dts: hi3660: Add support for basic usb gadget on Hikey960
Subsystems (2)
PATCH RESEND 1/1 dts: hi3660: Add support for basic usb gadget on Hikey960
This patch adds basic core dwc3, usb phy and rt1711h nodes for usb support on Hikey960.
This does not enable the mux/hub functionality on the board, so the USB-A host ports will not function, but does allow the USB-C port to function in gadget mode (unfortunately not in host, as the hub/mux functionality is needed to enable vbus output to power devices in host mode).
This is based on an old patch originally by Yu Chen.
--- .../boot/dts/hisilicon/hi3660-hikey960.dts | 72 +++++++++++++++++++ arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 34 +++++++++ 2 files changed, 106 insertions(+)
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +72 -0
@@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/usb/pd.h> / { model = "HiKey960";
@@ -526,6 +527,48 @@ &i2c1 { status = "okay"; + rt1711h: rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + status = "ok"; + interrupt-parent = <&gpio27>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_cfg_func>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 5000, 1000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&dwc3_ss>; + }; + }; + }; + }; + port { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + }; + }; + adv7533: adv7533@39 { status = "ok"; compatible = "adi,adv7533";
@@ -612,3 +655,32 @@ interrupts = <3 IRQ_TYPE_EDGE_RISING>; }; }; + +&dwc3 { /* USB */ + dr_mode = "otg"; + maximum-speed = "super-speed"; + phy_type = "utmi"; + snps,dis-del-phy-power-chg-quirk; + snps,lfps_filter_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,tx_de_emphasis_quirk; + snps,tx_de_emphasis = <1>; + snps,dis_enblslpm_quirk; + snps,gctl-reset-quirk; + usb-role-switch; + role-switch-default-mode = "host"; + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&rt1711h_ep>; + }; + + dwc3_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_con_ss>; + }; + }; +};
arch/arm64/boot/dts/hisilicon/hi3660.dtsi +34 -0
@@ -1152,6 +1152,40 @@ }; }; }; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb_phy: usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; + + dwc3: dwc3@ff100000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff100000 0x0 0x100000>; + + clocks = <&crg_ctrl HI3660_CLK_ABB_USB>, + <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + clock-names = "ref", "bus_early"; + + assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + assigned-clock-rates = <229000000>; + + resets = <&crg_rst 0x90 8>, + <&crg_rst 0x90 7>, + <&crg_rst 0x90 6>, + <&crg_rst 0x90 5>; + + interrupts = <0 159 4>, <0 161 4>; + phys = <&usb_phy>; + phy-names = "usb3-phy"; + }; }; };
Signature · 1 line
2.17.1
Wei Xu
maintainerHi John,
Quoted 11 lines · John Stultz
This patch adds basic core dwc3, usb phy and rt1711h nodes for usb support on Hikey960.
This does not enable the mux/hub functionality on the board, so the USB-A host ports will not function, but does allow the USB-C port to function in gadget mode (unfortunately not in host, as the hub/mux functionality is needed to enable vbus output to power devices in host mode).
This is based on an old patch originally by Yu Chen.
Quoted 11 lines
Cc Yu Chen <[email protected]>Cc Chunfeng Yun <[email protected]>Cc Wei Xu <[email protected]>Cc Binghui Wang <[email protected]>Cc YongQin Liu <[email protected]>Cc Rob Herring <[email protected]>Cc Matthias Brugger <[email protected]>Cc Mark Rutland <[email protected]>Signed-off-by John Stultz <[email protected]>
Thanks!
Applied to the hisilicon arm64 dt tree.
Best Regards,
Wei
Quoted 145 lines
--- .../boot/dts/hisilicon/hi3660-hikey960.dts | 72 +++++++++++++++++++ arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 34 +++++++++ 2 files changed, 106 insertions(+)arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +72
-0@@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/usb/pd.h> / { model = "HiKey960";@@ -526,6 +527,48 @@ &i2c1 { status = "okay"; + rt1711h: rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + status = "ok"; + interrupt-parent = <&gpio27>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_cfg_func>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 5000, 1000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&dwc3_ss>; + }; + }; + }; + }; + port { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + }; + }; + adv7533: adv7533@39 { status = "ok"; compatible = "adi,adv7533";@@ -612,3 +655,32 @@ interrupts = <3 IRQ_TYPE_EDGE_RISING>; }; }; + +&dwc3 { /* USB */ + dr_mode = "otg"; + maximum-speed = "super-speed"; + phy_type = "utmi"; + snps,dis-del-phy-power-chg-quirk; + snps,lfps_filter_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,tx_de_emphasis_quirk; + snps,tx_de_emphasis = <1>; + snps,dis_enblslpm_quirk; + snps,gctl-reset-quirk; + usb-role-switch; + role-switch-default-mode = "host"; + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&rt1711h_ep>; + }; + + dwc3_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_con_ss>; + }; + }; +};arch/arm64/boot/dts/hisilicon/hi3660.dtsi +34
-0@@ -1152,6 +1152,40 @@ }; }; }; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb_phy: usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; + + dwc3: dwc3@ff100000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff100000 0x0 0x100000>; + + clocks = <&crg_ctrl HI3660_CLK_ABB_USB>, + <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + clock-names = "ref", "bus_early"; + + assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + assigned-clock-rates = <229000000>; + + resets = <&crg_rst 0x90 8>, + <&crg_rst 0x90 7>, + <&crg_rst 0x90 6>, + <&crg_rst 0x90 5>; + + interrupts = <0 159 4>, <0 161 4>; + phys = <&usb_phy>; + phy-names = "usb3-phy"; + }; }; };