Add Hynix H27UBG8T2BTR id

Add Hynix H27UBG8T2BTR nand chip identification.
These chips are sometimes present in e.g. older A20-olinuxino-micro boards.

---
drivers/mtd/nand/raw/nand_ids.c | 4 ++++

1 file changed, 4 insertions(+)

b/drivers/mtd/nand/raw/nand_ids.c
index 4009d64..3104f87 100644

@@ -61,6 +61,10 @@ struct nand_flash_dev nand_flash_ids[] = {

	{"SDTNRGAMA 64G 3.3V 8-bit",
		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },

+ {"H27UBG8T2BTR-BC 32G 3.3V 8-bit",
+ { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} },
+ SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
+ NAND_ECC_INFO(40, SZ_1K), 0 },

	{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,

2.1.2

So the older boards were broken these releases?

29.12.2018 21:51, Jagan Teki:

Those with H27UBG8T2BTR chip -- yes:

ECC init failed: -22
failed to init nand chips

Thank you,

Regards,
Nikolai

OK.

Patch was not created properly, failed to apply. I have fixed it and added proper commit message. Please fix it for next time, since it's release time I did it.

Applied to u-boot-spi/master