Introduce the request_atomic() for the host
Subsystems (3)
Baolin Wang
maintainerv4 cover Introduce the request_atomic() for the host
This patch set introduces a new request_atomic() interface for the MMC host controller, which is used to submit a request to host in the atomic context, such as in the irq hard handler, to reduce the request latency.
Any comments are welcome. Thanks.
Changes from v3:
- Move patch 3 of V3 patch set into patch 1.
- Add a warning for unexpected return value of request_atomic().
- Remove redundant checking of ops->request().
Changes from v2:
- Return busy flag if encountering unusual card busy state instead of polling in interrupt context.
- Add a work for HSQ to try again in non-atomic context if the host returns busy flag.
Changes from v1:
- Re-split the changes to make them more clear suggested by Ulf.
- Factor out the auto CMD23 checking into a separate function.
Baolin Wang (3):
mmc: host: Introduce the request_atomic() for the host
mmc: host: sdhci: Implement the request_atomic() API
mmc: host: sdhci-sprd: Implement the request_atomic() API
drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++- drivers/mmc/host/mmc_hsq.h | 1 + drivers/mmc/host/sdhci-sprd.c | 23 +++++++++++++-- drivers/mmc/host/sdhci.c | 65 ++++++++++++++++++++++++++++++++----------- drivers/mmc/host/sdhci.h | 4 ++- include/linux/mmc/host.h | 3 ++ 6 files changed, 103 insertions(+), 22 deletions(-)
Signature · 1 line
1.9.1
Baolin Wang
maintainerPATCH v4 1/3 mmc: host: Introduce the request_atomic() for the host
The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API request_atomic() for the host controller, as well as adding support for host software queue to submit a request by the new request_atomic() API.
Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using request_atomic() to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later.
--- drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++++++++++++- drivers/mmc/host/mmc_hsq.h | 1 + include/linux/mmc/host.h | 3 +++ 3 files changed, 32 insertions(+), 1 deletion(-)
drivers/mmc/host/mmc_hsq.c +28 -1
@@ -16,11 +16,20 @@#define HSQ_NUM_SLOTS 64#define HSQ_INVALID_TAG HSQ_NUM_SLOTS +static void mmc_hsq_retry_handler (struct work_struct *work) +{ + struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work); +struct mmc_host *mmc = hsq->mmc; + + mmc->ops->request (mmc, hsq->mrq); +} +static void mmc_hsq_pump_requests (struct mmc_hsq *hsq) {struct mmc_host *mmc = hsq->mmc;struct hsq_slot *slot;unsigned long flags; +int ret =0 ;spin_lock_irqsave (&hsq->lock, flags);
@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)spin_unlock_irqrestore (&hsq->lock, flags); - mmc->ops->request (mmc, hsq->mrq); +if (mmc->ops->request_atomic) + ret = mmc->ops->request_atomic (mmc, hsq->mrq); +else + mmc->ops->request (mmc, hsq->mrq); + +/* +* If returning BUSY from request_atomic(), which means the card +* may be busy now, and we should change to non-atomic context to +* try again for this unusual case, to avoid time-consuming operations +* in the atomic context. +* +* Note: we just give a warning for other error cases, since the host +* driver will handle them. +*/ +if (ret == -EBUSY ) +schedule_work (&hsq->retry_work); +else +WARN_ON_ONCE (ret && ret != -EBUSY ); }static void mmc_hsq_update_next_tag (struct mmc_hsq *hsq,int remains)
@@ -325,6 +351,7 @@ int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc) hsq->mmc->cqe_private = hsq; mmc->cqe_ops = &mmc_hsq_ops; +INIT_WORK (&hsq->retry_work, mmc_hsq_retry_handler);spin_lock_init (&hsq->lock);init_waitqueue_head (&hsq->wait_queue);
drivers/mmc/host/mmc_hsq.h +1 -0
@@ -12,6 +12,7 @@ struct mmc_hsq {wait_queue_head_t wait_queue;struct hsq_slot *slot;spinlock_t lock; +struct work_struct retry_work;int next_tag;int num_slots;
include/linux/mmc/host.h +3 -0
@@ -92,6 +92,9 @@ struct mmc_host_ops { int err);void (*pre_req)(struct mmc_host *host,struct mmc_request *req);void (*request)(struct mmc_host *host,struct mmc_request *req); +/* Submit one request to host in atomic context. */ +int (*request_atomic)(struct mmc_host *host, +struct mmc_request *req);/* * Avoid calling the next three functions too often or in a "fast
Signature · 1 line
1.9.1
Re: [PATCH v4 1/3] mmc: host: Introduce the request_atomic() for the host
Quoted 7 lines · Baolin Wang
The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API
request_atomic()for the host controller, as well as adding support for host software queue to submit a request by the newrequest_atomic()API.
Quoted 8 lines
Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using
request_atomic()to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later.Suggested-by Adrian Hunter <[email protected]>Signed-off-by Baolin Wang <[email protected]>
One minor point below, otherwise:
Quoted 44 lines
--- drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++++++++++++- drivers/mmc/host/mmc_hsq.h | 1 + include/linux/mmc/host.h | 3 +++ 3 files changed, 32 insertions(+), 1 deletion(-)drivers/mmc/host/mmc_hsq.c +17
-1@@ -16,11 +16,20 @@#define HSQ_NUM_SLOTS 64#define HSQ_INVALID_TAG HSQ_NUM_SLOTS +static void mmc_hsq_retry_handler (struct work_struct *work) +{ + struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work); +struct mmc_host *mmc = hsq->mmc; + + mmc->ops->request (mmc, hsq->mrq); +} +static void mmc_hsq_pump_requests (struct mmc_hsq *hsq) {struct mmc_host *mmc = hsq->mmc;struct hsq_slot *slot;unsigned long flags; +int ret =0 ;spin_lock_irqsave (&hsq->lock, flags);@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)spin_unlock_irqrestore (&hsq->lock, flags); - mmc->ops->request (mmc, hsq->mrq); +if (mmc->ops->request_atomic) + ret = mmc->ops->request_atomic (mmc, hsq->mrq); +else + mmc->ops->request (mmc, hsq->mrq); + +/* +* If returning BUSY from request_atomic(), which means the card +* may be busy now, and we should change to non-atomic context to
drivers/mmc/host/mmc_hsq.c static void mmc_hsq_pump_requests(struct mmc_hsq *hsq) · line 71
Quoted 10 lines
drivers/mmc/host/mmc_hsq.c +10
-0+* try again for this unusual case, to avoid time-consuming operations +* in the atomic context. +* +* Note: we just give a warning for other error cases, since the host +* driver will handle them. +*/ +if (ret == -EBUSY ) +schedule_work (&hsq->retry_work); +else +WARN_ON_ONCE (ret && ret != -EBUSY );
'ret != -EBUSY' is redundant because it is always true in the 'else' clause.
Quoted 38 lines
drivers/mmc/host/mmc_hsq.c +1
-0}static void mmc_hsq_update_next_tag (struct mmc_hsq *hsq,int remains)@@ -325,6 +351,7 @@ int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc) hsq->mmc->cqe_private = hsq; mmc->cqe_ops = &mmc_hsq_ops; +INIT_WORK (&hsq->retry_work, mmc_hsq_retry_handler);spin_lock_init (&hsq->lock);init_waitqueue_head (&hsq->wait_queue);drivers/mmc/host/mmc_hsq.h +1
-0@@ -12,6 +12,7 @@ struct mmc_hsq {wait_queue_head_t wait_queue;struct hsq_slot *slot;spinlock_t lock; +struct work_struct retry_work;int next_tag;int num_slots;include/linux/mmc/host.h +3
-0@@ -92,6 +92,9 @@ struct mmc_host_ops { int err);void (*pre_req)(struct mmc_host *host,struct mmc_request *req);void (*request)(struct mmc_host *host,struct mmc_request *req); +/* Submit one request to host in atomic context. */ +int (*request_atomic)(struct mmc_host *host, +struct mmc_request *req);/* * Avoid calling the next three functions too often or in a "fast
Baolin Wang
maintainerRe: [PATCH v4 1/3] mmc: host: Introduce the request_atomic() for the host
Quoted 71 lines · Adrian Hunter
Quoted 7 lines · Baolin Wang
The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API
request_atomic()for the host controller, as well as adding support for host software queue to submit a request by the newrequest_atomic()API.Quoted 8 lines
Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using
request_atomic()to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later.Suggested-by Adrian Hunter <[email protected]>Signed-off-by Baolin Wang <[email protected]>One minor point below, otherwise:
Acked-by Adrian Hunter <[email protected]>Quoted 48 lines
--- drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++++++++++++- drivers/mmc/host/mmc_hsq.h | 1 + include/linux/mmc/host.h | 3 +++ 3 files changed, 32 insertions(+), 1 deletion(-)drivers/mmc/host/mmc_hsq.c +21
-1@@ -16,11 +16,20 @@#define HSQ_NUM_SLOTS 64#define HSQ_INVALID_TAG HSQ_NUM_SLOTS +static void mmc_hsq_retry_handler (struct work_struct *work) +{ + struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work); +struct mmc_host *mmc = hsq->mmc; + + mmc->ops->request (mmc, hsq->mrq); +} +static void mmc_hsq_pump_requests (struct mmc_hsq *hsq) {struct mmc_host *mmc = hsq->mmc;struct hsq_slot *slot;unsigned long flags; +int ret =0 ;spin_lock_irqsave (&hsq->lock, flags);@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)spin_unlock_irqrestore (&hsq->lock, flags); - mmc->ops->request (mmc, hsq->mrq); +if (mmc->ops->request_atomic) + ret = mmc->ops->request_atomic (mmc, hsq->mrq); +else + mmc->ops->request (mmc, hsq->mrq); + +/* +* If returning BUSY from request_atomic(), which means the card +* may be busy now, and we should change to non-atomic context to +* try again for this unusual case, to avoid time-consuming operations +* in the atomic context. +* +* Note: we just give a warning for other error cases, since the host
Quoted 8 lines
drivers/mmc/host/mmc_hsq.c static void mmc_hsq_pump_requests(struct mmc_hsq *hsq) · line 71
Quoted 6 lines
drivers/mmc/host/mmc_hsq.c +6
-0+* driver will handle them. +*/ +if (ret == -EBUSY ) +schedule_work (&hsq->retry_work); +else +WARN_ON_ONCE (ret && ret != -EBUSY );'ret !=
-EBUSY' is redundant because it is always true in the 'else' clause.
Ah, Yes, thanks for pointing this out and I will fix it ine next version.
By the way, could you help to review patch 2 and 3 in this patch set? Thanks.
Quoted 39 lines
Quoted 38 lines
drivers/mmc/host/mmc_hsq.c +1
-0}static void mmc_hsq_update_next_tag (struct mmc_hsq *hsq,int remains)@@ -325,6 +351,7 @@ int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc) hsq->mmc->cqe_private = hsq; mmc->cqe_ops = &mmc_hsq_ops; +INIT_WORK (&hsq->retry_work, mmc_hsq_retry_handler);spin_lock_init (&hsq->lock);init_waitqueue_head (&hsq->wait_queue);drivers/mmc/host/mmc_hsq.h +1
-0@@ -12,6 +12,7 @@ struct mmc_hsq {wait_queue_head_t wait_queue;struct hsq_slot *slot;spinlock_t lock; +struct work_struct retry_work;int next_tag;int num_slots;include/linux/mmc/host.h +3
-0@@ -92,6 +92,9 @@ struct mmc_host_ops { int err);void (*pre_req)(struct mmc_host *host,struct mmc_request *req);void (*request)(struct mmc_host *host,struct mmc_request *req); +/* Submit one request to host in atomic context. */ +int (*request_atomic)(struct mmc_host *host, +struct mmc_request *req);/* * Avoid calling the next three functions too often or in a "fast
Signature · 1 line
Baolin Wang
Adrian Hunter
maintainerRe: [PATCH v4 1/3] mmc: host: Introduce the request_atomic() for the host
Quoted 81 lines · Baolin Wang
Quoted 71 lines · Adrian Hunter
Quoted 7 lines · Baolin Wang
The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API
request_atomic()for the host controller, as well as adding support for host software queue to submit a request by the newrequest_atomic()API.Quoted 8 lines
Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using
request_atomic()to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later.Suggested-by Adrian Hunter <[email protected]>Signed-off-by Baolin Wang <[email protected]>One minor point below, otherwise:
Acked-by Adrian Hunter <[email protected]>Quoted 48 lines
--- drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++++++++++++- drivers/mmc/host/mmc_hsq.h | 1 + include/linux/mmc/host.h | 3 +++ 3 files changed, 32 insertions(+), 1 deletion(-)drivers/mmc/host/mmc_hsq.c +21
-1@@ -16,11 +16,20 @@#define HSQ_NUM_SLOTS 64#define HSQ_INVALID_TAG HSQ_NUM_SLOTS +static void mmc_hsq_retry_handler (struct work_struct *work) +{ + struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work); +struct mmc_host *mmc = hsq->mmc; + + mmc->ops->request (mmc, hsq->mrq); +} +static void mmc_hsq_pump_requests (struct mmc_hsq *hsq) {struct mmc_host *mmc = hsq->mmc;struct hsq_slot *slot;unsigned long flags; +int ret =0 ;spin_lock_irqsave (&hsq->lock, flags);@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)spin_unlock_irqrestore (&hsq->lock, flags); - mmc->ops->request (mmc, hsq->mrq); +if (mmc->ops->request_atomic) + ret = mmc->ops->request_atomic (mmc, hsq->mrq); +else + mmc->ops->request (mmc, hsq->mrq); + +/* +* If returning BUSY from request_atomic(), which means the card +* may be busy now, and we should change to non-atomic context to +* try again for this unusual case, to avoid time-consuming operations +* in the atomic context. +* +* Note: we just give a warning for other error cases, since the host Quoted 8 lines
drivers/mmc/host/mmc_hsq.c static void mmc_hsq_pump_requests(struct mmc_hsq *hsq) · line 71
Quoted 6 lines
drivers/mmc/host/mmc_hsq.c +6
-0+* driver will handle them. +*/ +if (ret == -EBUSY ) +schedule_work (&hsq->retry_work); +else +WARN_ON_ONCE (ret && ret != -EBUSY );'ret !=
-EBUSY' is redundant because it is always true in the 'else' clause.
Quoted 4 lines
Ah, Yes, thanks for pointing this out and I will fix it ine next version.
By the way, could you help to review patch 2 and 3 in this patch set? Thanks.
I'd like to handle the inhibit wait differently. I will make some patches for that and send them out.
Baolin Wang
maintainerRe: [PATCH v4 1/3] mmc: host: Introduce the request_atomic() for the host
Quoted 83 lines · Adrian Hunter
Quoted 81 lines · Baolin Wang
Quoted 79 lines · Adrian Hunter
Quoted 7 lines · Baolin Wang
The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API
request_atomic()for the host controller, as well as adding support for host software queue to submit a request by the newrequest_atomic()API.Quoted 8 lines
Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using
request_atomic()to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later.Suggested-by Adrian Hunter <[email protected]>Signed-off-by Baolin Wang <[email protected]>One minor point below, otherwise:
Acked-by Adrian Hunter <[email protected]>Quoted 44 lines
--- drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++++++++++++- drivers/mmc/host/mmc_hsq.h | 1 + include/linux/mmc/host.h | 3 +++ 3 files changed, 32 insertions(+), 1 deletion(-)drivers/mmc/host/mmc_hsq.c +17
-1@@ -16,11 +16,20 @@#define HSQ_NUM_SLOTS 64#define HSQ_INVALID_TAG HSQ_NUM_SLOTS +static void mmc_hsq_retry_handler (struct work_struct *work) +{ + struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work); +struct mmc_host *mmc = hsq->mmc; + + mmc->ops->request (mmc, hsq->mrq); +} +static void mmc_hsq_pump_requests (struct mmc_hsq *hsq) {struct mmc_host *mmc = hsq->mmc;struct hsq_slot *slot;unsigned long flags; +int ret =0 ;spin_lock_irqsave (&hsq->lock, flags);@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)spin_unlock_irqrestore (&hsq->lock, flags); - mmc->ops->request (mmc, hsq->mrq); +if (mmc->ops->request_atomic) + ret = mmc->ops->request_atomic (mmc, hsq->mrq); +else + mmc->ops->request (mmc, hsq->mrq); + +/* +* If returning BUSY from request_atomic(), which means the card +* may be busy now, and we should change to non-atomic context to drivers/mmc/host/mmc_hsq.c static void mmc_hsq_pump_requests(struct mmc_hsq *hsq) · line 71
Quoted 10 lines
drivers/mmc/host/mmc_hsq.c +10
-0+* try again for this unusual case, to avoid time-consuming operations +* in the atomic context. +* +* Note: we just give a warning for other error cases, since the host +* driver will handle them. +*/ +if (ret == -EBUSY ) +schedule_work (&hsq->retry_work); +else +WARN_ON_ONCE (ret && ret != -EBUSY );'ret !=
-EBUSY' is redundant because it is always true in the 'else' clause.
Quoted 7 lines
Quoted 4 lines
Ah, Yes, thanks for pointing this out and I will fix it ine next version.
By the way, could you help to review patch 2 and 3 in this patch set? Thanks.
I'd like to handle the inhibit wait differently. I will make some patches for that and send them out.
OK, great. I'd like to test them. Thanks.
Signature · 1 line
Baolin Wang
Baolin Wang
maintainerPATCH v4 2/3 mmc: host: sdhci: Implement the request_atomic() API
In reply to Baolin WangImplement the request_atomic() ops for the sdhci driver to process one request in the atomic context if the card is nonremovable.
Moreover, add a boolean parameter for sdhci_send_command() function to indicate if need poll the inhibit bits, which can avoid time-consuming polling in interrupt context by returning BUSY if we met this unusual case through request_atomic() API.
--- drivers/mmc/host/sdhci.c | 65 +++++++++++++++++++++++++++++++++++------------- drivers/mmc/host/sdhci.h | 4 ++- 2 files changed, 51 insertions(+), 18 deletions(-)
drivers/mmc/host/sdhci.c +48 -17
@@ -1539,14 +1539,15 @@ static void sdhci_finish_data(struct sdhci_host *host) }else {/* Avoid triggering warning in sdhci_send_command() */ host->cmd =NULL ; -sdhci_send_command (host, data->stop); +sdhci_send_command (host, data->stop, true); } }else {__sdhci_finish_mrq (host, data->mrq); } } -void sdhci_send_command (struct sdhci_host *host,struct mmc_command *cmd) +int sdhci_send_command (struct sdhci_host *host,struct mmc_command *cmd, +bool polling) {int flags;u32 mask;
@@ -1574,13 +1575,26 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) mask &= ~SDHCI_DATA_INHIBIT ;while (sdhci_readl (host,SDHCI_PRESENT_STATE ) & mask) { -if (timeout ==0 ) { +if (!polling) { +pr_err ("%s: Controller has not released inhibit bit(s), try again.\n" , +mmc_hostname (host->mmc)); + +/* +* HSQ may send a command in interrupt context without +* polling the busy signaling, which means we should +* return BUSY if controller has not released inhibit +* bits to allow HSQ trying to send request again in +* non-atomic context. so we should not finish this +* request here. +*/ +return -EBUSY ; + }else if (timeout ==0 ) {pr_err ("%s: Controller never released inhibit bit(s).\n" ,mmc_hostname (host->mmc));sdhci_dumpregs (host); cmd->error = -EIO ;sdhci_finish_mrq (host, cmd->mrq); -return ; +return -EIO ; } timeout--;mdelay (1 );
@@ -1610,7 +1624,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) mmc_hostname(host->mmc)); cmd->error = -EINVAL ;sdhci_finish_mrq (host, cmd->mrq); -return ; +return -EINVAL ; }if (!(cmd->flags &MMC_RSP_PRESENT ))
@@ -1645,6 +1659,8 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)sdhci_external_dma_pre_transfer (host, cmd);sdhci_writew (host,SDHCI_MAKE_CMD (cmd->opcode, flags),SDHCI_COMMAND ); + +return 0 ; }EXPORT_SYMBOL_GPL (sdhci_send_command);
@@ -1707,7 +1723,7 @@ static void sdhci_finish_command(struct sdhci_host *host)/* Finished CMD23, now send actual command. */ if (cmd == cmd->mrq->sbc) { -sdhci_send_command (host, cmd->mrq->cmd); +sdhci_send_command (host, cmd->mrq->cmd, true); }else {/* Processed actual command. */
@@ -2035,16 +2051,12 @@ void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,* * \*****************************************************************************/ -void sdhci_request (struct mmc_host *mmc,struct mmc_request *mrq) +static int sdhci_start_request (struct mmc_host *mmc,struct mmc_request *mrq, +int present,bool polling) { -struct sdhci_host *host; -int present; +struct sdhci_host *host =mmc_priv (mmc);unsigned long flags; - - host =mmc_priv (mmc); - -/* Firstly check card presence */ - present = mmc->ops->get_cd (mmc); +int ret;spin_lock_irqsave (&host->lock, flags);
@@ -2052,15 +2064,34 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)if (!present || host->flags &SDHCI_DEVICE_DEAD ) { mrq->cmd->error = -ENOMEDIUM ; + ret = -ENOMEDIUM ;sdhci_finish_mrq (host, mrq); }else {if (mrq->sbc && !(host->flags &SDHCI_AUTO_CMD23 )) -sdhci_send_command (host, mrq->sbc); + ret =sdhci_send_command (host, mrq->sbc, polling);else -sdhci_send_command (host, mrq->cmd); + ret =sdhci_send_command (host, mrq->cmd, polling); }spin_unlock_irqrestore (&host->lock, flags); + +return ret; +} + +int sdhci_request_atomic (struct mmc_host *mmc,struct mmc_request *mrq) +{ +return sdhci_start_request (mmc, mrq,1 , false); +} +EXPORT_SYMBOL_GPL (sdhci_request_atomic); + +void sdhci_request (struct mmc_host *mmc,struct mmc_request *mrq) +{ +int present; + +/* Firstly check card presence */ + present = mmc->ops->get_cd (mmc); + +sdhci_start_request (mmc, mrq, present, true); }EXPORT_SYMBOL_GPL (sdhci_request);
@@ -2600,7 +2631,7 @@ void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)*/ sdhci_writew (host,SDHCI_TRNS_READ ,SDHCI_TRANSFER_MODE ); -sdhci_send_command (host, &cmd); +sdhci_send_command (host, &cmd, true); host->cmd =NULL ;
drivers/mmc/host/sdhci.h +3 -1
@@ -757,7 +757,8 @@ void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,int __sdhci_add_host (struct sdhci_host *host);int sdhci_add_host (struct sdhci_host *host);void sdhci_remove_host (struct sdhci_host *host,int dead); -void sdhci_send_command (struct sdhci_host *host,struct mmc_command *cmd); +int sdhci_send_command (struct sdhci_host *host,struct mmc_command *cmd, +bool polling);static inline void sdhci_read_caps (struct sdhci_host *host) {
@@ -776,6 +777,7 @@ void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,void sdhci_set_power_noreg (struct sdhci_host *host,unsigned char mode,unsigned short vdd);void sdhci_request (struct mmc_host *mmc,struct mmc_request *mrq); +int sdhci_request_atomic (struct mmc_host *mmc,struct mmc_request *mrq);void sdhci_set_bus_width (struct sdhci_host *host,int width);void sdhci_reset (struct sdhci_host *host,u8 mask);void sdhci_set_uhs_signaling (struct sdhci_host *host,unsigned timing);
Signature · 1 line
1.9.1
Baolin Wang
maintainerPATCH v4 3/3 mmc: host: sdhci-sprd: Implement the request_atomic() API
In reply to Baolin WangImplement the request_atomic() API for nonremovable cards, that means we can submit next request in the irq hard handler context to reduce latency.
Moreover factor out the AUTO CMD23 checking into a separate function to reduce duplicate code.
--- drivers/mmc/host/sdhci-sprd.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/mmc/host/sdhci-sprd.c +20 -3
@@ -406,7 +406,8 @@ static void sdhci_sprd_request_done(struct sdhci_host *host, .request_done = sdhci_sprd_request_done, }; -static void sdhci_sprd_request (struct mmc_host *mmc,struct mmc_request *mrq) +static void sdhci_sprd_check_auto_cmd23 (struct mmc_host *mmc, +struct mmc_request *mrq) {struct sdhci_host *host =mmc_priv (mmc);struct sdhci_sprd_host *sprd_host =TO_SPRD_HOST (host);
@@ -422,10 +423,23 @@ static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq) mrq->sbc && (mrq->sbc->arg &SDHCI_SPRD_ARG2_STUFF ) && (host->flags & SDHCI_AUTO_CMD23)) host->flags &= ~SDHCI_AUTO_CMD23; +} + +static void sdhci_sprd_request (struct mmc_host *mmc,struct mmc_request *mrq) +{ +sdhci_sprd_check_auto_cmd23 (mmc, mrq);sdhci_request (mmc, mrq); } +static int sdhci_sprd_request_atomic (struct mmc_host *mmc, +struct mmc_request *mrq) +{ +sdhci_sprd_check_auto_cmd23 (mmc, mrq); + +return sdhci_request_atomic (mmc, mrq); +} +static int sdhci_sprd_voltage_switch (struct mmc_host *mmc,struct mmc_ios *ios) {struct sdhci_host *host =mmc_priv (mmc);
@@ -561,6 +575,11 @@ static int sdhci_sprd_probe(struct platform_device *pdev)if (ret) goto pltfm_free; +if (!mmc_card_is_removable (host->mmc)) + host->mmc_host_ops.request_atomic = sdhci_sprd_request_atomic; +else + host->always_defer_done = true; + sprd_host =TO_SPRD_HOST (host);sdhci_sprd_phy_param_parse (sprd_host, pdev->dev.of_node);
@@ -654,8 +673,6 @@ static int sdhci_sprd_probe(struct platform_device *pdev)if (ret) goto err_cleanup_host; - host->always_defer_done = true; - ret =__sdhci_add_host (host);if (ret) goto err_cleanup_host;
Signature · 1 line
1.9.1