PPPOE on Arm
Hi,
I was using PPPOE on a raspi and it terminated with "invalid value", while the same setup on x86_64 worked fine.
is anyone working with PPPOE ?
re,
wh
Quoted 1 line · walter harms
I was using PPPOE on a raspi and it terminated with "invalid value",
Which raspi model and which distribution, exactly?
Quoted 1 line
while the same setup on
x86_64worked fine.
Is your pppd configuration unusual in any way?
Quoted 1 line
is anyone working with PPPOE ?
I use pppd and the PPPoE plugin from Debian 9 on a 32 bit armv7l system (i.e. armhf) and it works fine.
Signature · 2 lines
ciao, Marco
Am 05.05.2019 19:57, schrieb Marco d'Itri:
Quoted 5 lines · walter harms
Quoted 2 lines
I was using PPPOE on a raspi and it terminated with "invalid value",
Which raspi model and which distribution, exactly?
raspi3 with raspian (it was for testing, only)
I tried also different kernels but no success.
Quoted 3 lines
Quoted 1 line
while the same setup on
x86_64worked fine.Is your pppd configuration unusual in any way?
not really, but i need a VLAN (eth0.7)
this is the line i used for testing, it includes everything.
/usr/bin/setsid /usr/sbin/pppd pty '/usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth0.7 -T 80 -U -m 1412' noipdefault noauth default-asyncmap defaultroute hide-password nodetach mtu 1492 mru 1492 noaccomp nodeflate nopcomp novj novjccomp user xxxxx lcp-echo-interval 20 lcp-echo-failure 3
Quoted 4 lines
Quoted 1 line
is anyone working with PPPOE ?
I use pppd and the PPPoE plugin from Debian 9 on a 32 bit armv7l system (i.e. armhf) and it works fine.