Skip to contentSkip to conversation

ALSA: usb-audio: Add support for Presonus Studio 1810c

PATCH New [email protected] 1 participant 1 message Dec 26, 2019 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: usb-audio: Add support for Presonus Studio 1810c

This patch adds support for Presonus Studio 1810c, a usb interface that's UAC2 compliant with a few quirks and a few extra hw-specific controls. I've tested all 3 altsettings and the added switch controls and they work as expected.

More infos on the card:
https://www.presonus.com/products/Studio-1810c

Note that this work is based on packet inspection with usbmon. I just wanted to get this card to work for using it on our open-source radio station:
https://github.com/UoC-Radio

---
 sound/usb/Makefile       |   1 +
 sound/usb/format.c       |  17 ++
 sound/usb/mixer_quirks.c |   5 +
 sound/usb/mixer_s1810c.c | 565 +++++++++++++++++++++++++++++++++++++++
 sound/usb/mixer_s1810c.h |   6 +
 sound/usb/quirks.c       |  34 +++
 6 files changed, 628 insertions(+)
 create mode 100644 sound/usb/mixer_s1810c.c
 create mode 100644 sound/usb/mixer_s1810c.h
sound/usb/Makefile +1 -0
index 78edd7d2f..56031026b 100644
@@ -13,6 +13,7 @@ snd-usb-audio-objs := 	card.o \
 			mixer_scarlett.o \
 			mixer_scarlett_gen2.o \
 			mixer_us16x08.o \
+			mixer_s1810c.o \
 			pcm.o \
 			power.o \
 			proc.o \
sound/usb/format.c +17 -0
index d79db7130..edf3f2a55 100644
@@ -262,6 +262,23 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
 		}
 
 		for (rate = min; rate <= max; rate += res) {
+
+			/*
+			 * Presonus Studio 1810c anounces invalid
+			 * sampling rates for its streams.
+			 */
+			if (chip->usb_id == USB_ID(0x0194f, 0x010c) &&
+			((rate > 48000 && fp->altsetting == 1) ||
+			 ((rate < 88200 || rate > 96000)
+			  && fp->altsetting == 2) ||
+			 ((rate < 176400 || rate > 192000)
+			  && fp->altsetting == 3))) {
+				if (res)
+					continue;
+				else
+					break;
+			}
+
 			if (fp->rate_table)
 				fp->rate_table[nr_rates] = rate;
 			if (!fp->rate_min || rate < fp->rate_min)
sound/usb/mixer_quirks.c +5 -0
index 39e27ae6c..71e705fab 100644
@@ -34,6 +34,7 @@
 #include "mixer_scarlett.h"
 #include "mixer_scarlett_gen2.h"
 #include "mixer_us16x08.h"
+#include "mixer_s1810c.h"
 #include "helper.h"
 
 struct std_mono_table {
@@ -2277,6 +2278,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 	case USB_ID(0x2a39, 0x3fd4): /* RME */
 		err = snd_rme_controls_create(mixer);
 		break;
+
+	case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
+		err = snd_sc1810_init_mixer(mixer);
+		break;
 	}
 
 	return err;
sound/usb/mixer_s1810c.c new file +565 -0

565 lines not on this page · raw message

sound/usb/mixer_s1810c.h new file +6 -0
new file mode 100644
index 000000000..2a9ae0922
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Presonus Studio 1810c driver for ALSA
+ * Copyright (C) 2019 Nick Kossifidis <[email protected]>
+ */
+int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer);
sound/usb/quirks.c +34 -0
index 349e1e529..9a0ceaaf9 100644
@@ -1216,6 +1216,36 @@ static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
 	return 0; /* keep this altsetting */
 }
 
+static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip,
+					   int iface, int altno)
+{
+	/*
+	 * Playback:
+	 * 1: 6 Analog + 2 S/PDIF
+	 * 2: 6 Analog + 2 S/PDIF
+	 * 3: 6 Analog
+	 *
+	 * Capture:
+	 * 1: 8 Analog + 2 S/PDIF + 8 ADAT
+	 * 2: 8 Analog + 2 S/PDIF + 4 ADAT
+	 * 3: 8 Analog
+	 */
+
+	/*
+	 * I'll leave 2 as the default one and
+	 * use device_setup to switch to the
+	 * other two.
+	 */
+	if (chip->setup == 1 && altno != 1)
+		return 1;
+	else if (chip->setup == 2 && altno != 3)
+		return 1;
+	else if (altno != 2)
+		return 1;
+
+	return 0;
+}
+
 int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
 				  int iface,
 				  int altno)
@@ -1229,6 +1259,10 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
 	/* fasttrackpro usb: skip altsets incompatible with device_setup */
 	if (chip->usb_id == USB_ID(0x0763, 0x2012))
 		return fasttrackpro_skip_setting_quirk(chip, iface, altno);
+	/* presonus studio 1810c: skip altsets incompatible with device_setup */
+	if (chip->usb_id == USB_ID(0x0194f, 0x010c))
+		return s1810c_skip_setting_quirk(chip, iface, altno);
+
 
 	return 0;
 }
Signature · 6 lines
2.23.0

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel