Loadbalancing how to ? ? ? ?
Witaj ro0ot,
W Twoim liœcie datowanym 3 lipca 2005 (18:25:32) mo¿na przeczytaæ:
r> Is it possible to combine the 2 or 4 ADSL line into 1 line (big pipe)?
As I already wrote: Yes, (more or less :) with some limitations. All those "blind" loadbalancing solutions have one BIG drawback - they work for setups with lots and lots of concurent connections [cause single connection has to use single line], and one smaller but annoying - they cannot guarantee that subsequent reqests to the same host will use the same source IP - home banking affected most.
r> Regards,
r> ro0ot
Quoted 26 lines · r> Robert Kurjata wrote:
Quoted 26 lines
Witaj Cao,
W Twoim liœcie datowanym 2 lipca 2005 (17:40:05) mo¿na przeczytaæ:
CVK> I have 2 ADSL ad1 and ad2 , one PC for my firewall and some CVK> deamon on it with 3 ethernet : eth0 connect to my LAN (
This question comes and goes on this list :)
Please read information at: http://www.ssi.bg/~ja/ , especially http://www.ssi.bg/~ja/nano.txt
and you can try my script http://www.ssi.bg/~ja/tmp/mpath2.sh to
load balance 2 (or more - I was using 4) connections with great
success. No daemon needed :)There are also other solutions in list archive.
IMHO the routing code has precedence over iptables so it chooses the outgoing interface over which the iptables will SNAT in input routing process. And thats why you will not see the effect in this setup (thi interface has already been chosen). It is possible (and reasonable) to SNAT to multiple IPs residing on one interface.
Correct me if I'm wrong, please...:)
Signature · 7 lines
Pozdrowienia, Robert _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi
in this case merging of all links to one big pipe
what if the one of the link fails.. its automatically detect
and combine rest of the links or it keep tries to send the packets dead
gateway
for example
if i have 3 links.. one fails.. rest 2 become one (big pipe) link right ?
or any other configuration required ?? or you given script works ??
hare
----- Original Message -----
From: "Robert Kurjata" <[email protected]>
To: "ro0ot" <[email protected]>
Cc: "Linux Advanced Routing" <[email protected]>
Sent: Sunday, July 03, 2005 11:53 PM
Subject: Re[2]: [LARTC] Loadbalancing how to ? ? ? ?
Quoted 43 lines
Witaj ro0ot,
W Twoim liœcie datowanym 3 lipca 2005 (18:25:32) mo¿na przeczytaæ:
r> Is it possible to combine the 2 or 4 ADSL line into 1 line (big pipe)?
As I already wrote: Yes, (more or less :) with some limitations. All those "blind" loadbalancing solutions have one BIG drawback - they work for setups with lots and lots of concurent connections [cause single connection has to use single line], and one smaller but annoying - they cannot guarantee that subsequent reqests to the same host will use the same source IP - home banking affected most.
r> Regards,
r> ro0otQuoted 23 lines · r> Robert Kurjata wrote:
Quoted 23 lines
Witaj Cao,
W Twoim liœcie datowanym 2 lipca 2005 (17:40:05) mo¿na przeczytaæ:
CVK> I have 2 ADSL ad1 and ad2 , one PC for my firewall and some CVK> deamon on it with 3 ethernet : eth0 connect to my LAN (
This question comes and goes on this list :)
Please read information at: http://www.ssi.bg/~ja/ , especially
http://www.ssi.bg/~ja/nano.txt
and you can try my script http://www.ssi.bg/~ja/tmp/mpath2.sh to load balance 2 (or more - I was using 4) connections with great success. No daemon needed :)There are also other solutions in list archive.
IMHO the routing code has precedence over iptables so it chooses the outgoing interface over which the iptables will SNAT in input routing process. And thats why you will not see the effect in this setup (thi interface has already been chosen). It is possible (and reasonable) to SNAT to multiple IPs residing on one interface.
Quoted 18 lines
Quoted 4 lines
Quoted 4 lines
Correct me if I'm wrong, please...:)
Signature · 7 lines
Pozdrowienia, Robert _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
yes , I would like to findout the solution for this situation too
Quoted 91 lines · hareram
Hi
in this case merging of all links to one big pipe
what if the one of the link fails.. its automatically detect
and combine rest of the links or it keep tries to send the packets dead
gatewayfor example
if i have 3 links.. one fails.. rest 2 become one (big pipe) link right ?
or any other configuration required ?? or you given script works ??
hare
----- Original Message -----
From: "Robert Kurjata" <[email protected]>
To: "ro0ot" <[email protected]>
Cc: "Linux Advanced Routing" <[email protected]>
Sent: Sunday, July 03, 2005 11:53 PM
Subject: Re[2]: [LARTC] Loadbalancing how to ? ? ? ?Quoted 51 lines
Witaj ro0ot,
W Twoim liście datowanym 3 lipca 2005 (18:25:32) można przeczytać:
r> Is it possible to combine the 2 or 4 ADSL line into 1 line (big pipe)?
As I already wrote: Yes, (more or less :) with some limitations. All those "blind" loadbalancing solutions have one BIG drawback - they work for setups with lots and lots of concurent connections [cause single connection has to use single line], and one smaller but annoying - they cannot guarantee that subsequent reqests to the same host will use the same source IP - home banking affected most.
r> Regards,
r> ro0otQuoted 23 lines · r> Robert Kurjata wrote:
Quoted 23 lines
Witaj Cao,
W Twoim liście datowanym 2 lipca 2005 (17:40:05) można przeczytać:
CVK> I have 2 ADSL ad1 and ad2 , one PC for my firewall and some CVK> deamon on it with 3 ethernet : eth0 connect to my LAN (
This question comes and goes on this list :)
Please read information at: http://www.ssi.bg/~ja/ , especially
http://www.ssi.bg/~ja/nano.txt
and you can try my script http://www.ssi.bg/~ja/tmp/mpath2.sh to load balance 2 (or more - I was using 4) connections with great success. No daemon needed :)There are also other solutions in list archive.
IMHO the routing code has precedence over iptables so it chooses the outgoing interface over which the iptables will SNAT in input routing process. And thats why you will not see the effect in this setup (thi interface has already been chosen). It is possible (and reasonable) to SNAT to multiple IPs residing on one interface.
Quoted 4 lines
Quoted 4 lines
Correct me if I'm wrong, please...:)
Quoted 10 lines
--
Pozdrowienia,
Robert_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 2 lines
------------------------------- Cao Van Khanh
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc