

The GCC-8.x compiler series continues to support powerpc_spe CPU cores, but only as an --enable-obsoleted instruction set. This patch enables the use of GCC-8.x and asserts the required option to enable the powerpc_spe instruction set.

Hopefully things get revived and support moves back out of obsoleted....

https://lists.freebsd.org/pipermail/freebsd-ppc/2018-May/009465.html

Quoted 11 lines

This Patch passes compilation and run tests with the arcturus/ppc-ucp1020 board.

This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#4 lore raw

PATCH 1/1 package/gcc: Enable gcc-8.x support for BR2_powerpc_spe

In reply to Michael Durrant
Quoted 18 lines · On Mon, 26 Oct 2020 15:17:35 -0400 Michael Durrant…

The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC.? After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.

The GCC-8.x compiler series continues to support powerpc_spe CPU cores, but only as an --enable-obsoleted instruction set. This patch enables the use of GCC-8.x and asserts the required option to enable the powerpc_spe instruction set.

This Patch passes compilation and run tests with the arcturus/ppc-ucp1020? board.

This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732

Quoted 7 lines

---
?package/gcc/Config.in.host | 2 +-
?package/gcc/gcc.mk???????? | 1 +
?2 files changed, 2 insertions(+), 1 deletion(-)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#5 lore raw

PATCH 1/1 package/gcc: Enable gcc-8.x support for BR2_powerpc_spe

Hello,

Le 31/10/2020 ? 23:49, Thomas Petazzoni a ?crit?:

Quoted 8 lines
Quoted 5 lines · On Mon, 26 Oct 2020 15:17:35 -0400 Michael Durrant…

The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC.? After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.

Quoted 4 lines
Quoted 4 lines

The GCC-8.x compiler series continues to support powerpc_spe CPU cores, but only as an --enable-obsoleted instruction set. This patch enables the use of GCC-8.x and asserts the required option to enable the powerpc_spe instruction set.

This is sad to see a CPU that is still used removed from upstream GCC. But what's the plan for next year ? GCC 8 is currently at 8.4.0 and the last release will be available in few month.
As soon as GCC 11.1 is added to Buildroot, GCC 8 will likely be removed to keep only 3 GCC version.
I don't see a future proof solution... maybe using a prebuilt toolchain for this defconfig?

Best regards,
Romain

Quoted 21 lines
Quoted 9 lines

This Patch passes compilation and run tests with the arcturus/ppc-ucp1020? board.

This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732

Quoted 7 lines

---
?package/gcc/Config.in.host | 2 +-
?package/gcc/gcc.mk???????? | 1 +
?2 files changed, 2 insertions(+), 1 deletion(-)

Applied to master, thanks.

Thomas