arm64: dts: hisilicon: Standardize Poplar GPIO line names

The hi6220-HiKey board started to name GPIO lines for 96boards, using just the plain names "GPIO-A" etc from the 96boards specification.

Poplar started to use an arbitrary "LS-GPIO-A" (etc) prefix that is not part of the 96boards specification.

As the former notation arrived first, and we need consistency among 96board, rectify the Poplar board to use this too. This is important for userspace that wants to look up GPIO names from these strings.

Cc Jiancheng Xue <[email protected]>

Cc Alex Elder <[email protected]>

Cc Peter Griffin <[email protected]>

Signed-off-by Linus Walleij <[email protected]>

---

 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +10 -10

index b9142871d6fe..a6fd13389f8d 100644
@@ -78,17 +78,17 @@
 
 &gpio1 {
 	status = "okay";
-	gpio-line-names = "LS-GPIO-E",	"",
+	gpio-line-names = "GPIO-E",	"",
 			  "",		"",
-			  "",		"LS-GPIO-F",
-			  "",		"LS-GPIO-J";
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
 };
 
 &gpio2 {
 	status = "okay";
-	gpio-line-names = "LS-GPIO-H",	"LS-GPIO-I",
-			  "LS-GPIO-L",	"LS-GPIO-G",
-			  "LS-GPIO-K",	"",
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
 			  "",		"";
 };
 

@@ -96,15 +96,15 @@
 	status = "okay";
 	gpio-line-names = "",		"",
 			  "",		"",
-			  "LS-GPIO-C",	"",
-			  "",		"LS-GPIO-B";
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
 };
 
 &gpio4 {
 	status = "okay";
 	gpio-line-names = "",		"",
 			  "",		"",
-			  "",		"LS-GPIO-D",
+			  "",		"GPIO-D",
 			  "",		"";
 };
 

@@ -112,7 +112,7 @@
 	status = "okay";
 	gpio-line-names = "",		"USER-LED-1",
 			  "USER-LED-2",	"",
-			  "",		"LS-GPIO-A",
+			  "",		"GPIO-A",
 			  "",		"";
 };