binutils-2.16.90.0.3: can't compile 2.4.30
PATCH 1/1 binutils-2.16.90.0.3: can't compile 2.4.30
good evening,
updating to binutils 2.16.90.0.3 today resulting in being unable to compile 2.4.30. as it turns out, it's an assembly problem. please accept these two patches:
(1)
# diff -uN linux-2.4.30/arch/i386/kernel/process.c linux-2.4.30.rescue/arch/i386/kernel/process.c --- linux-2.4.30/arch/i386/kernel/process.c Wed Nov 17 12:54:21 2004 +++ linux-2.4.30.rescue/arch/i386/kernel/process.c Sat May 21 22:11:58 2005 @@ -5,6 +5,8 @@ * * Pentium III FXSR, SSE support * Gareth Hughes <[email protected]>, May 2000 + * Sat May 21 22:11:22 MEST 2005 herp - Herbert Rosmanith + * minor fixes for as from binutils-2.16 */
/*
@@ -544,7 +546,7 @@
* Save a segment.
*/
#define savesegment(seg,value) \
- asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value)))
+ asm volatile("movw %%" #seg ",%0":"=m" (*(int *)&(value)))
int copy_thread(int nr, unsigned long clone_flags, unsigned long esp,
unsigned long unused,
@@ -661,8 +663,8 @@
* Save away %fs and %gs. No need to save %es and %ds, as
* those are always kernel segments while inside the kernel. */
- asm volatile("movl %%fs,%0":"=m" (*(int *)&prev->fs));
- asm volatile("movl %%gs,%0":"=m" (*(int *)&prev->gs));
+ asm volatile("movw %%fs,%0":"=m" (*(int *)&prev->fs));
+ asm volatile("movw %%gs,%0":"=m" (*(int *)&prev->gs)); /*
* Restore %fs and %gs.
(2)
include/asm-i386/system.h Sat May 21 22:07:10 2005 renamed from include/asm-i386/system.h Fri May 20 03:41:56 2005 +1 -1
@@ -84,7 +84,7 @@ #define loadsegment(seg,value) \ asm volatile("\n" \ "1:\t" \ - "movl %0,%%" #seg "\n" \ + "movw %0,%%" #seg "\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3:\t" \
---
long explanation follows.
I just updated binutils to 2.16.90.0.3. when compiling 2.4.30, I get the following error:
gcc -D__KERNEL__ -I/data/root/linux-2.4.30.rescue/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i586 -nostdinc -iwithprefix include -DKBUILD_BASENAME=process -c -o process.o process.c
{standard input}: Assembler messages:
{standard input}:738: Error: suffix or operands invalid for mov' {standard input}:739: Error: suffix or operands invalid for mov' {standard input}:832: Error: suffix or operands invalid for mov' {standard input}:833: Error: suffix or operands invalid for mov' {standard input}:884: Error: suffix or operands invalid for mov' {standard input}:885: Error: suffix or operands invalid for mov' {standard input}:887: Error: suffix or operands invalid for mov' {standard input}:899: Error: suffix or operands invalid for mov' make[1]: *** [process.o] Error 1
If we look at the assembly code:
715 .globl copy_thread
716 .type copy_thread,@function
717 copy_thread:
...
737 #APP
738 movl %fs,636(%ebx)
739 movl %gs,640(%ebx)
then it is clear that a movl on a segreg should really be a movw. (same error in 832, 833 and so on: movl vs. movw)
*but* ... why is this code generated in the first place? is this a compiler problem? I'm using gss-2.95.3. copy_thread() doesn have any asm() statement, hm, but then ... *ponder*
ok, the two line are possibly generated by this one:
549 int copy_thread(int nr, unsigned long clone_flags, unsigned long esp,
564 565 savesegment(fs,p->thread.fs); 566 savesegment(gs,p->thread.gs);
ok, I think this is the source of the error:
546 #define savesegment(seg,value) \
547 asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value)))
548this definitely should be a movw, right?
best regards,
h.rosmanith
http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch
Quoted 6 lines · Herbert Rosmanith
good evening,
updating to binutils 2.16.90.0.3 today resulting in being unable to compile 2.4.30. as it turns out, it's an assembly problem.
