4.14.42-stable review

This is the start of the stable review cycle for the 4.14.42 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun May 20 08:15:14 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.42-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.42-rc1

Willy Tarreau <[email protected]>
proc: do not access cmdline nor environ from file-backed areas

James Chapman <[email protected]>
l2tp: revert "l2tp: fix missing print session offset info"

Antony Antony <[email protected]>
xfrm: fix xfrm_do_migrate() with AEAD e.g(AES-GCM)

ethanwu <[email protected]>
btrfs: Take trans lock before access running trans in check_delayed_ref

Herbert Xu <[email protected]>
xfrm: Use __skb_queue_tail in xfrm_trans_queue

Dave Carroll <[email protected]>
scsi: aacraid: Correct hba_send to include iu_type

Paolo Abeni <[email protected]>
udp: fix SO_BINDTODEVICE

Eric Dumazet <[email protected]>
nsh: fix infinite loop

Jianbo Liu <[email protected]>
net/mlx5e: Allow offloading ipv4 header re-write for icmp

Eric Dumazet <[email protected]>
ipv6: fix uninit-value in ip6_multipath_l3_keys()

Stephen Hemminger <[email protected]>
hv_netvsc: set master device

Talat Batheesh <[email protected]>
net/mlx5: Avoid cleaning flow steering table twice during error flow

Tariq Toukan <[email protected]>
net/mlx5e: TX, Use correct counter in dma_map error flow

Jiri Pirko <[email protected]>
net: sched: fix error path in tcf_proto_create() when modules are not configured

Debabrata Banerjee <[email protected]>
bonding: send learning packets for vlans on slave

Debabrata Banerjee <[email protected]>
bonding: do not allow rlb updates to invalid mac

Michael Chan <[email protected]>
tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().

Yuchung Cheng <[email protected]>
tcp: ignore Fast Open on repair mode

Neal Cardwell <[email protected]>
tcp_bbr: fix to zero idle_restart only upon S/ACKed data

Xin Long <[email protected]>
sctp: use the old asoc when making the cookie-ack chunk in dupcook_d

Xin Long <[email protected]>
sctp: remove sctp_chunk_put from fail_mark err path in sctp_ulpevent_make_rcvmsg

Xin Long <[email protected]>
sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addr

Xin Long <[email protected]>
sctp: fix the issue that the cookie-ack with auth can't get processed

Xin Long <[email protected]>
sctp: delay the authentication for the duplicated cookie-echo chunk

Eric Dumazet <[email protected]>
rds: do not leak kernel memory to user land

Heiner Kallweit <[email protected]>

    r8169: fix powering up RTL8168h

Bjørn Mork <[email protected]>
qmi_wwan: do not steal interfaces from class drivers

Stefano Brivio <[email protected]>
openvswitch: Don't swap table in nlattr_set() after OVS_ATTR_NESTED is found

Andre Tomt <[email protected]>
net/tls: Fix connection stall on partial tls record

Dave Watson <[email protected]>
net/tls: Don't recursively call push_record during tls_write_space callbacks

Lance Richardson <[email protected]>
net: support compat 64-bit time in {s,g}etsockopt

Eric Dumazet <[email protected]>
net_sched: fq: take care of throttled flows before reuse

Roman Mashak <[email protected]>
net sched actions: fix refcnt leak in skbmod

Adi Nissim <[email protected]>
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics

Roi Dayan <[email protected]>
net/mlx5e: Err if asked to offload TC match on frag being first

Moshe Shemesh <[email protected]>
net/mlx4_en: Verify coalescing parameters are in range

Christophe JAILLET <[email protected]>
net/mlx4_en: Fix an error handling path in 'mlx4_en_init_netdev()'

Grygorii Strashko <[email protected]>
net: ethernet: ti: cpsw: fix packet leaking in dual_mac mode

Rob Taglang <[email protected]>
net: ethernet: sun: niu set correct packet size in skb

Eric Dumazet <[email protected]>
llc: better deal with too small mtu

Andrey Ignatov <[email protected]>
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg

Julian Anastasov <[email protected]>
ipv4: fix fnhe usage by non-cached routes

Eric Dumazet <[email protected]>
dccp: fix tasklet usage

Hangbin Liu <[email protected]>
bridge: check iface upper dev when setting master via ioctl

Ingo Molnar <[email protected]>

    8139too: Use disable_irq_nosync() in rtl8139_poll_controller()

-------------

Diffstat:

 Makefile                                          |   4 +-
 drivers/net/bonding/bond_alb.c                    |  15 +--
 drivers/net/bonding/bond_main.c                   |   2 +
 drivers/net/ethernet/broadcom/tg3.c               |   9 +-
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c   |  16 +++
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c    |   8 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h      |   7 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c   |   7 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c   |  20 ++--
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c |  11 +-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |  23 +++--
 drivers/net/ethernet/realtek/8139too.c            |   2 +-
 drivers/net/ethernet/realtek/r8169.c              |   3 +
 drivers/net/ethernet/sun/niu.c                    |   5 +-
 drivers/net/ethernet/ti/cpsw.c                    |   2 +
 drivers/net/hyperv/netvsc_drv.c                   |   3 +-
 drivers/net/usb/qmi_wwan.c                        |  12 +++
 drivers/scsi/aacraid/commsup.c                    |   8 +-
 fs/btrfs/extent-tree.c                            |   7 ++
 fs/proc/base.c                                    |   8 +-
 include/linux/mm.h                                |   1 +
 include/net/bonding.h                             |   1 +
 include/net/tls.h                                 |   1 +
 mm/gup.c                                          |   3 +
 net/bridge/br_if.c                                |   4 +-
 net/compat.c                                      |   6 +-
 net/dccp/ccids/ccid2.c                            |  14 ++-
 net/dccp/timer.c                                  |   2 +-
 net/ipv4/ping.c                                   |   7 +-
 net/ipv4/route.c                                  | 118 ++++++++++------------
 net/ipv4/tcp.c                                    |   3 +-
 net/ipv4/tcp_bbr.c                                |   4 +-
 net/ipv4/udp.c                                    |  11 +-
 net/ipv6/route.c                                  |   7 +-
 net/ipv6/udp.c                                    |   4 +-
 net/l2tp/l2tp_netlink.c                           |   2 -
 net/llc/af_llc.c                                  |   3 +
 net/nsh/nsh.c                                     |   2 +
 net/openvswitch/flow_netlink.c                    |   9 +-
 net/rds/recv.c                                    |   1 +
 net/sched/act_skbmod.c                            |   5 +-
 net/sched/cls_api.c                               |   2 +-
 net/sched/sch_fq.c                                |  37 ++++---
 net/sctp/associola.c                              |  30 +++++-
 net/sctp/inqueue.c                                |   2 +-
 net/sctp/ipv6.c                                   |   3 +
 net/sctp/sm_statefuns.c                           |  88 ++++++++--------
 net/sctp/ulpevent.c                               |   1 -
 net/tls/tls_main.c                                |   8 ++
 net/xfrm/xfrm_input.c                             |   2 +-
 net/xfrm/xfrm_state.c                             |   1 +
 51 files changed, 349 insertions(+), 205 deletions(-)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ingo Molnar <[email protected]>

[ Upstream commit af3e0fcf78879f718c5f73df0814951bd7057d34 ]

Use disable_irq_nosync() instead of disable_irq() as this might be called in atomic context with netpoll.

---
 drivers/net/ethernet/realtek/8139too.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2224,7 +2224,7 @@ static void rtl8139_poll_controller(stru
 	struct rtl8139_private *tp = netdev_priv(dev);
 	const int irq = tp->pci_dev->irq;
 
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	rtl8139_interrupt(irq, dev);
 	enable_irq(irq);
 }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <[email protected]>

[ Upstream commit e8238fc2bd7b4c3c7554fa2df067e796610212fc ]

When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible.

v1 -> v2:
use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device.

---
 net/bridge/br_if.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -503,8 +503,8 @@ int br_add_if(struct net_bridge *br, str
 	if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
 		return -ELOOP;
 
-	/* Device is already being bridged */
-	if (br_port_exists(dev))
+	/* Device has master upper dev */
+	if (netdev_master_upper_dev_get(dev))
 		return -EBUSY;
 
 	/* No bridging devices that dislike that (e.g. wireless) */

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit a8d7aa17bbc970971ccdf71988ea19230ab368b1 ]

syzbot reported a crash in tasklet_action_common() caused by dccp.

dccp needs to make sure socket wont disappear before tasklet handler has completed.

This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet()

kernel BUG at kernel/softirq.c:514!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)

Modules linked in:
CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515
RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246
dccp_close: ABORT with 65423 bytes unread
RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000
RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000
RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94
dccp_close: ABORT with 65423 bytes unread
R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000
R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490
FS:  0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tasklet_action+0x1d/0x20 kernel/softirq.c:533
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
dccp_close: ABORT with 65423 bytes unread
 run_ksoftirqd+0x86/0x100 kernel/softirq.c:646
 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
 kthread+0x345/0x410 kernel/kthread.c:238
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8
RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8

---
 net/dccp/ccids/ccid2.c |   14 ++++++++++++--
 net/dccp/timer.c       |    2 +-
 2 files changed, 13 insertions(+), 3 deletions(-)

@@ -126,6 +126,16 @@ static void ccid2_change_l_seq_window(st
 						  DCCPF_SEQ_WMAX));
 }
 
+static void dccp_tasklet_schedule(struct sock *sk)
+{
+	struct tasklet_struct *t = &dccp_sk(sk)->dccps_xmitlet;
+
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
+		sock_hold(sk);
+		__tasklet_schedule(t);
+	}
+}
+
 static void ccid2_hc_tx_rto_expire(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;

@@ -166,7 +176,7 @@ static void ccid2_hc_tx_rto_expire(unsig
 
 	/* if we were blocked before, we may now send cwnd=1 packet */
 	if (sender_was_blocked)
-		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+		dccp_tasklet_schedule(sk);
 	/* restart backed-off timer */
 	sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto);
 out:

@@ -706,7 +716,7 @@ static void ccid2_hc_tx_packet_recv(stru
 done:
 	/* check if incoming Acks allow pending packets to be sent */
 	if (sender_was_blocked && !ccid2_cwnd_network_limited(hc))
-		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+		dccp_tasklet_schedule(sk);
 	dccp_ackvec_parsed_cleanup(&hc->tx_av_chunks);
 }
 

@@ -230,12 +230,12 @@ static void dccp_write_xmitlet(unsigned
 	else
 		dccp_write_xmit(sk);
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
 
 static void dccp_write_xmit_timer(unsigned long data)
 {
 	dccp_write_xmitlet(data);
-	sock_put((struct sock *)data);
 }
 
 void dccp_init_xmit_timers(struct sock *sk)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <[email protected]>

[ Upstream commit 94720e3aee6884d8c8beb678001629da60ec6366 ]

Allow some non-cached routes to use non-expired fnhe:

1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to:

1.1. use fnhe for non-cached local output routes, with the help from (2)

1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations.

2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+).

3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries

---
 net/ipv4/route.c |  118 ++++++++++++++++++++++++-------------------------------
 1 file changed, 53 insertions(+), 65 deletions(-)

@@ -711,7 +711,7 @@ static void update_or_create_fnhe(struct
 		fnhe->fnhe_daddr = daddr;
 		fnhe->fnhe_gw = gw;
 		fnhe->fnhe_pmtu = pmtu;
-		fnhe->fnhe_expires = expires;
+		fnhe->fnhe_expires = max(1UL, expires);
 
 		/* Exception created; mark the cached routes for the nexthop
 		 * stale, so anyone caching it rechecks if this exception

@@ -1286,6 +1286,36 @@ static unsigned int ipv4_mtu(const struc
 	return mtu - lwtunnel_headroom(dst->lwtstate, mtu);
 }
 
+static void ip_del_fnhe(struct fib_nh *nh, __be32 daddr)
+{
+	struct fnhe_hash_bucket *hash;
+	struct fib_nh_exception *fnhe, __rcu **fnhe_p;
+	u32 hval = fnhe_hashfun(daddr);
+
+	spin_lock_bh(&fnhe_lock);
+
+	hash = rcu_dereference_protected(nh->nh_exceptions,
+					 lockdep_is_held(&fnhe_lock));
+	hash += hval;
+
+	fnhe_p = &hash->chain;
+	fnhe = rcu_dereference_protected(*fnhe_p, lockdep_is_held(&fnhe_lock));
+	while (fnhe) {
+		if (fnhe->fnhe_daddr == daddr) {
+			rcu_assign_pointer(*fnhe_p, rcu_dereference_protected(
+				fnhe->fnhe_next, lockdep_is_held(&fnhe_lock)));
+			fnhe_flush_routes(fnhe);
+			kfree_rcu(fnhe, rcu);
+			break;
+		}
+		fnhe_p = &fnhe->fnhe_next;
+		fnhe = rcu_dereference_protected(fnhe->fnhe_next,
+						 lockdep_is_held(&fnhe_lock));
+	}
+
+	spin_unlock_bh(&fnhe_lock);
+}
+
 static struct fib_nh_exception *find_exception(struct fib_nh *nh, __be32 daddr)
 {
 	struct fnhe_hash_bucket *hash = rcu_dereference(nh->nh_exceptions);

@@ -1299,8 +1329,14 @@ static struct fib_nh_exception *find_exc
 
 	for (fnhe = rcu_dereference(hash[hval].chain); fnhe;
 	     fnhe = rcu_dereference(fnhe->fnhe_next)) {
-		if (fnhe->fnhe_daddr == daddr)
+		if (fnhe->fnhe_daddr == daddr) {
+			if (fnhe->fnhe_expires &&
+			    time_after(jiffies, fnhe->fnhe_expires)) {
+				ip_del_fnhe(nh, daddr);
+				break;
+			}
 			return fnhe;
+		}
 	}
 	return NULL;
 }

@@ -1620,36 +1656,6 @@ static void ip_handle_martian_source(str
 #endif
 }
 
-static void ip_del_fnhe(struct fib_nh *nh, __be32 daddr)
-{
-	struct fnhe_hash_bucket *hash;
-	struct fib_nh_exception *fnhe, __rcu **fnhe_p;
-	u32 hval = fnhe_hashfun(daddr);
-
-	spin_lock_bh(&fnhe_lock);
-
-	hash = rcu_dereference_protected(nh->nh_exceptions,
-					 lockdep_is_held(&fnhe_lock));
-	hash += hval;
-
-	fnhe_p = &hash->chain;
-	fnhe = rcu_dereference_protected(*fnhe_p, lockdep_is_held(&fnhe_lock));
-	while (fnhe) {
-		if (fnhe->fnhe_daddr == daddr) {
-			rcu_assign_pointer(*fnhe_p, rcu_dereference_protected(
-				fnhe->fnhe_next, lockdep_is_held(&fnhe_lock)));
-			fnhe_flush_routes(fnhe);
-			kfree_rcu(fnhe, rcu);
-			break;
-		}
-		fnhe_p = &fnhe->fnhe_next;
-		fnhe = rcu_dereference_protected(fnhe->fnhe_next,
-						 lockdep_is_held(&fnhe_lock));
-	}
-
-	spin_unlock_bh(&fnhe_lock);
-}
-
 static void set_lwt_redirect(struct rtable *rth)
 {
 	if (lwtunnel_output_redirect(rth->dst.lwtstate)) {

@@ -1716,20 +1722,10 @@ static int __mkroute_input(struct sk_buf
 
 	fnhe = find_exception(&FIB_RES_NH(*res), daddr);
 	if (do_cache) {
-		if (fnhe) {
+		if (fnhe)
 			rth = rcu_dereference(fnhe->fnhe_rth_input);
-			if (rth && rth->dst.expires &&
-			    time_after(jiffies, rth->dst.expires)) {
-				ip_del_fnhe(&FIB_RES_NH(*res), daddr);
-				fnhe = NULL;
-			} else {
-				goto rt_cache;
-			}
-		}
-
-		rth = rcu_dereference(FIB_RES_NH(*res).nh_rth_input);
-
-rt_cache:
+		else
+			rth = rcu_dereference(FIB_RES_NH(*res).nh_rth_input);
 		if (rt_cache_valid(rth)) {
 			skb_dst_set_noref(skb, &rth->dst);
 			goto out;

@@ -2206,39 +2202,31 @@ static struct rtable *__mkroute_output(c
 		 * the loopback interface and the IP_PKTINFO ipi_ifindex will
 		 * be set to the loopback interface as well.
 		 */
-		fi = NULL;
+		do_cache = false;
 	}
 
 	fnhe = NULL;
 	do_cache &= fi != NULL;
-	if (do_cache) {
+	if (fi) {
 		struct rtable __rcu **prth;
 		struct fib_nh *nh = &FIB_RES_NH(*res);
 
 		fnhe = find_exception(nh, fl4->daddr);
+		if (!do_cache)
+			goto add;
 		if (fnhe) {
 			prth = &fnhe->fnhe_rth_output;
-			rth = rcu_dereference(*prth);
-			if (rth && rth->dst.expires &&
-			    time_after(jiffies, rth->dst.expires)) {
-				ip_del_fnhe(nh, fl4->daddr);
-				fnhe = NULL;
-			} else {
-				goto rt_cache;
+		} else {
+			if (unlikely(fl4->flowi4_flags &
+				     FLOWI_FLAG_KNOWN_NH &&
+				     !(nh->nh_gw &&
+				       nh->nh_scope == RT_SCOPE_LINK))) {
+				do_cache = false;
+				goto add;
 			}
+			prth = raw_cpu_ptr(nh->nh_pcpu_rth_output);
 		}
-
-		if (unlikely(fl4->flowi4_flags &
-			     FLOWI_FLAG_KNOWN_NH &&
-			     !(nh->nh_gw &&
-			       nh->nh_scope == RT_SCOPE_LINK))) {
-			do_cache = false;
-			goto add;
-		}
-		prth = raw_cpu_ptr(nh->nh_pcpu_rth_output);
 		rth = rcu_dereference(*prth);
-
-rt_cache:
 		if (rt_cache_valid(rth) && dst_hold_safe(&rth->dst))
 			return rth;
 	}

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Ignatov <[email protected]>

[ Upstream commit 1b97013bfb11d66f041de691de6f0fec748ce016 ]

Fix more memory leaks in ip_cmsg_send() callers. Part of them were fixed earlier in 919483096bfe.

* udp_sendmsg one was there since the beginning when linux sources were first added to git;
* ping_v4_sendmsg one was copy/pasted in c319b4d76b9e.

Whenever return happens in udp_sendmsg() or ping_v4_sendmsg() IP options have to be freed if they were allocated previously.

Add label so that future callers (if any) can use it instead of kfree() before return that is easy to forget.

---
 net/ipv4/ping.c |    7 +++++--
 net/ipv4/udp.c  |    7 +++++--
 2 files changed, 10 insertions(+), 4 deletions(-)

@@ -775,8 +775,10 @@ static int ping_v4_sendmsg(struct sock *
 	ipc.addr = faddr = daddr;
 
 	if (ipc.opt && ipc.opt->opt.srr) {
-		if (!daddr)
-			return -EINVAL;
+		if (!daddr) {
+			err = -EINVAL;
+			goto out_free;
+		}
 		faddr = ipc.opt->opt.faddr;
 	}
 	tos = get_rttos(&ipc, inet);

@@ -842,6 +844,7 @@ back_from_confirm:
 
 out:
 	ip_rt_put(rt);
+out_free:
 	if (free)
 		kfree(ipc.opt);
 	if (!err) {

@@ -978,8 +978,10 @@ int udp_sendmsg(struct sock *sk, struct
 	sock_tx_timestamp(sk, ipc.sockc.tsflags, &ipc.tx_flags);
 
 	if (ipc.opt && ipc.opt->opt.srr) {
-		if (!daddr)
-			return -EINVAL;
+		if (!daddr) {
+			err = -EINVAL;
+			goto out_free;
+		}
 		faddr = ipc.opt->opt.faddr;
 		connected = 0;
 	}

@@ -1087,6 +1089,7 @@ do_append_data:
 
 out:
 	ip_rt_put(rt);
+out_free:
 	if (free)
 		kfree(ipc.opt);
 	if (!err)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 2c5d5b13c6eb79f5677e206b8aad59b3a2097f60 ]

syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof.

usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!

kernel BUG at mm/usercopy.c:100!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)

Modules linked in:
CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
Call Trace:
 check_bogus_address mm/usercopy.c:153 [inline]
 __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_from_iter_full include/linux/uio.h:121 [inline]
 memcpy_from_msg include/linux/skbuff.h:3305 [inline]
 llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x455979
RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800

---
 net/llc/af_llc.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -930,6 +930,9 @@ static int llc_ui_sendmsg(struct socket
 	if (size > llc->dev->mtu)
 		size = llc->dev->mtu;
 	copied = size - hdrlen;
+	rc = -EINVAL;
+	if (copied < 0)
+		goto release;
 	release_sock(sk);
 	skb = sock_alloc_send_skb(sk, size, noblock, &rc);
 	lock_sock(sk);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rob Taglang <[email protected]>

[ Upstream commit 14224923c3600bae2ac4dcae3bf0c3d4dc2812be ]

Currently, skb->len and skb->data_len are set to the page size, not the packet size. This causes the frame check sequence to not be located at the "end" of the packet resulting in ethernet frame check errors. The driver does work currently, but stricter kernel facing networking solutions like OpenVSwitch will drop these packets as invalid.

These changes set the packet size correctly so that these errors no longer occur. The length does not include the frame check sequence, so that subtraction was removed.

Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller [108e:abcd] and validated in wireshark.

---
 drivers/net/ethernet/sun/niu.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

@@ -3442,7 +3442,7 @@ static int niu_process_rx_pkt(struct nap
 
 		len = (val & RCR_ENTRY_L2_LEN) >>
 			RCR_ENTRY_L2_LEN_SHIFT;
-		len -= ETH_FCS_LEN;
+		append_size = len + ETH_HLEN + ETH_FCS_LEN;
 
 		addr = (val & RCR_ENTRY_PKT_BUF_ADDR) <<
 			RCR_ENTRY_PKT_BUF_ADDR_SHIFT;

@@ -3452,7 +3452,6 @@ static int niu_process_rx_pkt(struct nap
 					 RCR_ENTRY_PKTBUFSZ_SHIFT];
 
 		off = addr & ~PAGE_MASK;
-		append_size = rcr_size;
 		if (num_rcr == 1) {
 			int ptype;
 

@@ -3465,7 +3464,7 @@ static int niu_process_rx_pkt(struct nap
 			else
 				skb_checksum_none_assert(skb);
 		} else if (!(val & RCR_ENTRY_MULTI))
-			append_size = len - skb->len;
+			append_size = append_size - skb->len;
 
 		niu_rx_skb_append(skb, page, off, append_size, rcr_size);
 		if ((page->index + rp->rbr_block_size) - rcr_size == addr) {

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Grygorii Strashko <[email protected]>

[ Upstream commit 5e5add172ea81152d518b161ec5706503ad3d799 ]

In dual_mac mode packets arrived on one port should not be forwarded by switch hw to another port. Only Linux Host can forward packets between ports. The below test case (reported in [1]) shows that packet arrived on one port can be leaked to anoter (reproducible with dual port evms):
- connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark
- connect port 2 (eth1) to linux Host 1 with vlan 1 configured
- ping <IPx> from Host 1 through vlan 1 interface.
ARP packets will be seen on Host 0.

Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port 1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for each vlan. By default, the ALE will find valid vlan record in its table when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all ports which are vlan 1 members (like Port.

To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will drop ingress packets if Rx port is not VLAN member.

---
 drivers/net/ethernet/ti/cpsw.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1260,6 +1260,8 @@ static inline void cpsw_add_dual_emac_de
 	cpsw_ale_add_ucast(cpsw->ale, priv->mac_addr,
 			   HOST_PORT_NUM, ALE_VLAN |
 			   ALE_SECURE, slave->port_vlan);
+	cpsw_ale_control_set(cpsw->ale, slave_port,
+			     ALE_PORT_DROP_UNKNOWN_VLAN, 1);
 }
 
 static void soft_reset_slave(struct cpsw_slave *slave)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <[email protected]>

[ Upstream commit a577d868b768a3baf16cdd4841ab8cfb165521d6 ]

If an error occurs, 'mlx4_en_destroy_netdev()' is called.
It then calls 'mlx4_en_free_resources()' which does the needed resources cleanup.

So, doing some explicit kfree in the error handling path would lead to some double kfree.

Simplify code to avoid such a case.

---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

@@ -3318,12 +3318,11 @@ int mlx4_en_init_netdev(struct mlx4_en_d
 					   MAX_TX_RINGS, GFP_KERNEL);
 		if (!priv->tx_ring[t]) {
 			err = -ENOMEM;
-			goto err_free_tx;
+			goto out;
 		}
 		priv->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) *
 					 MAX_TX_RINGS, GFP_KERNEL);
 		if (!priv->tx_cq[t]) {
-			kfree(priv->tx_ring[t]);
 			err = -ENOMEM;
 			goto out;
 		}

@@ -3576,11 +3575,6 @@ int mlx4_en_init_netdev(struct mlx4_en_d
 
 	return 0;
 
-err_free_tx:
-	while (t--) {
-		kfree(priv->tx_ring[t]);
-		kfree(priv->tx_cq[t]);
-	}
 out:
 	mlx4_en_destroy_netdev(dev);
 	return err;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Moshe Shemesh <[email protected]>

[ Upstream commit 6ad4e91c6d796b38a7f0e724db1de28eeb122bad ]

Add check of coalescing parameters received through ethtool are within range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx4 modify cq limits the coalescing time parameter and coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to higher values.
Change type of sample-interval and adaptive_rx_coal parameters in mlx4 driver to u32 as the ethtool holds them as u32 and these parameters are not limited due to mlx4 HW.

---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |   16 ++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h    |    7 +++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

@@ -1013,6 +1013,22 @@ static int mlx4_en_set_coalesce(struct n
 	if (!coal->tx_max_coalesced_frames_irq)
 		return -EINVAL;
 
+	if (coal->tx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs_low > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs_high > MLX4_EN_MAX_COAL_TIME) {
+		netdev_info(dev, "%s: maximum coalesce time supported is %d usecs\n",
+			    __func__, MLX4_EN_MAX_COAL_TIME);
+		return -ERANGE;
+	}
+
+	if (coal->tx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS ||
+	    coal->rx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS) {
+		netdev_info(dev, "%s: maximum coalesced frames supported is %d\n",
+			    __func__, MLX4_EN_MAX_COAL_PKTS);
+		return -ERANGE;
+	}
+
 	priv->rx_frames = (coal->rx_max_coalesced_frames ==
 			   MLX4_EN_AUTO_CONF) ?
 				MLX4_EN_RX_COAL_TARGET :

@@ -131,6 +131,9 @@
 #define MLX4_EN_TX_COAL_PKTS	16
 #define MLX4_EN_TX_COAL_TIME	0x10
 
+#define MLX4_EN_MAX_COAL_PKTS	U16_MAX
+#define MLX4_EN_MAX_COAL_TIME	U16_MAX
+
 #define MLX4_EN_RX_RATE_LOW		400000
 #define MLX4_EN_RX_COAL_TIME_LOW	0
 #define MLX4_EN_RX_RATE_HIGH		450000

@@ -547,8 +550,8 @@ struct mlx4_en_priv {
 	u16 rx_usecs_low;
 	u32 pkt_rate_high;
 	u16 rx_usecs_high;
-	u16 sample_interval;
-	u16 adaptive_rx_coal;
+	u32 sample_interval;
+	u32 adaptive_rx_coal;
 	u32 msg_enable;
 	u32 loopback_ok;
 	u32 validate_loopback;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roi Dayan <[email protected]>

[ Upstream commit f85900c3e13fdb61f040c9feecbcda601e0cdcfb ]

The HW doesn't support matching on frag first/later, return error if we are asked to offload that.

---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -780,6 +780,10 @@ static int __parse_cls_flower(struct mlx
 						  f->mask);
 		addr_type = key->addr_type;
 
+		/* the HW doesn't support frag first/later */
+		if (mask->flags & FLOW_DIS_FIRST_FRAG)
+			return -EOPNOTSUPP;
+
 		if (mask->flags & FLOW_DIS_IS_FRAGMENT) {
 			MLX5_SET(fte_match_set_lyr_2_4, headers_c, frag, 1);
 			MLX5_SET(fte_match_set_lyr_2_4, headers_v, frag,

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adi Nissim <[email protected]>

[ Upstream commit 88d725bbb43cd63a40c8ef70dd373f1d38ead2e3 ]

The host side reporting of VF vport statistics didn't include the VF RDMA traffic.

---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

@@ -2054,26 +2054,35 @@ int mlx5_eswitch_get_vport_stats(struct
 	memset(vf_stats, 0, sizeof(*vf_stats));
 	vf_stats->rx_packets =
 		MLX5_GET_CTR(out, received_eth_unicast.packets) +
+		MLX5_GET_CTR(out, received_ib_unicast.packets) +
 		MLX5_GET_CTR(out, received_eth_multicast.packets) +
+		MLX5_GET_CTR(out, received_ib_multicast.packets) +
 		MLX5_GET_CTR(out, received_eth_broadcast.packets);
 
 	vf_stats->rx_bytes =
 		MLX5_GET_CTR(out, received_eth_unicast.octets) +
+		MLX5_GET_CTR(out, received_ib_unicast.octets) +
 		MLX5_GET_CTR(out, received_eth_multicast.octets) +
+		MLX5_GET_CTR(out, received_ib_multicast.octets) +
 		MLX5_GET_CTR(out, received_eth_broadcast.octets);
 
 	vf_stats->tx_packets =
 		MLX5_GET_CTR(out, transmitted_eth_unicast.packets) +
+		MLX5_GET_CTR(out, transmitted_ib_unicast.packets) +
 		MLX5_GET_CTR(out, transmitted_eth_multicast.packets) +
+		MLX5_GET_CTR(out, transmitted_ib_multicast.packets) +
 		MLX5_GET_CTR(out, transmitted_eth_broadcast.packets);
 
 	vf_stats->tx_bytes =
 		MLX5_GET_CTR(out, transmitted_eth_unicast.octets) +
+		MLX5_GET_CTR(out, transmitted_ib_unicast.octets) +
 		MLX5_GET_CTR(out, transmitted_eth_multicast.octets) +
+		MLX5_GET_CTR(out, transmitted_ib_multicast.octets) +
 		MLX5_GET_CTR(out, transmitted_eth_broadcast.octets);
 
 	vf_stats->multicast =
-		MLX5_GET_CTR(out, received_eth_multicast.packets);
+		MLX5_GET_CTR(out, received_eth_multicast.packets) +
+		MLX5_GET_CTR(out, received_ib_multicast.packets);
 
 	vf_stats->broadcast =
 		MLX5_GET_CTR(out, received_eth_broadcast.packets);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roman Mashak <[email protected]>

[ Upstream commit a52956dfc503f8cc5cfe6454959b7049fddb4413 ]

When application fails to pass flags in netlink TLV when replacing existing skbmod action, the kernel will leak refcnt:

$ tc actions get action skbmod index 1
total acts 0

action order 0: skbmod pipe set smac 00:11:22:33:44:55
index 1 ref 1 bind 0

For example, at this point a buggy application replaces the action with index 1 with new smac 00:aa:22:33:44:55, it fails because of zero flags, however refcnt gets bumped:

$ tc actions get actions skbmod index 1
total acts 0

action order 0: skbmod pipe set smac 00:11:22:33:44:55
index 1 ref 2 bind 0
$

Tha patch fixes this by calling tcf_idr_release() on existing actions.

---
 net/sched/act_skbmod.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

@@ -131,8 +131,11 @@ static int tcf_skbmod_init(struct net *n
 	if (exists && bind)
 		return 0;
 
-	if (!lflags)
+	if (!lflags) {
+		if (exists)
+			tcf_idr_release(*a, bind);
 		return -EINVAL;
+	}
 
 	if (!exists) {
 		ret = tcf_idr_create(tn, parm->index, est, a,

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 7df40c2673a1307c3260aab6f9d4b9bf97ca8fd7 ]

Normally, a socket can not be freed/reused unless all its TX packets left qdisc and were TX-completed. However connect(AF_UNSPEC) allows this to happen.

With commit fc59d5bdf1e3 ("pkt_sched: fq: clear time_next_packet for reused flows") we cleared f->time_next_packet but took no special action if the flow was still in the throttled rb-tree.

Since f->time_next_packet is the key used in the rb-tree searches, blindly clearing it might break rb-tree integrity. We need to make sure the flow is no longer in the rb-tree to avoid this problem.

---
 net/sched/sch_fq.c |   37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

@@ -128,6 +128,28 @@ static bool fq_flow_is_detached(const st
 	return f->next == &detached;
 }
 
+static bool fq_flow_is_throttled(const struct fq_flow *f)
+{
+	return f->next == &throttled;
+}
+
+static void fq_flow_add_tail(struct fq_flow_head *head, struct fq_flow *flow)
+{
+	if (head->first)
+		head->last->next = flow;
+	else
+		head->first = flow;
+	head->last = flow;
+	flow->next = NULL;
+}
+
+static void fq_flow_unset_throttled(struct fq_sched_data *q, struct fq_flow *f)
+{
+	rb_erase(&f->rate_node, &q->delayed);
+	q->throttled_flows--;
+	fq_flow_add_tail(&q->old_flows, f);
+}
+
 static void fq_flow_set_throttled(struct fq_sched_data *q, struct fq_flow *f)
 {
 	struct rb_node **p = &q->delayed.rb_node, *parent = NULL;

@@ -155,15 +177,6 @@ static void fq_flow_set_throttled(struct
 
 static struct kmem_cache *fq_flow_cachep __read_mostly;
 
-static void fq_flow_add_tail(struct fq_flow_head *head, struct fq_flow *flow)
-{
-	if (head->first)
-		head->last->next = flow;
-	else
-		head->first = flow;
-	head->last = flow;
-	flow->next = NULL;
-}
 
 /* limit number of collected flows per round */
 #define FQ_GC_MAX 8

@@ -267,6 +280,8 @@ static struct fq_flow *fq_classify(struc
 				     f->socket_hash != sk->sk_hash)) {
 				f->credit = q->initial_quantum;
 				f->socket_hash = sk->sk_hash;
+				if (fq_flow_is_throttled(f))
+					fq_flow_unset_throttled(q, f);
 				f->time_next_packet = 0ULL;
 			}
 			return f;

@@ -438,9 +453,7 @@ static void fq_check_throttled(struct fq
 			q->time_next_delayed_flow = f->time_next_packet;
 			break;
 		}
-		rb_erase(p, &q->delayed);
-		q->throttled_flows--;
-		fq_flow_add_tail(&q->old_flows, f);
+		fq_flow_unset_throttled(q, f);
 	}
 }
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lance Richardson <[email protected]>

[ Upstream commit 988bf7243e03ef69238381594e0334a79cef74a6 ]

For the x32 ABI, struct timeval has two 64-bit fields. However the kernel currently interprets the user-space values used for the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair of 32-bit fields.

When the seconds portion of the requested timeout is less than 2**32, the seconds portion of the effective timeout is correct but the microseconds portion is zero. When the seconds portion of the requested timeout is zero and the microseconds portion is non-zero, the kernel interprets the timeout as zero (never timeout).

Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required for the ABI.

The code included below demonstrates the problem.

Results before patch:

    $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.008181 seconds
    send time: 2.015985 seconds

    $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.016763 seconds
    send time: 2.016062 seconds

    $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 1.007239 seconds
    send time: 1.023890 seconds

Results after patch:

    $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.010062 seconds
    send time: 2.015836 seconds

    $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.013974 seconds
    send time: 2.015981 seconds

    $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.030257 seconds
    send time: 2.013383 seconds

#include <stdio.h>
#include <stdlib.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <sys/time.h>

void checkrc(char *str, int rc)

 {
         if (rc >= 0)
                 return;

         perror(str);
         exit(1);

}

static char buf[1024];
int main(int argc, char **argv)

 {
         int rc;
         int socks[2];
         struct timeval tv;
         struct timeval start, end, delta;

         rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
         checkrc("socketpair", rc);

         /* set timeout to 1.999999 seconds */
         tv.tv_sec = 1;
         tv.tv_usec = 999999;
         rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv);
         rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv);
         checkrc("setsockopt", rc);

         /* measure actual receive timeout */
         gettimeofday(&start, NULL);
         rc = recv(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("recv time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);

         /* fill send buffer */
         do {
                 rc = send(socks[0], buf, sizeof buf, 0);
         } while (rc > 0);

         /* measure actual send timeout */
         gettimeofday(&start, NULL);
         rc = send(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("send time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);
         exit(0);

}

---
 net/compat.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -377,7 +377,8 @@ static int compat_sock_setsockopt(struct
 	    optname == SO_ATTACH_REUSEPORT_CBPF)
 		return do_set_attach_filter(sock, level, optname,
 					    optval, optlen);
-	if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
+	if (!COMPAT_USE_64BIT_TIME &&
+	    (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO))
 		return do_set_sock_timeout(sock, level, optname, optval, optlen);
 
 	return sock_setsockopt(sock, level, optname, optval, optlen);

@@ -442,7 +443,8 @@ static int do_get_sock_timeout(struct so
 static int compat_sock_getsockopt(struct socket *sock, int level, int optname,
 				char __user *optval, int __user *optlen)
 {
-	if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
+	if (!COMPAT_USE_64BIT_TIME &&
+	    (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO))
 		return do_get_sock_timeout(sock, level, optname, optval, optlen);
 	return sock_getsockopt(sock, level, optname, optval, optlen);
 }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Watson <[email protected]>

[ Upstream commit c212d2c7fc4736d49be102fb7a1a545cdc2f1fea ]

It is reported that in some cases, write_space may be called in do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again:

[  660.468802]  ? do_tcp_sendpages+0x8d/0x580
[  660.468826]  ? tls_push_sg+0x74/0x130 [tls]
[  660.468852]  ? tls_push_record+0x24a/0x390 [tls]
[  660.468880]  ? tls_write_space+0x6a/0x80 [tls]

...

tls_push_sg already does a loop over all sending sg's, so ignore any tls_write_space notifications until we are done sending. We then have to call the previous write_space to wake up poll() waiters after we are done with the send loop.

---
 include/net/tls.h  |    1 +
 net/tls/tls_main.c |    7 +++++++
 2 files changed, 8 insertions(+)

@@ -98,6 +98,7 @@ struct tls_context {
 	struct scatterlist *partially_sent_record;
 	u16 partially_sent_offset;
 	unsigned long flags;
+	bool in_tcp_sendpages;
 
 	u16 pending_open_record_frags;
 	int (*push_pending_record)(struct sock *sk, int flags);

@@ -87,6 +87,7 @@ int tls_push_sg(struct sock *sk,
 	size = sg->length - offset;
 	offset += sg->offset;
 
+	ctx->in_tcp_sendpages = true;
 	while (1) {
 		if (sg_is_last(sg))
 			sendpage_flags = flags;

@@ -121,6 +122,8 @@ retry:
 	}
 
 	clear_bit(TLS_PENDING_CLOSED_RECORD, &ctx->flags);
+	ctx->in_tcp_sendpages = false;
+	ctx->sk_write_space(sk);
 
 	return 0;
 }

@@ -190,6 +193,10 @@ static void tls_write_space(struct sock
 {
 	struct tls_context *ctx = tls_get_ctx(sk);
 
+	/* We are already sending pages, ignore notification */
+	if (ctx->in_tcp_sendpages)
+		return;
+
 	if (!sk->sk_write_pending && tls_is_pending_closed_record(ctx)) {
 		gfp_t sk_allocation = sk->sk_allocation;
 		int rc;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andre Tomt <[email protected]>

[ Upstream commit 080324c36ade319f57e505633ab54f6f53289b45 ]

In the case of writing a partial tls record we forgot to clear the ctx->in_tcp_sendpages flag, causing some connections to stall.

---
 net/tls/tls_main.c |    1 +
 1 file changed, 1 insertion(+)

@@ -108,6 +108,7 @@ retry:
 			offset -= sg->offset;
 			ctx->partially_sent_offset = offset;
 			ctx->partially_sent_record = (void *)sg;
+			ctx->in_tcp_sendpages = false;
 			return ret;
 		}
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <[email protected]>

[ Upstream commit 72f17baf2352ded6a1d3f4bb2d15da8c678cd2cb ]

If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one.

However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes.

For example, given this sequence:

1 OVS_KEY_ATTR_PRIORITY
2 OVS_KEY_ATTR_TUNNEL
3 OVS_TUNNEL_KEY_ATTR_ID
4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC
5 OVS_TUNNEL_KEY_ATTR_IPV4_DST
6 OVS_TUNNEL_KEY_ATTR_TTL
7 OVS_TUNNEL_KEY_ATTR_TP_SRC
8 OVS_TUNNEL_KEY_ATTR_TP_DST
9 OVS_KEY_ATTR_IN_PORT
10 OVS_KEY_ATTR_SKB_MARK
11 OVS_KEY_ATTR_MPLS

we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table:

[ 7654.586496] ==================================================================
[ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430
[ 7654.610983]
[ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1
[ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[ 7654.631379] Call Trace:
[ 7654.634108]  [<ffffffffb65a7c50>] dump_stack+0x19/0x1b
[ 7654.639843]  [<ffffffffb53ff373>] print_address_description+0x33/0x290
[ 7654.647129]  [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.654607]  [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330
[ 7654.661406]  [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40
[ 7654.668789]  [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.676076]  [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch]
[ 7654.684234]  [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40
[ 7654.689968]  [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590
[ 7654.696574]  [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch]
[ 7654.705122]  [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0
[ 7654.712503]  [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21
[ 7654.719401]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.726298]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.733195]  [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50
[ 7654.740187]  [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0
[ 7654.746406]  [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20
[ 7654.752914]  [<ffffffffb53fe711>] ? memset+0x31/0x40
[ 7654.758456]  [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch]

[snip]

[ 7655.132484] The buggy address belongs to the variable:
[ 7655.138226]  ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch]
[ 7655.145507]
[ 7655.147166] Memory state around the buggy address:
[ 7655.152514]  ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa
[ 7655.160585]  ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa
[ 7655.176701]                                                              ^
[ 7655.184372]  ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05
[ 7655.192431]  ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.200490] ==================================================================

---
 net/openvswitch/flow_netlink.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

@@ -1404,13 +1404,10 @@ static void nlattr_set(struct nlattr *at
 
 	/* The nlattr stream should already have been validated */
 	nla_for_each_nested(nla, attr, rem) {
-		if (tbl[nla_type(nla)].len == OVS_ATTR_NESTED) {
-			if (tbl[nla_type(nla)].next)
-				tbl = tbl[nla_type(nla)].next;
-			nlattr_set(nla, val, tbl);
-		} else {
+		if (tbl[nla_type(nla)].len == OVS_ATTR_NESTED)
+			nlattr_set(nla, val, tbl[nla_type(nla)].next ? : tbl);
+		else
 			memset(nla_data(nla), val, nla_len(nla));
-		}
 
 		if (nla_type(nla) == OVS_KEY_ATTR_CT_STATE)
 			*(u32 *)nla_data(nla) &= CT_SUPPORTED_MASK;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Bj�rn Mork" <[email protected]>

[ Upstream commit 5697db4a696c41601a1d15c1922150b4dbf5726c ]

The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that the { vendorid, productid, interfacenumber } set uniquely identifies one specific function. This has proven to fail for some configurable devices. One example is the Quectel EM06/EP06 where the same interface number can be either QMI or MBIM, without the device ID changing either.

Fix by requiring the vendor-specific class for interface number based matching. Functions of other classes can and should use class based matching instead.

---
 drivers/net/usb/qmi_wwan.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

@@ -1338,6 +1338,18 @@ static int qmi_wwan_probe(struct usb_int
 		id->driver_info = (unsigned long)&qmi_wwan_info;
 	}
 
+	/* There are devices where the same interface number can be
+	 * configured as different functions. We should only bind to
+	 * vendor specific functions when matching on interface number
+	 */
+	if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER &&
+	    desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) {
+		dev_dbg(&intf->dev,
+			"Rejecting interface number match for class %02x\n",
+			desc->bInterfaceClass);
+		return -ENODEV;
+	}
+
 	/* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
 	if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
 		dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <[email protected]>

[ Upstream commit 3148dedfe79e422f448a10250d3e2cdf8b7ee617 ]

Since commit a92a08499b1f "r8169: improve runtime pm in general and suspend unused ports" interfaces w/o link are runtime-suspended after 10s. On systems where drivers take longer to load this can lead to the situation that the interface is runtime-suspended already when it's initially brought up.
This shouldn't be a problem because rtl_open() resumes MAC/PHY. However with at least one chip version the interface doesn't properly come up, as reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199549

The vendor driver uses a delay to give certain chip versions some time to resume before starting the PHY configuration. So let's do the same. I don't know which chip versions may be affected, therefore apply this delay always.

This patch was reported to fix the issue for RTL8168h. I was able to reproduce the issue on an Asus H310I-Plus which also uses a RTL8168h. Also in my case the patch fixed the issue.

---
 drivers/net/ethernet/realtek/r8169.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -4886,6 +4886,9 @@ static void rtl_pll_power_down(struct rt
 static void rtl_pll_power_up(struct rtl8169_private *tp)
 {
 	rtl_generic_op(tp, tp->pll_power_ops.up);
+
+	/* give MAC/PHY some time to resume */
+	msleep(20);
 }
 
 static void rtl_init_pll_power_ops(struct rtl8169_private *tp)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit eb80ca476ec11f67a62691a93604b405ffc7d80c ]

syzbot/KMSAN reported an uninit-value in put_cmsg(), originating from rds_cmsg_recv().

Simply clear the structure, since we have holes there, or since rx_traces might be smaller than RDS_MSG_RX_DGRAM_TRACE_MAX.

BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in put_cmsg+0x600/0x870 net/core/scm.c:242
CPU: 0 PID: 4459 Comm: syz-executor582 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157
 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
 copy_to_user include/linux/uaccess.h:184 [inline]
 put_cmsg+0x600/0x870 net/core/scm.c:242
 rds_cmsg_recv net/rds/recv.c:570 [inline]
 rds_recvmsg+0x2db5/0x3170 net/rds/recv.c:657
 sock_recvmsg_nosec net/socket.c:803 [inline]
 sock_recvmsg+0x1d0/0x230 net/socket.c:810
 ___sys_recvmsg+0x3fb/0x810 net/socket.c:2205
 __sys_recvmsg net/socket.c:2250 [inline]
 SYSC_recvmsg+0x298/0x3c0 net/socket.c:2262
 SyS_recvmsg+0x54/0x80 net/socket.c:2257
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

---
 net/rds/recv.c |    1 +
 1 file changed, 1 insertion(+)

@@ -558,6 +558,7 @@ static int rds_cmsg_recv(struct rds_inco
 		struct rds_cmsg_rx_trace t;
 		int i, j;
 
+		memset(&t, 0, sizeof(t));
 		inc->i_rx_lat_trace[RDS_MSG_RX_CMSG] = local_clock();
 		t.rx_traces =  rs->rs_rx_traces;
 		for (i = 0; i < rs->rs_rx_traces; i++) {

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 59d8d4434f429b4fa8a346fd889058bda427a837 ]

Now sctp only delays the authentication for the normal cookie-echo chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does authentication first based on the old asoc, which will definitely fail due to the different auth info in the old asoc.

The duplicated cookie-echo chunk will create a new asoc with the auth info from this chunk, and the authentication should also be done with the new asoc's auth info for all of the collision 'A', 'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth will never pass the authentication and create the new connection.

This issue exists since very beginning, and this fix is to make sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does for the normal cookie-echo chunk to delay the authentication.

While at it, remove the unused params from sctp_sf_authenticate() and define sctp_auth_chunk_verify() used for all the places that do the delayed authentication.

v1->v2:
fix the typo in changelog as Marcelo noticed.

---
 net/sctp/associola.c    |   30 ++++++++++++++++
 net/sctp/sm_statefuns.c |   86 +++++++++++++++++++++++++-----------------------
 2 files changed, 75 insertions(+), 41 deletions(-)

@@ -1025,8 +1025,9 @@ static void sctp_assoc_bh_rcv(struct wor
 	struct sctp_endpoint *ep;
 	struct sctp_chunk *chunk;
 	struct sctp_inq *inqueue;
-	int state;
+	int first_time = 1;	/* is this the first time through the loop */
 	int error = 0;
+	int state;
 
 	/* The association should be held so we should be safe. */
 	ep = asoc->ep;

@@ -1037,6 +1038,30 @@ static void sctp_assoc_bh_rcv(struct wor
 		state = asoc->state;
 		subtype = SCTP_ST_CHUNK(chunk->chunk_hdr->type);
 
+		/* If the first chunk in the packet is AUTH, do special
+		 * processing specified in Section 6.3 of SCTP-AUTH spec
+		 */
+		if (first_time && subtype.chunk == SCTP_CID_AUTH) {
+			struct sctp_chunkhdr *next_hdr;
+
+			next_hdr = sctp_inq_peek(inqueue);
+			if (!next_hdr)
+				goto normal;
+
+			/* If the next chunk is COOKIE-ECHO, skip the AUTH
+			 * chunk while saving a pointer to it so we can do
+			 * Authentication later (during cookie-echo
+			 * processing).
+			 */
+			if (next_hdr->type == SCTP_CID_COOKIE_ECHO) {
+				chunk->auth_chunk = skb_clone(chunk->skb,
+							      GFP_ATOMIC);
+				chunk->auth = 1;
+				continue;
+			}
+		}
+
+normal:
 		/* SCTP-AUTH, Section 6.3:
 		 *    The receiver has a list of chunk types which it expects
 		 *    to be received only after an AUTH-chunk.  This list has

@@ -1075,6 +1100,9 @@ static void sctp_assoc_bh_rcv(struct wor
 		/* If there is an error on chunk, discard this packet. */
 		if (error && chunk)
 			chunk->pdiscard = 1;
+
+		if (first_time)
+			first_time = 0;
 	}
 	sctp_association_put(asoc);
 }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit ce402f044e4e432c296f90eaabb8dbe8f3624391 ]

When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp processes auth chunk first, then continues to the next chunk in this packet if chunk_end + chunk_hdr size < skb_tail_pointer(). Otherwise, it will go to the next packet or discard this chunk.

However, it missed the fact that cookie-ack chunk's size is equal to chunk_hdr size, which couldn't match that check, and thus this chunk would not get processed.

This patch fixes it by changing the check to chunk_end + chunk_hdr size <= skb_tail_pointer().

---
 net/sctp/inqueue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -217,7 +217,7 @@ new_skb:
 	skb_pull(chunk->skb, sizeof(*ch));
 	chunk->subh.v = NULL; /* Subheader is no longer valid.  */
 
-	if (chunk->chunk_end + sizeof(*ch) < skb_tail_pointer(chunk->skb)) {
+	if (chunk->chunk_end + sizeof(*ch) <= skb_tail_pointer(chunk->skb)) {
 		/* This is not a singleton */
 		chunk->singleton = 0;
 	} else if (chunk->chunk_end > skb_tail_pointer(chunk->skb)) {

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit d625329b06e46bd20baf9ee40847d11982569204 ]

Since sctp ipv6 socket also supports v4 addrs, it's possible to compare two v4 addrs in pf v6 .cmp_addr, sctp_inet6_cmp_addr.

However after Commit 1071ec9d453a ("sctp: do not check port in sctp_inet6_cmp_addr"), it no longer calls af1->cmp_addr, which in this case is sctp_v4_cmp_addr, but calls __sctp_v6_cmp_addr where it handles them as two v6 addrs. It would cause a out of bounds crash.

syzbot found this crash when trying to bind two v4 addrs to a v6 socket.

This patch fixes it by adding the process for two v4 addrs in sctp_inet6_cmp_addr.

---
 net/sctp/ipv6.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -865,6 +865,9 @@ static int sctp_inet6_cmp_addr(const uni
 	if (sctp_is_any(sk, addr1) || sctp_is_any(sk, addr2))
 		return 1;
 
+	if (addr1->sa.sa_family == AF_INET && addr2->sa.sa_family == AF_INET)
+		return addr1->v4.sin_addr.s_addr == addr2->v4.sin_addr.s_addr;
+
 	return __sctp_v6_cmp_addr(addr1, addr2);
 }
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 6910e25de2257e2c82c7a2d126e3463cd8e50810 ]

In Commit 1f45f78f8e51 ("sctp: allow GSO frags to access the chunk too"), it held the chunk in sctp_ulpevent_make_rcvmsg to access it safely later in recvmsg. However, it also added sctp_chunk_put in fail_mark err path, which is only triggered before holding the chunk.

syzbot reported a use-after-free crash happened on this err path, where it shouldn't call sctp_chunk_put.

This patch simply removes this call.

---
 net/sctp/ulpevent.c |    1 -
 1 file changed, 1 deletion(-)

@@ -717,7 +717,6 @@ struct sctp_ulpevent *sctp_ulpevent_make
 	return event;
 
 fail_mark:
-	sctp_chunk_put(chunk);
 	kfree_skb(skb);
 fail:
 	return NULL;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 46e16d4b956867013e0bbd7f2bad206f4aa55752 ]

When processing a duplicate cookie-echo chunk, for case 'D', sctp will not process the param from this chunk. It means old asoc has nothing to be updated, and the new temp asoc doesn't have the complete info.

So there's no reason to use the new asoc when creating the cookie-ack chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk can not be set with auth, and it will definitely be dropped by peer.

This issue is there since very beginning, and we fix it by using the old asoc instead.

---
 net/sctp/sm_statefuns.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2009,7 +2009,7 @@ static enum sctp_disposition sctp_sf_do_
 		}
 	}
 
-	repl = sctp_make_cookie_ack(new_asoc, chunk);
+	repl = sctp_make_cookie_ack(asoc, chunk);
 	if (!repl)
 		goto nomem;
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Neal Cardwell <[email protected]>

[ Upstream commit e6e6a278b1eaffa19d42186bfacd1ffc15a50b3f ]

Previously the bbr->idle_restart tracking was zeroing out the bbr->idle_restart bit upon ACKs that did not SACK or ACK anything, e.g. receiving incoming data or receiver window updates. In such situations BBR would forget that this was a restart-from-idle situation, and if the min_rtt had expired it would unnecessarily enter PROBE_RTT (even though we were actually restarting from idle but had merely forgotten that fact).

The fix is simple: we need to remember we are restarting from idle until we receive a S/ACK for some data (a S/ACK for the first flight of data we send as we are restarting).

This commit is a stable candidate for kernels back as far as 4.9.

---
 net/ipv4/tcp_bbr.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -802,7 +802,9 @@ static void bbr_update_min_rtt(struct so
 			}
 		}
 	}
-	bbr->idle_restart = 0;
+	/* Restart after idle ends only once we process a new S/ACK for data */
+	if (rs->delivered > 0)
+		bbr->idle_restart = 0;
 }
 
 static void bbr_update_model(struct sock *sk, const struct rate_sample *rs)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <[email protected]>

[ Upstream commit 16ae6aa1705299789f71fdea59bfb119c1fbd9c0 ]

The TCP repair sequence of operation is to first set the socket in repair mode, then inject the TCP stats into the socket with repair socket options, then call connect() to re-activate the socket. The connect syscall simply returns and set state to ESTABLISHED mode. As a result Fast Open is meaningless for TCP repair.

However allowing sendto() system call with MSG_FASTOPEN flag half-way during the repair operation could unexpectedly cause data to be sent, before the operation finishes changing the internal TCP stats (e.g. MSS). This in turn triggers TCP warnings on inconsistent packet accounting.

The fix is to simply disallow Fast Open operation once the socket is in the repair mode.

---
 net/ipv4/tcp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1194,7 +1194,8 @@ int tcp_sendmsg_locked(struct sock *sk,
 			uarg->zerocopy = 0;
 	}
 
-	if (unlikely(flags & MSG_FASTOPEN || inet_sk(sk)->defer_connect)) {
+	if (unlikely(flags & MSG_FASTOPEN || inet_sk(sk)->defer_connect) &&
+	    !tp->repair) {
 		err = tcp_sendmsg_fastopen(sk, msg, &copied_syn, size);
 		if (err == -EINPROGRESS && copied_syn > 0)
 			goto out;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Chan <[email protected]>

[ Upstream commit d89a2adb8bfe6f8949ff389acdb9fa298b6e8e12 ]

tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats under spinlock and can trigger BUG_ON() in vunmap() because vunmap() may sleep. Fix it by removing the spinlock and relying on the TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between tg3_get_stats64() and tg3_free_consistent(). TG3_FLAG_INIT_COMPLETE is always cleared under tp->lock before tg3_free_consistent() and therefore tg3_get_stats64() can safely access tp->hw_stats under tp->lock if TG3_FLAG_INIT_COMPLETE is set.

---
 drivers/net/ethernet/broadcom/tg3.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

@@ -8723,14 +8723,15 @@ static void tg3_free_consistent(struct t
 	tg3_mem_rx_release(tp);
 	tg3_mem_tx_release(tp);
 
-	/* Protect tg3_get_stats64() from reading freed tp->hw_stats. */
-	tg3_full_lock(tp, 0);
+	/* tp->hw_stats can be referenced safely:
+	 *     1. under rtnl_lock
+	 *     2. or under tp->lock if TG3_FLAG_INIT_COMPLETE is set.
+	 */
 	if (tp->hw_stats) {
 		dma_free_coherent(&tp->pdev->dev, sizeof(struct tg3_hw_stats),
 				  tp->hw_stats, tp->stats_mapping);
 		tp->hw_stats = NULL;
 	}
-	tg3_full_unlock(tp);
 }
 
 /*

@@ -14167,7 +14168,7 @@ static void tg3_get_stats64(struct net_d
 	struct tg3 *tp = netdev_priv(dev);
 
 	spin_lock_bh(&tp->lock);
-	if (!tp->hw_stats) {
+	if (!tp->hw_stats || !tg3_flag(tp, INIT_COMPLETE)) {
 		*stats = tp->net_stats_prev;
 		spin_unlock_bh(&tp->lock);
 		return;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Debabrata Banerjee <[email protected]>

[ Upstream commit 4fa8667ca3989ce14cf66301fa251544fbddbdd0 ]

Make sure multicast, broadcast, and zero mac's cannot be the output of rlb updates, which should all be directed arps. Receive load balancing will be collapsed if any of these happen, as the switch will broadcast.

---
 drivers/net/bonding/bond_alb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -450,7 +450,7 @@ static void rlb_update_client(struct rlb
 {
 	int i;
 
-	if (!client_info->slave)
+	if (!client_info->slave || !is_valid_ether_addr(client_info->mac_dst))
 		return;
 
 	for (i = 0; i < RLB_ARP_BURST_SIZE; i++) {

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Debabrata Banerjee <[email protected]>

[ Upstream commit 21706ee8a47d3ede7fdae0be6d7c0a0e31a83229 ]

There was a regression at some point from the intended functionality of commit f60c3704e87d ("bonding: Fix alb mode to only use first level vlans.")

Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent.

In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan.

---
 drivers/net/bonding/bond_alb.c  |   13 ++++++++-----
 drivers/net/bonding/bond_main.c |    2 ++
 include/net/bonding.h           |    1 +
 3 files changed, 11 insertions(+), 5 deletions(-)

@@ -943,6 +943,10 @@ static void alb_send_lp_vid(struct slave
 	skb->priority = TC_PRIO_CONTROL;
 	skb->dev = slave->dev;
 
+	netdev_dbg(slave->bond->dev,
+		   "Send learning packet: dev %s mac %pM vlan %d\n",
+		   slave->dev->name, mac_addr, vid);
+
 	if (vid)
 		__vlan_hwaccel_put_tag(skb, vlan_proto, vid);
 

@@ -965,14 +969,13 @@ static int alb_upper_dev_walk(struct net
 	u8 *mac_addr = data->mac_addr;
 	struct bond_vlan_tag *tags;
 
-	if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0) {
-		if (strict_match &&
-		    ether_addr_equal_64bits(mac_addr,
-					    upper->dev_addr)) {
+	if (is_vlan_dev(upper) &&
+	    bond->nest_level == vlan_get_encap_level(upper) - 1) {
+		if (upper->addr_assign_type == NET_ADDR_STOLEN) {
 			alb_send_lp_vid(slave, mac_addr,
 					vlan_dev_vlan_proto(upper),
 					vlan_dev_vlan_id(upper));
-		} else if (!strict_match) {
+		} else {
 			alb_send_lp_vid(slave, upper->dev_addr,
 					vlan_dev_vlan_proto(upper),
 					vlan_dev_vlan_id(upper));

@@ -1734,6 +1734,8 @@ int bond_enslave(struct net_device *bond
 	if (bond_mode_uses_xmit_hash(bond))
 		bond_update_slave_arr(bond, NULL);
 
+	bond->nest_level = dev_get_nest_level(bond_dev);
+
 	netdev_info(bond_dev, "Enslaving %s as %s interface with %s link\n",
 		    slave_dev->name,
 		    bond_is_active_slave(new_slave) ? "an active" : "a backup",

@@ -198,6 +198,7 @@ struct bonding {
 	struct   slave __rcu *primary_slave;
 	struct   bond_up_slave __rcu *slave_arr; /* Array of usable slaves */
 	bool     force_primary;
+	u32      nest_level;
 	s32      slave_cnt; /* never change this value outside the attach/detach wrappers */
 	int     (*recv_probe)(const struct sk_buff *, struct bonding *,
 			      struct slave *);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Pirko <[email protected]>

[ Upstream commit d68d75fdc34b0253c2bded7ed18cd60eb5a9599b ]

In case modules are not configured, error out when tp->ops is null and prevent later null pointer dereference.

---
 net/sched/cls_api.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -151,8 +151,8 @@ static struct tcf_proto *tcf_proto_creat
 		} else {
 			err = -ENOENT;
 		}
-		goto errout;
 #endif
+		goto errout;
 	}
 	tp->classify = tp->ops->classify;
 	tp->protocol = protocol;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tariq Toukan <[email protected]>

[ Upstream commit d9a96ec362e3da878c378854e25321c85bac52c2 ]

In case of a dma_mapping_error, do not use wi->num_dma as a parameter for dma unmap function because it's yet to be set, and holds an out-of-date value. Use actual value (local variable num_dma) instead.

---
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

@@ -234,7 +234,7 @@ mlx5e_txwqe_build_dsegs(struct mlx5e_txq
 		dma_addr = dma_map_single(sq->pdev, skb_data, headlen,
 					  DMA_TO_DEVICE);
 		if (unlikely(dma_mapping_error(sq->pdev, dma_addr)))
-			return -ENOMEM;
+			goto dma_unmap_wqe_err;
 
 		dseg->addr       = cpu_to_be64(dma_addr);
 		dseg->lkey       = sq->mkey_be;

@@ -252,7 +252,7 @@ mlx5e_txwqe_build_dsegs(struct mlx5e_txq
 		dma_addr = skb_frag_dma_map(sq->pdev, frag, 0, fsz,
 					    DMA_TO_DEVICE);
 		if (unlikely(dma_mapping_error(sq->pdev, dma_addr)))
-			return -ENOMEM;
+			goto dma_unmap_wqe_err;
 
 		dseg->addr       = cpu_to_be64(dma_addr);
 		dseg->lkey       = sq->mkey_be;

@@ -264,6 +264,10 @@ mlx5e_txwqe_build_dsegs(struct mlx5e_txq
 	}
 
 	return num_dma;
+
+dma_unmap_wqe_err:
+	mlx5e_dma_unmap_wqe_err(sq, num_dma);
+	return -ENOMEM;
 }
 
 static inline void

@@ -355,17 +359,15 @@ static netdev_tx_t mlx5e_sq_xmit(struct
 	num_dma = mlx5e_txwqe_build_dsegs(sq, skb, skb_data, headlen,
 					  (struct mlx5_wqe_data_seg *)cseg + ds_cnt);
 	if (unlikely(num_dma < 0))
-		goto dma_unmap_wqe_err;
+		goto err_drop;
 
 	mlx5e_txwqe_complete(sq, skb, opcode, ds_cnt + num_dma,
 			     num_bytes, num_dma, wi, cseg);
 
 	return NETDEV_TX_OK;
 
-dma_unmap_wqe_err:
+err_drop:
 	sq->stats.dropped++;
-	mlx5e_dma_unmap_wqe_err(sq, wi->num_dma);
-
 	dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;

@@ -594,17 +596,15 @@ netdev_tx_t mlx5i_sq_xmit(struct mlx5e_t
 	num_dma = mlx5e_txwqe_build_dsegs(sq, skb, skb_data, headlen,
 					  (struct mlx5_wqe_data_seg *)cseg + ds_cnt);
 	if (unlikely(num_dma < 0))
-		goto dma_unmap_wqe_err;
+		goto err_drop;
 
 	mlx5e_txwqe_complete(sq, skb, opcode, ds_cnt + num_dma,
 			     num_bytes, num_dma, wi, cseg);
 
 	return NETDEV_TX_OK;
 
-dma_unmap_wqe_err:
+err_drop:
 	sq->stats.dropped++;
-	mlx5e_dma_unmap_wqe_err(sq, wi->num_dma);
-
 	dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Talat Batheesh <[email protected]>

[ Upstream commit 9c26f5f89d01ca21560c6b8a8e4054c271cc3a9c ]

When we fail to initialize the RX root namespace, we need to clean only that and not the entire flow steering.

Currently the code may try to clean the flow steering twice on error witch leads to null pointer deference. Make sure we clean correctly.

---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |   23 +++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

@@ -174,6 +174,7 @@ static void del_flow_group(struct fs_nod
 static void del_fte(struct fs_node *node);
 static bool mlx5_flow_dests_cmp(struct mlx5_flow_destination *d1,
 				struct mlx5_flow_destination *d2);
+static void cleanup_root_ns(struct mlx5_flow_root_namespace *root_ns);
 static struct mlx5_flow_rule *
 find_flow_rule(struct fs_fte *fte,
 	       struct mlx5_flow_destination *dest);

@@ -2041,23 +2042,27 @@ static int create_anchor_flow_table(stru
 
 static int init_root_ns(struct mlx5_flow_steering *steering)
 {
+	int err;
+
 	steering->root_ns = create_root_ns(steering, FS_FT_NIC_RX);
 	if (!steering->root_ns)
-		goto cleanup;
+		return -ENOMEM;
 
-	if (init_root_tree(steering, &root_fs, &steering->root_ns->ns.node))
-		goto cleanup;
+	err = init_root_tree(steering, &root_fs, &steering->root_ns->ns.node);
+	if (err)
+		goto out_err;
 
 	set_prio_attrs(steering->root_ns);
-
-	if (create_anchor_flow_table(steering))
-		goto cleanup;
+	err = create_anchor_flow_table(steering);
+	if (err)
+		goto out_err;
 
 	return 0;
 
-cleanup:
-	mlx5_cleanup_fs(steering->dev);
-	return -ENOMEM;
+out_err:
+	cleanup_root_ns(steering->root_ns);
+	steering->root_ns = NULL;
+	return err;
 }
 
 static void clean_tree(struct fs_node *node)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <[email protected]>

[ Upstream commit 97f3efb64323beb0690576e9d74e94998ad6e82a ]

The hyper-v transparent bonding should have used master_dev_link. The netvsc device should look like a master bond device not like the upper side of a tunnel.

This makes the semantics the same so that userspace applications looking at network devices see the correct master relationshipship.

---
 drivers/net/hyperv/netvsc_drv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1742,7 +1742,8 @@ static int netvsc_vf_join(struct net_dev
 		goto rx_handler_failed;
 	}
 
-	ret = netdev_upper_dev_link(vf_netdev, ndev);
+	ret = netdev_master_upper_dev_link(vf_netdev, ndev,
+					   NULL, NULL);
 	if (ret != 0) {
 		netdev_err(vf_netdev,
 			   "can not set master device %s (err = %d)\n",

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit cea67a2dd6b2419dcc13a39309b9a79a1f773193 ]

syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(), root caused to a bad assumption of ICMP header being already pulled in skb->head

ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug.

BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline]
BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858
CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline]
 rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858
 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884
 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208
 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
 netif_receive_skb+0x230/0x240 net/core/dev.c:4725
 tun_rx_batched drivers/net/tun.c:1555 [inline]
 tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

---
 net/ipv6/route.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

@@ -1222,11 +1222,16 @@ static void ip6_multipath_l3_keys(const
 	const struct ipv6hdr *inner_iph;
 	const struct icmp6hdr *icmph;
 	struct ipv6hdr _inner_iph;
+	struct icmp6hdr _icmph;
 
 	if (likely(outer_iph->nexthdr != IPPROTO_ICMPV6))
 		goto out;
 
-	icmph = icmp6_hdr(skb);
+	icmph = skb_header_pointer(skb, skb_transport_offset(skb),
+				   sizeof(_icmph), &_icmph);
+	if (!icmph)
+		goto out;
+
 	if (icmph->icmp6_type != ICMPV6_DEST_UNREACH &&
 	    icmph->icmp6_type != ICMPV6_PKT_TOOBIG &&
 	    icmph->icmp6_type != ICMPV6_TIME_EXCEED &&

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jianbo Liu <[email protected]>

[ Upstream commit 1ccef350db2f13715040a10df77ae672206004cf ]

For ICMPv4, the checksum is calculated from the ICMP headers and data. Since the ICMPv4 checksum doesn't cover the IP header, we can allow to do L3 header re-write for this protocol.

---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1387,7 +1387,8 @@ static bool modify_header_match_supporte
 	}
 
 	ip_proto = MLX5_GET(fte_match_set_lyr_2_4, headers_v, ip_protocol);
-	if (modify_ip_header && ip_proto != IPPROTO_TCP && ip_proto != IPPROTO_UDP) {
+	if (modify_ip_header && ip_proto != IPPROTO_TCP &&
+	    ip_proto != IPPROTO_UDP && ip_proto != IPPROTO_ICMP) {
 		pr_info("can't offload re-write of ip proto %d\n", ip_proto);
 		return false;
 	}

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit af50e4ba34f4c45e92535364133d4deb5931c1c5 ]

syzbot caught an infinite recursion in nsh_gso_segment().

Problem here is that we need to make sure the NSH header is of reasonable length.

BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48  max: 48!
48 locks held by syz-executor0/10189:
 #0:         (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
 #1:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #1:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #2:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #2:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #3:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #3:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #4:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #4:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #5:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #5:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #6:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #6:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #7:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #7:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #8:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #8:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #9:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #9:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #10:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #10:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #11:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #11:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #12:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #12:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #13:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #13:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #14:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #14:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #15:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #15:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #16:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #16:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #17:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #17:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #18:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #18:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #19:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #19:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #20:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #20:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #21:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #21:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #22:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #22:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #23:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #23:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #24:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #24:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #25:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #25:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #26:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #26:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #27:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #27:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #28:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #28:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #29:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #29:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #30:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #30:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #31:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #31:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
 #32:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #32:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #33:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #33:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #34:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #34:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #35:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #35:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #36:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #36:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #37:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #37:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #38:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #38:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #39:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #39:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #40:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #40:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #41:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #41:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #42:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #42:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #43:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #43:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #44:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #44:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #45:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #45:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #46:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #46:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #47:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #47:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
 rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
 rcu_read_lock include/linux/rcupdate.h:632 [inline]
 skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
 skb_gso_segment include/linux/netdevice.h:4025 [inline]
 validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
 qdisc_restart net/sched/sch_generic.c:399 [inline]
 __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
 __dev_xmit_skb net/core/dev.c:3243 [inline]
 __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
 packet_snd net/packet/af_packet.c:2951 [inline]
 packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

---
 net/nsh/nsh.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -30,6 +30,8 @@ static struct sk_buff *nsh_gso_segment(s
 	if (unlikely(!pskb_may_pull(skb, NSH_BASE_HDR_LEN)))
 		goto out;
 	nsh_len = nsh_hdr_len(nsh_hdr(skb));
+	if (nsh_len < NSH_BASE_HDR_LEN)
+		goto out;
 	if (unlikely(!pskb_may_pull(skb, nsh_len)))
 		goto out;
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

[ Upstream commit 69678bcd4d2dedbc3e8fcd6d7d99f283d83c531a ]

Damir reported a breakage of SO_BINDTODEVICE for UDP sockets. In absence of VRF devices, after commit fb74c27735f0 ("net:
ipv4: add second dif to udp socket lookups") the dif mismatch isn't fatal anymore for UDP socket lookup with non null sk_bound_dev_if, breaking SO_BINDTODEVICE semantics.

This changeset addresses the issue making the dif match mandatory again in the above scenario.

---
 net/ipv4/udp.c |    4 ++--
 net/ipv6/udp.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

@@ -413,9 +413,9 @@ static int compute_score(struct sock *sk
 		bool dev_match = (sk->sk_bound_dev_if == dif ||
 				  sk->sk_bound_dev_if == sdif);
 
-		if (exact_dif && !dev_match)
+		if (!dev_match)
 			return -1;
-		if (sk->sk_bound_dev_if && dev_match)
+		if (sk->sk_bound_dev_if)
 			score += 4;
 	}
 

@@ -164,9 +164,9 @@ static int compute_score(struct sock *sk
 		bool dev_match = (sk->sk_bound_dev_if == dif ||
 				  sk->sk_bound_dev_if == sdif);
 
-		if (exact_dif && !dev_match)
+		if (!dev_match)
 			return -1;
-		if (sk->sk_bound_dev_if && dev_match)
+		if (sk->sk_bound_dev_if)
 			score++;
 	}
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Carroll <[email protected]>

commit 7d3af7d96af7b9f51e1ef67b6f4725f545737da2 upstream.

commit b60710ec7d7a ("scsi: aacraid: enable sending of TMFs from aac_hba_send()") allows aac_hba_send() to send scsi commands, and TMF requests, but the existing code only updates the iu_type for scsi commands. For TMF requests we are sending an unknown iu_type to firmware, which causes a fault.

Include iu_type prior to determining the validity of the command

---
 drivers/scsi/aacraid/commsup.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -752,6 +752,8 @@ int aac_hba_send(u8 command, struct fib
 	int wait;
 	unsigned long flags = 0;
 	unsigned long mflags = 0;
+	struct aac_hba_cmd_req *hbacmd = (struct aac_hba_cmd_req *)
+			fibptr->hw_fib_va;
 
 	fibptr->flags = (FIB_CONTEXT_FLAG | FIB_CONTEXT_FLAG_NATIVE_HBA);
 	if (callback) {

@@ -762,11 +764,9 @@ int aac_hba_send(u8 command, struct fib
 		wait = 1;
 
 
-	if (command == HBA_IU_TYPE_SCSI_CMD_REQ) {
-		struct aac_hba_cmd_req *hbacmd =
-			(struct aac_hba_cmd_req *)fibptr->hw_fib_va;
+	hbacmd->iu_type = command;
 
-		hbacmd->iu_type = command;
+	if (command == HBA_IU_TYPE_SCSI_CMD_REQ) {
 		/* bit1 of request_id must be 0 */
 		hbacmd->request_id =
 			cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu <[email protected]>

commit d16b46e4fd8bc6063624605f25b8c0835bb1fbe3 upstream.

We do not need locking in xfrm_trans_queue because it is designed to use per-CPU buffers. However, the original code incorrectly used skb_queue_tail which takes the lock. This patch switches it to __skb_queue_tail instead.

---
 net/xfrm/xfrm_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -518,7 +518,7 @@ int xfrm_trans_queue(struct sk_buff *skb
 		return -ENOBUFS;
 
 	XFRM_TRANS_SKB_CB(skb)->finish = finish;
-	skb_queue_tail(&trans->queue, skb);
+	__skb_queue_tail(&trans->queue, skb);
 	tasklet_schedule(&trans->tasklet);
 	return 0;
 }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: ethanwu <[email protected]>

commit 998ac6d21cfd6efd58f5edf420bae8839dda9f2a upstream.

In preivous patch:
Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist We avoid starting btrfs transaction and get this information from fs_info->running_transaction directly.

When accessing running_transaction in check_delayed_ref, there's a chance that current transaction will be freed by commit transaction after the NULL pointer check of running_transaction is passed.

After looking all the other places using fs_info->running_transaction, they are either protected by trans_lock or holding the transactions.

Fix this by using trans_lock and increasing the use_count.

---
 fs/btrfs/extent-tree.c |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -3171,7 +3171,11 @@ static noinline int check_delayed_ref(st
 	struct btrfs_transaction *cur_trans;
 	int ret = 0;
 
+	spin_lock(&root->fs_info->trans_lock);
 	cur_trans = root->fs_info->running_transaction;
+	if (cur_trans)
+		refcount_inc(&cur_trans->use_count);
+	spin_unlock(&root->fs_info->trans_lock);
 	if (!cur_trans)
 		return 0;
 

@@ -3180,6 +3184,7 @@ static noinline int check_delayed_ref(st
 	head = btrfs_find_delayed_ref_head(delayed_refs, bytenr);
 	if (!head) {
 		spin_unlock(&delayed_refs->lock);
+		btrfs_put_transaction(cur_trans);
 		return 0;
 	}
 

@@ -3196,6 +3201,7 @@ static noinline int check_delayed_ref(st
 		mutex_lock(&head->mutex);
 		mutex_unlock(&head->mutex);
 		btrfs_put_delayed_ref(&head->node);
+		btrfs_put_transaction(cur_trans);
 		return -EAGAIN;
 	}
 	spin_unlock(&delayed_refs->lock);

@@ -3223,6 +3229,7 @@ static noinline int check_delayed_ref(st
 	}
 	spin_unlock(&head->lock);
 	mutex_unlock(&head->mutex);
+	btrfs_put_transaction(cur_trans);
 	return ret;
 }
 

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Antony Antony <[email protected]>

commit 75bf50f4aaa1c78d769d854ab3d975884909e4fb upstream.

copy geniv when cloning the xfrm state.

x->geniv was not copied to the new state and migration would fail.

xfrm_do_migrate
..
xfrm_state_clone()
..
..
esp_init_aead()
crypto_alloc_aead()
crypto_alloc_tfm()
crypto_find_alg() return EAGAIN and failed

---
 net/xfrm/xfrm_state.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1345,6 +1345,7 @@ static struct xfrm_state *xfrm_state_clo
 
 	if (orig->aead) {
 		x->aead = xfrm_algo_aead_clone(orig->aead);
+		x->geniv = orig->geniv;
 		if (!x->aead)
 			goto error;
 	}

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Chapman <[email protected]>

commit de3b58bc359a861d5132300f53f95e83f71954b3 upstream.

Revert commit 820da5357572 ("l2tp: fix missing print session offset info"). The peer_offset parameter is removed.

---
 net/l2tp/l2tp_netlink.c |    2 --
 1 file changed, 2 deletions(-)

@@ -765,8 +765,6 @@ static int l2tp_nl_session_send(struct s
 
 	if ((session->ifname[0] &&
 	     nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) ||
-	    (session->offset &&
-	     nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset)) ||
 	    (session->cookie_len &&
 	     nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len,
 		     &session->cookie[0])) ||

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Willy Tarreau <[email protected]>

commit 7f7ccc2ccc2e70c6054685f5e3522efa81556830 upstream.

proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond.

Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though.

This was assigned CVE-2018-1120.

Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument.

---
 fs/proc/base.c     |    8 ++++----
 include/linux/mm.h |    1 +
 mm/gup.c           |    3 +++
 3 files changed, 8 insertions(+), 4 deletions(-)

@@ -263,7 +263,7 @@ static ssize_t proc_pid_cmdline_read(str
 	 * Inherently racy -- command line shares address space
 	 * with code and data.
 	 */
-	rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0);
+	rv = access_remote_vm(mm, arg_end - 1, &c, 1, FOLL_ANON);
 	if (rv <= 0)
 		goto out_free_page;
 

@@ -281,7 +281,7 @@ static ssize_t proc_pid_cmdline_read(str
 			int nr_read;
 
 			_count = min3(count, len, PAGE_SIZE);
-			nr_read = access_remote_vm(mm, p, page, _count, 0);
+			nr_read = access_remote_vm(mm, p, page, _count, FOLL_ANON);
 			if (nr_read < 0)
 				rv = nr_read;
 			if (nr_read <= 0)

@@ -327,7 +327,7 @@ static ssize_t proc_pid_cmdline_read(str
 				bool final;
 
 				_count = min3(count, len, PAGE_SIZE);
-				nr_read = access_remote_vm(mm, p, page, _count, 0);
+				nr_read = access_remote_vm(mm, p, page, _count, FOLL_ANON);
 				if (nr_read < 0)
 					rv = nr_read;
 				if (nr_read <= 0)

@@ -946,7 +946,7 @@ static ssize_t environ_read(struct file
 		max_len = min_t(size_t, PAGE_SIZE, count);
 		this_len = min(max_len, this_len);
 
-		retval = access_remote_vm(mm, (env_start + src), page, this_len, 0);
+		retval = access_remote_vm(mm, (env_start + src), page, this_len, FOLL_ANON);
 
 		if (retval <= 0) {
 			ret = retval;

@@ -2383,6 +2383,7 @@ static inline struct page *follow_page(s
 #define FOLL_MLOCK	0x1000	/* lock present pages */
 #define FOLL_REMOTE	0x2000	/* we are working on non-current tsk/mm */
 #define FOLL_COW	0x4000	/* internal GUP flag */
+#define FOLL_ANON	0x8000	/* don't do file mappings */
 
 static inline int vm_fault_to_errno(int vm_fault, int foll_flags)
 {

@@ -544,6 +544,9 @@ static int check_vma_flags(struct vm_are
 	if (vm_flags & (VM_IO | VM_PFNMAP))
 		return -EFAULT;
 
+	if (gup_flags & FOLL_ANON && !vma_is_anonymous(vma))
+		return -EFAULT;
+
 	if (write) {
 		if (!(vm_flags & VM_WRITE)) {
 			if (!(gup_flags & FOLL_FORCE))

For v4.14.41-46-g879085a:

Build results:

	total: 146 pass: 146 fail: 0
Qemu test results:
	total: 141 pass: 141 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.14.42-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 879085a4c525940c6c3b08d6a2f49fc064bf02a8
git describe: v4.14.41-46-g879085a4c525
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.41-46-g879085a4c525

No regressions (compared to build v4.14.41-44-g1134b348cdb5)

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c
* boot - pass: 20
* kselftest - skip: 27, pass: 41
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 134, pass: 1016
* ltp-timers-tests - pass: 13

hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 23, pass: 44
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 135, pass: 1015
* ltp-timers-tests - pass: 13

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 25, pass: 43
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 134, pass: 1016
* ltp-timers-tests - pass: 13

qemu_arm
* boot - pass: 21
* kselftest - fail: 2, skip: 29, pass: 37
* libhugetlbfs - pass: 2
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 7, pass: 7
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - fail: 3, skip: 92, pass: 1055
* ltp-timers-tests - pass: 13

qemu_arm64
* boot - pass: 21
* kselftest - skip: 29, pass: 41
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 6, pass: 8
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - fail: 2, skip: 156, pass: 992
* ltp-timers-tests - pass: 13

qemu_x86_64
* boot - pass: 20
* kselftest - skip: 30, pass: 50
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 152, pass: 998
* ltp-timers-tests - pass: 13

x15 - arm
* boot - pass: 20
* kselftest - fail: 2, skip: 26, pass: 36
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 75, pass: 1075
* ltp-timers-tests - pass: 13

x86_64
* boot - pass: 22
* kselftest - skip: 22, pass: 54
* kselftest-vsyscall-mode-native - fail: 1, skip: 22, pass: 53
* kselftest-vsyscall-mode-none - skip: 21, pass: 54
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 116, pass: 1034
* ltp-timers-tests - pass: 13

Linaro QA (BETA)
https://qa-reports.linaro.org

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah