tc filter and ip match
hi all
people, I'm using tc and htb to create classes and do some QoS , but i would like to know if i can do it:
after to create the classes I need to create the rules using tc filter :
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst 10.0.0.0/8 flowid 1:10
ok, this rule works with all packets going to 10.0.0.0/8, but how can i write a rule using "!" or "not" , like :
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst NOT 10.0.0.0/8 flowid 1:10
ps.: I would not like to use iptables and mangle table.
did you understand ?
best regards
Signature · 6 lines
Glaucius Djalma Pereira Junior [email protected] _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I am not sure if you can have a NOT in filter. But you can have 2 classes one of which is default with restriction and make the filter pass through the other one.
Quoted 25 lines · Glaucius Djalma Pereira Junior
hi all
people, I'm using tc and htb to create classes and do some QoS , but i would like to know if i can do it:
after to create the classes I need to create the rules using tc filter :
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst 10.0.0.0/8 flowid 1:10
ok, this rule works with all packets going to 10.0.0.0/8, but how can i write a rule using "!" or "not" , like :
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst NOT 10.0.0.0/8 flowid 1:10
ps.: I would not like to use iptables and mangle table.
did you understand ?
best regards
Quoted 8 lines
--
Glaucius Djalma Pereira Junior
[email protected]
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 13 lines · Glaucius Djalma Pereira Junior
hi all
people, I'm using tc and htb to create classes and do some QoS , but i would like to know if i can do it:
after to create the classes I need to create the rules using tc filter :
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst 10.0.0.0/8 flowid 1:10
ok, this rule works with all packets going to 10.0.0.0/8, but how can i write a rule using "!" or "not" , like :
Quoted 6 lines
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst NOT 10.0.0.0/8 flowid 1:10
ps.: I would not like to use iptables and mangle table.
did you understand ?
If you want 10.0.0.0/8 to be unshaped by htb and the rest go to 1:10, don't set a default class and filter like -
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst 10.0.0.0/8 flowid 1:99
tc filter add dev eth0 protocol ip parent 1:0 prio 2 u32 match u32 0 0 flowid 1:10
where 1:99 doesn't exist as an htb class.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc