Skip to contentSkip to conversation

aspeed: Deprecate the tacoma-bmc machine

PATCH Applied Cédric Le Goater 5 participants 14 messages Jun 25, 2024 – Sep 11, 2024 Arm/Aspeed machine support

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 aspeed: Deprecate the tacoma-bmc machine

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

---

Changes since v2:
- rephrased deprecation reason
- remove extra line in docs

 docs/about/deprecated.rst | 8 ++++++++
 hw/arm/aspeed.c           | 2 ++
 2 files changed, 10 insertions(+)
docs/about/deprecated.rst +8 -0
index ff3da68208ac..5d9e4d8de725 100644
@@ -256,6 +256,14 @@ images are not available, OpenWRT dropped support in 2019, U-Boot in
 2017, Linux also is dropping support in 2024. It is time to let go of
 this ancient hardware and focus on newer CPUs and platforms.
 
+Arm ``tacoma-bmc`` machine (since 9.1)
+''''''''''''''''''''''''''''''''''''''''
+
+The ``tacoma-bmc`` machine was a board including an AST2600 SoC based
+BMC and a witherspoon like OpenPOWER system. It was used for bring up
+of the AST2600 SoC in labs.  It can be easily replaced by the
+``rainier-bmc`` machine which is a real product.
+
 Backend options
 ---------------
 
hw/arm/aspeed.c +2 -0
index 40dc0e4c76db..53a4f665d0d0 100644
@@ -1379,6 +1379,8 @@ static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data)
     amc->i2c_init  = witherspoon_bmc_i2c_init; /* Same board layout */
     mc->default_ram_size = 1 * GiB;
     aspeed_machine_class_init_cpus_defaults(mc);
+
+    mc->deprecation_reason = "Please use the similar 'rainier-bmc' machine";
 };
 
 static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data)
Signature · 1 line
2.45.2
Reviewed-by on v2 1/1
#1 lore raw
Quoted 8 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

---

Quoted 7 lines

Changes since v2:
- rephrased deprecation reason
- remove extra line in docs

  docs/about/deprecated.rst | 8 ++++++++
  hw/arm/aspeed.c           | 2 ++
  2 files changed, 10 insertions(+)
#2 lore raw
In reply to Cédric Le Goater
Quoted 6 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

Applied to aspeed-next.

Thanks,

C.

Quoted 42 lines

---

Changes since v2:
- rephrased deprecation reason
- remove extra line in docs

  docs/about/deprecated.rst | 8 ++++++++
  hw/arm/aspeed.c           | 2 ++
  2 files changed, 10 insertions(+)
docs/about/deprecated.rst +8 -0
index ff3da68208ac..5d9e4d8de725 100644
@@ -256,6 +256,14 @@ images are not available, OpenWRT dropped support in 2019, U-Boot in
  2017, Linux also is dropping support in 2024. It is time to let go of
  this ancient hardware and focus on newer CPUs and platforms.
 
+Arm ``tacoma-bmc`` machine (since 9.1)
+''''''''''''''''''''''''''''''''''''''''
+
+The ``tacoma-bmc`` machine was a board including an AST2600 SoC based
+BMC and a witherspoon like OpenPOWER system. It was used for bring up
+of the AST2600 SoC in labs.  It can be easily replaced by the
+``rainier-bmc`` machine which is a real product.
+
  Backend options
  ---------------
 
hw/arm/aspeed.c +2 -0
index 40dc0e4c76db..53a4f665d0d0 100644
@@ -1379,6 +1379,8 @@ static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data)
      amc->i2c_init  = witherspoon_bmc_i2c_init; /* Same board layout */
      mc->default_ram_size = 1 * GiB;
      aspeed_machine_class_init_cpus_defaults(mc);
+
+    mc->deprecation_reason = "Please use the similar 'rainier-bmc' machine";
  };
 
  static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data)
#3 lore raw
In reply to Cédric Le Goater

Hi,

Quoted 6 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

I have been using tacoma-bmc to test tcg,tpm-tis-i2c functionality on arm. rainier-bmc doesn't support that, and other IBM BMCs which do support it (bonnell, everest, system1) are not supported in qemu.

Do you have a suggested alternative ?

Thanks,
Guenter

#4 lore raw

Hello Guenter,

Quoted 8 lines · Guenter Roeck

Hi,

Quoted 5 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

Quoted 7 lines
Quoted 1 line

I have been using tacoma-bmc to test tcg,tpm-tis-i2c functionality on arm. rainier-bmc doesn't support that, and other IBM BMCs which do support it (bonnell, everest, system1) are not supported in qemu.

Do you have a suggested alternative ?

Could you use the ast2600-evb machine instead ? as done in machine_aspeed.py, see routine test_arm_ast2600_evb_buildroot_tpm.

We can't add a "tpm-tis-i2c" device to the tacoma-bmc machine init routine because a TPM backend is required.

Thanks,

C.

#5 lore raw

Hi,

Quoted 13 lines · Cédric Le Goater

Hello Guenter,

Quoted 10 lines · Guenter Roeck

Hi,

Quoted 6 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

Quoted 9 lines
Quoted 5 lines

I have been using tacoma-bmc to test tcg,tpm-tis-i2c functionality on arm. rainier-bmc doesn't support that, and other IBM BMCs which do support it (bonnell, everest, system1) are not supported in qemu.

Do you have a suggested alternative ?

Could you use the ast2600-evb machine instead ? as done in machine_aspeed.py, see routine test_arm_ast2600_evb_buildroot_tpm.

Unfortunately, that does not work for me because that requires instantiating the tpm chip from the CLI by writing into the new_device sysfs attribute, and I can not do that in my test environment.

Quoted 3 lines

We can't add a "tpm-tis-i2c" device to the tacoma-bmc machine init routine because a TPM backend is required.

Not sure I understand; tacoma-bmc instantiates the TPM chip through its devicetree file which is what I was looking for.

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu. It isn't perfect since I don't know the correct HW pin strapping and reused the strapping from Rainier, but it works for me.

Thanks,
Guenter

#6 lore raw
Quoted 22 lines · Guenter Roeck

Hi,

Quoted 19 lines · Cédric Le Goater

Hello Guenter,

Quoted 15 lines · Guenter Roeck

Hi,

Quoted 6 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

I have been using tacoma-bmc to test tcg,tpm-tis-i2c functionality on arm. rainier-bmc doesn't support that, and other IBM BMCs which do support it (bonnell, everest, system1) are not supported in qemu.

Do you have a suggested alternative ?

Quoted 7 lines
Quoted 3 lines

Could you use the ast2600-evb machine instead ? as done in machine_aspeed.py, see routine test_arm_ast2600_evb_buildroot_tpm.

Unfortunately, that does not work for me because that requires instantiating the tpm chip from the CLI by writing into the new_device sysfs attribute, and I can not do that in my test environment.

Ah. too bad.

Quoted 6 lines
Quoted 3 lines

We can't add a "tpm-tis-i2c" device to the tacoma-bmc machine init routine because a TPM backend is required.

Not sure I understand; tacoma-bmc instantiates the TPM chip through its devicetree file which is what I was looking for.

I meant at the "HW" board level in QEMU.

We can not instantiate the TPM I2C chip device model in the tacoma-bmc machine init routine and attach it to the I2C bus because of the required TPM backend. This means that the device is necessarily defined on the QEMU command line and this makes the ast2600-evb and tacoma-bmc machine very similar in terms of HW definitions.

Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

Quoted 2 lines

It isn't perfect since I don't know the correct HW pin strapping and reused the strapping from Rainier, but it works for me.

Keeping the tacoma-bmc machine is fine if there is a use for it. Testing the TPM I2C device driver is certainly a good use but we should reflect that in QEMU also (so that we don't forget). Could we change the test in machine_aspeed.py to use the tacoma-bmc machine instead ? and revert the deprecation patch of course.

Thanks,

C.

#7 lore raw
Quoted 40 lines · Cédric Le Goater
Quoted 22 lines · Guenter Roeck

Hi,

Quoted 19 lines · Cédric Le Goater

Hello Guenter,

Quoted 15 lines · Guenter Roeck

Hi,

Quoted 6 lines · Cédric Le Goater

The tacoma-bmc machine was a board including an AST2600 SoC based BMC and a witherspoon like OpenPOWER system. It was used for bring up of the AST2600 SoC in labs. It can be easily replaced by the rainier-bmc machine which is part of a real product offering.

I have been using tacoma-bmc to test tcg,tpm-tis-i2c functionality on arm. rainier-bmc doesn't support that, and other IBM BMCs which do support it (bonnell, everest, system1) are not supported in qemu.

Do you have a suggested alternative ?

Quoted 7 lines
Quoted 3 lines

Could you use the ast2600-evb machine instead ? as done in machine_aspeed.py, see routine test_arm_ast2600_evb_buildroot_tpm.

Unfortunately, that does not work for me because that requires instantiating the tpm chip from the CLI by writing into the new_device sysfs attribute, and I can not do that in my test environment.

Ah. too bad.

Quoted 6 lines
Quoted 3 lines

We can't add a "tpm-tis-i2c" device to the tacoma-bmc machine init routine because a TPM backend is required.

Not sure I understand; tacoma-bmc instantiates the TPM chip through its devicetree file which is what I was looking for.

Quoted 8 lines

I meant at the "HW" board level in QEMU.

We can not instantiate the TPM I2C chip device model in the tacoma-bmc machine init routine and attach it to the I2C bus because of the required TPM backend. This means that the device is necessarily defined on the QEMU command line and this makes the ast2600-evb and tacoma-bmc machine very similar in terms of HW definitions.

Yes, I found that as well.

Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Quoted 9 lines
Quoted 2 lines

It isn't perfect since I don't know the correct HW pin strapping and reused the strapping from Rainier, but it works for me.

Keeping the tacoma-bmc machine is fine if there is a use for it. Testing the TPM I2C device driver is certainly a good use but we should reflect that in QEMU also (so that we don't forget). Could we change the test in machine_aspeed.py to use the tacoma-bmc machine instead ? and revert the deprecation patch of course.

No need from my perspective. This isn't the only patch I carry on top of upstream qemu, after all.

Thanks,
Guenter

#8 lore raw

Hello,

Quoted 10 lines
Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Oh nice ! Let's merge the IBM Bonnell machine. We can ask IBM to help fixing the definitions (strapping). Enabling the PCA9554 is good to have too.

Why are you keeping the tmp105 changes ? LGTM. Same for the new tmp models, they could be upstreamed.

Thanks,

C.

#9 lore raw
Quoted 9 lines · Cédric Le Goater

Hello,

Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

Quoted 8 lines
Quoted 4 lines

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Oh nice ! Let's merge the IBM Bonnell machine. We can ask IBM to help fixing the definitions (strapping). Enabling the PCA9554 is good to have too.

Sure, let me do that.

Quoted 3 lines

Why are you keeping the tmp105 changes ? LGTM. Same for the new tmp models, they could be upstreamed.

Ok, I'll work on that.

Thanks,
Guenter

maintainer
#10 lore raw
Quoted 11 lines · Guenter Roeck
Quoted 9 lines · Cédric Le Goater

Hello,

Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

Quoted 7 lines
Quoted 7 lines
Quoted 4 lines

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Oh nice ! Let's merge the IBM Bonnell machine. We can ask IBM to help fixing the definitions (strapping). Enabling the PCA9554 is good to have too.

Instead of adding Bonnell to qemu, could we use the Rainier machine? I know the kernel device tree removed the i2c tpm, but there's no harm in it being present in the qemu machine.

The bonnell device tree should boot fine on the rainier machine for your purposes.

Cheers,

Joel

#11 lore raw
Quoted 20 lines · Joel Stanley
Quoted 11 lines · Guenter Roeck
Quoted 9 lines · Cédric Le Goater

Hello,

Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

Quoted 7 lines
Quoted 7 lines
Quoted 4 lines

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Oh nice ! Let's merge the IBM Bonnell machine. We can ask IBM to help fixing the definitions (strapping). Enabling the PCA9554 is good to have too.

Quoted 7 lines

Instead of adding Bonnell to qemu, could we use the Rainier machine? I know the kernel device tree removed the i2c tpm, but there's no harm in it being present in the qemu machine.

The bonnell device tree should boot fine on the rainier machine for your purposes.

Yes, I confirmed that works. Ok, I'll do that.

Thanks,
Guenter

#12 lore raw
Quoted 25 lines · Guenter Roeck
Quoted 24 lines · Joel Stanley
Quoted 11 lines · Guenter Roeck
Quoted 9 lines · Cédric Le Goater

Hello,

Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

Quoted 7 lines
Quoted 7 lines
Quoted 4 lines

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Oh nice ! Let's merge the IBM Bonnell machine. We can ask IBM to help fixing the definitions (strapping). Enabling the PCA9554 is good to have too.

Instead of adding Bonnell to qemu, could we use the Rainier machine? I know the kernel device tree removed the i2c tpm, but there's no harm in it being present in the qemu machine.

Quoted 5 lines
Quoted 3 lines

The bonnell device tree should boot fine on the rainier machine for your purposes.

Yes, I confirmed that works. Ok, I'll do that.

So I will drop the bonnell to avoid redundancy. Is that OK ?

Thanks,

C.

#13 lore raw
Quoted 26 lines · Cédric Le Goater
Quoted 25 lines · Guenter Roeck
Quoted 24 lines · Joel Stanley
Quoted 11 lines · Guenter Roeck
Quoted 9 lines · Cédric Le Goater

Hello,

Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

I solved the problem by adding support for IBM Bonnell (which instantiates the TPM chip through its devicetree file, similar to tacoma-bmc) to my local copy of qemu.

Hmm, did you copy the rainier-bmc machine definition ?

Quoted 7 lines
Quoted 7 lines
Quoted 4 lines

For aspeed_machine_bonnell_class_init(), pretty much yes, since I don't know the actual hardware. For I2C initialization I used the devicetree file. You can find the patch in the master-local or v9.1.0-local branches of my qemu clone at https://github.com/groeck/qemu if you are interested.

Oh nice ! Let's merge the IBM Bonnell machine. We can ask IBM to help fixing the definitions (strapping). Enabling the PCA9554 is good to have too.

Instead of adding Bonnell to qemu, could we use the Rainier machine? I know the kernel device tree removed the i2c tpm, but there's no harm in it being present in the qemu machine.

Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

The bonnell device tree should boot fine on the rainier machine for your purposes.

Yes, I confirmed that works. Ok, I'll do that.

So I will drop the bonnell to avoid redundancy. Is that OK ?

Ok with me.

Guenter