Skip to contentSkip to conversation

4.9.101-stable review

PATCH In review Greg Kroah-Hartman 6 participants 40 messages May 18, 2018

Subsystems (18)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.9.101-stable review

This is the start of the stable review cycle for the 4.9.101 release. There are 33 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun May 20 08:15:20 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.101-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.9.101-rc1

Willy Tarreau <[email protected]>
proc: do not access cmdline nor environ from file-backed areas

Jakub Kicinski <[email protected]>
nfp: TX time stamp packets before HW doorbell is rung

James Chapman <[email protected]>
l2tp: revert "l2tp: fix missing print session offset info"

Greg Kroah-Hartman <[email protected]>
Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"

Vasily Averin <[email protected]>
lockd: lost rollback of set_grace_period() in lockd_down_net()

Antony Antony <[email protected]>
xfrm: fix xfrm_do_migrate() with AEAD e.g(AES-GCM)

Jiri Slaby <[email protected]>
futex: Remove duplicated code and fix undefined behaviour

Alexey Khoroshilov <[email protected]>
serial: sccnxp: Fix error handling in sccnxp_probe()

Xin Long <[email protected]>
sctp: delay the authentication for the duplicated cookie-echo chunk

Xin Long <[email protected]>
sctp: fix the issue that the cookie-ack with auth can't get processed

Yuchung Cheng <[email protected]>
tcp: ignore Fast Open on repair mode

Debabrata Banerjee <[email protected]>
bonding: send learning packets for vlans on slave

Talat Batheesh <[email protected]>
net/mlx5: Avoid cleaning flow steering table twice during error flow

Debabrata Banerjee <[email protected]>
bonding: do not allow rlb updates to invalid mac

Michael Chan <[email protected]>
tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().

Neal Cardwell <[email protected]>
tcp_bbr: fix to zero idle_restart only upon S/ACKed data

Xin Long <[email protected]>
sctp: use the old asoc when making the cookie-ack chunk in dupcook_d

Xin Long <[email protected]>
sctp: remove sctp_chunk_put from fail_mark err path in sctp_ulpevent_make_rcvmsg

Xin Long <[email protected]>
sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addr

Heiner Kallweit <[email protected]>

    r8169: fix powering up RTL8168h

Bjørn Mork <[email protected]>
qmi_wwan: do not steal interfaces from class drivers

Stefano Brivio <[email protected]>
openvswitch: Don't swap table in nlattr_set() after OVS_ATTR_NESTED is found

Lance Richardson <[email protected]>
net: support compat 64-bit time in {s,g}etsockopt

Eric Dumazet <[email protected]>
net_sched: fq: take care of throttled flows before reuse

Adi Nissim <[email protected]>
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics

Moshe Shemesh <[email protected]>
net/mlx4_en: Verify coalescing parameters are in range

Grygorii Strashko <[email protected]>
net: ethernet: ti: cpsw: fix packet leaking in dual_mac mode

Rob Taglang <[email protected]>
net: ethernet: sun: niu set correct packet size in skb

Eric Dumazet <[email protected]>
llc: better deal with too small mtu

Andrey Ignatov <[email protected]>
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg

Eric Dumazet <[email protected]>
dccp: fix tasklet usage

Hangbin Liu <[email protected]>
bridge: check iface upper dev when setting master via ioctl

Ingo Molnar <[email protected]>

    8139too: Use disable_irq_nosync() in rtl8139_poll_controller()

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/alpha/include/asm/futex.h                     | 26 ++-----
 arch/arc/include/asm/futex.h                       | 40 ++--------
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi           |  1 -
 arch/arm/include/asm/futex.h                       | 26 +------
 arch/arm64/include/asm/futex.h                     | 27 +------
 arch/frv/include/asm/futex.h                       |  3 +-
 arch/frv/kernel/futex.c                            | 27 +------
 arch/hexagon/include/asm/futex.h                   | 38 +--------
 arch/ia64/include/asm/futex.h                      | 25 +-----
 arch/microblaze/include/asm/futex.h                | 38 +--------
 arch/mips/include/asm/futex.h                      | 25 +-----
 arch/parisc/include/asm/futex.h                    | 26 +------
 arch/powerpc/include/asm/futex.h                   | 26 ++-----
 arch/s390/include/asm/futex.h                      | 23 ++----
 arch/sh/include/asm/futex.h                        | 26 +------
 arch/sparc/include/asm/futex_64.h                  | 26 ++-----
 arch/tile/include/asm/futex.h                      | 40 ++--------
 arch/x86/include/asm/futex.h                       | 40 ++--------
 arch/xtensa/include/asm/futex.h                    | 27 ++-----
 drivers/net/bonding/bond_alb.c                     | 15 ++--
 drivers/net/bonding/bond_main.c                    |  2 +
 drivers/net/ethernet/broadcom/tg3.c                |  9 ++-
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c    | 16 ++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h       |  7 +-
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c  | 11 ++-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  | 21 +++--
 .../net/ethernet/netronome/nfp/nfp_net_common.c    |  4 +-
 drivers/net/ethernet/realtek/8139too.c             |  2 +-
 drivers/net/ethernet/realtek/r8169.c               |  3 +
 drivers/net/ethernet/sun/niu.c                     |  5 +-
 drivers/net/ethernet/ti/cpsw.c                     |  2 +
 drivers/net/usb/qmi_wwan.c                         | 12 +++
 drivers/tty/serial/sccnxp.c                        | 13 +++-
 fs/lockd/svc.c                                     |  2 +
 fs/proc/base.c                                     | 10 +--
 include/asm-generic/futex.h                        | 50 +++---------
 include/linux/mm.h                                 |  1 +
 include/net/bonding.h                              |  1 +
 kernel/futex.c                                     | 39 ++++++++++
 mm/gup.c                                           |  3 +
 net/bridge/br_if.c                                 |  4 +-
 net/compat.c                                       |  6 +-
 net/dccp/ccids/ccid2.c                             | 14 +++-
 net/dccp/timer.c                                   |  2 +-
 net/ipv4/ping.c                                    |  7 +-
 net/ipv4/tcp.c                                     |  2 +-
 net/ipv4/tcp_bbr.c                                 |  4 +-
 net/ipv4/udp.c                                     |  7 +-
 net/l2tp/l2tp_netlink.c                            |  2 -
 net/llc/af_llc.c                                   |  3 +
 net/openvswitch/flow_netlink.c                     |  9 +--
 net/sched/sch_fq.c                                 | 37 ++++++---
 net/sctp/associola.c                               | 30 +++++++-
 net/sctp/inqueue.c                                 |  2 +-
 net/sctp/ipv6.c                                    |  3 +
 net/sctp/sm_statefuns.c                            | 89 ++++++++++++----------
 net/sctp/ulpevent.c                                |  1 -
 net/xfrm/xfrm_state.c                              |  1 +
 59 files changed, 380 insertions(+), 585 deletions(-)
author maintainer
#1 lore raw

PATCH 1/33 8139too: Use disable_irq_nosync() in rtl8139_poll_controller()

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ingo Molnar <[email protected]>

[ Upstream commit af3e0fcf78879f718c5f73df0814951bd7057d34 ]

Use disable_irq_nosync() instead of disable_irq() as this might be called in atomic context with netpoll.

---
 drivers/net/ethernet/realtek/8139too.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/realtek/8139too.c +1 -1
@@ -2233,7 +2233,7 @@ static void rtl8139_poll_controller(stru
 	struct rtl8139_private *tp = netdev_priv(dev);
 	const int irq = tp->pci_dev->irq;
 
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	rtl8139_interrupt(irq, dev);
 	enable_irq(irq);
 }
author maintainer
#2 lore raw

PATCH 2/33 bridge: check iface upper dev when setting master via ioctl

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <[email protected]>

[ Upstream commit e8238fc2bd7b4c3c7554fa2df067e796610212fc ]

When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible.

v1 -> v2:
use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device.

---
 net/bridge/br_if.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/bridge/br_if.c +2 -2
@@ -504,8 +504,8 @@ int br_add_if(struct net_bridge *br, str
 	if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
 		return -ELOOP;
 
-	/* Device is already being bridged */
-	if (br_port_exists(dev))
+	/* Device has master upper dev */
+	if (netdev_master_upper_dev_get(dev))
 		return -EBUSY;
 
 	/* No bridging devices that dislike that (e.g. wireless) */
author maintainer
#3 lore raw

PATCH 3/33 dccp: fix tasklet usage

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit a8d7aa17bbc970971ccdf71988ea19230ab368b1 ]

syzbot reported a crash in tasklet_action_common() caused by dccp.

dccp needs to make sure socket wont disappear before tasklet handler has completed.

This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet()

kernel BUG at kernel/softirq.c:514!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)

Modules linked in:
CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515
RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246
dccp_close: ABORT with 65423 bytes unread
RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000
RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000
RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94
dccp_close: ABORT with 65423 bytes unread
R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000
R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490
FS:  0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tasklet_action+0x1d/0x20 kernel/softirq.c:533
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
dccp_close: ABORT with 65423 bytes unread
 run_ksoftirqd+0x86/0x100 kernel/softirq.c:646
 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
 kthread+0x345/0x410 kernel/kthread.c:238
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8
RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8
Fixes dc841e30eaea ("dccp: Extend CCID packet dequeueing interface")
Cc Gerrit Renker <[email protected]>
---
 net/dccp/ccids/ccid2.c |   14 ++++++++++++--
 net/dccp/timer.c       |    2 +-
 2 files changed, 13 insertions(+), 3 deletions(-)
net/dccp/ccids/ccid2.c +12 -2
@@ -126,6 +126,16 @@ static void ccid2_change_l_seq_window(st
 						  DCCPF_SEQ_WMAX));
 }
 
+static void dccp_tasklet_schedule(struct sock *sk)
+{
+	struct tasklet_struct *t = &dccp_sk(sk)->dccps_xmitlet;
+
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
+		sock_hold(sk);
+		__tasklet_schedule(t);
+	}
+}
+
 static void ccid2_hc_tx_rto_expire(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
@@ -166,7 +176,7 @@ static void ccid2_hc_tx_rto_expire(unsig
 
 	/* if we were blocked before, we may now send cwnd=1 packet */
 	if (sender_was_blocked)
-		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+		dccp_tasklet_schedule(sk);
 	/* restart backed-off timer */
 	sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto);
 out:
@@ -706,7 +716,7 @@ static void ccid2_hc_tx_packet_recv(stru
 done:
 	/* check if incoming Acks allow pending packets to be sent */
 	if (sender_was_blocked && !ccid2_cwnd_network_limited(hc))
-		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+		dccp_tasklet_schedule(sk);
 	dccp_ackvec_parsed_cleanup(&hc->tx_av_chunks);
 }
 
net/dccp/timer.c +1 -1
@@ -230,12 +230,12 @@ static void dccp_write_xmitlet(unsigned
 	else
 		dccp_write_xmit(sk);
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
 
 static void dccp_write_xmit_timer(unsigned long data)
 {
 	dccp_write_xmitlet(data);
-	sock_put((struct sock *)data);
 }
 
 void dccp_init_xmit_timers(struct sock *sk)
author maintainer
#4 lore raw

PATCH 4/33 ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Ignatov <[email protected]>

[ Upstream commit 1b97013bfb11d66f041de691de6f0fec748ce016 ]

Fix more memory leaks in ip_cmsg_send() callers. Part of them were fixed earlier in 919483096bfe.

* udp_sendmsg one was there since the beginning when linux sources were first added to git;
* ping_v4_sendmsg one was copy/pasted in c319b4d76b9e.

Whenever return happens in udp_sendmsg() or ping_v4_sendmsg() IP options have to be freed if they were allocated previously.

Add label so that future callers (if any) can use it instead of kfree() before return that is easy to forget.

Fixes c319b4d76b9e (net: ipv4: add IPPROTO_ICMP socket kind)
---
 net/ipv4/ping.c |    7 +++++--
 net/ipv4/udp.c  |    7 +++++--
 2 files changed, 10 insertions(+), 4 deletions(-)
net/ipv4/ping.c +5 -2
@@ -775,8 +775,10 @@ static int ping_v4_sendmsg(struct sock *
 	ipc.addr = faddr = daddr;
 
 	if (ipc.opt && ipc.opt->opt.srr) {
-		if (!daddr)
-			return -EINVAL;
+		if (!daddr) {
+			err = -EINVAL;
+			goto out_free;
+		}
 		faddr = ipc.opt->opt.faddr;
 	}
 	tos = get_rttos(&ipc, inet);
@@ -841,6 +843,7 @@ back_from_confirm:
 
 out:
 	ip_rt_put(rt);
+out_free:
 	if (free)
 		kfree(ipc.opt);
 	if (!err) {
net/ipv4/udp.c +5 -2
@@ -982,8 +982,10 @@ int udp_sendmsg(struct sock *sk, struct
 	sock_tx_timestamp(sk, ipc.sockc.tsflags, &ipc.tx_flags);
 
 	if (ipc.opt && ipc.opt->opt.srr) {
-		if (!daddr)
-			return -EINVAL;
+		if (!daddr) {
+			err = -EINVAL;
+			goto out_free;
+		}
 		faddr = ipc.opt->opt.faddr;
 		connected = 0;
 	}
@@ -1090,6 +1092,7 @@ do_append_data:
 
 out:
 	ip_rt_put(rt);
+out_free:
 	if (free)
 		kfree(ipc.opt);
 	if (!err)
author maintainer
#5 lore raw

PATCH 5/33 llc: better deal with too small mtu

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 2c5d5b13c6eb79f5677e206b8aad59b3a2097f60 ]

syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof.

usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!

kernel BUG at mm/usercopy.c:100!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)

Modules linked in:
CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
Call Trace:
 check_bogus_address mm/usercopy.c:153 [inline]
 __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_from_iter_full include/linux/uio.h:121 [inline]
 memcpy_from_msg include/linux/skbuff.h:3305 [inline]
 llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x455979
RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/af_llc.c |    3 +++
 1 file changed, 3 insertions(+)
net/llc/af_llc.c +3 -0
@@ -926,6 +926,9 @@ static int llc_ui_sendmsg(struct socket
 	if (size > llc->dev->mtu)
 		size = llc->dev->mtu;
 	copied = size - hdrlen;
+	rc = -EINVAL;
+	if (copied < 0)
+		goto release;
 	release_sock(sk);
 	skb = sock_alloc_send_skb(sk, size, noblock, &rc);
 	lock_sock(sk);
author maintainer
#6 lore raw

PATCH 6/33 net: ethernet: sun: niu set correct packet size in skb

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rob Taglang <[email protected]>

[ Upstream commit 14224923c3600bae2ac4dcae3bf0c3d4dc2812be ]

Currently, skb->len and skb->data_len are set to the page size, not the packet size. This causes the frame check sequence to not be located at the "end" of the packet resulting in ethernet frame check errors. The driver does work currently, but stricter kernel facing networking solutions like OpenVSwitch will drop these packets as invalid.

These changes set the packet size correctly so that these errors no longer occur. The length does not include the frame check sequence, so that subtraction was removed.

Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller [108e:abcd] and validated in wireshark.

---
 drivers/net/ethernet/sun/niu.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/ethernet/sun/niu.c +2 -3
@@ -3442,7 +3442,7 @@ static int niu_process_rx_pkt(struct nap
 
 		len = (val & RCR_ENTRY_L2_LEN) >>
 			RCR_ENTRY_L2_LEN_SHIFT;
-		len -= ETH_FCS_LEN;
+		append_size = len + ETH_HLEN + ETH_FCS_LEN;
 
 		addr = (val & RCR_ENTRY_PKT_BUF_ADDR) <<
 			RCR_ENTRY_PKT_BUF_ADDR_SHIFT;
@@ -3452,7 +3452,6 @@ static int niu_process_rx_pkt(struct nap
 					 RCR_ENTRY_PKTBUFSZ_SHIFT];
 
 		off = addr & ~PAGE_MASK;
-		append_size = rcr_size;
 		if (num_rcr == 1) {
 			int ptype;
 
@@ -3465,7 +3464,7 @@ static int niu_process_rx_pkt(struct nap
 			else
 				skb_checksum_none_assert(skb);
 		} else if (!(val & RCR_ENTRY_MULTI))
-			append_size = len - skb->len;
+			append_size = append_size - skb->len;
 
 		niu_rx_skb_append(skb, page, off, append_size, rcr_size);
 		if ((page->index + rp->rbr_block_size) - rcr_size == addr) {
author maintainer
#7 lore raw

PATCH 7/33 net: ethernet: ti: cpsw: fix packet leaking in dual_mac mode

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Grygorii Strashko <[email protected]>

[ Upstream commit 5e5add172ea81152d518b161ec5706503ad3d799 ]

In dual_mac mode packets arrived on one port should not be forwarded by switch hw to another port. Only Linux Host can forward packets between ports. The below test case (reported in [1]) shows that packet arrived on one port can be leaked to anoter (reproducible with dual port evms):
- connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark
- connect port 2 (eth1) to linux Host 1 with vlan 1 configured
- ping <IPx> from Host 1 through vlan 1 interface.
ARP packets will be seen on Host 0.

Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port 1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for each vlan. By default, the ALE will find valid vlan record in its table when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all ports which are vlan 1 members (like Port.

To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will drop ingress packets if Rx port is not VLAN member.

---
 drivers/net/ethernet/ti/cpsw.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/ti/cpsw.c +2 -0
@@ -1141,6 +1141,8 @@ static inline void cpsw_add_dual_emac_de
 	cpsw_ale_add_ucast(cpsw->ale, priv->mac_addr,
 			   HOST_PORT_NUM, ALE_VLAN |
 			   ALE_SECURE, slave->port_vlan);
+	cpsw_ale_control_set(cpsw->ale, slave_port,
+			     ALE_PORT_DROP_UNKNOWN_VLAN, 1);
 }
 
 static void soft_reset_slave(struct cpsw_slave *slave)
author maintainer
#8 lore raw

PATCH 8/33 net/mlx4_en: Verify coalescing parameters are in range

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Moshe Shemesh <[email protected]>

[ Upstream commit 6ad4e91c6d796b38a7f0e724db1de28eeb122bad ]

Add check of coalescing parameters received through ethtool are within range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx4 modify cq limits the coalescing time parameter and coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to higher values.
Change type of sample-interval and adaptive_rx_coal parameters in mlx4 driver to u32 as the ethtool holds them as u32 and these parameters are not limited due to mlx4 HW.

Fixes c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC')
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |   16 ++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h    |    7 +++++--
 2 files changed, 21 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +16 -0
@@ -970,6 +970,22 @@ static int mlx4_en_set_coalesce(struct n
 	if (!coal->tx_max_coalesced_frames_irq)
 		return -EINVAL;
 
+	if (coal->tx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs_low > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs_high > MLX4_EN_MAX_COAL_TIME) {
+		netdev_info(dev, "%s: maximum coalesce time supported is %d usecs\n",
+			    __func__, MLX4_EN_MAX_COAL_TIME);
+		return -ERANGE;
+	}
+
+	if (coal->tx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS ||
+	    coal->rx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS) {
+		netdev_info(dev, "%s: maximum coalesced frames supported is %d\n",
+			    __func__, MLX4_EN_MAX_COAL_PKTS);
+		return -ERANGE;
+	}
+
 	priv->rx_frames = (coal->rx_max_coalesced_frames ==
 			   MLX4_EN_AUTO_CONF) ?
 				MLX4_EN_RX_COAL_TARGET :
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +5 -2
@@ -141,6 +141,9 @@ enum {
 #define MLX4_EN_TX_COAL_PKTS	16
 #define MLX4_EN_TX_COAL_TIME	0x10
 
+#define MLX4_EN_MAX_COAL_PKTS	U16_MAX
+#define MLX4_EN_MAX_COAL_TIME	U16_MAX
+
 #define MLX4_EN_RX_RATE_LOW		400000
 #define MLX4_EN_RX_COAL_TIME_LOW	0
 #define MLX4_EN_RX_RATE_HIGH		450000
@@ -543,8 +546,8 @@ struct mlx4_en_priv {
 	u16 rx_usecs_low;
 	u32 pkt_rate_high;
 	u16 rx_usecs_high;
-	u16 sample_interval;
-	u16 adaptive_rx_coal;
+	u32 sample_interval;
+	u32 adaptive_rx_coal;
 	u32 msg_enable;
 	u32 loopback_ok;
 	u32 validate_loopback;
author maintainer
#9 lore raw

PATCH 9/33 net/mlx5: E-Switch, Include VF RDMA stats in vport statistics

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adi Nissim <[email protected]>

[ Upstream commit 88d725bbb43cd63a40c8ef70dd373f1d38ead2e3 ]

The host side reporting of VF vport statistics didn't include the VF RDMA traffic.

Fixes 3b751a2a418a ("net/mlx5: E-Switch, Introduce get vf statistics")
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +10 -1
@@ -1924,26 +1924,35 @@ int mlx5_eswitch_get_vport_stats(struct
 	memset(vf_stats, 0, sizeof(*vf_stats));
 	vf_stats->rx_packets =
 		MLX5_GET_CTR(out, received_eth_unicast.packets) +
+		MLX5_GET_CTR(out, received_ib_unicast.packets) +
 		MLX5_GET_CTR(out, received_eth_multicast.packets) +
+		MLX5_GET_CTR(out, received_ib_multicast.packets) +
 		MLX5_GET_CTR(out, received_eth_broadcast.packets);
 
 	vf_stats->rx_bytes =
 		MLX5_GET_CTR(out, received_eth_unicast.octets) +
+		MLX5_GET_CTR(out, received_ib_unicast.octets) +
 		MLX5_GET_CTR(out, received_eth_multicast.octets) +
+		MLX5_GET_CTR(out, received_ib_multicast.octets) +
 		MLX5_GET_CTR(out, received_eth_broadcast.octets);
 
 	vf_stats->tx_packets =
 		MLX5_GET_CTR(out, transmitted_eth_unicast.packets) +
+		MLX5_GET_CTR(out, transmitted_ib_unicast.packets) +
 		MLX5_GET_CTR(out, transmitted_eth_multicast.packets) +
+		MLX5_GET_CTR(out, transmitted_ib_multicast.packets) +
 		MLX5_GET_CTR(out, transmitted_eth_broadcast.packets);
 
 	vf_stats->tx_bytes =
 		MLX5_GET_CTR(out, transmitted_eth_unicast.octets) +
+		MLX5_GET_CTR(out, transmitted_ib_unicast.octets) +
 		MLX5_GET_CTR(out, transmitted_eth_multicast.octets) +
+		MLX5_GET_CTR(out, transmitted_ib_multicast.octets) +
 		MLX5_GET_CTR(out, transmitted_eth_broadcast.octets);
 
 	vf_stats->multicast =
-		MLX5_GET_CTR(out, received_eth_multicast.packets);
+		MLX5_GET_CTR(out, received_eth_multicast.packets) +
+		MLX5_GET_CTR(out, received_ib_multicast.packets);
 
 	vf_stats->broadcast =
 		MLX5_GET_CTR(out, received_eth_broadcast.packets);
author maintainer
#10 lore raw

PATCH 10/33 net_sched: fq: take care of throttled flows before reuse

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 7df40c2673a1307c3260aab6f9d4b9bf97ca8fd7 ]

Normally, a socket can not be freed/reused unless all its TX packets left qdisc and were TX-completed. However connect(AF_UNSPEC) allows this to happen.

With commit fc59d5bdf1e3 ("pkt_sched: fq: clear time_next_packet for reused flows") we cleared f->time_next_packet but took no special action if the flow was still in the throttled rb-tree.

Since f->time_next_packet is the key used in the rb-tree searches, blindly clearing it might break rb-tree integrity. We need to make sure the flow is no longer in the rb-tree to avoid this problem.

Fixes fc59d5bdf1e3 ("pkt_sched: fq: clear time_next_packet for reused flows")
---
 net/sched/sch_fq.c |   37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)
net/sched/sch_fq.c +25 -12
@@ -128,6 +128,28 @@ static bool fq_flow_is_detached(const st
 	return f->next == &detached;
 }
 
+static bool fq_flow_is_throttled(const struct fq_flow *f)
+{
+	return f->next == &throttled;
+}
+
+static void fq_flow_add_tail(struct fq_flow_head *head, struct fq_flow *flow)
+{
+	if (head->first)
+		head->last->next = flow;
+	else
+		head->first = flow;
+	head->last = flow;
+	flow->next = NULL;
+}
+
+static void fq_flow_unset_throttled(struct fq_sched_data *q, struct fq_flow *f)
+{
+	rb_erase(&f->rate_node, &q->delayed);
+	q->throttled_flows--;
+	fq_flow_add_tail(&q->old_flows, f);
+}
+
 static void fq_flow_set_throttled(struct fq_sched_data *q, struct fq_flow *f)
 {
 	struct rb_node **p = &q->delayed.rb_node, *parent = NULL;
@@ -155,15 +177,6 @@ static void fq_flow_set_throttled(struct
 
 static struct kmem_cache *fq_flow_cachep __read_mostly;
 
-static void fq_flow_add_tail(struct fq_flow_head *head, struct fq_flow *flow)
-{
-	if (head->first)
-		head->last->next = flow;
-	else
-		head->first = flow;
-	head->last = flow;
-	flow->next = NULL;
-}
 
 /* limit number of collected flows per round */
 #define FQ_GC_MAX 8
@@ -267,6 +280,8 @@ static struct fq_flow *fq_classify(struc
 				     f->socket_hash != sk->sk_hash)) {
 				f->credit = q->initial_quantum;
 				f->socket_hash = sk->sk_hash;
+				if (fq_flow_is_throttled(f))
+					fq_flow_unset_throttled(q, f);
 				f->time_next_packet = 0ULL;
 			}
 			return f;
@@ -430,9 +445,7 @@ static void fq_check_throttled(struct fq
 			q->time_next_delayed_flow = f->time_next_packet;
 			break;
 		}
-		rb_erase(p, &q->delayed);
-		q->throttled_flows--;
-		fq_flow_add_tail(&q->old_flows, f);
+		fq_flow_unset_throttled(q, f);
 	}
 }
 
author maintainer
#11 lore raw

PATCH 11/33 net: support compat 64-bit time in {s,g}etsockopt

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lance Richardson <[email protected]>

[ Upstream commit 988bf7243e03ef69238381594e0334a79cef74a6 ]

For the x32 ABI, struct timeval has two 64-bit fields. However the kernel currently interprets the user-space values used for the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair of 32-bit fields.

When the seconds portion of the requested timeout is less than 2**32, the seconds portion of the effective timeout is correct but the microseconds portion is zero. When the seconds portion of the requested timeout is zero and the microseconds portion is non-zero, the kernel interprets the timeout as zero (never timeout).

Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required for the ABI.

The code included below demonstrates the problem.

Results before patch:

    $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.008181 seconds
    send time: 2.015985 seconds
    $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.016763 seconds
    send time: 2.016062 seconds
    $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 1.007239 seconds
    send time: 1.023890 seconds

Results after patch:

    $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.010062 seconds
    send time: 2.015836 seconds
    $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.013974 seconds
    send time: 2.015981 seconds
    $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.030257 seconds
    send time: 2.013383 seconds

#include <stdio.h>
#include <stdlib.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <sys/time.h>

void checkrc(char *str, int rc)

 {
         if (rc >= 0)
                 return;

         perror(str);
         exit(1);

}

static char buf[1024];
int main(int argc, char **argv)

 {
         int rc;
         int socks[2];
         struct timeval tv;
         struct timeval start, end, delta;

         rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
         checkrc("socketpair", rc);

         /* set timeout to 1.999999 seconds */
         tv.tv_sec = 1;
         tv.tv_usec = 999999;
         rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv);
         rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv);
         checkrc("setsockopt", rc);

         /* measure actual receive timeout */
         gettimeofday(&start, NULL);
         rc = recv(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("recv time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);

         /* fill send buffer */
         do {
                 rc = send(socks[0], buf, sizeof buf, 0);
         } while (rc > 0);

         /* measure actual send timeout */
         gettimeofday(&start, NULL);
         rc = send(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("send time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);
         exit(0);

}

Fixes 515c7af85ed9 ("x32: Use compat shims for {g,s}etsockopt")
---
 net/compat.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
net/compat.c +4 -2
@@ -372,7 +372,8 @@ static int compat_sock_setsockopt(struct
 	    optname == SO_ATTACH_REUSEPORT_CBPF)
 		return do_set_attach_filter(sock, level, optname,
 					    optval, optlen);
-	if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
+	if (!COMPAT_USE_64BIT_TIME &&
+	    (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO))
 		return do_set_sock_timeout(sock, level, optname, optval, optlen);
 
 	return sock_setsockopt(sock, level, optname, optval, optlen);
@@ -437,7 +438,8 @@ static int do_get_sock_timeout(struct so
 static int compat_sock_getsockopt(struct socket *sock, int level, int optname,
 				char __user *optval, int __user *optlen)
 {
-	if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
+	if (!COMPAT_USE_64BIT_TIME &&
+	    (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO))
 		return do_get_sock_timeout(sock, level, optname, optval, optlen);
 	return sock_getsockopt(sock, level, optname, optval, optlen);
 }
author maintainer
#12 lore raw

PATCH 12/33 openvswitch: Dont swap table in nlattr_set() after OVS_ATTR_NESTED is found

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <[email protected]>

[ Upstream commit 72f17baf2352ded6a1d3f4bb2d15da8c678cd2cb ]

If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one.

However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes.

For example, given this sequence:

1 OVS_KEY_ATTR_PRIORITY
2 OVS_KEY_ATTR_TUNNEL
3 OVS_TUNNEL_KEY_ATTR_ID
4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC
5 OVS_TUNNEL_KEY_ATTR_IPV4_DST
6 OVS_TUNNEL_KEY_ATTR_TTL
7 OVS_TUNNEL_KEY_ATTR_TP_SRC
8 OVS_TUNNEL_KEY_ATTR_TP_DST
9 OVS_KEY_ATTR_IN_PORT
10 OVS_KEY_ATTR_SKB_MARK
11 OVS_KEY_ATTR_MPLS

we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table:

[ 7654.586496] ==================================================================
[ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430
[ 7654.610983]
[ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1
[ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[ 7654.631379] Call Trace:
[ 7654.634108]  [<ffffffffb65a7c50>] dump_stack+0x19/0x1b
[ 7654.639843]  [<ffffffffb53ff373>] print_address_description+0x33/0x290
[ 7654.647129]  [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.654607]  [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330
[ 7654.661406]  [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40
[ 7654.668789]  [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.676076]  [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch]
[ 7654.684234]  [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40
[ 7654.689968]  [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590
[ 7654.696574]  [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch]
[ 7654.705122]  [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0
[ 7654.712503]  [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21
[ 7654.719401]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.726298]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.733195]  [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50
[ 7654.740187]  [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0
[ 7654.746406]  [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20
[ 7654.752914]  [<ffffffffb53fe711>] ? memset+0x31/0x40
[ 7654.758456]  [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch]

[snip]

[ 7655.132484] The buggy address belongs to the variable:
[ 7655.138226]  ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch]
[ 7655.145507]
[ 7655.147166] Memory state around the buggy address:
[ 7655.152514]  ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa
[ 7655.160585]  ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa
[ 7655.176701]                                                              ^
[ 7655.184372]  ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05
[ 7655.192431]  ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.200490] ==================================================================
Fixes 982b52700482 ("openvswitch: Fix mask generation for nested attributes.")
---
 net/openvswitch/flow_netlink.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
net/openvswitch/flow_netlink.c +3 -6
@@ -1296,13 +1296,10 @@ static void nlattr_set(struct nlattr *at
 
 	/* The nlattr stream should already have been validated */
 	nla_for_each_nested(nla, attr, rem) {
-		if (tbl[nla_type(nla)].len == OVS_ATTR_NESTED) {
-			if (tbl[nla_type(nla)].next)
-				tbl = tbl[nla_type(nla)].next;
-			nlattr_set(nla, val, tbl);
-		} else {
+		if (tbl[nla_type(nla)].len == OVS_ATTR_NESTED)
+			nlattr_set(nla, val, tbl[nla_type(nla)].next ? : tbl);
+		else
 			memset(nla_data(nla), val, nla_len(nla));
-		}
 
 		if (nla_type(nla) == OVS_KEY_ATTR_CT_STATE)
 			*(u32 *)nla_data(nla) &= CT_SUPPORTED_MASK;
author maintainer
#13 lore raw

PATCH 13/33 qmi_wwan: do not steal interfaces from class drivers

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Bj�rn Mork" <[email protected]>

[ Upstream commit 5697db4a696c41601a1d15c1922150b4dbf5726c ]

The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that the { vendorid, productid, interfacenumber } set uniquely identifies one specific function. This has proven to fail for some configurable devices. One example is the Quectel EM06/EP06 where the same interface number can be either QMI or MBIM, without the device ID changing either.

Fix by requiring the vendor-specific class for interface number based matching. Functions of other classes can and should use class based matching instead.

Fixes 03304bcb5ec4 ("net: qmi_wwan: use fixed interface number matching")
---
 drivers/net/usb/qmi_wwan.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/net/usb/qmi_wwan.c +12 -0
@@ -1039,6 +1039,18 @@ static int qmi_wwan_probe(struct usb_int
 		id->driver_info = (unsigned long)&qmi_wwan_info;
 	}
 
+	/* There are devices where the same interface number can be
+	 * configured as different functions. We should only bind to
+	 * vendor specific functions when matching on interface number
+	 */
+	if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER &&
+	    desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) {
+		dev_dbg(&intf->dev,
+			"Rejecting interface number match for class %02x\n",
+			desc->bInterfaceClass);
+		return -ENODEV;
+	}
+
 	/* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
 	if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
 		dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
author maintainer
#14 lore raw

PATCH 14/33 r8169: fix powering up RTL8168h

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <[email protected]>

[ Upstream commit 3148dedfe79e422f448a10250d3e2cdf8b7ee617 ]

Since commit a92a08499b1f "r8169: improve runtime pm in general and suspend unused ports" interfaces w/o link are runtime-suspended after 10s. On systems where drivers take longer to load this can lead to the situation that the interface is runtime-suspended already when it's initially brought up.
This shouldn't be a problem because rtl_open() resumes MAC/PHY. However with at least one chip version the interface doesn't properly come up, as reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199549

The vendor driver uses a delay to give certain chip versions some time to resume before starting the PHY configuration. So let's do the same. I don't know which chip versions may be affected, therefore apply this delay always.

This patch was reported to fix the issue for RTL8168h. I was able to reproduce the issue on an Asus H310I-Plus which also uses a RTL8168h. Also in my case the patch fixed the issue.

---
 drivers/net/ethernet/realtek/r8169.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/net/ethernet/realtek/r8169.c +3 -0
@@ -4861,6 +4861,9 @@ static void rtl_pll_power_down(struct rt
 static void rtl_pll_power_up(struct rtl8169_private *tp)
 {
 	rtl_generic_op(tp, tp->pll_power_ops.up);
+
+	/* give MAC/PHY some time to resume */
+	msleep(20);
 }
 
 static void rtl_init_pll_power_ops(struct rtl8169_private *tp)
author maintainer
#15 lore raw

PATCH 15/33 sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addr

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit d625329b06e46bd20baf9ee40847d11982569204 ]

Since sctp ipv6 socket also supports v4 addrs, it's possible to compare two v4 addrs in pf v6 .cmp_addr, sctp_inet6_cmp_addr.

However after Commit 1071ec9d453a ("sctp: do not check port in sctp_inet6_cmp_addr"), it no longer calls af1->cmp_addr, which in this case is sctp_v4_cmp_addr, but calls __sctp_v6_cmp_addr where it handles them as two v6 addrs. It would cause a out of bounds crash.

syzbot found this crash when trying to bind two v4 addrs to a v6 socket.

This patch fixes it by adding the process for two v4 addrs in sctp_inet6_cmp_addr.

Fixes 1071ec9d453a ("sctp: do not check port in sctp_inet6_cmp_addr")
Reported-by [email protected]
---
 net/sctp/ipv6.c |    3 +++
 1 file changed, 3 insertions(+)
net/sctp/ipv6.c +3 -0
@@ -864,6 +864,9 @@ static int sctp_inet6_cmp_addr(const uni
 	if (sctp_is_any(sk, addr1) || sctp_is_any(sk, addr2))
 		return 1;
 
+	if (addr1->sa.sa_family == AF_INET && addr2->sa.sa_family == AF_INET)
+		return addr1->v4.sin_addr.s_addr == addr2->v4.sin_addr.s_addr;
+
 	return __sctp_v6_cmp_addr(addr1, addr2);
 }
 
author maintainer
#16 lore raw

PATCH 16/33 sctp: remove sctp_chunk_put from fail_mark err path in sctp_ulpevent_make_rcvmsg

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 6910e25de2257e2c82c7a2d126e3463cd8e50810 ]

In Commit 1f45f78f8e51 ("sctp: allow GSO frags to access the chunk too"), it held the chunk in sctp_ulpevent_make_rcvmsg to access it safely later in recvmsg. However, it also added sctp_chunk_put in fail_mark err path, which is only triggered before holding the chunk.

syzbot reported a use-after-free crash happened on this err path, where it shouldn't call sctp_chunk_put.

This patch simply removes this call.

Fixes 1f45f78f8e51 ("sctp: allow GSO frags to access the chunk too")
Reported-by [email protected]
---
 net/sctp/ulpevent.c |    1 -
 1 file changed, 1 deletion(-)
net/sctp/ulpevent.c +0 -1
@@ -723,7 +723,6 @@ struct sctp_ulpevent *sctp_ulpevent_make
 	return event;
 
 fail_mark:
-	sctp_chunk_put(chunk);
 	kfree_skb(skb);
 fail:
 	return NULL;
author maintainer
#17 lore raw

PATCH 17/33 sctp: use the old asoc when making the cookie-ack chunk in dupcook_d

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 46e16d4b956867013e0bbd7f2bad206f4aa55752 ]

When processing a duplicate cookie-echo chunk, for case 'D', sctp will not process the param from this chunk. It means old asoc has nothing to be updated, and the new temp asoc doesn't have the complete info.

So there's no reason to use the new asoc when creating the cookie-ack chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk can not be set with auth, and it will definitely be dropped by peer.

This issue is there since very beginning, and we fix it by using the old asoc instead.

---
 net/sctp/sm_statefuns.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sctp/sm_statefuns.c +1 -1
@@ -1959,7 +1959,7 @@ static sctp_disposition_t sctp_sf_do_dup
 		}
 	}
 
-	repl = sctp_make_cookie_ack(new_asoc, chunk);
+	repl = sctp_make_cookie_ack(asoc, chunk);
 	if (!repl)
 		goto nomem;
 
author maintainer
#18 lore raw

PATCH 18/33 tcp_bbr: fix to zero idle_restart only upon S/ACKed data

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Neal Cardwell <[email protected]>

[ Upstream commit e6e6a278b1eaffa19d42186bfacd1ffc15a50b3f ]

Previously the bbr->idle_restart tracking was zeroing out the bbr->idle_restart bit upon ACKs that did not SACK or ACK anything, e.g. receiving incoming data or receiver window updates. In such situations BBR would forget that this was a restart-from-idle situation, and if the min_rtt had expired it would unnecessarily enter PROBE_RTT (even though we were actually restarting from idle but had merely forgotten that fact).

The fix is simple: we need to remember we are restarting from idle until we receive a S/ACK for some data (a S/ACK for the first flight of data we send as we are restarting).

This commit is a stable candidate for kernels back as far as 4.9.

---
 net/ipv4/tcp_bbr.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/ipv4/tcp_bbr.c +3 -1
@@ -773,7 +773,9 @@ static void bbr_update_min_rtt(struct so
 			}
 		}
 	}
-	bbr->idle_restart = 0;
+	/* Restart after idle ends only once we process a new S/ACK for data */
+	if (rs->delivered > 0)
+		bbr->idle_restart = 0;
 }
 
 static void bbr_update_model(struct sock *sk, const struct rate_sample *rs)
author maintainer
#19 lore raw

PATCH 19/33 tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Chan <[email protected]>

[ Upstream commit d89a2adb8bfe6f8949ff389acdb9fa298b6e8e12 ]

tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats under spinlock and can trigger BUG_ON() in vunmap() because vunmap() may sleep. Fix it by removing the spinlock and relying on the TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between tg3_get_stats64() and tg3_free_consistent(). TG3_FLAG_INIT_COMPLETE is always cleared under tp->lock before tg3_free_consistent() and therefore tg3_get_stats64() can safely access tp->hw_stats under tp->lock if TG3_FLAG_INIT_COMPLETE is set.

Fixes f5992b72ebe0 ("tg3: Fix race condition in tg3_get_stats64().")
---
 drivers/net/ethernet/broadcom/tg3.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/net/ethernet/broadcom/tg3.c +5 -4
@@ -8720,14 +8720,15 @@ static void tg3_free_consistent(struct t
 	tg3_mem_rx_release(tp);
 	tg3_mem_tx_release(tp);
 
-	/* Protect tg3_get_stats64() from reading freed tp->hw_stats. */
-	tg3_full_lock(tp, 0);
+	/* tp->hw_stats can be referenced safely:
+	 *     1. under rtnl_lock
+	 *     2. or under tp->lock if TG3_FLAG_INIT_COMPLETE is set.
+	 */
 	if (tp->hw_stats) {
 		dma_free_coherent(&tp->pdev->dev, sizeof(struct tg3_hw_stats),
 				  tp->hw_stats, tp->stats_mapping);
 		tp->hw_stats = NULL;
 	}
-	tg3_full_unlock(tp);
 }
 
 /*
@@ -14161,7 +14162,7 @@ static struct rtnl_link_stats64 *tg3_get
 	struct tg3 *tp = netdev_priv(dev);
 
 	spin_lock_bh(&tp->lock);
-	if (!tp->hw_stats) {
+	if (!tp->hw_stats || !tg3_flag(tp, INIT_COMPLETE)) {
 		*stats = tp->net_stats_prev;
 		spin_unlock_bh(&tp->lock);
 		return stats;
author maintainer
#20 lore raw

PATCH 20/33 bonding: do not allow rlb updates to invalid mac

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Debabrata Banerjee <[email protected]>

[ Upstream commit 4fa8667ca3989ce14cf66301fa251544fbddbdd0 ]

Make sure multicast, broadcast, and zero mac's cannot be the output of rlb updates, which should all be directed arps. Receive load balancing will be collapsed if any of these happen, as the switch will broadcast.

---
 drivers/net/bonding/bond_alb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_alb.c +1 -1
@@ -450,7 +450,7 @@ static void rlb_update_client(struct rlb
 {
 	int i;
 
-	if (!client_info->slave)
+	if (!client_info->slave || !is_valid_ether_addr(client_info->mac_dst))
 		return;
 
 	for (i = 0; i < RLB_ARP_BURST_SIZE; i++) {
author maintainer
#21 lore raw

PATCH 21/33 net/mlx5: Avoid cleaning flow steering table twice during error flow

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Talat Batheesh <[email protected]>

[ Upstream commit 9c26f5f89d01ca21560c6b8a8e4054c271cc3a9c ]

When we fail to initialize the RX root namespace, we need to clean only that and not the entire flow steering.

Currently the code may try to clean the flow steering twice on error witch leads to null pointer deference. Make sure we clean correctly.

Fixes fba53f7b5719 ("net/mlx5: Introduce mlx5_flow_steering structure")
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +13 -8
@@ -153,6 +153,7 @@ static void del_rule(struct fs_node *nod
 static void del_flow_table(struct fs_node *node);
 static void del_flow_group(struct fs_node *node);
 static void del_fte(struct fs_node *node);
+static void cleanup_root_ns(struct mlx5_flow_root_namespace *root_ns);
 
 static void tree_init_node(struct fs_node *node,
 			   unsigned int refcount,
@@ -1690,24 +1691,28 @@ static int create_anchor_flow_table(stru
 
 static int init_root_ns(struct mlx5_flow_steering *steering)
 {
+	int err;
 
 	steering->root_ns = create_root_ns(steering, FS_FT_NIC_RX);
 	if (!steering->root_ns)
-		goto cleanup;
+		return -ENOMEM;
 
-	if (init_root_tree(steering, &root_fs, &steering->root_ns->ns.node))
-		goto cleanup;
+	err = init_root_tree(steering, &root_fs, &steering->root_ns->ns.node);
+	if (err)
+		goto out_err;
 
 	set_prio_attrs(steering->root_ns);
 
-	if (create_anchor_flow_table(steering))
-		goto cleanup;
+	err = create_anchor_flow_table(steering);
+	if (err)
+		goto out_err;
 
 	return 0;
 
-cleanup:
-	mlx5_cleanup_fs(steering->dev);
-	return -ENOMEM;
+out_err:
+	cleanup_root_ns(steering->root_ns);
+	steering->root_ns = NULL;
+	return err;
 }
 
 static void clean_tree(struct fs_node *node)
author maintainer
#22 lore raw

PATCH 22/33 bonding: send learning packets for vlans on slave

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Debabrata Banerjee <[email protected]>

[ Upstream commit 21706ee8a47d3ede7fdae0be6d7c0a0e31a83229 ]

There was a regression at some point from the intended functionality of commit f60c3704e87d ("bonding: Fix alb mode to only use first level vlans.")

Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent.

In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan.

---
 drivers/net/bonding/bond_alb.c  |   13 ++++++++-----
 drivers/net/bonding/bond_main.c |    2 ++
 include/net/bonding.h           |    1 +
 3 files changed, 11 insertions(+), 5 deletions(-)
drivers/net/bonding/bond_alb.c +8 -5
@@ -944,6 +944,10 @@ static void alb_send_lp_vid(struct slave
 	skb->priority = TC_PRIO_CONTROL;
 	skb->dev = slave->dev;
 
+	netdev_dbg(slave->bond->dev,
+		   "Send learning packet: dev %s mac %pM vlan %d\n",
+		   slave->dev->name, mac_addr, vid);
+
 	if (vid)
 		__vlan_hwaccel_put_tag(skb, vlan_proto, vid);
 
@@ -966,14 +970,13 @@ static void alb_send_learning_packets(st
 	 */
 	rcu_read_lock();
 	netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) {
-		if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0) {
-			if (strict_match &&
-			    ether_addr_equal_64bits(mac_addr,
-						    upper->dev_addr)) {
+		if (is_vlan_dev(upper) &&
+		    bond->nest_level == vlan_get_encap_level(upper) - 1) {
+			if (upper->addr_assign_type == NET_ADDR_STOLEN) {
 				alb_send_lp_vid(slave, mac_addr,
 						vlan_dev_vlan_proto(upper),
 						vlan_dev_vlan_id(upper));
-			} else if (!strict_match) {
+			} else {
 				alb_send_lp_vid(slave, upper->dev_addr,
 						vlan_dev_vlan_proto(upper),
 						vlan_dev_vlan_id(upper));
drivers/net/bonding/bond_main.c +2 -0
@@ -1732,6 +1732,8 @@ int bond_enslave(struct net_device *bond
 	if (bond_mode_uses_xmit_hash(bond))
 		bond_update_slave_arr(bond, NULL);
 
+	bond->nest_level = dev_get_nest_level(bond_dev);
+
 	netdev_info(bond_dev, "Enslaving %s as %s interface with %s link\n",
 		    slave_dev->name,
 		    bond_is_active_slave(new_slave) ? "an active" : "a backup",
include/net/bonding.h +1 -0
@@ -197,6 +197,7 @@ struct bonding {
 	struct   slave __rcu *primary_slave;
 	struct   bond_up_slave __rcu *slave_arr; /* Array of usable slaves */
 	bool     force_primary;
+	u32      nest_level;
 	s32      slave_cnt; /* never change this value outside the attach/detach wrappers */
 	int     (*recv_probe)(const struct sk_buff *, struct bonding *,
 			      struct slave *);
author maintainer
#23 lore raw

PATCH 23/33 tcp: ignore Fast Open on repair mode

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <[email protected]>

[ Upstream commit 16ae6aa1705299789f71fdea59bfb119c1fbd9c0 ]

The TCP repair sequence of operation is to first set the socket in repair mode, then inject the TCP stats into the socket with repair socket options, then call connect() to re-activate the socket. The connect syscall simply returns and set state to ESTABLISHED mode. As a result Fast Open is meaningless for TCP repair.

However allowing sendto() system call with MSG_FASTOPEN flag half-way during the repair operation could unexpectedly cause data to be sent, before the operation finishes changing the internal TCP stats (e.g. MSS). This in turn triggers TCP warnings on inconsistent packet accounting.

The fix is to simply disallow Fast Open operation once the socket is in the repair mode.

---
 net/ipv4/tcp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/tcp.c +1 -1
@@ -1118,7 +1118,7 @@ int tcp_sendmsg(struct sock *sk, struct
 	lock_sock(sk);
 
 	flags = msg->msg_flags;
-	if (flags & MSG_FASTOPEN) {
+	if ((flags & MSG_FASTOPEN) && !tp->repair) {
 		err = tcp_sendmsg_fastopen(sk, msg, &copied_syn, size);
 		if (err == -EINPROGRESS && copied_syn > 0)
 			goto out;
author maintainer
#24 lore raw

PATCH 24/33 sctp: fix the issue that the cookie-ack with auth cant get processed

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit ce402f044e4e432c296f90eaabb8dbe8f3624391 ]

When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp processes auth chunk first, then continues to the next chunk in this packet if chunk_end + chunk_hdr size < skb_tail_pointer(). Otherwise, it will go to the next packet or discard this chunk.

However, it missed the fact that cookie-ack chunk's size is equal to chunk_hdr size, which couldn't match that check, and thus this chunk would not get processed.

This patch fixes it by changing the check to chunk_end + chunk_hdr size <= skb_tail_pointer().

Fixes 26b87c788100 ("net: sctp: fix remote memory pressure from excessive queueing")
---
 net/sctp/inqueue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sctp/inqueue.c +1 -1
@@ -217,7 +217,7 @@ new_skb:
 	skb_pull(chunk->skb, sizeof(sctp_chunkhdr_t));
 	chunk->subh.v = NULL; /* Subheader is no longer valid.  */
 
-	if (chunk->chunk_end + sizeof(sctp_chunkhdr_t) <
+	if (chunk->chunk_end + sizeof(sctp_chunkhdr_t) <=
 	    skb_tail_pointer(chunk->skb)) {
 		/* This is not a singleton */
 		chunk->singleton = 0;
author maintainer
#25 lore raw

PATCH 25/33 sctp: delay the authentication for the duplicated cookie-echo chunk

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 59d8d4434f429b4fa8a346fd889058bda427a837 ]

Now sctp only delays the authentication for the normal cookie-echo chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does authentication first based on the old asoc, which will definitely fail due to the different auth info in the old asoc.

The duplicated cookie-echo chunk will create a new asoc with the auth info from this chunk, and the authentication should also be done with the new asoc's auth info for all of the collision 'A', 'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth will never pass the authentication and create the new connection.

This issue exists since very beginning, and this fix is to make sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does for the normal cookie-echo chunk to delay the authentication.

While at it, remove the unused params from sctp_sf_authenticate() and define sctp_auth_chunk_verify() used for all the places that do the delayed authentication.

v1->v2:
fix the typo in changelog as Marcelo noticed.

---
 net/sctp/associola.c    |   30 ++++++++++++++++
 net/sctp/sm_statefuns.c |   87 ++++++++++++++++++++++++++----------------------
 2 files changed, 77 insertions(+), 40 deletions(-)
net/sctp/associola.c +29 -1
@@ -1006,9 +1006,10 @@ static void sctp_assoc_bh_rcv(struct wor
 	struct sctp_endpoint *ep;
 	struct sctp_chunk *chunk;
 	struct sctp_inq *inqueue;
-	int state;
 	sctp_subtype_t subtype;
+	int first_time = 1;	/* is this the first time through the loop */
 	int error = 0;
+	int state;
 
 	/* The association should be held so we should be safe. */
 	ep = asoc->ep;
@@ -1019,6 +1020,30 @@ static void sctp_assoc_bh_rcv(struct wor
 		state = asoc->state;
 		subtype = SCTP_ST_CHUNK(chunk->chunk_hdr->type);
 
+		/* If the first chunk in the packet is AUTH, do special
+		 * processing specified in Section 6.3 of SCTP-AUTH spec
+		 */
+		if (first_time && subtype.chunk == SCTP_CID_AUTH) {
+			struct sctp_chunkhdr *next_hdr;
+
+			next_hdr = sctp_inq_peek(inqueue);
+			if (!next_hdr)
+				goto normal;
+
+			/* If the next chunk is COOKIE-ECHO, skip the AUTH
+			 * chunk while saving a pointer to it so we can do
+			 * Authentication later (during cookie-echo
+			 * processing).
+			 */
+			if (next_hdr->type == SCTP_CID_COOKIE_ECHO) {
+				chunk->auth_chunk = skb_clone(chunk->skb,
+							      GFP_ATOMIC);
+				chunk->auth = 1;
+				continue;
+			}
+		}
+
+normal:
 		/* SCTP-AUTH, Section 6.3:
 		 *    The receiver has a list of chunk types which it expects
 		 *    to be received only after an AUTH-chunk.  This list has
@@ -1057,6 +1082,9 @@ static void sctp_assoc_bh_rcv(struct wor
 		/* If there is an error on chunk, discard this packet. */
 		if (error && chunk)
 			chunk->pdiscard = 1;
+
+		if (first_time)
+			first_time = 0;
 	}
 	sctp_association_put(asoc);
 }
net/sctp/sm_statefuns.c +48 -39

142 lines not on this page · raw message

author maintainer
#26 lore raw

PATCH 26/33 serial: sccnxp: Fix error handling in sccnxp_probe()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <[email protected]>

commit c91261437985d481c472639d4397931d77f5d4e9 upstream.

sccnxp_probe() returns result of regulator_disable() that may lead to returning zero, while device is not properly initialized. Also the driver enables clocks, but it does not disable it.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/tty/serial/sccnxp.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/tty/serial/sccnxp.c +11 -2
@@ -889,7 +889,16 @@ static int sccnxp_probe(struct platform_
 			goto err_out;
 		uartclk = 0;
 	} else {
-		clk_prepare_enable(clk);
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			goto err_out;
+
+		ret = devm_add_action_or_reset(&pdev->dev,
+				(void(*)(void *))clk_disable_unprepare,
+				clk);
+		if (ret)
+			goto err_out;
+
 		uartclk = clk_get_rate(clk);
 	}
 
@@ -988,7 +997,7 @@ static int sccnxp_probe(struct platform_
 	uart_unregister_driver(&s->uart);
 err_out:
 	if (!IS_ERR(s->regulator))
-		return regulator_disable(s->regulator);
+		regulator_disable(s->regulator);
 
 	return ret;
 }
author maintainer
#27 lore raw

PATCH 27/33 futex: Remove duplicated code and fix undefined behaviour

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream.

There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result.

Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway).

Cc Rich Felker <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Max Filippov <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Jonas Bonn <[email protected]>
Cc Yoshinori Sato <[email protected]>
Cc Helge Deller <[email protected]>
Cc "James E.J. Bottomley" <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc Matt Turner <[email protected]>
Cc Fenghua Yu <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Stefan Kristiansson <[email protected]>
Cc Ivan Kokshaysky <[email protected]>
Cc Stafford Horne <[email protected]>
Cc Richard Henderson <[email protected]>
Cc Chris Zankel <[email protected]>
Cc Michal Simek <[email protected]>
Cc Tony Luck <[email protected]>
Cc Vineet Gupta <[email protected]>
Cc Ralf Baechle <[email protected]>
Cc Richard Kuo <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Ben Hutchings <[email protected]>
---
 arch/alpha/include/asm/futex.h      |   26 +++---------------
 arch/arc/include/asm/futex.h        |   40 +++-------------------------
 arch/arm/include/asm/futex.h        |   26 ++----------------
 arch/arm64/include/asm/futex.h      |   27 ++-----------------
 arch/frv/include/asm/futex.h        |    3 +-
 arch/frv/kernel/futex.c             |   27 ++-----------------
 arch/hexagon/include/asm/futex.h    |   38 ++-------------------------
 arch/ia64/include/asm/futex.h       |   25 ++----------------
 arch/microblaze/include/asm/futex.h |   38 ++-------------------------
 arch/mips/include/asm/futex.h       |   25 ++----------------
 arch/parisc/include/asm/futex.h     |   26 ++----------------
 arch/powerpc/include/asm/futex.h    |   26 +++---------------
 arch/s390/include/asm/futex.h       |   23 +++-------------
 arch/sh/include/asm/futex.h         |   26 ++----------------
 arch/sparc/include/asm/futex_64.h   |   26 +++---------------
 arch/tile/include/asm/futex.h       |   40 +++-------------------------
 arch/x86/include/asm/futex.h        |   40 +++-------------------------
 arch/xtensa/include/asm/futex.h     |   27 +++----------------
 include/asm-generic/futex.h         |   50 ++++++------------------------------
 kernel/futex.c                      |   39 ++++++++++++++++++++++++++++
 20 files changed, 126 insertions(+), 472 deletions(-)
arch/alpha/include/asm/futex.h +5 -21
@@ -29,18 +29,10 @@
 	:	"r" (uaddr), "r"(oparg)				\
 	:	"memory")
 
-static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -66,17 +58,9 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/arc/include/asm/futex.h +5 -35
@@ -73,20 +73,11 @@
 
 #endif
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
 #ifndef CONFIG_ARC_HAS_LLSC
 	preempt_disable();	/* to guarantee atomic r-m-w of futex op */
 #endif
@@ -118,30 +109,9 @@ static inline int futex_atomic_op_inuser
 	preempt_enable();
 #endif
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/arm/include/asm/futex.h +4 -22
@@ -128,20 +128,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
 #endif /* !SMP */
 
 static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret, tmp;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
 #ifndef CONFIG_SMP
 	preempt_disable();
 #endif
@@ -172,17 +162,9 @@ futex_atomic_op_inuser (int encoded_op,
 	preempt_enable();
 #endif
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/arm64/include/asm/futex.h +4 -23
@@ -51,20 +51,9 @@
 	: "memory")
 
 static inline int
-futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *_uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (int)(encoded_op << 8) >> 20;
-	int cmparg = (int)(encoded_op << 20) >> 20;
 	int oldval = 0, ret, tmp;
-	u32 __user *uaddr = __uaccess_mask_ptr(_uaddr);
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1U << (oparg & 0x1f);
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -95,17 +84,9 @@ futex_atomic_op_inuser(unsigned int enco
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/frv/include/asm/futex.h +2 -1
@@ -7,7 +7,8 @@
 #include <asm/errno.h>
 #include <asm/uaccess.h>
 
-extern int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr);
+extern int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr);
 
 static inline int
 futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
arch/frv/kernel/futex.c +4 -23
@@ -186,20 +186,10 @@ static inline int atomic_futex_op_xchg_x
 /*
  * do the futex operations
  */
-int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+int arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
 	pagefault_disable();
 
 	switch (op) {
@@ -225,18 +215,9 @@ int futex_atomic_op_inuser(int encoded_o
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS; break;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
 
 	return ret;
 
-} /* end futex_atomic_op_inuser() */
+} /* end arch_futex_atomic_op_inuser() */
arch/hexagon/include/asm/futex.h +4 -34
@@ -31,18 +31,9 @@
 
 
 static inline int
-futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -72,30 +63,9 @@ futex_atomic_op_inuser(int encoded_op, i
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/ia64/include/asm/futex.h +4 -21
@@ -45,18 +45,9 @@ do {									\
 } while (0)
 
 static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -84,17 +75,9 @@ futex_atomic_op_inuser (int encoded_op,
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/microblaze/include/asm/futex.h +4 -34
@@ -29,18 +29,9 @@
 })
 
 static inline int
-futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -66,30 +57,9 @@ futex_atomic_op_inuser(int encoded_op, u
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/mips/include/asm/futex.h +4 -21
@@ -83,18 +83,9 @@
 }
 
 static inline int
-futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -125,17 +116,9 @@ futex_atomic_op_inuser(int encoded_op, u
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/parisc/include/asm/futex.h +4 -22
@@ -32,22 +32,12 @@ _futex_spin_unlock_irqrestore(u32 __user
 }
 
 static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
 	unsigned long int flags;
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval, ret;
 	u32 tmp;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr)))
-		return -EFAULT;
-
 	_futex_spin_lock_irqsave(uaddr, &flags);
 	pagefault_disable();
 
@@ -85,17 +75,9 @@ out_pagefault_enable:
 	pagefault_enable();
 	_futex_spin_unlock_irqrestore(uaddr, &flags);
 
-	if (ret == 0) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/powerpc/include/asm/futex.h +5 -21
@@ -31,18 +31,10 @@
 	: "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
 	: "cr0", "memory")
 
-static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -68,17 +60,9 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/s390/include/asm/futex.h +5 -18
@@ -21,17 +21,12 @@
 		: "0" (-EFAULT), "d" (oparg), "a" (uaddr),		\
 		  "m" (*uaddr) : "cc");
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, newval, ret;
 
 	load_kernel_asce();
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
 
 	pagefault_disable();
 	switch (op) {
@@ -60,17 +55,9 @@ static inline int futex_atomic_op_inuser
 	}
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/sh/include/asm/futex.h +4 -22
@@ -27,21 +27,12 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
 	return atomic_futex_op_cmpxchg_inatomic(uval, uaddr, oldval, newval);
 }
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	u32 oparg = (encoded_op << 8) >> 20;
-	u32 cmparg = (encoded_op << 20) >> 20;
 	u32 oldval, newval, prev;
 	int ret;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
 	pagefault_disable();
 
 	do {
@@ -80,17 +71,8 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = ((int)oldval < (int)cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = ((int)oldval >= (int)cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = ((int)oldval <= (int)cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = ((int)oldval > (int)cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
 
 	return ret;
 }
arch/sparc/include/asm/futex_64.h +5 -21
@@ -29,22 +29,14 @@
 	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)	\
 	: "memory")
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret, tem;
 
-	if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
-		return -EFAULT;
 	if (unlikely((((unsigned long) uaddr) & 0x3UL)))
 		return -EINVAL;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
 	pagefault_disable();
 
 	switch (op) {
@@ -69,17 +61,9 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/tile/include/asm/futex.h +5 -35
@@ -106,12 +106,9 @@
 	lock = __atomic_hashed_lock((int __force *)uaddr)
 #endif
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int uninitialized_var(val), ret;
 
 	__futex_prolog();
@@ -119,12 +116,6 @@ static inline int futex_atomic_op_inuser
 	/* The 32-bit futex code makes this assumption, so validate it here. */
 	BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int));
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
 	pagefault_disable();
 	switch (op) {
 	case FUTEX_OP_SET:
@@ -148,30 +139,9 @@ static inline int futex_atomic_op_inuser
 	}
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (val == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (val != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (val < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (val >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (val <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (val > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = val;
+
 	return ret;
 }
 
arch/x86/include/asm/futex.h +5 -35
@@ -41,20 +41,11 @@
 		       "+m" (*uaddr), "=&r" (tem)		\
 		     : "r" (oparg), "i" (-EFAULT), "1" (0))
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret, tem;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
 	pagefault_disable();
 
 	switch (op) {
@@ -80,30 +71,9 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
arch/xtensa/include/asm/futex.h +5 -22
@@ -44,18 +44,10 @@
 	: "r" (uaddr), "I" (-EFAULT), "r" (oparg)	\
 	: "memory")
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 #if !XCHAL_HAVE_S32C1I
 	return -ENOSYS;
@@ -89,19 +81,10 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (ret)
-		return ret;
-
-	switch (cmp) {
-	case FUTEX_OP_CMP_EQ: return (oldval == cmparg);
-	case FUTEX_OP_CMP_NE: return (oldval != cmparg);
-	case FUTEX_OP_CMP_LT: return (oldval < cmparg);
-	case FUTEX_OP_CMP_GE: return (oldval >= cmparg);
-	case FUTEX_OP_CMP_LE: return (oldval <= cmparg);
-	case FUTEX_OP_CMP_GT: return (oldval > cmparg);
-	}
+	if (!ret)
+		*oval = oldval;
 
-	return -ENOSYS;
+	return ret;
 }
 
 static inline int
include/asm-generic/futex.h +9 -41

86 lines not on this page · raw message

kernel/futex.c +39 -0
@@ -1458,6 +1458,45 @@ out:
 	return ret;
 }
 
+static int futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr)
+{
+	unsigned int op =	  (encoded_op & 0x70000000) >> 28;
+	unsigned int cmp =	  (encoded_op & 0x0f000000) >> 24;
+	int oparg = sign_extend32((encoded_op & 0x00fff000) >> 12, 12);
+	int cmparg = sign_extend32(encoded_op & 0x00000fff, 12);
+	int oldval, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) {
+		if (oparg < 0 || oparg > 31)
+			return -EINVAL;
+		oparg = 1 << oparg;
+	}
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	ret = arch_futex_atomic_op_inuser(op, oparg, &oldval, uaddr);
+	if (ret)
+		return ret;
+
+	switch (cmp) {
+	case FUTEX_OP_CMP_EQ:
+		return oldval == cmparg;
+	case FUTEX_OP_CMP_NE:
+		return oldval != cmparg;
+	case FUTEX_OP_CMP_LT:
+		return oldval < cmparg;
+	case FUTEX_OP_CMP_GE:
+		return oldval >= cmparg;
+	case FUTEX_OP_CMP_LE:
+		return oldval <= cmparg;
+	case FUTEX_OP_CMP_GT:
+		return oldval > cmparg;
+	default:
+		return -ENOSYS;
+	}
+}
+
 /*
  * Wake up all waiters hashed on the physical page that is mapped
  * to this virtual address:
#28 lore raw

Re: [PATCH 4.9 27/33] futex: Remove duplicated code and fix undefined behaviour

Quoted 7 lines · Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream.

...

kernel/futex.c out: · line 1466

Quoted 12 lines
kernel/futex.c +6 -0
@@ -1458,6 +1458,45 @@ out:
 	return ret;
 }
 
+static int futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr)
+{
+	unsigned int op =	  (encoded_op & 0x70000000) >> 28;
+	unsigned int cmp =	  (encoded_op & 0x0f000000) >> 24;
+	int oparg = sign_extend32((encoded_op & 0x00fff000) >> 12, 12);
+	int cmparg = sign_extend32(encoded_op & 0x00000fff, 12);

12 is wrong here – wherever you apply this, you need also a follow-up fix:
commit d70ef22892ed6c066e51e118b225923c9b74af34

Author: Jiri Slaby <[email protected]>
Date:   Thu Nov 30 15:35:44 2017 +0100

futex: futex_wake_op, fix sign_extend32 sign bits

thanks,

Signature · 2 lines
js
suse labs
author maintainer
#29 lore raw

Re: [PATCH 4.9 27/33] futex: Remove duplicated code and fix undefined behaviour

Quoted 24 lines · Jiri Slaby
Quoted 7 lines · Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream.

...

kernel/futex.c out: · line 1466

Quoted 12 lines
kernel/futex.c +6 -0
@@ -1458,6 +1458,45 @@ out:
 	return ret;
 }
 
+static int futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr)
+{
+	unsigned int op =	  (encoded_op & 0x70000000) >> 28;
+	unsigned int cmp =	  (encoded_op & 0x0f000000) >> 24;
+	int oparg = sign_extend32((encoded_op & 0x00fff000) >> 12, 12);
+	int cmparg = sign_extend32(encoded_op & 0x00000fff, 12);

12 is wrong here – wherever you apply this, you need also a follow-up fix:
commit d70ef22892ed6c066e51e118b225923c9b74af34

Quoted 4 lines
Author: Jiri Slaby <[email protected]>
Date:   Thu Nov 30 15:35:44 2017 +0100

futex: futex_wake_op, fix sign_extend32 sign bits

Thanks for letting me know, I've now queued it up to the needed trees.

greg k-h

author maintainer
#30 lore raw

PATCH 28/33 xfrm: fix xfrm_do_migrate() with AEAD e.g(AES-GCM)

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Antony Antony <[email protected]>

commit 75bf50f4aaa1c78d769d854ab3d975884909e4fb upstream.

copy geniv when cloning the xfrm state.

x->geniv was not copied to the new state and migration would fail.

xfrm_do_migrate
..
xfrm_state_clone()
..
..
esp_init_aead()
crypto_alloc_aead()
crypto_alloc_tfm()
crypto_find_alg() return EAGAIN and failed

---
 net/xfrm/xfrm_state.c |    1 +
 1 file changed, 1 insertion(+)
net/xfrm/xfrm_state.c +1 -0
@@ -1197,6 +1197,7 @@ static struct xfrm_state *xfrm_state_clo
 
 	if (orig->aead) {
 		x->aead = xfrm_algo_aead_clone(orig->aead);
+		x->geniv = orig->geniv;
 		if (!x->aead)
 			goto error;
 	}
author maintainer
#31 lore raw

PATCH 29/33 lockd: lost rollback of set_grace_period() in lockd_down_net()

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vasily Averin <[email protected]>

commit 3a2b19d1ee5633f76ae8a88da7bc039a5d1732aa upstream.

Commit efda760fe95ea ("lockd: fix lockd shutdown race") is incorrect, it removes lockd_manager and disarm grace_period_end for init_net only.

If nfsd was started from another net namespace lockd_up_net() calls set_grace_period() that adds lockd_manager into per-netns list and queues grace_period_end delayed work.

These action should be reverted in lockd_down_net().
Otherwise it can lead to double list_add on after restart nfsd in netns, and to use-after-free if non-disarmed delayed work will be executed after netns destroy.

Fixes efda760fe95e ("lockd: fix lockd shutdown race")
Cc Ben Hutchings <[email protected]>
---
 fs/lockd/svc.c |    2 ++
 1 file changed, 2 insertions(+)
fs/lockd/svc.c +2 -0
@@ -274,6 +274,8 @@ static void lockd_down_net(struct svc_se
 	if (ln->nlmsvc_users) {
 		if (--ln->nlmsvc_users == 0) {
 			nlm_shutdown_hosts_net(net);
+			cancel_delayed_work_sync(&ln->grace_period_end);
+			locks_end_grace(&ln->lockd_manager);
 			svc_shutdown_net(serv, net);
 			dprintk("lockd_down_net: per-net data destroyed; net=%p\n", net);
 		}
author maintainer
#32 lore raw

PATCH 30/33 Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

This reverts commit c53c4ad96242e868da492f424535bf4b45f80503 which was commit 79935915300c5eb88a0e94fa9148a7505c14a02a upstream.

As Ben points out:
This depends on:

commit 570c70a60f53ca737ead4e5966c446bf0d39fac9
Author: Fabio Estevam <[email protected]>
Date: Wed Apr 5 11:32:34 2017 -0300

ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed

which did not show up until 4.13, so this makes no sense to have in this stable branch.

---
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi |    1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6qdl-wandboard.dtsi +0 -1
@@ -88,7 +88,6 @@
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
 	};
 };
 
author maintainer
#33 lore raw

PATCH 31/33 l2tp: revert "l2tp: fix missing print session offset info"

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Chapman <[email protected]>

commit de3b58bc359a861d5132300f53f95e83f71954b3 upstream.

Revert commit 820da5357572 ("l2tp: fix missing print session offset info"). The peer_offset parameter is removed.

---
 net/l2tp/l2tp_netlink.c |    2 --
 1 file changed, 2 deletions(-)
net/l2tp/l2tp_netlink.c +0 -2
@@ -750,8 +750,6 @@ static int l2tp_nl_session_send(struct s
 
 	if ((session->ifname[0] &&
 	     nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) ||
-	    (session->offset &&
-	     nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset)) ||
 	    (session->cookie_len &&
 	     nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len,
 		     &session->cookie[0])) ||
author maintainer
#34 lore raw

PATCH 32/33 nfp: TX time stamp packets before HW doorbell is rung

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jakub Kicinski <[email protected]>

commit 46f1c52e66dbc0d7a99f7c2a3c9debb497fe7b7b upstream.

TX completion may happen any time after HW queue was kicked. We can't access the skb afterwards. Move the time stamping before ringing the doorbell.

Fixes 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Cc Willy Tarreau <[email protected]>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_common.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/netronome/nfp/nfp_net_common.c +2 -2
@@ -854,6 +854,8 @@ static int nfp_net_tx(struct sk_buff *sk
 
 	netdev_tx_sent_queue(nd_q, txbuf->real_len);
 
+	skb_tx_timestamp(skb);
+
 	tx_ring->wr_p += nr_frags + 1;
 	if (nfp_net_tx_ring_should_stop(tx_ring))
 		nfp_net_tx_ring_stop(nd_q, tx_ring);
@@ -866,8 +868,6 @@ static int nfp_net_tx(struct sk_buff *sk
 		tx_ring->wr_ptr_add = 0;
 	}
 
-	skb_tx_timestamp(skb);
-
 	return NETDEV_TX_OK;
 
 err_unmap:
author maintainer
#35 lore raw

PATCH 33/33 proc: do not access cmdline nor environ from file-backed areas

In reply to Greg Kroah-Hartman

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Willy Tarreau <[email protected]>

commit 7f7ccc2ccc2e70c6054685f5e3522efa81556830 upstream.

proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond.

Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though.

This was assigned CVE-2018-1120.

Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument.

---
 fs/proc/base.c     |   10 +++++-----
 include/linux/mm.h |    1 +
 mm/gup.c           |    3 +++
 3 files changed, 9 insertions(+), 5 deletions(-)
fs/proc/base.c +5 -5
@@ -252,7 +252,7 @@ static ssize_t proc_pid_cmdline_read(str
 	 * Inherently racy -- command line shares address space
 	 * with code and data.
 	 */
-	rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0);
+	rv = access_remote_vm(mm, arg_end - 1, &c, 1, FOLL_ANON);
 	if (rv <= 0)
 		goto out_free_page;
 
@@ -270,7 +270,7 @@ static ssize_t proc_pid_cmdline_read(str
 			int nr_read;
 
 			_count = min3(count, len, PAGE_SIZE);
-			nr_read = access_remote_vm(mm, p, page, _count, 0);
+			nr_read = access_remote_vm(mm, p, page, _count, FOLL_ANON);
 			if (nr_read < 0)
 				rv = nr_read;
 			if (nr_read <= 0)
@@ -305,7 +305,7 @@ static ssize_t proc_pid_cmdline_read(str
 			bool final;
 
 			_count = min3(count, len, PAGE_SIZE);
-			nr_read = access_remote_vm(mm, p, page, _count, 0);
+			nr_read = access_remote_vm(mm, p, page, _count, FOLL_ANON);
 			if (nr_read < 0)
 				rv = nr_read;
 			if (nr_read <= 0)
@@ -354,7 +354,7 @@ skip_argv:
 			bool final;
 
 			_count = min3(count, len, PAGE_SIZE);
-			nr_read = access_remote_vm(mm, p, page, _count, 0);
+			nr_read = access_remote_vm(mm, p, page, _count, FOLL_ANON);
 			if (nr_read < 0)
 				rv = nr_read;
 			if (nr_read <= 0)
@@ -970,7 +970,7 @@ static ssize_t environ_read(struct file
 		max_len = min_t(size_t, PAGE_SIZE, count);
 		this_len = min(max_len, this_len);
 
-		retval = access_remote_vm(mm, (env_start + src), page, this_len, 0);
+		retval = access_remote_vm(mm, (env_start + src), page, this_len, FOLL_ANON);
 
 		if (retval <= 0) {
 			ret = retval;
include/linux/mm.h +1 -0
@@ -2246,6 +2246,7 @@ static inline struct page *follow_page(s
 #define FOLL_MLOCK	0x1000	/* lock present pages */
 #define FOLL_REMOTE	0x2000	/* we are working on non-current tsk/mm */
 #define FOLL_COW	0x4000	/* internal GUP flag */
+#define FOLL_ANON	0x8000	/* don't do file mappings */
 
 typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr,
 			void *data);
mm/gup.c +3 -0
@@ -430,6 +430,9 @@ static int check_vma_flags(struct vm_are
 	if (vm_flags & (VM_IO | VM_PFNMAP))
 		return -EFAULT;
 
+	if (gup_flags & FOLL_ANON && !vma_is_anonymous(vma))
+		return -EFAULT;
+
 	if (write) {
 		if (!(vm_flags & VM_WRITE)) {
 			if (!(gup_flags & FOLL_FORCE))
#36 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.101 release. There are 33 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun May 20 08:15:20 UTC 2018. Anything received after that time might be too late.

For v4.9.100-35-gb0935d4:

Build results:

	total: 146 pass: 146 fail: 0
Qemu test results:
	total: 137 pass: 137 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

#37 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-4.9.y boot: 109 boots: 0 failed, 104 passed with 5 offline (v4.9.100-34-g16c619d3e043)

stable-rc/linux-4.9.y boot: 109 boots: 0 failed, 104 passed with 5 offline (v4.9.100-34-g16c619d3e043)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.100-34-g16c619d3e043/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.100-34-g16c619d3e043/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.100-34-g16c619d3e043
Git Commit: 16c619d3e0437e3e655d2e87b67fec0914ad48d9
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 53 unique boards, 22 SoC families, 18 builds out of 183

Offline Platforms:

arm:

tegra_defconfig:
tegra30-beaver: 1 offline lab

multi_v7_defconfig:
armada-xp-openblocks-ax3-4: 1 offline lab
tegra30-beaver: 1 offline lab
zynq-zc702: 1 offline lab

mvebu_v7_defconfig:
armada-xp-openblocks-ax3-4: 1 offline lab

---
For more info write to <[email protected]>

#38 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.101 release. There are 33 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun May 20 08:15:20 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.101-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.9.101-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: b0935d42e12ff5b9efbdded322b1bb7187705bd3
git describe: v4.9.100-35-gb0935d42e12f
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.100-35-gb0935d42e12f

No regressions (compared to build v4.9.100-34-g16c619d3e043)

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c
* boot - pass: 20,
* kselftest - pass: 34, skip: 32
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1015, skip: 135
* ltp-timers-tests - pass: 13,

hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - pass: 35, skip: 28
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1014, skip: 136
* ltp-timers-tests - pass: 13,

juno-r2 - arm64
* boot - pass: 20,
* kselftest - pass: 37, skip: 29
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1015, skip: 135
* ltp-timers-tests - pass: 13,

qemu_arm
* boot - pass: 20,
* kselftest - pass: 34, skip: 32
* libhugetlbfs - pass: 1,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 63, skip: 18
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 58, skip: 5
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 7, skip: 7
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1056, fail: 2, skip: 92
* ltp-timers-tests - pass: 13,

qemu_arm64
* boot - pass: 20, fail: 1,
* kselftest - pass: 35, skip: 33
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 8, skip: 6
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 991, fail: 2, skip: 157
* ltp-timers-tests - pass: 13,

qemu_x86_64
* boot - pass: 20,
* kselftest - pass: 47, skip: 33
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 13, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 998, skip: 152
* ltp-timers-tests - pass: 13,

x15 - arm
* boot - pass: 20,
* kselftest - pass: 36, skip: 29
* libhugetlbfs - pass: 87, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 63, skip: 18
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 58, skip: 5
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 20, skip: 2
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 13, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1075, skip: 75
* ltp-timers-tests - pass: 13,

x86_64
* boot - pass: 22,
* kselftest - pass: 50, skip: 30
* kselftest-vsyscall-mode-native - pass: 49, fail: 1, skip: 30
* kselftest-vsyscall-mode-none - pass: 50, skip: 30
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 58, skip: 5
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 9, skip: 5
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1032, skip: 116
* ltp-timers-tests - pass: 13,

Signature · 2 lines
Linaro QA (BETA)
https://qa-reports.linaro.org
#39 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.101 release. There are 33 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun May 20 08:15:20 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.101-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah