raspi3 vs raspi2
Hi Khem, Trevor,
I've submitted part of it yesterday, the rest should come out today hopefully.
The 2 machine types - raspberrypi3 and raspberrypi3-64 - have been submitted to yocto/meta-raspberrypi.
They will need tune-cortexa53.inc - I've sent a version to oe-core, but I got it wrong again, so I will resend it hopefully again, along with a modified version of arch-armv8.inc.
I have some patches to support 64bits on Raspberrypi3 that should be pushed -hopefully - today. They're on 4.7.10, though.
Herve
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Khem Raj
Sent: samedi 19 novembre 2016 18:30
To: Trevor Woerner <[email protected]>
Cc: [email protected]
Subject: ***SPAM*** Re: [yocto] [raspberrypi] raspi3 vs raspi2
Quoted 5 lines · Trevor Woerner
Hi,
I was wondering if there were any plans to create a MACHINE=raspberrypi3 that treats the raspi3 like the CortexA53 that it is instead of generating images that are backwards compatible with the
CortexA7 that is the raspi2?
Thats a good question. I know few folks who have done 64bit port of OE on rpi3 so I would be interested in such patches where we add rpi3-64 machine type.
do you have patches to submit ? Please do
Quoted 8 lines
Best regards,
Trevor
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Herve
Quoted 9 lines · Herve Jourdain
Hi Khem, Trevor,
I've submitted part of it yesterday, the rest should come out today hopefully.
The 2 machine types - raspberrypi3 and raspberrypi3-64 - have been submitted to yocto/meta-raspberrypi.
They will need tune-cortexa53.inc - I've sent a version to oe-core, but I got it wrong again, so I will resend it hopefully again, along with a modified version of arch-armv8.inc.
I gave a whirl at building and looking closely at them. As it seems the OE core patch is
not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.
https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them
and also fixed 4.8 to compile arm64.
Quoted 3 lines
I have some patches to support 64bits on Raspberrypi3 that should be pushed -hopefully - today. They're on 4.7.10, though.
I think it will be better to rebase them to 4.8 and eventually 4.9 if they are not too intrusive.
Quoted 38 lines
Herve
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Khem Raj
Sent: samedi 19 novembre 2016 18:30
To: Trevor Woerner <[email protected]>
Cc: [email protected]
Subject: ***SPAM*** Re: [yocto] [raspberrypi] raspi3 vs raspi2Quoted 5 lines · Trevor Woerner
Hi,
I was wondering if there were any plans to create a MACHINE=raspberrypi3 that treats the raspi3 like the CortexA53 that it is instead of generating images that are backwards compatible with the
CortexA7 that is the raspi2?
Thats a good question. I know few folks who have done 64bit port of OE on rpi3 so I would be interested in such patches where we add rpi3-64 machine type.
do you have patches to submit ? Please doQuoted 8 lines
Best regards,
Trevor
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Wow, this is great news! Thanks, both of you :-)
Quoted 69 lines · Khem Raj
Herve
Quoted 9 lines · Herve Jourdain
Hi Khem, Trevor,
I've submitted part of it yesterday, the rest should come out today hopefully.
The 2 machine types - raspberrypi3 and raspberrypi3-64 - have been submitted to yocto/meta-raspberrypi.
They will need tune-cortexa53.inc - I've sent a version to oe-core, but I got it wrong again, so I will resend it hopefully again, along with a modified version of arch-armv8.inc.I gave a whirl at building and looking closely at them. As it seems the OE core patch is
not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them
and also fixed 4.8 to compile arm64.Quoted 3 lines
I have some patches to support 64bits on Raspberrypi3 that should be pushed -hopefully - today. They're on 4.7.10, though.
I think it will be better to rebase them to 4.8 and eventually 4.9 if they are not too intrusive.
Quoted 38 lines
Herve
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Khem Raj
Sent: samedi 19 novembre 2016 18:30
To: Trevor Woerner <[email protected]>
Cc: [email protected]
Subject: ***SPAM*** Re: [yocto] [raspberrypi] raspi3 vs raspi2Quoted 5 lines · Trevor Woerner
Hi,
I was wondering if there were any plans to create a MACHINE=raspberrypi3 that treats the raspi3 like the CortexA53 that it is instead of generating images that are backwards compatible with the
CortexA7 that is the raspi2?
Thats a good question. I know few folks who have done 64bit port of OE on rpi3 so I would be interested in such patches where we add rpi3-64 machine type.
do you have patches to submit ? Please doQuoted 8 lines
Best regards,
Trevor
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 10 lines · Khem Raj
I gave a whirl at building and looking closely at them. As it seems the OE core patch is
not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them
and also fixed 4.8 to compile arm64.
I tried giving this a whirl.
Maybe the order of my layers in bblayers isn't correct, but by default my build uses 4.4% instead of 4.8%.
conf/machine/raspberrypi3-64.conf includes:
... include conf/machine/include/rpi-base.inc ... PREFERRED_VERSION_linux-raspberrypi ?= "4.8.%"
conf/machine/include/rpi-base.inc contains:
... include conf/machine/include/rpi-default-versions.inc ...
conf/machine/include/rpi-default-versions.inc contains:
... PREFERRED_VERSION_linux-raspberrypi ?= "4.4.%"
In any case when I try building with 4.4 I get:
ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: No default configuration for raspberrypi3-64 / bcmrpi3_defconfig available. ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: Function failed: do_kernel_configme (log file is located at /z/layerindex-master/raspi3-64/tmp-glibc/work/raspberrypi3_64-oe-linux/linux-raspberrypi/1_4.4.28+gitAUTOINC+5afda48c34-r0/temp/log.do_kernel_configme.15498)
When I switch to 4.8 explicitly in my conf/local.conf I get:
ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0 do_fetch: Fetcher failure: Unable to find revision ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7 in branch rpi-4.8.y even from upstream
ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0 do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y'. Unable to fetch URL from any source.
My build configuration is:
Build Configuration:
BB_VERSION = "1.32.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "opensuse-42.1"
TARGET_SYS = "aarch64-oe-linux"
MACHINE = "raspberrypi3-64"
DISTRO = "nodistro"
DISTRO_VERSION = "nodistro.0"
TUNE_FEATURES = "aarch64"
TARGET_FPU = ""
meta-raspberrypi__kraj = "kraj/master:4735e7cde210b2b0b855bca1eb90ef4adca8019b"
meta = "master:a675b2c89e477af088faee9b3be96eae19a85f0b"
meta-oe
meta-gnome = "master:7f8915a6ecdd5c4b03c7e5b5f1fa903f89c2d560"
4.4 does not support 64-bit pi3, do you set the PREFERRED_VERSION in local conf metadata ?
Quoted 58 lines · Trevor Woerner
Quoted 10 lines · Khem Raj
I gave a whirl at building and looking closely at them. As it seems the OE core patch is
not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them
and also fixed 4.8 to compile arm64.I tried giving this a whirl.
Maybe the order of my layers in bblayers isn't correct, but by default my build uses 4.4% instead of 4.8%.
conf/machine/raspberrypi3-64.confincludes:... include conf/machine/include/rpi-base.inc ... PREFERRED_VERSION_linux-raspberrypi ?= "4.8.%"conf/machine/include/rpi-base.inc contains:
... include conf/machine/include/rpi-default-versions.inc ...conf/machine/include/rpi-default-versions.inc contains:
... PREFERRED_VERSION_linux-raspberrypi ?= "4.4.%"In any case when I try building with 4.4 I get:
ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: No default configuration for raspberrypi3-64 / bcmrpi3_defconfig available. ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: Function failed: do_kernel_configme (log file is located at /z/layerindex-master/raspi3-64/tmp-glibc/work/raspberrypi3_64-oe-linux/linux-raspberrypi/1_4.4.28+gitAUTOINC+5afda48c34-r0/temp/log.do_kernel_configme.15498)When I switch to 4.8 explicitly in my
conf/local.confI get:ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0
do_fetch: Fetcher failure: Unable to find revisionea6eeaff07c4881e6287fe3e7ea58fc30e5569d7in branch rpi-4.8.y even from upstream
ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y'. Unable to fetch URL from any source.My build configuration is:
Build Configuration:
BB_VERSION= "1.32.0"
BUILD_SYS= "x86_64-linux"
NATIVELSBSTRING = "opensuse-42.1"
TARGET_SYS= "aarch64-oe-linux"
MACHINE = "raspberrypi3-64"
DISTRO = "nodistro"
DISTRO_VERSION= "nodistro.0"
TUNE_FEATURES= "aarch64"
TARGET_FPU= ""
meta-raspberrypi__kraj = "kraj/master:4735e7cde210b2b0b855bca1eb90ef4adca8019b"
meta = "master:a675b2c89e477af088faee9b3be96eae19a85f0b"
meta-oe
meta-gnome = "master:7f8915a6ecdd5c4b03c7e5b5f1fa903f89c2d560"
Quoted 2 lines · Khem Raj
4.4 does not support 64-bit pi3, do you set the
PREFERRED_VERSIONin local conf metadata ?
Yes, my conf/local.conf contains:
PREFERRED_VERSION_linux-raspberrypi = "4.8%"
If you clone git://github.com/raspberrypi/linux.git and checkout the 4.8.y branch, you'll see that there's no commit ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7 anywhere in that branch. In fact there is no such commit anywhere in that repository:
$ git branch --contains ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7 error: no such commit ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7
Quoted 61 lines · Trevor Woerner
Quoted 58 lines · Khem Raj
Quoted 10 lines
I gave a whirl at building and looking closely at them. As it seems the OE core patch is
not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them
and also fixed 4.8 to compile arm64.I tried giving this a whirl.
Maybe the order of my layers in bblayers isn't correct, but by default my build uses 4.4% instead of 4.8%.
conf/machine/raspberrypi3-64.confincludes:... include conf/machine/include/rpi-base.inc ... PREFERRED_VERSION_linux-raspberrypi ?= "4.8.%"conf/machine/include/rpi-base.inc contains:
... include conf/machine/include/rpi-default-versions.inc ...conf/machine/include/rpi-default-versions.inc contains:
... PREFERRED_VERSION_linux-raspberrypi ?= "4.4.%"In any case when I try building with 4.4 I get:
ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: No default configuration for raspberrypi3-64 / bcmrpi3_defconfig available. ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: Function failed: do_kernel_configme (log file is located at /z/layerindex-master/raspi3-64/tmp-glibc/work/raspberrypi3_64-oe-linux/linux-raspberrypi/1_4.4.28+gitAUTOINC+5afda48c34-r0/temp/log.do_kernel_configme.15498)When I switch to 4.8 explicitly in my
conf/local.confI get:ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0
do_fetch: Fetcher failure: Unable to find revisionea6eeaff07c4881e6287fe3e7ea58fc30e5569d7in branch rpi-4.8.y even from upstream
ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y'. Unable to fetch URL from any source.My build configuration is:
Build Configuration:
BB_VERSION= "1.32.0"
BUILD_SYS= "x86_64-linux"
NATIVELSBSTRING = "opensuse-42.1"
TARGET_SYS= "aarch64-oe-linux"
MACHINE = "raspberrypi3-64"
DISTRO = "nodistro"
DISTRO_VERSION= "nodistro.0"
TUNE_FEATURES= "aarch64"
TARGET_FPU= ""
meta-raspberrypi__kraj = "kraj/master:4735e7cde210b2b0b855bca1eb90ef4adca8019b"
meta = "master:a675b2c89e477af088faee9b3be96eae19a85f0b"
meta-oe
meta-gnome = "master:7f8915a6ecdd5c4b03c7e5b5f1fa903f89c2d560"
Hi Trevor,
I've never tried with 4.8, but I sent patches to the list that add 64 bits support for 4.7.10 - and this one, I tested and it is working. It's probably possible to port 64 bits to 4.4 as well, but I'm not sure if it's worth the effort.
I have 4.7 covered, there is some "built-in" level of support in 4.8 (but I don't know what's working or not there), and I'll sure work it for 4.9 soon.
Herve
-----Original Message-----
From: Trevor Woerner [mailto:[email protected]]
Sent: mardi 22 novembre 2016 06:39
To: Khem Raj <[email protected]>
Cc: Herve Jourdain <[email protected]>; [email protected]
Subject: Re: [yocto] [raspberrypi] raspi3 vs raspi2
Quoted 2 lines · Khem Raj
4.4 does not support 64-bit pi3, do you set the
PREFERRED_VERSIONin local conf metadata ?
Yes, my conf/local.conf contains:
PREFERRED_VERSION_linux-raspberrypi = "4.8%"
If you clone git://github.com/raspberrypi/linux.git and checkout the 4.8.y branch, you'll see that there's no commit ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7 anywhere in that branch. In fact there is no such commit anywhere in that repository:
$ git branch --contains ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7 error: no such commit ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7
Quoted 65 lines · Trevor Woerner
Quoted 62 lines · Khem Raj
Quoted 9 lines
I gave a whirl at building and looking closely at them. As it seems the OE core patch is not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.
https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them and also fixed 4.8 to compile arm64.
I tried giving this a whirl.
Maybe the order of my layers in bblayers isn't correct, but by default my build uses 4.4% instead of 4.8%.
conf/machine/raspberrypi3-64.confincludes:... include conf/machine/include/rpi-base.inc ... PREFERRED_VERSION_linux-raspberrypi ?= "4.8.%"conf/machine/include/rpi-base.inc contains:
... include conf/machine/include/rpi-default-versions.inc ...conf/machine/include/rpi-default-versions.inc contains:
... PREFERRED_VERSION_linux-raspberrypi ?= "4.4.%"In any case when I try building with 4.4 I get:
ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: No default configuration for raspberrypi3-64 / bcmrpi3_defconfig available. ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0
do_kernel_configme: Function failed:do_kernel_configme(log file is located at /z/layerindex-master/raspi3-64/tmp-glibc/work/raspberrypi3_64-oe-lin ux/linux-raspberrypi/1_4.4.28+gitAUTOINC+5afda48c34-r0/temp/log.do_k ernel_configme.15498)When I switch to 4.8 explicitly in my
conf/local.confI get:ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0
do_fetch: Fetcher failure: Unable to find revisionea6eeaff07c4881e6287fe3e7ea58fc30e5569d7in branch rpi-4.8.y even from upstream
ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y'. Unable to fetch URL from any source.My build configuration is:
Build Configuration:
BB_VERSION= "1.32.0"
BUILD_SYS= "x86_64-linux"
NATIVELSBSTRING = "opensuse-42.1"
TARGET_SYS= "aarch64-oe-linux"
MACHINE = "raspberrypi3-64"
DISTRO = "nodistro"
DISTRO_VERSION= "nodistro.0"
TUNE_FEATURES= "aarch64"
TARGET_FPU= ""
meta-raspberrypi__kraj = "kraj/master:4735e7cde210b2b0b855bca1eb90ef4adca8019b"
meta = "master:a675b2c89e477af088faee9b3be96eae19a85f0b"
meta-oe
meta-gnome = "master:7f8915a6ecdd5c4b03c7e5b5f1fa903f89c2d560"
Quoted 8 lines · Trevor Woerner
Quoted 2 lines · Khem Raj
4.4 does not support 64-bit pi3, do you set the
PREFERRED_VERSIONin local conf metadata ?Yes, my
conf/local.confcontains:PREFERRED_VERSION_linux-raspberrypi = "4.8%"
Quoted 8 lines
If you clone
git://github.com/raspberrypi/linux.gitand checkout the 4.8.y branch, you'll see that there's no commitea6eeaff07c4881e6287fe3e7ea58fc30e5569d7anywhere in that branch. In fact there is no such commit anywhere in that repository:$ git branch --contains ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7 error: no such commit ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7
Did you take
https://github.com/kraj/meta-raspberrypi/commit/361757b9c1538b0a15577d75308ecef93db55965
as well?
Quoted 64 lines
Quoted 61 lines · Trevor Woerner
Quoted 58 lines · Khem Raj
Quoted 10 lines
I gave a whirl at building and looking closely at them. As it seems the OE core patch is
not needed since for armv8 we want to keep it like x86 ( common ) I have therefore made changes to your patches and staged them here.https://github.com/kraj/meta-raspberrypi/commits/kraj/master
Which should work without any change in OE-Core, secondly I have further divided them
and also fixed 4.8 to compile arm64.I tried giving this a whirl.
Maybe the order of my layers in bblayers isn't correct, but by default my build uses 4.4% instead of 4.8%.
conf/machine/raspberrypi3-64.confincludes:... include conf/machine/include/rpi-base.inc ... PREFERRED_VERSION_linux-raspberrypi ?= "4.8.%"conf/machine/include/rpi-base.inc contains:
... include conf/machine/include/rpi-default-versions.inc ...conf/machine/include/rpi-default-versions.inc contains:
... PREFERRED_VERSION_linux-raspberrypi ?= "4.4.%"In any case when I try building with 4.4 I get:
ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: No default configuration for raspberrypi3-64 / bcmrpi3_defconfig available. ERROR: linux-raspberrypi-1_4.4.28+gitAUTOINC+5afda48c34-r0 do_kernel_configme: Function failed: do_kernel_configme (log file is located at /z/layerindex-master/raspi3-64/tmp-glibc/work/raspberrypi3_64-oe-linux/linux-raspberrypi/1_4.4.28+gitAUTOINC+5afda48c34-r0/temp/log.do_kernel_configme.15498)When I switch to 4.8 explicitly in my
conf/local.confI get:ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0
do_fetch: Fetcher failure: Unable to find revisionea6eeaff07c4881e6287fe3e7ea58fc30e5569d7in branch rpi-4.8.y even from upstream
ERROR: linux-raspberrypi-1_4.8.8+gitAUTOINC+ea6eeaff07-r0do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y'. Unable to fetch URL from any source.My build configuration is:
Build Configuration:
BB_VERSION= "1.32.0"
BUILD_SYS= "x86_64-linux"
NATIVELSBSTRING = "opensuse-42.1"
TARGET_SYS= "aarch64-oe-linux"
MACHINE = "raspberrypi3-64"
DISTRO = "nodistro"
DISTRO_VERSION= "nodistro.0"
TUNE_FEATURES= "aarch64"
TARGET_FPU= ""
meta-raspberrypi__kraj = "kraj/master:4735e7cde210b2b0b855bca1eb90ef4adca8019b"
meta = "master:a675b2c89e477af088faee9b3be96eae19a85f0b"
meta-oe
meta-gnome = "master:7f8915a6ecdd5c4b03c7e5b5f1fa903f89c2d560"
Quoted 5 lines · Khem Raj
Did you take
https://github.com/kraj/meta-raspberrypi/commit/361757b9c1538b0a15577d75308ecef93db55965
as well?
Yes, I'm using the following as of 4735e7cde210b2b0b855bca1eb90ef4adca8019b, which includes 361757b9c1538b0a15577d75308ecef93db55965.
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
My build configuration is:
Build Configuration:
BB_VERSION= "1.32.0"
BUILD_SYS= "x86_64-linux"
NATIVELSBSTRING = "opensuse-42.1"
TARGET_SYS= "aarch64-oe-linux"
MACHINE = "raspberrypi3-64"
DISTRO = "nodistro"
DISTRO_VERSION= "nodistro.0"
TUNE_FEATURES= "aarch64"
TARGET_FPU= ""
meta-raspberrypi__kraj = "kraj/master:4735e7cde210b2b0b855bca1eb90ef4adca8019b"
meta = "master:a675b2c89e477af088faee9b3be96eae19a85f0b"
meta-oe
meta-gnome = "master:7f8915a6ecdd5c4b03c7e5b5f1fa903f89c2d560"
What's even more odd is commit 361757b9c1538b0a15577d75308ecef93db55965 switched the SRCREV from 6abac13566786086cd912d87e4f1a922e2a391b2 to ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7, but neither of those are found ingit://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y (or in that repository at all).
commit 361757b9c1538b0a15577d75308ecef93db55965 Author: Khem Raj <[email protected]> Date: Sat Nov 12 11:32:56 2016 -0800 linux-raspberrypi-4.8: Update to 4.8.8 Signed-off-by: Khem Raj <[email protected]> diff --git a/recipes-kernel/linux/linux-raspberrypi_4.8.bb b/recipes-kernel/linux/linux-raspberrypi_4.8.bb index 4664249..323b0ea 100644 --- a/recipes-kernel/linux/linux-raspberrypi_4.8.bb +++ b/recipes-kernel/linux/linux-raspberrypi_4.8.bb @@ -1,8 +1,8 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:" -LINUX_VERSION ?= "4.8.6" +LINUX_VERSION ?= "4.8.8" -SRCREV = "6abac13566786086cd912d87e4f1a922e2a391b2" +SRCREV = "ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7" SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y \ " require linux-raspberrypi.inc
I'm currently trying 3ce7378bb505825f492615bd71d19a2339e5bf55, which is the current HEAD of the 4.8.y branch of the raspi kernel repository.
Quoted 2 lines · Trevor Woerner
I'm currently trying
3ce7378bb505825f492615bd71d19a2339e5bf55, which is the current HEAD of the 4.8.y branch of the raspi kernel repository.
It builds if I:
diff --git a/recipes-kernel/linux/linux-raspberrypi_4.8.bb b/recipes-kernel/linux/linux-raspberrypi_4.8.bb
index 323b0ea..cbb8a50 100644
--- a/recipes-kernel/linux/linux-raspberrypi_4.8.bb
+++ b/recipes-kernel/linux/linux-raspberrypi_4.8.bb
@@ -1,8 +1,8 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
-LINUX_VERSION ?= "4.8.8"
+LINUX_VERSION ?= "4.8.9"
-SRCREV = "ea6eeaff07c4881e6287fe3e7ea58fc30e5569d7"
+SRCREV = "3ce7378bb505825f492615bd71d19a2339e5bf55"
SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y \
"
require linux-raspberrypi.incbut it doesn't (appear to) boot.
Is there a way to enable the console of the bootloader? I don't get anything on the console (which I do if I load a raspi2 image), and no lights are blinking (which occurs with a raspi2 image).