iio: adc: max1363: replace uses of mlock
PATCH v6 1/1 iio: adc: max1363: replace uses of mlock
Replace usage indio_dev's mlock with either local lock or iio_device_claim_direct_mode.
---
Changelog v5 -> v6
* Minor failure handling fixes
Changelog v4 -> v5
* Use local lock too at places where driver state needs to be protected.
Changelog v3 -> v4
* Fix indentation
Changelog v2 -> v3
* use iio_device_claim_direct when switching modes
* replace mlock usage in max1363_write_event_config
Changelog v1 -> v2
* Fix indentation
drivers/iio/adc/max1363.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
drivers/iio/adc/max1363.c +22 -9
@@ -150,6 +150,7 @@ struct max1363_chip_info {* @current_mode: the scan mode of this chip * @requestedmask: a valid requested set of channels * @reg: supply regulator +* @lock lock to ensure state is consistent * @monitor_on: whether monitor mode is enabled * @monitor_speed: parameter corresponding to device monitor speed setting * @mask_high: bitmask for enabled high thresholds
@@ -169,6 +170,7 @@ struct max1363_state {const struct max1363_mode *current_mode;u32 requestedmask;struct regulator *reg; +struct mutex lock;/* Using monitor modes and buffer at the same time is currently not supported */
@@ -364,7 +366,11 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,struct max1363_state *st =iio_priv (indio_dev);struct i2c_client *client = st->client; -mutex_lock (&indio_dev->mlock); + ret =iio_device_claim_direct_mode (indio_dev); +mutex_lock (&st->lock); + +if (ret <0 ) + goto error_ret;/* * If monitor mode is enabled, the method for reading a single * channel will have to be rather different and has not yet
@@ -372,7 +378,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,* * Also, cannot read directly if buffered capture enabled. */ -if (st->monitor_on ||iio_buffer_enabled (indio_dev)) { +if (st->monitor_on) { ret = -EBUSY ; goto error_ret; }
@@ -404,8 +410,9 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, data = rxbuf[0 ]; } *val = data; + error_ret: -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return ret; }
@@ -705,9 +712,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,if (!found)return -EINVAL ; -mutex_lock (&indio_dev->mlock); +mutex_lock (&st->lock); st->monitor_speed = i; -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return 0 ; }
@@ -810,12 +817,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev,int val;int number = chan->channel; -mutex_lock (&indio_dev->mlock); +mutex_lock (&st->lock);if (dir ==IIO_EV_DIR_FALLING ) val = (1 << number) & st->mask_low;else val = (1 << number) & st->mask_high; -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return val; }
@@ -962,7 +969,12 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,u16 unifiedmask;int number = chan->channel; -mutex_lock (&indio_dev->mlock); + ret =iio_device_claim_direct_mode (indio_dev); +mutex_lock (&st->lock); + +if (ret <0 ) + goto error_ret; + unifiedmask = st->mask_low | st->mask_high;if (dir ==IIO_EV_DIR_FALLING ) {
@@ -989,7 +1001,7 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,max1363_monitor_mode_update (st, !!(st->mask_high | st->mask_low)); error_ret: -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return ret; }
@@ -1587,6 +1599,7 @@ static int max1363_probe(struct i2c_client *client, st =iio_priv (indio_dev); +mutex_init (&st->lock); st->reg =devm_regulator_get (&client->dev,"vcc" );if (IS_ERR (st->reg)) { ret =PTR_ERR (st->reg);
Signature · 1 line
2.23.0.385.gbc12974a89
Pl. ignore this patch, it contains incorrect logic. Thanks,
Rohit
Quoted 138 lines · Rohit Sarkar
Replace usage indio_dev's mlock with either local lock or
iio_device_claim_direct_mode.Signed-off-by Rohit Sarkar <[email protected]>---
Changelog v5 -> v6
* Minor failure handling fixesChangelog v4 -> v5
* Use local lock too at places where driver state needs to be protected.Changelog v3 -> v4
* Fix indentationChangelog v2 -> v3
* useiio_device_claim_directwhen switching modes
* replace mlock usage inmax1363_write_event_configChangelog v1 -> v2
* Fix indentationdrivers/iio/adc/max1363.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)drivers/iio/adc/max1363.c +22
-9@@ -150,6 +150,7 @@ struct max1363_chip_info {* @current_mode: the scan mode of this chip * @requestedmask: a valid requested set of channels * @reg: supply regulator +* @lock lock to ensure state is consistent * @monitor_on: whether monitor mode is enabled * @monitor_speed: parameter corresponding to device monitor speed setting * @mask_high: bitmask for enabled high thresholds @@ -169,6 +170,7 @@ struct max1363_state {const struct max1363_mode *current_mode;u32 requestedmask;struct regulator *reg; +struct mutex lock;/* Using monitor modes and buffer at the same time is currently not supported */ @@ -364,7 +366,11 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,struct max1363_state *st =iio_priv (indio_dev);struct i2c_client *client = st->client; -mutex_lock (&indio_dev->mlock); + ret =iio_device_claim_direct_mode (indio_dev); +mutex_lock (&st->lock); + +if (ret <0 ) + goto error_ret;/* * If monitor mode is enabled, the method for reading a single * channel will have to be rather different and has not yet @@ -372,7 +378,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,* * Also, cannot read directly if buffered capture enabled. */ -if (st->monitor_on ||iio_buffer_enabled (indio_dev)) { +if (st->monitor_on) { ret = -EBUSY ; goto error_ret; }@@ -404,8 +410,9 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, data = rxbuf[0 ]; } *val = data; + error_ret: -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return ret; }@@ -705,9 +712,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,if (!found)return -EINVAL ; -mutex_lock (&indio_dev->mlock); +mutex_lock (&st->lock); st->monitor_speed = i; -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return 0 ; }@@ -810,12 +817,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev,int val;int number = chan->channel; -mutex_lock (&indio_dev->mlock); +mutex_lock (&st->lock);if (dir ==IIO_EV_DIR_FALLING ) val = (1 << number) & st->mask_low;else val = (1 << number) & st->mask_high; -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return val; }@@ -962,7 +969,12 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,u16 unifiedmask;int number = chan->channel; -mutex_lock (&indio_dev->mlock); + ret =iio_device_claim_direct_mode (indio_dev); +mutex_lock (&st->lock); + +if (ret <0 ) + goto error_ret; + unifiedmask = st->mask_low | st->mask_high;if (dir ==IIO_EV_DIR_FALLING ) {@@ -989,7 +1001,7 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,max1363_monitor_mode_update (st, !!(st->mask_high | st->mask_low)); error_ret: -mutex_unlock (&indio_dev->mlock); +mutex_unlock (&st->lock);return ret; }@@ -1587,6 +1599,7 @@ static int max1363_probe(struct i2c_client *client, st =iio_priv (indio_dev); +mutex_init (&st->lock); st->reg =devm_regulator_get (&client->dev,"vcc" );if (IS_ERR (st->reg)) { ret =PTR_ERR (st->reg);Signature · 1 line
2.23.0.385.gbc12974a89