Skip to contentSkip to conversation

2.6.11-rc3-bk9 hangs hard my laptop

DISCUSSION Alessandro Suardi 2 participants 8 messages Feb 12, 2005 – Feb 13, 2005

lore
Share & tools
lore
#0 lore raw

Dell Latitude C640, PIV @1.8Ghz, 1GB RAM, uptodate FC2

-bk7 (which I currently rebooted in) is okay.
-bk9 at first try got me to the login prompt, logged in, ran startx...
frozen with the black background before seeing anything.

Second try hung well before, at the point where it switches the
radeonfb on.

Only cure is to keep the power button pressed for 10".

Will try building -bk8 (which is currently running on my
old desktop K7-800) and report...

--alessandro

"There is no distance that I don't see
I do have a will - No limit to my reach"

(Wallflowers, "Empire In My Mind")

#1 lore raw
Quoted 6 lines · Alessandro Suardi

Dell Latitude C640, PIV @1.8Ghz, 1GB RAM, uptodate FC2

(quoted diff) +0 -2
-bk7 (which I currently rebooted in) is okay.
-bk9 at first try got me to the login prompt, logged in, ran startx...
 frozen with the black background before seeing anything.
Quoted 7 lines

Second try hung well before, at the point where it switches the
radeonfb on.

Only cure is to keep the power button pressed for 10".

Will try building -bk8 (which is currently running on my
old desktop K7-800) and report...

-bk8 which I'm now booted in is also OK, so something
broke between -bk8 and -bk9... attached .config and /var/log/messages from the boot in -bk8 and the one in -bk9 which succeeded before hanging on startx.

Thanks in advance,

--alessandro

"There is no distance that I don't see
I do have a will - No limit to my reach"

(Wallflowers, "Empire In My Mind")

#2 lore raw

Re: 2.6.11-rc3-bk9 (radeon) hangs hard my laptop

Quoted 13 lines · Alessandro Suardi
Quoted 11 lines · Alessandro Suardi

Dell Latitude C640, PIV @1.8Ghz, 1GB RAM, uptodate FC2

(quoted diff) +0 -2
-bk7 (which I currently rebooted in) is okay.
-bk9 at first try got me to the login prompt, logged in, ran startx...
 frozen with the black background before seeing anything.

Second try hung well before, at the point where it switches the
radeonfb on.

Only cure is to keep the power button pressed for 10".

Quoted 7 lines
Quoted 2 lines

Will try building -bk8 (which is currently running on my
old desktop K7-800) and report...

-bk8 which I'm now booted in is also OK, so something
broke between -bk8 and -bk9... attached .config and /var/log/messages from the boot in -bk8 and the one in -bk9 which succeeded before hanging on startx.

It's definitely the new radeon changes - replacing
drivers/video/aty/* and include/video/radeon.h in the -bk9 tree with the ones from -bk8 causes the hang to not reproduce anymore. CC'd Ben and edited subject to more accurately reflect the issue.

Thanks,

--alessandro

"There is no distance that I don't see
I do have a will - No limit to my reach"

(Wallflowers, "Empire In My Mind")

#3 lore raw

Re: 2.6.11-rc3-bk9 (radeon) hangs hard my laptop

Quoted 6 lines

It's definitely the new radeon changes - replacing
drivers/video/aty/* and include/video/radeon.h in the -bk9 tree with the ones from -bk8 causes the hang to not reproduce anymore. CC'd Ben and edited subject to more accurately reflect the issue.

Grrr...

Can you try booting with radeonfb.default_dynclk=-1 and if it doesn't help, radeonfb.default_dynclk=0 on the kernel command line ?

Also, what is the exact revision of the chip ? (send me an lspci -vv dump).

Finally, what X version are you using ?

Ben.

#4 lore raw

Re: 2.6.11-rc3-bk9 (radeon) hangs hard my laptop

Quoted 11 lines · Benjamin Herrenschmidt
Quoted 6 lines

It's definitely the new radeon changes - replacing
drivers/video/aty/* and include/video/radeon.h in the -bk9 tree with the ones from -bk8 causes the hang to not reproduce anymore. CC'd Ben and edited subject to more accurately reflect the issue.

Grrr...

Can you try booting with radeonfb.default_dynclk=-1 and if it doesn't help, radeonfb.default_dynclk=0 on the kernel command line ?

I'm currently booted with -bk9 with default_dynclk = -1 :)

Quoted 2 lines

Also, what is the exact revision of the chip ? (send me an lspci -vv dump).

Here you go:

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation Latitude C640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (2000ns min), Cache Line Size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0000000 (32-bit, prefetchable)
        Region 1: I/O ports at c000 [size=256]
        Region 2: Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-

FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Quoted 1 line

Finally, what X version are you using ?

Latest FC2 RPM - xorg-x11-6.7.0-11.

--alessandro

"There is no distance that I don't see
I do have a will - No limit to my reach"

(Wallflowers, "Empire In My Mind")

#5 lore raw

Re: 2.6.11-rc3-bk9 (radeon) hangs hard my laptop

Quoted 9 lines · Alessandro Suardi
Quoted 7 lines · Benjamin Herrenschmidt
Quoted 6 lines

It's definitely the new radeon changes - replacing
drivers/video/aty/* and include/video/radeon.h in the -bk9 tree with the ones from -bk8 causes the hang to not reproduce anymore. CC'd Ben and edited subject to more accurately reflect the issue.

Quoted 6 lines
Quoted 4 lines

Grrr...

Can you try booting with radeonfb.default_dynclk=-1 and if it doesn't help, radeonfb.default_dynclk=0 on the kernel command line ?

I'm currently booted with -bk9 with default_dynclk = -1 :)

Excellent. You can help me track it down then. Can you look at radeon_pm.c, function

radeon_pm_enable_dynamic_mode()

The code for your chip is after the comment "/* Others */" (the M7 is an RV200 chip). Can you comment out the various bits in there and see if you can locate which one is causing your problem ?

Thanks in advance !

Ben.

#6 lore raw

Re: 2.6.11-rc3-bk9 (radeon) hangs hard my laptop

Quoted 17 lines · Benjamin Herrenschmidt
Quoted 9 lines · Alessandro Suardi
Quoted 7 lines · Benjamin Herrenschmidt
Quoted 6 lines

It's definitely the new radeon changes - replacing
drivers/video/aty/* and include/video/radeon.h in the -bk9 tree with the ones from -bk8 causes the hang to not reproduce anymore. CC'd Ben and edited subject to more accurately reflect the issue.

Quoted 6 lines
Quoted 4 lines

Grrr...

Can you try booting with radeonfb.default_dynclk=-1 and if it doesn't help, radeonfb.default_dynclk=0 on the kernel command line ?

I'm currently booted with -bk9 with default_dynclk = -1 :)

Quoted 8 lines

Excellent. You can help me track it down then. Can you look at radeon_pm.c, function

radeon_pm_enable_dynamic_mode()

The code for your chip is after the comment "/* Others */" (the M7 is an RV200 chip). Can you comment out the various bits in there and see if you can locate which one is causing your problem ?

Commenting out pllCLK_PWRMGT_CNTL alone -> still hangs Commenting out pllCLK_PIN_CNTL in addition -> works

Do you want me to build a kernel with only the pllCLK_PIN_CNTL
instruction commented out or is this enough info ?

Thanks,

--alessandro

"There is no distance that I don't see
I do have a will - No limit to my reach"

(Wallflowers, "Empire In My Mind")

#7 lore raw

Re: 2.6.11-rc3-bk9 (radeon) hangs hard my laptop

Quoted 5 lines · Alessandro Suardi

Commenting out pllCLK_PWRMGT_CNTL alone -> still hangs Commenting out pllCLK_PIN_CNTL in addition -> works

Do you want me to build a kernel with only the pllCLK_PIN_CNTL
instruction commented out or is this enough info ?

You mean you commented out the OUTPLL call ? Ok, what if you only change pllCLK_PIN_CNTL? Also, try not changing it, but commenting out some other bits ? (I'm especially the bits that touch SCLK_CNTL). Sorry for all those tests, but I need to point more precisely where the problem comes from...

Ben.