Skip to contentSkip to conversation

5 out of 6 Volumes Vanished!

linux-lvm Mache Creeger 2 participants 4 messages Oct 31, 2006 – Nov 1, 2006

lore
Share & tools
lore
#0 lore raw

Most of my volumes have vanished, except for Vol0. I had 6 volumes set up with lvm. Vol5 had 600 GB of data running over RAID5 using XFS.

Can anyone help.

Here are some diagnostics.

-- Mache Creeger

# mdadm -A /dev/md0
mdadm: device /dev/md0 already active - cannot assemble it
# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : inactive hdi1[5](S) hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
      1172151808 blocks

unused devices: <none>

# more /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : inactive hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
      976791040 blocks
# mdadm --detail /dev/md0
/dev/md0:
Version : 00.90.03
Creation Time : Sat Apr  8 10:01:48 2006
Raid Level : raid5
Device Size : 195358208 (186.31 GiB 200.05 GB)
Raid Devices : 6
Total Devices : 5
Preferred Minor : 0
Persistence : Superblock is persistent

Update Time : Sat Oct 21 22:30:40 2006
State : active, degraded
Active Devices : 5
Working Devices : 5
Failed Devices : 0
Spare Devices : 0

Layout : left-symmetric
Chunk Size : 256K

UUID : 0e3284f1:bf1053ea:e580013b:368be46b
Events : 0.3090999

Number Major Minor RaidDevice State

0       3       65        0      active sync   /dev/hdb1
1      33        1        1      active sync   /dev/hde1
2      33       65        2      active sync   /dev/hdf1
3      34        1        3      active sync   /dev/hdg1
4      34       65        4      active sync   /dev/hdh1

0 0 0 0 removed

# more /etc/fstab
/dev/VolGroup00/LogVol00 /                       ext3    defaults        1 1
LABEL=/boot             /boot                   ext3    defaults        1 2
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
/dev/VolGroup04/LogVol04 /opt                    ext3    defaults        1 2
/dev/VolGroup05/LogVol05 /opt/bigdisk            xfs     defaults        1 2
proc                    /proc                   proc    defaults        0 0
sysfs                   /sys                    sysfs   defaults        0 0
/dev/VolGroup01/LogVol01 /usr                    ext3    defaults        1 2
/dev/VolGroup02/LogVol02 /var                    ext3    defaults        1 2
/dev/VolGroup03/LogVol03 swap                    swap    defaults        0 0
# xfs_repair /dev/VolGroup05/LogVol05
/dev/VolGroup05/LogVol05: No such file or directory

fatal error -- couldn't initialize XFS library

#1 lore raw

I'm not clear on how your LVM volume groups are mapped to the underlying devices; and sadly, I'm not that familiar with md or its terminology. What does "inactive" mean? Your first command suggest that /dev/md0 is active, but the second says it is inactive... In any case, if the md devices are not available and your LVM volume groups are composed of MD devices, that would explain why you are not seeing your volume groups.

You could look are your various LVM backup files (located in /etc/lvm/backup/<vg name>), see what devices they are using and check whether the system sees those devices...

brassow

Quoted 91 lines · Mache Creeger

Most of my volumes have vanished, except for Vol0.� I had 6 volumes
set up with lvm.� Vol5 had 600 GB of data running over RAID5 using XFS.�

Can anyone help.�

Here are some diagnostics.�

-- Mache Creeger

# mdadm -A /dev/md0
 mdadm: device /dev/md0 already active - cannot assemble it
 # cat /proc/mdstat
 Personalities : [raid6] [raid5] [raid4]
 md0 : inactive hdi1[5](S) hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
 ����� 1172151808 blocks

unused devices: <none>

 # more /proc/mdstat
 Personalities : [raid6] [raid5] [raid4]
 md0 : inactive hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
 ����� 976791040 blocks
 # mdadm --detail /dev/md0
 /dev/md0:
 Version : 00.90.03
 Creation Time : Sat Apr� 8 10:01:48 2006
 Raid Level : raid5
 Device Size : 195358208 (186.31 GiB 200.05 GB)
 Raid Devices : 6
 Total Devices : 5
 Preferred Minor : 0
 Persistence : Superblock is persistent

Update Time : Sat Oct 21 22:30:40 2006
State : active, degraded
Active Devices : 5
Working Devices : 5
Failed Devices : 0
Spare Devices : 0

Layout : left-symmetric
Chunk Size : 256K

UUID : 0e3284f1:bf1053ea:e580013b:368be46b
Events : 0.3090999

Number�� Major�� Minor�� RaidDevice State 0������ 3������ 65������� 0����� active sync�� /dev/hdb1 1����� 33������� 1������� 1����� active sync�� /dev/hde1 2����� 33������ 65������� 2����� active sync�� /dev/hdf1 3����� 34������� 1������� 3����� active sync�� /dev/hdg1 4����� 34������ 65������� 4����� active sync�� /dev/hdh1 0������ 0������� 0������ 0����� removed

 # more /etc/fstab
 /dev/VolGroup00/LogVol00 /���������������������� ext3��� 
defaults������� 1 1
 LABEL=/boot������������ /boot������������������ ext3��� 
defaults������� 1 2
 devpts����������������� /dev/pts��������������� devpts� 
gid=5,mode=620� 0 0
 tmpfs������������������ /dev/shm��������������� tmpfs�� 
defaults������� 0 0
 /dev/VolGroup04/LogVol04 /opt������������������� ext3��� 
defaults������� 1 2
 /dev/VolGroup05/LogVol05 /opt/bigdisk����������� xfs���� 
defaults������� 1 2
 proc������������������� /proc������������������ proc��� 
defaults������� 0 0
 sysfs������������������ /sys������������������� sysfs�� 
defaults������� 0 0
 /dev/VolGroup01/LogVol01 /usr������������������� ext3��� 
defaults������� 1 2
 /dev/VolGroup02/LogVol02 /var������������������� ext3��� 
defaults������� 1 2
 /dev/VolGroup03/LogVol03 swap������������������� swap��� 
defaults������� 0 0
 # xfs_repair /dev/VolGroup05/LogVol05
 /dev/VolGroup05/LogVol05: No such file or directory

fatal error -- couldn't initialize XFS library

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#2 lore raw

I understand about the md issue, but that only addresses Vol05 and does not address the other volumes that are gone. Any ideas about Vol01 to Vol04?

-- Mache

Quoted 101 lines · Jonathan E Brassow

I'm not clear on how your LVM volume groups are mapped to the underlying devices; and sadly, I'm not that familiar with md or its terminology. What does "inactive" mean? Your first command suggest that /dev/md0 is active, but the second says it is inactive... In any case, if the md devices are not available and your LVM volume groups are composed of MD devices, that would explain why you are not seeing your volume groups.

You could look are your various LVM backup files (located in /etc/lvm/backup/<vg name>), see what devices they are using and check whether the system sees those devices...

brassow

Quoted 78 lines · Mache Creeger

Most of my volumes have vanished, except for Vol0. I had 6
volumes set up with lvm. Vol5 had 600 GB of data running over RAID5 using XFS.

Can anyone help.

Here are some diagnostics.

-- Mache Creeger

# mdadm -A /dev/md0
 mdadm: device /dev/md0 already active - cannot assemble it
 # cat /proc/mdstat
 Personalities : [raid6] [raid5] [raid4]
 md0 : inactive hdi1[5](S) hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
       1172151808 blocks

unused devices: <none>

 # more /proc/mdstat
 Personalities : [raid6] [raid5] [raid4]
 md0 : inactive hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
       976791040 blocks
 # mdadm --detail /dev/md0
 /dev/md0:
 Version : 00.90.03
 Creation Time : Sat Apr  8 10:01:48 2006
 Raid Level : raid5
 Device Size : 195358208 (186.31 GiB 200.05 GB)
 Raid Devices : 6
 Total Devices : 5
 Preferred Minor : 0
 Persistence : Superblock is persistent

Update Time : Sat Oct 21 22:30:40 2006
State : active, degraded
Active Devices : 5
Working Devices : 5
Failed Devices : 0
Spare Devices : 0

Layout : left-symmetric
Chunk Size : 256K

UUID : 0e3284f1:bf1053ea:e580013b:368be46b
Events : 0.3090999

Number Major Minor RaidDevice State

 0       3       65        0      active sync   /dev/hdb1
 1      33        1        1      active sync   /dev/hde1
 2      33       65        2      active sync   /dev/hdf1
 3      34        1        3      active sync   /dev/hdg1
 4      34       65        4      active sync   /dev/hdh1

0 0 0 0 removed

 # more /etc/fstab
 /dev/VolGroup00/LogVol00 
/                       ext3    defaults        1 1
 LABEL=/boot             /boot                   ext3    defaults        1 2
 devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
 tmpfs                   /dev/shm                tmpfs   defaults        0 0
 /dev/VolGroup04/LogVol04 
/opt                    ext3    defaults        1 2
 /dev/VolGroup05/LogVol05 
/opt/bigdisk            xfs     defaults        1 2
 proc                    /proc                   proc    defaults        0 0
 sysfs                   /sys                    sysfs   defaults        0 0
 /dev/VolGroup01/LogVol01 
/usr                    ext3    defaults        1 2
 /dev/VolGroup02/LogVol02 
/var                    ext3    defaults        1 2
 /dev/VolGroup03/LogVol03 
swap                    swap    defaults        0 0
 # xfs_repair /dev/VolGroup05/LogVol05
 /dev/VolGroup05/LogVol05: No such file or directory
Quoted 8 lines

fatal error -- couldn't initialize XFS library

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#3 lore raw

What's the output of 'cat /proc/partitions; pvs; vgs; lvs; cat /etc/lvm/backup/Vol01'?

brassow

Quoted 110 lines · Mache Creeger

I understand about the md issue, but that only addresses Vol05 and does not address the other volumes that are gone.  Any ideas about Vol01 to Vol04?

-- Mache

Quoted 99 lines · Jonathan E Brassow

I'm not clear on how your LVM volume groups are mapped to the underlying devices; and sadly, I'm not that familiar with md or its terminology.  What does "inactive" mean?  Your first command suggest that /dev/md0 is active, but the second says it is inactive...  In any case, if the md devices are not available and your LVM volume groups are composed of MD devices, that would explain why you are not seeing your volume groups.

You could look are your various LVM backup files (located in
/etc/lvm/backup/<vg name>), see what devices they are using and check whether the system sees those devices...

 brassow

Quoted 82 lines · Mache Creeger

 Most of my volumes have vanished, except for Vol0.  I had 6 volumes set up with lvm.  Vol5 had 600 GB of data running over RAID5 using XFS.

 Can anyone help.

 Here are some diagnostics.

 -- Mache Creeger

 # mdadm -A /dev/md0
  mdadm: device /dev/md0 already active - cannot assemble it
  # cat /proc/mdstat
  Personalities : [raid6] [raid5] [raid4]
  md0 : inactive hdi1[5](S) hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
        1172151808 blocks

 unused devices: <none>

  # more /proc/mdstat
  Personalities : [raid6] [raid5] [raid4]
  md0 : inactive hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]
        976791040 blocks
  # mdadm --detail /dev/md0
  /dev/md0:
  Version : 00.90.03
  Creation Time : Sat Apr  8 10:01:48 2006
  Raid Level : raid5
  Device Size : 195358208 (186.31 GiB 200.05 GB)
  Raid Devices : 6
  Total Devices : 5
  Preferred Minor : 0
  Persistence : Superblock is persistent

 Update Time : Sat Oct 21 22:30:40 2006
 State : active, degraded
 Active Devices : 5
 Working Devices : 5
 Failed Devices : 0
 Spare Devices : 0

 Layout : left-symmetric
 Chunk Size : 256K

 UUID : 0e3284f1:bf1053ea:e580013b:368be46b
 Events : 0.3090999

 Number   Major   Minor   RaidDevice State
 0       3       65        0      active sync   /dev/hdb1 1      33        1        1      active sync   /dev/hde1 2      33       65        2      active sync   /dev/hdf1 3      34        1        3      active sync   /dev/hdg1 4      34       65        4      active sync   /dev/hdh1 0       0        0       0      removed

  # more /etc/fstab
  /dev/VolGroup00/LogVol00 /                       ext3    
defaults        1 1
  LABEL=/boot             /boot                   ext3    
defaults        1 2
  devpts                  /dev/pts                devpts  
gid=5,mode=620  0 0
  tmpfs                   /dev/shm                tmpfs   
defaults        0 0
  /dev/VolGroup04/LogVol04 /opt                    ext3    
defaults        1 2
  /dev/VolGroup05/LogVol05 /opt/bigdisk            xfs     
defaults        1 2
  proc                    /proc                   proc    
defaults        0 0
  sysfs                   /sys                    sysfs   
defaults        0 0
  /dev/VolGroup01/LogVol01 /usr                    ext3    
defaults        1 2
  /dev/VolGroup02/LogVol02 /var                    ext3    
defaults        1 2
  /dev/VolGroup03/LogVol03 swap                    swap    
defaults        0 0
  # xfs_repair /dev/VolGroup05/LogVol05
  /dev/VolGroup05/LogVol05: No such file or directory
Quoted 8 lines

 fatal error -- couldn't initialize XFS library

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

Quoted 6 lines

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

Quoted 5 lines

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

What's the output of 'cat /proc/partitions; pvs; vgs; lvs; cat /etc/lvm/backup/Vol01'?

brassow

On Nov 1, 2006, at 4:31 PM, Mache Creeger wrote:

<excerpt>I understand about the md issue, but that only addresses Vol05 and does not address the other volumes that are gone.  Any ideas about Vol01 to Vol04?

-- Mache

At 09:40 AM 11/1/2006, Jonathan E Brassow wrote:

<excerpt>I'm not clear on how your LVM volume groups are mapped to the underlying devices; and sadly, I'm not that familiar with md or its terminology.  What does "inactive" mean?  Your first command suggest that /dev/md0 is active, but the second says it is inactive...  In any case, if the md devices are not available and your LVM volume groups are composed of MD devices, that would explain why you are not seeing your volume groups.

You could look are your various LVM backup files (located in
/etc/lvm/backup/<<vg name>), see what devices they are using and check whether the system sees those devices...

 brassow

On Oct 31, 2006, at 4:56 PM, Mache Creeger wrote:

<excerpt> Most of my volumes have vanished, except for Vol0.  I had 6 volumes set up with lvm.  Vol5 had 600 GB of data running over RAID5 using XFS.

 Can anyone help.

 Here are some diagnostics.

 -- Mache Creeger

 # mdadm -A /dev/md0

 mdadm: device /dev/md0 already active - cannot assemble it

  # cat /proc/mdstat

 Personalities : [raid6] [raid5] [raid4]

 md0 : inactive hdi1[5](S) hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]

       1172151808 blocks

 unused devices: <<none>

  # more /proc/mdstat

 Personalities : [raid6] [raid5] [raid4]

 md0 : inactive hdb1[0] hdh1[4] hdg1[3] hdf1[2] hde1[1]

       976791040 blocks

  # mdadm --detail /dev/md0

 /dev/md0:

 Version : 00.90.03

 Creation Time : Sat Apr  8 10:01:48 2006

 Raid Level : raid5

 Device Size : 195358208 (186.31 GiB 200.05 GB)

 Raid Devices : 6

 Total Devices : 5

 Preferred Minor : 0

 Persistence : Superblock is persistent

 Update Time : Sat Oct 21 22:30:40 2006

 State : active, degraded

 Active Devices : 5

 Working Devices : 5

 Failed Devices : 0

 Spare Devices : 0

 Layout : left-symmetric

 Chunk Size : 256K

 UUID : 0e3284f1:bf1053ea:e580013b:368be46b

 Events : 0.3090999

 Number   Major   Minor   RaidDevice State

 0       3       65        0      active sync   /dev/hdb1

 1      33        1        1      active sync   /dev/hde1

 2      33       65        2      active sync   /dev/hdf1

 3      34        1        3      active sync   /dev/hdg1

 4      34       65        4      active sync   /dev/hdh1

 0       0        0       0      removed

  # more /etc/fstab

 /dev/VolGroup00/LogVol00 /                       ext3
defaults        1 1

 LABEL=/boot             /boot                   ext3
defaults        1 2

 devpts                  /dev/pts                devpts
gid=5,mode=620  0 0

 tmpfs                   /dev/shm                tmpfs
defaults        0 0

 /dev/VolGroup04/LogVol04 /opt                    ext3
defaults        1 2

 /dev/VolGroup05/LogVol05 /opt/bigdisk            xfs
defaults        1 2

 proc                    /proc                   proc
defaults        0 0

 sysfs                   /sys                    sysfs
defaults        0 0

 /dev/VolGroup01/LogVol01 /usr                    ext3
defaults        1 2

 /dev/VolGroup02/LogVol02 /var                    ext3
defaults        1 2

 /dev/VolGroup03/LogVol03 swap                    swap
defaults        0 0

  # xfs_repair /dev/VolGroup05/LogVol05

 /dev/VolGroup05/LogVol05: No such file or directory

 fatal error -- couldn't initialize XFS library

_______________________________________________

linux-lvm mailing list

[email protected]

<color><param>0000,0000,EEEE</param>https://www.redhat.com/mailman/listinfo/linux-lvm</color>

read the LVM HOW-TO at
<color><param>0000,0000,EEEE</param>http://tldp.org/HOWTO/LVM-HOWTO/</color>

</excerpt> _______________________________________________

linux-lvm mailing list

[email protected]

<color><param>0000,0000,EEEE</param>https://www.redhat.com/mailman/listinfo/linux-lvm</color>

read the LVM HOW-TO at
<color><param>0000,0000,EEEE</param>http://tldp.org/HOWTO/LVM-HOWTO/</color>

</excerpt>_______________________________________________

linux-lvm mailing list

[email protected]

https://www.redhat.com/mailman/listinfo/linux-lvm

read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/</excerpt>