Hi Herbert,
this seems to be documented in the binutils release notes, which will point you to this:
http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch
Quoted 111 lines
please accept these two patches:
(1)
# diff -uN linux-2.4.30/arch/i386/kernel/process.c linux-2.4.30.rescue/arch/i386/kernel/process.carch/i386/kernel/process.c Sat May 21 22:11:58 2005 renamed from arch/i386/kernel/process.c Wed Nov 17 12:54:21 2004 +5
-3@@ -5,6 +5,8 @@ * * Pentium III FXSR, SSE support * Gareth Hughes <[email protected]>, May 2000 + * Sat May 21 22:11:22 MEST 2005 herp - Herbert Rosmanith + * minor fixes for as from binutils-2.16 */ /*@@ -544,7 +546,7 @@ * Save a segment. */ #define savesegment(seg,value) \ - asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value))) + asm volatile("movw %%" #seg ",%0":"=m" (*(int *)&(value))) int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, unsigned long unused,@@ -661,8 +663,8 @@ * Save away %fs and %gs. No need to save %es and %ds, as * those are always kernel segments while inside the kernel. */ - asm volatile("movl %%fs,%0":"=m" (*(int *)&prev->fs)); - asm volatile("movl %%gs,%0":"=m" (*(int *)&prev->gs)); + asm volatile("movw %%fs,%0":"=m" (*(int *)&prev->fs)); + asm volatile("movw %%gs,%0":"=m" (*(int *)&prev->gs)); /* * Restore %fs and %gs.(2)
include/asm-i386/system.h Sat May 21 22:07:10 2005 renamed from include/asm-i386/system.h Fri May 20 03:41:56 2005 +1
-2@@ -84,7 +84,7 @@ #define loadsegment(seg,value) \ asm volatile("\n" \ "1:\t" \ - "movl %0,%%" #seg "\n" \ + "movw %0,%%" #seg "\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3:\t" \ ---long explanation follows.
I just updated binutils to 2.16.90.0.3. when compiling 2.4.30, I get the following error:
gcc -D__KERNEL__ -I/data/root/linux-2.4.30.rescue/include -Wall
include/asm-i386/system.h Sat May 21 22:07:10 2005 renamed from include/asm-i386/system.h Fri May 20 03:41:56 2005 +0
-3-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i586 -nostdinc -iwithprefix include -DKBUILD_BASENAME=process -c -oprocess.o
process.c
{standard input}: Assembler messages:
{standard input}:738: Error: suffix or operands invalid formov' {standard input}:739: Error: suffix or operands invalid formov' {standard input}:832: Error: suffix or operands invalid formov' {standard input}:833: Error: suffix or operands invalid formov' {standard input}:884: Error: suffix or operands invalid formov' {standard input}:885: Error: suffix or operands invalid formov' {standard input}:887: Error: suffix or operands invalid formov' {standard input}:899: Error: suffix or operands invalid formov' make[1]: *** [process.o] Error 1If we look at the assembly code:
715 .globl
copy_thread
716 .type copy_thread,@function
717copy_thread:
...
737 #APP
738 movl %fs,636(%ebx)
739 movl %gs,640(%ebx)then it is clear that a movl on a segreg should really be a movw. (same error in 832, 833 and so on: movl vs. movw)
*but* ... why is this code generated in the first place? is this a compiler problem? I'm using gss-2.95.3.
copy_thread()doesn have anyasm()statement, hm, but then ... *ponder*ok, the two line are possibly generated by this one:
549 int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, 564 565 savesegment(fs,p->thread.fs); 566 savesegment(gs,p->thread.gs);ok, I think this is the source of the error:
546 #define savesegment(seg,value) \ 547 asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value))) 548
Quoted 4 lines
this definitely should be a movw, right?
best regards,
h.rosmanith
--alessandro
"To love is to find your own soul
Through the soul of the beloved one.
When the beloved one withdraws itself from your soul Then you have lost your soul."
(Edgar Lee Masters, Spoon River Anthology - "Mary McNeely")